ASTM 2273检测标准

ASTM 2273相关标准参考信息

ASTM E2273-18 用于确定外部绝缘和表面处理系统（EIFS）包层墙组件的排水效率的标准测试方法
简介：
信息：ICS：91.060.10 CCS： 发布：2018-09-01 实施：

ASTM D2273-97(2002)e2 润滑油中微量沉淀物的标准试验方法
简介：
信息：ICS：75.100 CCS： 发布：2002-12-10 实施：

简介： 信息：

ASTM F2273-11(2016) 自行车叉的标准测试方法
简介：
信息：ICS：43.150 CCS： 发布：2016-10-01 实施：

ASTM D2273-97(2002)e1 润滑油中微量沉淀物的标准试验方法
简介：
信息：ICS：75.100 CCS： 发布：2002-12-10 实施：

简介： 信息：

ASTM D2273-08(2016) 润滑油中微量沉淀物的标准试验方法
简介：
信息：ICS：75.100 CCS： 发布：2016-10-01 实施：

ASTM D2273-97 润滑油中微量沉淀物的标准试验方法
简介：
信息：ICS： CCS： 发布：1997-12-10 实施：

简介： 信息：

ASTM D2273-08(2012) 润滑油中微量沉淀物的标准试验方法
简介：
信息：ICS：75.100 CCS： 发布：2012-11-01 实施：

ASTM D2273-1997 润滑油中痕量沉积物的试验方法
简介：1.1 This test method covers the determination of trace amounts (less than 0.05 volume%) of sediment in lubricating oils. Since oil-soluble material precipitated by the specified solvent is not intended as part of the measured sediment, the test method is not applicable in cases where precipitated oil-soluble components will appreciably contribute to the sediment readings. 1.2 The values stated in acceptable SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.>
信息：ICS： CCS：E34 发布：1997 实施：

简介： 信息：

ASTM F2273-11 自行车叉的标准测试方法
简介：
信息：ICS：43.150 CCS： 发布：2011-05-01 实施：

ASTM D2273-1997(2002)e1
简介：1.1 This test method covers the determination of trace amounts (less than 0.05 volume %) of sediment in lubricating oils. Since oil-soluble material precipitated by the specified solvent is not intended as part of the measured sediment, the test method is not applicable in cases where precipitated oil-soluble components will appreciably contribute to the sediment readings.1.2 The values stated in acceptable SI units are to be regarded as the standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.100 (Lubricants, industrial oils and related pr CCS： 发布：1997 实施：

简介： 信息：

ASTM E2273-03(2011) 用于确定外部绝缘和表面处理系统（EIFS）包层墙组件的排水效率的标准测试方法
简介：
信息：ICS：91.060.10 CCS： 发布：2011-04-01 实施：

ASTM D2273-1997(2002)e2
简介：1.1 This test method covers the determination of trace amounts (less than 0.05 volume %) of sediment in lubricating oils. Since oil-soluble material precipitated by the specified solvent is not intended as part of the measured sediment, the test method is not applicable in cases where precipitated oil-soluble components will appreciably contribute to the sediment readings.1.2 The values stated in acceptable SI units are to be regarded as the standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.100 (Lubricants, industrial oils and related pr CCS： 发布：1997 实施：

简介： 信息：

ASTM F2273-2011(2016)
简介：5.1x00a0;These tests are used to determine the conformance of a bicycle fork sample to a standard specified for each use classification. 1.1x00a0;These test methods describe mechanical tests for determining the following performance properties: 1.1.1x00a0;Compression Load, 1.1.2x00a0;Bending Load, 1.1.3x00a0;Impact Resistance, and 1.1.4x00a0;Bending Fatigue Life (followed by Impact Resistance). 1.2x00a0;The values stated in SI units are to be regarded as standard. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：43.150 CCS： 发布：2011 实施：

ASTM D2273-08(2016) 润滑油中微量沉淀物的标准试验方法
简介：
信息：ICS：75.100 CCS：/ 发布：0000-00-00 实施：0000-00-00

简介： 信息：

ASTM F2273-2011 自行车叉架的标准试验方法
简介：These tests are used to determine the conformance of a bicycle fork sample to a standard specified for each use classification.1.1 These test methods describe mechanical tests for determining the following performance properties: 1.1.1 Compression Load, 1.1.2 Bending Load, 1.1.3 Impact Resistance, and 1.1.4 Bending Fatigue Life (followed by Impact Resistance). 1.2 The values stated in SI units are to be regarded as standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：43.150 (Cycles) CCS：Y14 发布：2011 实施：

简介： 信息：

简介： 信息：

ANSI/ASTM F2273-2011 自行车车叉的试验方法
简介：
信息：ICS：43.150 CCS：Y14 发布：2011 实施：

简介： 信息：

简介： 信息：

ASTM D2273-08 润滑油中微量沉淀物的标准试验方法
简介：
信息：ICS：75.100 CCS： 发布：2008-05-01 实施：

简介： 信息：

简介： 信息：

ASTM D2273-2008(2012) 润滑油中痕量沉积物的标准试验方法
简介：4. Significance and UseTop Bottom 4.1 This test measures the trace level amount of sediment that is naphtha-insoluble and can be separated by centrifuging. Excessive amounts of sediment in oil could lead to system malfunction in critical applications. 1.1 This test method covers the determination of trace amounts (less than 0.05 volume8201;%) of sediment in lubricating oils. Since oil-soluble material precipitated by the specified solvent is not intended as part of the measured sediment, the test method is not applicable in cases where precipitated oil-soluble components will appreciably contribute to the sediment readings. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.100 (Lubricants, industrial oils and related pr CCS：E34 发布：2008 实施：

简介： 信息：

简介： 信息：

ASTM D2273-2008 润滑油中痕量沉积物的标准试验方法
简介：This test measures the trace level amount of sediment that is naphtha-insoluble and can be separated by centrifuging. Excessive amounts of sediment in oil could lead to system malfunction in critical applications.1.1 This test method covers the determination of trace amounts (less than 0.05 volume %) of sediment in lubricating oils. Since oil-soluble material precipitated by the specified solvent is not intended as part of the measured sediment, the test method is not applicable in cases where precipitated oil-soluble components will appreciably contribute to the sediment readings. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.100 (Lubricants, industrial oils and related pr CCS：E34 发布：2008 实施：

简介： 信息：

简介： 信息：

ASTM D2273-2008(2016)
简介：4.1x00a0;This test measures the trace level amount of sediment that is naphtha-insoluble and can be separated by centrifuging. Excessive amounts of sediment in oil could lead to system malfunction in critical applications. 1.1x00a0;This test method covers the determination of trace amounts (less than 0.058201;% by volume) of sediment in lubricating oils. Since oil-soluble material precipitated by the specified solvent is not intended as part of the measured sediment, the test method is not applicable in cases where precipitated oil-soluble components will appreciably contribute to the sediment readings. 1.2x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.100 CCS： 发布：2008 实施：

简介： 信息：

简介： 信息：

ASTM D2273-05 润滑油中微量沉淀物的标准试验方法
简介：
信息：ICS：75.100 CCS： 发布：2005-11-01 实施：

简介： 信息：

简介： 信息：

ASTM D2273-2005 润滑油中痕量沉积物的试验方法
简介：This test measures the trace level amount of sediment that is naphtha-insoluble and can be separated by centrifuging. Excessive amounts of sediment in oil could lead to system malfunction in critical applications.1.1 This test method covers the determination of trace amounts (less than 0.05 volume %) of sediment in lubricating oils. Since oil-soluble material precipitated by the specified solvent is not intended as part of the measured sediment, the test method is not applicable in cases where precipitated oil-soluble components will appreciably contribute to the sediment readings.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.100 (Lubricants, industrial oils and related pr CCS：E34 发布：2005 实施：

简介： 信息：

简介： 信息：

ASTM F2273-03 自行车叉的标准测试方法
简介：
信息：ICS：43.150 CCS： 发布：2003-07-10 实施：

简介： 信息：

简介： 信息：

ASTM E2273-03 用于确定外部绝缘和表面处理系统（EIFS）包层墙组件的排水效率的标准测试方法
简介：
信息：ICS：91.060.10 CCS： 发布：2003-04-10 实施：

简介： 信息：

简介： 信息：

ASTM E2273-2003 测定外保温层和装修层?EIFS)包覆的墙壁组件的排水效率的标准试验方法
简介：This test method is a standard procedure for determining the drainage efficiency of an EIFS clad wall assembly.1.1 This test method determines the drainage efficiency of EIFS clad wall assemblies when subjected to a water spray rate in accordance with Test Method E 331.1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parenthesis are for information only.1.3 This standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：91.060.10 (Walls. Partitions. Facades) CCS：A29 发布：2003 实施：

简介： 信息：

简介： 信息：

ASTM E2273-2003(2011) 测定外绝缘和抛光系统(EIFS)覆层墙壁组件排水效率的标准试验方法
简介：This test method is a standard procedure for determining the drainage efficiency of an EIFS clad wall assembly.1.1 This test method determines the drainage efficiency of EIFS clad wall assemblies when subjected to a water spray rate in accordance with Test Method E331. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.3 This standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：91.060.10 CCS：Q15;A29 发布：2003 实施：

简介： 信息：

简介： 信息：

ASTM F2273-2003 自行车叉的标准试验方法
简介：These tests are used to determine the performance of a bicycle fork.1.1 These test methods describe mechanical tests for determining the following performance properties:1.1.1 Compression Load,1.1.2 Bending Load,1.1.3 Impact Resistance, and1.1.4 Fatigue Life.1.2 The values stated in SI units are to be regarded as standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：43.150 (Cycles) CCS：Y14 发布：2003 实施：

简介： 信息：

简介： 信息：