ISO 11138-2检测标准

发布时间:2023-02-07 06:19:58 阅读量: 来源:中析研究所

ISO 11138-2相关标准参考信息

KS P ISO 11138-2-2018 保健产品的灭菌 - 生物指标 - 第2部分:环氧乙烷灭菌过程的生物学指标
简介:
信息:ICS:11.080.01 CCS发布:2018-11-05 实施

EN ISO 11138-2-2006
简介:
信息:ICS:/ CCS:/ 发布:2006-07-01 实施:2009-11-26

简介: 信息:

DIN EN ISO 11138-2-2017
简介:
信息:ICS:11.080.20 CCS发布:2017-07 实施

ISO 11138-2-2006 医疗保健产品灭菌.生物指示物.第2部分:环氧乙烷灭菌同生物指示剂
简介:This part of ISO 11138 provides specific requirements for test organisms, suspensions, inoculated carriers, biological indicators and test methods intended for use in assessing the performance of sterilizers and sterilization processes employing ethylene oxide gas as the sterilizing agent, either as pure ethylene oxide gas or mixtures of this gas with diluent gases, at sterilizing temperatures within the range of 29 °C to 65 °C.NOTE 1 Requirements for validation and control of ethylene oxide sterilization processes are provided by ISO 11135.NOTE 2 National or regional regulations could provide requirements for work place safety.
信息:ICS:11.080.01;11.080.20 CCS:C47 发布:2006-07 实施

简介: 信息:

BS EN ISO 11138-2-2017 医疗保健产品灭菌.生物指示剂.环氧乙烷灭菌用生物指示剂
简介:
信息:ICS:11.080.01 CCS:C30 发布:2017-04-30 实施:2017-04-30

ISO 11138-2:2006 保健品灭菌——生物指示剂第2部分:环氧乙烷灭菌工艺用生物指示剂
简介:
信息:ICS:11.080.01 CCS发布:2006-06-26 实施

简介: 信息:

BS EN ISO 11138-2-2017 医疗保健产品灭菌.生物指示剂.环氧乙烷灭菌用生物指示剂
简介:
信息:ICS:11.080.01 CCS:C30 发布:2017-04-30 实施:2017-04-30

ANSI/AAMI/ISO 11138-2-2006 医疗保健产品灭菌.生物指示器.第2部分:环氧乙烷灭菌处理用生物指示器
简介:Provides specific requirements for test organisms and biological indicators intended for use in assessing the performance of sterilizers employing pure ethylene oxide gas or admixtures of the gas with diluent gases at sterilizing temperatures within the range of 20 degrees C to 65 degrees C.
信息:ICS:11.080.99 CCS:C47 发布:2006-03-22 实施

简介: 信息:

ISO 11138-2:2017 保健产品的灭菌 - 生物指标 - 第2部分:环氧乙烷灭菌过程的生物学指标
简介:
信息:ICS:11.080.01 CCS发布:2017-03-03 实施

GOST R ISO 11138-2-2000 医疗卫生产品的杀菌.生物学指标.第2部分:环氧乙烷灭菌的生物学指标
简介:Настоящий стандарт устанавливает специфические требования к тест-микроорганизмам и биологическим индикаторам, предназначенным для оцен
信息:ICS:11.080.01 CCS发布:2000 实施:2002-01-01

简介: 信息:

ISO 11138-2-2017 医疗保健产品消毒. 生物指标. 第2部分: 环氧乙烷灭菌过程生物指标
简介:
信息:ICS:11.080.01 CCS:C47;C30 发布:2017-0301 实施

ISO 11138-2:1994 医疗保健产品的灭菌.生物指示剂.第2部分:环氧乙烷灭菌用生物指示剂
简介:
信息:ICS:11.080.01 CCS发布:1994-10-06 实施

简介: 信息:

ISO 11138-2-2017 医疗保健产品消毒. 生物指标. 第2部分: 环氧乙烷灭菌过程生物指标
简介:
信息:ICS:11.080.01 CCS发布:2017-03-00 实施

ISO 11138-2-1994 医疗保健产品灭菌 生物指示物 第2部分:环氧乙烷灭菌同生物指示物
简介:Provides specific requirements for test organisms and biological indicators intended for use in assessing the performance of sterilizers employing pure ethylene oxide gas or admixtures of the gas with diluent gases at sterilizing temperatures within the range of 20 鳦 to 65 鳦.
信息:ICS:11.080.01 CCS:C10 发布:1994-10 实施

简介: 信息:

EN ISO 11138-2-2017
简介:
信息:ICS:11.080.20 CCS发布:2017-03 实施

简介: 信息:

简介: 信息:

EN ISO 11138-2-2017 医疗保健产品的灭菌生物指示剂-第2部分:环氧乙烷灭菌生物指示剂的过程(ISO 11138-2:2017)
简介:
信息:ICS:11.080.20 CCS:C10 发布:2017-03 实施

简介: 信息:

简介: 信息:

KS P ISO 11138-2-2012 医疗保健产品灭菌.生物指示物.第2部分:环氧乙烷灭菌同生物指示剂
简介:이 표준은 시험균주, 현탁액, 접종된 담체, 생물 지시제에 대해 특별한 요구사항을 제공하고
信息:ICS:11.080.01 CCS:C05 发布:2012-12-27 实施:2012-12-27

简介: 信息:

简介: 信息:

KS P ISO 11138-2-2012 医疗保健产品灭菌.生物指示物.第2部分:环氧乙烷灭菌同生物指示剂
简介:이 표준은 시험균주, 현탁액, 접종된 담체, 생물 지시제에 대해 특별한 요구사항을 제공하고
信息:ICS:11.080.01 CCS:C05 发布:2012-12-27 实施:2012-12-27

简介: 信息:

简介: 信息:

GOST ISO 11138-2-2012 医疗卫生产品的灭菌.生物学指标.第2部分.环氧乙烷灭菌的生物学指标
简介:
信息:ICS:11.080.01 CCS发布:2012 实施:2015-01-01

简介: 信息:

简介: 信息:

BS EN ISO 11138-2-2009 医疗保健产品灭菌.生物指示剂.环氧乙烷灭菌用生物指示剂
简介:This part of ISO 11138 provides specific requirements for test organisms, suspensions, inoculated carriers, biological indicators and test methods intended for use in assessing the performance of sterilizers and sterilization processes employing ethylene oxide gas as the sterilizing agent, either as pure ethylene oxidegas or mixtures of this gas with diluent gases, at sterilizing temperatures within the range of 29 °C to 65 °C.NOTE 1 Requirements for validation and control of ethylene oxide sterilization processes are provided by ISO 11135.NOTE 2 National or regional regulations could provide requirements for work place safety.
信息:ICS:11.080.20 CCS:C05 发布:2009-11-30 实施:2009-11-30

简介: 信息:

简介: 信息:

DIN EN ISO 11138-2-2009 保健产品的灭菌.生物指示剂.第2部分:环氧乙烷灭菌过程的生物指示器(ISO 11138-2-2006).英文版本DIN EN ISO 11138-2-2009-09
简介:This part of ISO 11138 provides specific requirements for test organisms, suspensions, inoculated carriers,biological indicators and test methods intended for use in assessing the performance of sterilizers andsterilization processes employing ethylene oxide gas as the sterilizing agent, either as pure ethylene oxidegas or mixtures of this gas with diluent gases, at sterilizing temperatures within the range of 29℃ to 65℃.NOTE 1 Requirements for validation and control of ethylene oxide sterilization processes are provided by ISO 11135.NOTE 2 National or regional regulations could provide requirements for work place safety.
信息:ICS:11.080.20 CCS:C05 发布:2009-09 实施:2009-09-01

简介: 信息:

简介: 信息:

DIN EN ISO 11138-3-2009 保健产品的消毒.生物指示剂.第3部分:湿热消毒过程的生物指示剂(ISO 11138-2-2006).英文版本DIN EN ISO 11138-3-2009-09
简介:This part of ISO 11138 provides specific requirements for test organisms, suspensions, inoculated carriers,biological indicators and test methods intended for use in assessing the performance of sterilization processesemploying moist heat as the sterilizing agent.Moist heat as the sterilizing agent is defined in this part of ISO 11138 as dry saturated steam. While air-steammixtures may be used in moist heat sterilization processes, the methods and performance requirements ofthis part of ISO 11138 might not be applicable for biological indicators used in such processes.NOTE 1 Requirements for validation and control of moist heat sterilization processes are provided by ISO 17665.NOTE 2 National or regional regulations may provide requirements for work place safety.
信息:ICS:11.080.20 CCS:C05 发布:2009-09 实施:2009-09-01

简介: 信息:

简介: 信息:

LST EN ISO 11138-2-2009
简介:
信息:ICS:11.080.01 CCS发布:2009-08-31 实施:2009-08-31

简介: 信息:

简介: 信息:

DS/EN ISO 11138-2-2009
简介:This part of ISO 11138 provides specific requirements for test organisms, suspensions, inoculated carriers, biological indicators and test methods intended for use in assessing the performance of sterilizers and sterilization processes employing ethylene oxide gas as the sterilizing agent, either as pure ethylene oxide gas or mixtures of this gas with diluent gases, at sterilizing temperatures within the range of 29 °C to 65 °C.NOTE 1 Requirements for validation and control of ethylene oxide sterilization processes are provided by ISO 11135.NOTE 2 National or regional regulations could provide requirements for work place safety.
信息:ICS:11.080.01 CCS发布:2009-07-02 实施:2009-07-02

简介: 信息:

简介: 信息:

EN ISO 11138-2-2009 保健产品的灭菌.生物指示剂.第2部分:环氧乙烷灭菌过程的生物指示器
简介:This part of ISO 11138 provides specific requirements for test organisms, suspensions, inoculated carriers,biological indicators and test methods intended for use in assessing the performance of sterilizers andsterilization processes employing ethylene oxide gas as the sterilizing agent, either as pure ethylene oxidegas or mixtures of this gas with diluent gases, at sterilizing temperatures within the range of 29 ℃ to 65 ℃.
信息:ICS:11.080.01 CCS发布:2009-05-01 实施

简介: 信息:

简介: 信息:

DIN EN ISO 11138-2-2006 医疗保健产品灭菌.生物指示物.第2部分:环氧乙烷灭菌同生物指示剂(ISO 11138-2:2006)
简介:This part of ISO 11138 provides specific requirements for test organisms, suspensions, inoculated carriers, biological indicators and test methods intended for use in assessing the performance of sterilizers and sterilization processes employing ethylene oxide gas as the sterilizing agent, either as pure ethylene oxide gas or mixtures of this gas with diluent gases, at sterilizing temperatures within the range of 29 °C to 65 "C.
信息:ICS:11.080.20 CCS:C30 发布:2006-10 实施

简介: 信息:

简介: 信息:

BS EN ISO 11138-2-2006 医疗保健产品灭菌.生物指示物.环氧乙烷灭菌用生物指示剂
简介:ISO 11138-2:2006 provides specific requirements for test organisms, suspensions, inoculated carriers, biological indicators and test methods intended for use in assessing the performance of sterilizers and sterilization processes employing ethylene oxide gas as the sterilizing agent, either as pure ethylene oxide gas or mixtures of this gas with diluent gases, at sterilizing temperatures within the range of 29 °C to 65 °C.
信息:ICS:11.080.20 CCS:C30 发布:2006-07-31 实施:2006-07-31

简介: 信息:

简介: 信息:

检测标准 ISO 11138-2检测标准

检测资质

权威认证,确保检测数据的准确性和可靠性

CMA认证

CMA认证

中国计量认证

CNAS认证

CNAS认证

中国合格评定国家认可委员会

ISO认证

ISO认证

质量管理体系认证

行业资质

行业资质

多项行业权威认证

了解我们

专业团队,丰富经验,为您提供优质的检测服务

了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们

先进检测设备

引进国际先进仪器设备,确保检测数据的准确性和可靠性

精密检测仪器

精密光谱分析仪

用于材料成分分析和元素检测,精度可达ppm级别

色谱分析仪器

高效液相色谱仪

用于食品安全检测和化学成分分析,分离效率高

材料测试设备

万能材料试验机

用于材料力学性能测试,可进行拉伸、压缩等多种测试

热分析仪器

差示扫描量热仪

用于材料热性能分析,测量相变温度和热焓变化

显微镜设备

扫描电子显微镜

用于材料微观结构观察,分辨率可达纳米级别

环境检测设备

气相色谱质谱联用仪

用于复杂有机化合物的分离和鉴定,灵敏度高

我们的优势

选择中科光析,选择专业与信赖

权威资质

具备CMA、CNAS等多项国家级资质认证,检测报告具有法律效力

先进设备

引进国际先进检测设备,确保检测数据的准确性和可靠性

专业团队

拥有经验丰富的检测工程师和技术专家团队

快速响应

7×24小时服务热线,快速响应客户需求,及时出具检测报告

需要专业检测服务?

我们的专业技术团队随时为您提供咨询和服务支持,欢迎随时联系我们

在线咨询工程师

定制实验方案

24小时专业客服在线

需要检测服务?

专业工程师在线解答

400-640-9567

全国服务热线

查看报告模版