金属涂覆标准检测标准金属涂覆标准-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

金属涂覆标准相关标准参考信息

ASTM A1073/A1073M-21 使用手动千分尺测量未涂覆钢板和非金属和金属涂层钢板厚度的标准做法
简介：
信息：ICS：25.220.40 CCS：发布：2021-05-01 实施：

ASTM B500/B500M-2010 高架电导体用金属涂覆钢绞线芯的标准规格
简介：1.1 This specification covers 7-wire, 19-wire, 37-wire, and 61-wire zinc-coated (galvanized), zinc-5 % aluminum-mischmetal alloy-coated stranded steel core intended for use in overhead electrical conductors. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
信息：ICS：77.140.65 CCS：K11 发布：2010 实施：

ASTM A1004/A1004M-1999 确定用于冷成形的框架构件的金属，被涂覆的金属，和非金属涂覆钢板材的最小预期腐蚀特性的标准惯例
简介：1.1 This practice covers procedures for establishing the acceptability of metallic-coated steel sheet, painted metallic-coated steel sheet and painted nonmetallic-coated steel sheet for use as cold formed framing members.1.2 This practice shall be used to assess the corrosion resistance of different coatings on steel sheet in a laboratory test. It shall not be used as an application performance standard for the cold formed framing members.1.3 The practice shall be used to evaluate coatings under consideration for addition to Specification A 1003/A 1003M.1.4 The values stated in either inch-pound or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other.1.5 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of the standard.
信息：ICS：77.140.50 (Flat steel products and semi-products) CCS：Q73;A29 发布：1999 实施：

ASTM A1073/A1073M-17 使用手动千分尺测量未涂覆钢板和非金属和金属涂层钢板厚度的标准做法
简介：
信息：ICS：25.220.40 CCS：发布：2017-05-01 实施：

FORD S-M99D4548-A-2007 前面涂覆金属的汽车内部用塑料***与标准FORD WSS-M99P1111-A一起使用***
简介：
信息：ICS： CCS：发布：2007-05-18 实施：

ASTM A974-1997(2016) 焊接钢丝网笼和网垫 (金属涂覆或者聚氯乙烯 (PVC) 涂覆) 的标准规格
简介：1.1x00a0;This specification covers gabions and gabion mattresses produced from metallic-coated welded wire fabric, and metallic-coated wire for spiral binders, lacing wire, and stiffeners used to assemble the product. The metallic-coated fabric may be polyvinyl chloride (PVC) coated after fabrication. The spiral binders, lacing wire, and stiffeners may be PVC coated after metallic coating. Polyvinyl chloride hereinafter will be designated as PVC. 1.2x00a0;Welded wire fabric for gabions and gabion mattresses is produced in five styles, based on the kind of coating, as described in Section 4. 1.3x00a0;The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.4x00a0;This specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this specification. 1.5x00a0;The following safety hazards caveat pertains only to the test methods portion, Section 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：77.140.65 CCS：发布：1997 实施：

ASTM A902-2017a 金属涂覆钢产品相关标准术语
简介：1.1x00a0;This standard is a compilation of terminology related to metallic coatings used in the steel industry, and to the steel on which the coatings are applied. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2x00a0;When a term is used in an ASTM document for which Committee A05 is responsible it is included herein only when judged, after review by Subcommittee A05.18, to be a generally usable term. 1.3x00a0;Definitions that are identical to those published by other ASTM committees or other standards organizations are identified with the ASTM standard designation (for example, Terminology B374) or with the abbreviation of the name of the organization. 1.4x00a0;A definition is a single sentence with additional information included in notes. The year the definition was adopted, or the year of latest revision, is appended. The responsible subcommittee reviews the definition for each term at five-year intervals, and prepares revisions as needed. 1.5x00a0;This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
信息：ICS：01.040.77 (Metallurgy ; 77.140.01 CCS：H04 发布：2017 实施：

FORD SK-M99D9706-A-2007 汽车外部用塑料涂覆的金属***与标准FORD WSSS-M99P1111-A一起使用***
简介：
信息：ICS： CCS：发布：2007-01-31 实施：

ASTM A926-1997 波纹金属管用涂覆材料抗磨性比较的标准试验方法
简介：1.1 This test method covers a procedure for comparing materials used for coating, paving and lining corrugated metal pipe by use of a bed load abrasion testing machine. The procedure attempts to simulate the effect of stone, gravel and sand carried by a stream through corrugated metal pipe. 1.2 The values stated in inch-pound units are to be regarded as standard. The SI units given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：19.060 (Mechanical testing); 25.220.01 (Surface tr CCS：A29 发布：1997 实施：

ASTM A929/A929M-2017 用于波纹钢管的热浸镀工艺的金属涂覆钢板的标准规格
简介：1.1x00a0;This specification covers steel sheet used in the manufacture of corrugated steel pipe for storm sewers, culverts, drains, and similar uses. The sheet is metallic coated by the hot-dip process. Material for this use is furnished in coils, flat in cut lengths, and corrugated in cut lengths. Many metallic coated materials are covered in this material specification. Users must determine which product best serves their needs. Five different metallic coatings are included: 1.1.1x00a0;Zinc-coated (galvanized), 1.1.2x00a0;Zinc-58201;% aluminum-Mischmetal (Zn-5Al-MM) alloy coated, 1.1.3x00a0;558201;% aluminum-zinc (55Al-Zn) alloy coated, 1.1.4x00a0;Aluminum-coated Type 2 (aluminized Type 2), and 1.1.5x00a0;Aluminum-coated Type 1 (aluminized Type 1). 1.2x00a0;Zinc-coated sheet is available in two coating weights [masses]. Other metallic coatings are available in one coating weight [mass] only. 1.3x00a0;The values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.
信息：ICS：77.140.50 CCS：H46 发布：2017 实施：

FORD WSK-M98D23-A-2006 装饰性聚氯乙烯（PVC）/金属涂覆的聚酯薄膜/聚氯乙烯（PVC）层压板共挤压成型料***与标准FORD WSS-M99P1111-A一起使用***
简介：
信息：ICS： CCS：发布：2006-09-27 实施：

ASTM B678-1986(2017) 金属涂覆产品的软钎焊性标准试验方法
简介：4.1x00a0;In order that a sound solder joint be formed simply and quickly in a production operation, the molten solder must readily wet and spread over the surfaces of the products being joined. For this to happen, the surfaces must be clean or be soiled only with contaminants that are easily removed by an appropriate flux. It often is necessary that the flux be only strong enough to remove the normally occurring soils. A more aggressive flux may corrode the product and have other harmful effects. Nonactivated rosin in alcohol is the standard flux used in this test method; however, provision is made for the use of other fluxes. Since rosin is a mild flux, it provides better discrimination between acceptable and unacceptable solderability in marginal cases than do more active fluxes. 4.2x00a0;Metallic coatings are frequently used to provide solderable surfaces. But, an improperly produced coating may not yield the required solderability. There are many coating defects that cause poor solderability including porosity, codeposited impurities, incorrect thickness, and surface contamination. It may be difficult or impractical to test a coating directly for each of the undesirable conditions. In these instances solderability is tested. Products that pass the solderability test can be expected to solder satisfactorily in production. In the case of failure to pass the test, the test results will not reveal the cause of the inadequate solderability, though, with experience, an operator may be able to identify the cause. 4.3x00a0;This test method measures the ability of a coated product to be soldered with 60/40 tin/lead solder using a nonactivated rosin flux. This solder and this flux, or an activated form of it, are generally used in the assembly of electronic products. 4.4x00a0;It is intended that the tested specimens be components of electronic products or articles with the same general shape and mass. Articles that are much more massive than this will heat up too slowly during the solder immersion. If more massive specimens are to be tested, a longer immersion time will have to be used, the time to be determined by experiment. 4.5x00a0;If the specimen tested is longer than 25 mm, its bottom end will be in the solder for significantly longer than the specified time. Therefore, if the specimen is longer than 25 mm, the results obtained at the bottom end of the specimen are invalid. This part of the specimen shall be discounted in the evaluation of the results. A second set of tests can be run on additional specimens in which the specimens are only partly immersed. These would be used to evaluate the bottom ends. 1.1x00a0;This test method provides a procedure for evaluating the solderability of metallic-coated products and test specimens to assure satisfactory performance in manufacturing processes requiring soldering with soft (tin-lead) solder and rosin flux. This test method is applicable only for testing coatings that are normally readily solderable such as: tin, tin-lead alloy, silver, and gold. 1.2x00a0;This test method is qualitative and broadly applicable. It is easy to perform and requires only simple equipment. There are other solderability tests not covered by this test method that are more applicable to specific situations, yield quantitative results, or bo......
信息：ICS：25.160.50 CCS：J33 发布：1986 实施：

ASTM A1073/A1073M-16 使用手动千分尺测量未涂覆钢板和非金属和金属涂层钢板厚度的标准做法
简介：
信息：ICS：25.220.40 CCS：发布：2016-05-01 实施：

ASTM A902-2006a 金属涂覆钢产品的相关标准术语
简介：1.1 This standard is a compilation of terminology related to metallic coatings used in the steel industry, and to the steel on which the coatings are applied. Terms that are generally understood or adequately defined in other readily available sources are not included.1.2 When a term is used in an ASTM document for which Committee A05 is responsible it is included herein only when judged, after review by Subcommittee A05.18, to be a generally usable term.1.3 Definitions that are identical to those published by other ASTM committees or other standards organizations are identified with the ASTM standard designation (for example, Terminology B 374) or with the abbreviation of the name of the organization.1.4 A definition is a single sentence with additional information included in notes. The year the definition was adopted, or the year of latest revision, is appended. The responsible subcommittee reviews the definition for each term at five-year intervals, and prepares revisions as needed.
信息：ICS：01.040.77 (Metallurgy (Vocabularies)); 77.140.01 ( CCS：A29 发布：2006 实施：

简介： 信息：

ASTM D5894-2016 涂覆金属循环烟雾/紫外线曝光的标准实施规程 (在雾/干柜和紫外线/凝结柜中交替曝光)
简介：5.1x00a0;The outdoor corrosion of painted metals is influenced by many factors, including: corrosive atmospheres, rain, condensed dew, UV light, wet/dry cycling, and temperature cycling. These factors frequently have a synergistic effect on one another. This practice is intended to provide a more realistic simulation of the interaction of these factors than is found in traditional tests with continuous exposure to a static set of corrosive conditions. 5.2x00a0;Results obtained from this practice can be used to compare the relative durability of materials subjected to the specific test cycle used. 5.3x00a0;No single exposure test can be specified as a complete simulation of actual use conditions in outdoor environments. Results obtained from exposures conducted according to this practice can be considered as representative of actual outdoor exposures only when the degree of rank correlation has been established for the specific materials being tested. The relative durability of materials in actual outdoor service can be very different in different locations because of differences in UV radiation, time of wetness, temperature, pollutants, and other factors. Therefore, even if results from a specific artificial test condition are found to be useful for comparing the relative durability of materials exposed in a particular exterior environment, it cannot be assumed that they will be useful for determining relative durability for a different environment. 5.4x00a0;Even though it is very tempting, it is not recommended to calculate an x201c;acceleration factorx201d; relating x hours of laboratory exposure to y months of exterior exposure. Different materials and different formulations of the same material can have significantly different acceleration factors. The acceleration factor also varies depending on the variability in rate of degradation in the laboratory test and in actual outdoor exposure. 5.5x00a0;This practice is best used to compare the relative performance of materials tested at the same time in the same exposure device. Because of possible variability between the same type of exposure devices, it is not recommended to compare the amount of degradation in materials exposed for the same duration at separate times, or in separate devices running the same test condition. This practice should not be used to establish a x201c;pass/failx201d; approval of materials after a specific period of exposure unless performance comparisons are made relative to a control material exposed simultaneously, or the variability in the test is rigorously quantified so that statistically significant pass/fail judgments can be made. 5.6x00a0;This practice has been found useful for air-dry industrial maintenance paints on steel3,4,5,6,7 and zinc-rich primers but its applicability ......
信息：ICS：25.220.01 CCS：发布：2016 实施：

ASTM A902-2006 金属涂覆钢产品的相关标准术语
简介：1.1 This standard is a compilation of terminology related to metallic coatings used in the steel industry, and to the steel on which the coatings are applied. Terms that are generally understood or adequately defined in other readily available sources are not included.1.2 When a term is used in an ASTM document for which Committee A05 is responsible it is included herein only when judged, after review by Subcommittee A05.18, to be a generally usable term.1.3 Definitions that are identical to those published by other ASTM committees or other standards organizations are identified with the ASTM standard designation (for example, Terminology B 374) or with the abbreviation of the name of the organization.1.4 A definition is a single sentence with additional information included in notes. The year the definition was adopted, or the year of latest revision, is appended. The responsible subcommittee reviews the definition for each term at five-year intervals, and prepares revisions as needed.
信息：ICS：01.040.77 (Metallurgy (Vocabularies)); 77.140.01 ( CCS：A29 发布：2006 实施：

简介： 信息：

ASTM A755/A755M-2016e1 对外露建筑产品采用热浸工艺涂覆且采用卷材涂装工艺进行预涂的金属钢板的标准规格
简介：1.1x00a0;This specification covers steel sheet metallic coated by the hot-dip process and coil-coated with organic films for exterior exposed building products. Sheet of this designation is furnished in coils, cut lengths, and formed cut lengths. Building products include corrugated and various types of roll and brake-formed configurations. 1.2x00a0;The substrate is available in several different metallic-coated steel sheet products as enumerated in 4.1, depending on the requirements of the purchaser. 1.3x00a0;Coating systems supplied under this specification consist of a primer coat covered by various types and thicknesses of top coats. The combination of primer and top coat is classed as either a two-coat thin-film system or as a two-coat (or more) thick-film system. Typical top-coating materials are: polyester, silicone polyester, acrylic, fluoropolymer, plastisol, or polyurethane. 1.4x00a0;This specification is applicable to orders in either inch-pound units (as A755) or SI units [as A755M]. Values in inch-pound units and SI units are not necessarily equivalent. Within the text, SI units are shown in brackets. Each system shall be used independently of each other. 1.5x00a0;Unless the order specifies the x201c;Mx201d; designation (SI units) the product shall be furnished to inch-pound units. 1.6x00a0;The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of this specification. 1.7x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：91.060.20 CCS：发布：2016 实施：

ASTM A902-2005 金属涂覆钢产品的相关标准术语
简介：1.1 This standard is a compilation of terminology related to metallic coatings used in the steel industry, and to the steel on which the coatings are applied. Terms that are generally understood or adequately defined in other readily available sources are not included.1.2 When a term is used in an ASTM document for which Committee A05 is responsible it is included herein only when judged, after review by Subcommittee A05.18, to be a generally usable term.1.3 Definitions that are identical to those published by other ASTM committees or other standards organizations are identified with the ASTM standard designation (for example, Terminology B 374) or with the abbreviation of the name of the organization.1.4 A definition is a single sentence with additional information included in notes. The year the definition was adopted, or the year of latest revision, is appended. The responsible subcommittee reviews the definition for each term at five-year intervals, and prepares revisions as needed.
信息：ICS：01.040.77 (Metallurgy (Vocabularies)); 77.140.01 ( CCS：H40 发布：2005 实施：

简介： 信息：

ASTM A755/A755M-2016 对外露建筑产品采用热浸工艺涂覆且采用卷材涂装工艺进行预涂的金属钢板的标准规格
简介：1.1x00a0;This specification covers steel sheet metallic coated by the hot-dip process and coil-coated with organic films for exterior exposed building products. Sheet of this designation is furnished in coils, cut lengths, and formed cut lengths. Building products include corrugated and various types of roll and brake-formed configurations. 1.2x00a0;The substrate is available in several different metallic-coated steel sheet products as enumerated in 4.1, depending on the requirements of the purchaser. 1.3x00a0;Coating systems supplied under this specification consist of a primer coat covered by various types and thicknesses of top coats. The combination of primer and top coat is classed as either a two-coat thin-film system or as a two-coat (or more) thick-film system. Typical top-coating materials are: polyester, silicone polyester, acrylic, fluoropolymer, plastisol, or polyurethane. 1.4x00a0;This specification is applicable to orders in either inch-pound units (as A755) or SI units [as A755M]. Values in inch-pound units and SI units are not necessarily equivalent. Within the text, SI units are shown in brackets. Each system shall be used independently of each other. 1.5x00a0;Unless the order specifies the x201c;Mx201d; designation (SI units) the product shall be furnished to inch-pound units. 1.6x00a0;The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of this specification. 1.7x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：91.060.20 CCS：发布：2016 实施：

ASTM A902-2005a 金属涂覆钢产品的相关标准术语
简介：1.1 This standard is a compilation of terminology related to metallic coatings used in the steel industry, and to the steel on which the coatings are applied. Terms that are generally understood or adequately defined in other readily available sources are not included.1.2 When a term is used in an ASTM document for which Committee A05 is responsible it is included herein only when judged, after review by Subcommittee A05.18, to be a generally usable term.1.3 Definitions that are identical to those published by other ASTM committees or other standards organizations are identified with the ASTM standard designation (for example, Terminology B 374) or with the abbreviation of the name of the organization.1.4 A definition is a single sentence with additional information included in notes. The year the definition was adopted, or the year of latest revision, is appended. The responsible subcommittee reviews the definition for each term at five-year intervals, and prepares revisions as needed.
信息：ICS：01.040.77 (Metallurgy (Vocabularies)); 77.140.01 ( CCS：H40 发布：2005 实施：

简介： 信息：

ASTM A902-2015 金属涂覆钢产品的相关标准术语
简介：1.1x00a0;This standard is a compilation of terminology related to metallic coatings used in the steel industry, and to the steel on which the coatings are applied. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2x00a0;When a term is used in an ASTM document for which Committee A05 is responsible it is included herein only when judged, after review by Subcommittee A05.18, to be a generally usable term. 1.3x00a0;Definitions that are identical to those published by other ASTM committees or other standards organizations are identified with the ASTM standard designation (for example, Terminology B374) or with the abbreviation of the name of the organization. 1.4x00a0;A definition is a single sentence with additional information included in notes. The year the definition was adopted, or the year of latest revision, is appended. The responsible subcommittee reviews the definition for each term at five-year intervals, and prepares revisions as needed.
信息：ICS：01.040.77;77.140.01 CCS：发布：2015 实施：

UL 514B BULLETINS-2004 STP 4装甲的和金属涂覆电缆用标准技术小组.STP 514B电缆和导线用配件的标准技术小组.UL 1569金属涂覆电缆用订户的UL标准服务第3版.UL 514B电缆和导线用配件第4版
简介：The following items are subject to comment: 1.) Proposed changes to Clause 5.2.1.2 to clarify flammability rating requirements for Mexico. 2.) Proposed changes to Clauses 7.3.1, 7.12.3, 7.16.1, and Table 19 to provide alternative marking requirements for Mexico to establish a standardized means of identifying fittings in the U.S., Canada, and Mexico. 3.) Proposed editorial changes to Clauses 2.2, 5.7.1.11, 5.8.1.1, 5.8.1.2, 7.3, 8.4.2, 8.12, 8.30.2.1, 8.36.3, and 8.36.4.This bulletin presents the disposition of the comments received during ANSI canvass ofrevisions of the American National Standard for Metal-Clad Cables, ANSI/UL 1569. The revisionswere proposed in UL’s Subject 1569 bulletin dated April 16, 2004 and are substantially changedin this bulletin. The disposition is by the STP member who submitted the April 16 proposal.UL agrees with the disposition shown.These revisions are being issued to modify the Fault-Current Test method, add a new markingrequirement, make editorial corrections, and change one of the termination methods.COMMENTS DUE: January 21,2005.
信息：ICS：29.120.20 CCS：K13 发布：2004-01-01 实施：

简介： 信息：

DIN EN 13523-14-2014 涂覆金属卷材.试验方法.第14部分:粉化(Helmen法);EN 13523-14:2014的德文标准
简介：
信息：ICS：25.220.60 CCS：H10 发布：2014-08-01 实施：

FORD ESB-M5P4-A-2003 第二面涂覆金属的塑料部件***与标准FORD WSS-M99P1111-A一起使用***
简介：
信息：ICS： CCS：发布：2003-08-28 实施：

简介： 信息：

ASTM A902-2014 关于金属涂覆钢产品的标准术语
简介：1.1x00a0;This standard is a compilation of terminology related to metallic coatings used in the steel industry, and to the steel on which the coatings are applied. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2x00a0;When a term is used in an ASTM document for which Committee A05 is responsible it is included herein only when judged, after review by Subcommittee A05.18, to be a generally usable term. 1.3x00a0;Definitions that are identical to those published by other ASTM committees or other standards organizations are identified with the ASTM standard designation (for example, Terminology B374) or with the abbreviation of the name of the organization. 1.4x00a0;A definition is a single sentence with additional information included in notes. The year the definition was adopted, or the year of latest revision, is appended. The responsible subcommittee reviews the definition for each term at five-year intervals, and prepares revisions as needed.
信息：ICS：01.040.77 (Metallurgy (Vocabularies)); 77.140.01 ( CCS：发布：2014 实施：

FORD ESB-M1G110-B-2003 乙烯塑料覆盖的金属涂覆的聚酯薄膜式乙烯基模制层压板***与标准FORD WSS-M99P1111-A一起使用***列于标准ESB-M1G110-A上
简介：
信息：ICS： CCS：发布：2003-01-24 实施：

简介： 信息：

ASTM A742/A742M-2013 波纹钢管用预涂聚合物和金属涂覆钢薄板的标准规格
简介：1.1x00a0;This specification covers polymer precoated steel sheet for corrugated steel pipe (CSP) which is coated after metallic coating on continuous lines by coil coating (roller coating or laminating) processes. The metallic coating is either zinc, 558201;% aluminum-zinc alloy, or zinc-58201;% aluminum-mischmetal alloy. Sheet for this purpose is furnished flat in coils, flat in cut lengths, or corrugated in cut lengths, all being protected by a mill-applied polymer coating on both sides. 1.2x00a0;The values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not equivalents; therefore, each system must be used independently of the other. 1.3x00a0;The following precautionary caveat refers only to the test method portion, Section 9, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：77.140.50 (Flat steel products and semi-products) CCS：H46 发布：2013 实施：

ASTM A902-2003 金属涂覆钢产品的相关标准术语
简介：1.1 This standard is a compilation of terminology related to metallic coatings used in the steel industry, and to the steel on which the coatings are applied. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 When a term is used in an ASTM document for which Committee A05 is responsible it is included herein only when judged, after review by Subcommittee A05.18, to be a generally usable term. 1.3 Definitions that are identical to those published by other ASTM committees or other standards organizations are identified with the ASTM standard designation (for example, Terminology B374) or with the abbreviation of the name of the organization. 1.4 A definition is a single sentence with additional information included in notes. The year the definition was adopted or the year of latest revision or review, is appended. The responsible subcommittee reviews the definition for each tern at five-year intervals, and prepares revisions as needed.
信息：ICS：01.040.77 (Metallurgy (Vocabularies)); 77.140.01 ( CCS：H40 发布：2003 实施：

简介： 信息：

ASTM A902-2013 金属涂覆钢产品的相关标准术语
简介：1.1x00a0;This standard is a compilation of terminology related to metallic coatings used in the steel industry, and to the steel on which the coatings are applied. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2x00a0;When a term is used in an ASTM document for which Committee A05 is responsible it is included herein only when judged, after review by Subcommittee A05.18, to be a generally usable term. 1.3x00a0;Definitions that are identical to those published by other ASTM committees or other standards organizations are identified with the ASTM standard designation (for example, Terminology B374) or with the abbreviation of the name of the organization. 1.4x00a0;A definition is a single sentence with additional information included in notes. The year the definition was adopted, or the year of latest revision, is appended. The responsible subcommittee reviews the definition for each term at five-year intervals, and prepares revisions as needed.
信息：ICS：01.040.77 (Metallurgy (Vocabularies)); 77.140.01 ( CCS：H40 发布：2013 实施：

ASTM A902-2002 金属涂覆钢产品的相关标准术语
简介：1.1 This standard is a compilation of terminology related to metallic coatings used in the steel industry, and to the steel on which the coatings are applied. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 When a term is used in an ASTM document for which Committee A05 is responsible it is included herein only when judged, after review by Subcommittee A05.18, to be a generally usable term. 1.3 Definitions that are identical to those published by other ASTM committees or other standards organizations are identified with the ASTM standard designation (for example, Terminology B374) or with the abbreviation of the name of the organization. 1.4 A definition is a single sentence with additional information included in notes. The year the definition was adopted or the year of latest revision or review, is appended. The responsible subcommittee reviews the definition for each tern at five-year intervals, and prepares revisions as needed.
信息：ICS：01.040.77 (Metallurgy (Vocabularies)); 77.140.01 ( CCS：H40 发布：2002 实施：

简介： 信息：

ASTM A902-2013a 金属涂覆钢产品的相关标准术语
简介：1.1x00a0;This standard is a compilation of terminology related to metallic coatings used in the steel industry, and to the steel on which the coatings are applied. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2x00a0;When a term is used in an ASTM document for which Committee A05 is responsible it is included herein only when judged, after review by Subcommittee A05.18, to be a generally usable term. 1.3x00a0;Definitions that are identical to those published by other ASTM committees or other standards organizations are identified with the ASTM standard designation (for example, Terminology B374) or with the abbreviation of the name of the organization. 1.4x00a0;A definition is a single sentence with additional information included in notes. The year the definition was adopted, or the year of latest revision, is appended. The responsible subcommittee reviews the definition for each term at five-year intervals, and prepares revisions as needed.
信息：ICS：01.040.77 (Metallurgy (Vocabularies)); 77.140.01 ( CCS：H04 发布：2013 实施：

ASTM A902-2001 金属涂覆钢产品的相关标准术语
简介：1.1 This standard is a compilation of terminology related to metallic coatings used in the steel industry, and to the steel on which the coatings are applied. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 When a term is used in an ASTM document for which Committee A05 is responsible it is included herein only when judged, after review by Subcommittee A05.18, to be a generally usable term. 1.3 Definitions that are identical to those published by other ASTM committees or other standards organizations are identified with the ASTM standard designation (for example, Terminology B374) or with the abbreviation of the name of the organization. 1.4 A definition is a single sentence with additional information included in notes. The year the definition was adopted or the year of latest revision or review, is appended. The responsible subcommittee reviews the definition for each tern at five-year intervals, and prepares revisions as needed.
信息：ICS：01.040.77 (Metallurgy (Vocabularies)); 77.140.01 ( CCS：H40 发布：2001 实施：

简介： 信息：

ASTM B500/B500M-2012 高架电导体用金属涂覆钢绞线芯标准规格
简介：1.1 This specification covers 7-wire, 19-wire, 37-wire, and 61-wire zinc-coated (galvanized), zinc-5 % aluminum-mischmetal alloy-coated or aluminum clad stranded steel core intended for use in overhead electrical conductors. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
信息：ICS：77.140.65 (Steel wire, wir ropes and link chains) CCS：K11 发布：2012 实施：

ASTM A929/A929M-2001(2013) 波纹钢管用经热浸处理的金属涂覆薄钢板标准规格
简介：1.1x00a0;This specification covers steel sheet used in the manufacture of corrugated steel pipe for storm sewers, culverts, drains, and similar uses. The sheet is metallic coated by the hot-dip process. Material for this use is furnished in coils, flat in cut lengths, and corrugated in cut lengths. Many metallic coated materials are covered in this material specification. Users must determine which product best serves their needs. Five different metallic coatings are included: 1.1.1x00a0;Zinc-coated (galvanized), 1.1.2x00a0;Zinc-58201;% aluminum-Mischmetal (Zn-5Al-MM) alloy coated, 1.1.3x00a0;558201;% aluminum-zinc (55Al-Zn) alloy coated, 1.1.4x00a0;Aluminum-coated Type 2 (aluminized Type 2), and 1.1.5x00a0;Aluminum-coated Type 1 (aluminized Type 1). 1.2x00a0;Zinc-coated sheet is available in two coating weights [masses]. Other metallic coatings are available in one coating weight [mass] only. 1.3x00a0;The values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.
信息：ICS：77.140.50 (Flat steel products and semi-products) CCS：H46 发布：2001 实施：

简介： 信息：

ASTM F2919/F2919M-2012 可变网孔模式或网片中网孔大于6英寸² [3871 mm²] 的电焊网栏织物（金属涂覆或聚合物涂覆）的标准规格
简介：1.1 This specification covers welded wire mesh fence fabric produced from steel wire or metallic-coated steel wire. The metallic-coated fabric may be polymer coated after fabrication. 1.2 Welded wire mesh fence fabric is produced in four types, based on the kind of coating, as described in Section 4. 1.3 This specification is applicable to orders in either inch-pound units or SI units. Values stated in either inch-pound or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values in the two systems are not exact equivalents; therefore, each system shall be used independent of the other, without combining values in any way. 1.4 This specification references notes and footnotes, which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this specification. 1.5 The following safety hazards caveat pertains only to the test methods portion, 13.4, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：77.140.65 (Steel wire, wir ropes and link chains) CCS：W59 发布：2012 实施：

ASTM A824-2001(2012) 链环栅栏用波浪形拉力金属涂覆钢丝标准规格
简介：1.1 This specification covers 0.177 in. (4.50 mm) diameter metallic-coated carbon steel marcelled tension wire for use with chain-link fence. The 0.177 in. (4.50 mm) diameter metallic-coated wire shall be produced in accordance with Specification A817. Three types of coatings are covered: 1.1.1 Type I???Aluminum-coated (aluminized), 1.1.2 Type II???Zinc-coated (galvanized), and 1.1.3 8199;Type III???Zinc-58201;% Aluminum Mischmetal (Zn5Al-MM) alloy-coated. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
信息：ICS：77.140.65 (Steel wire, wir ropes and link chains) CCS：H49 发布：2001 实施：

简介： 信息：

ASTM A116-2011 金属涂覆钢丝编织栅栏网的标准规格
简介：1.1 This specification covers metallic-coated steel fence fabric having a series of horizontal (line) wires, with vertical (stay) wires either wrapped around the line wire (hinge joint) or fixed with another separate wire to the line wire (continuous stay fixed knot joint), forming rectangular openings. The fence fabric is suitable for use in fences for farm field enclosure (to keep domestic animals in or out), for wildlife and exotic animal control, for highway or railroad right-of-way fencing (to control access), and other similar uses. 1.2 This specification covers fence fabric in various designs, tensile strength grades, and metallic coating types and grades. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.
信息：ICS：77.140.65 CCS：H49 发布：2011 实施：

AASHTO M 36-2001 下水道和排水沟用金属涂覆波纹钢管标准规范HM-22;IA部分;ASTM标准编号:A 760/A 760M-97
简介：
信息：ICS： CCS：发布：2001 实施：

简介： 信息：

ASTM A975-2011(2016) 双绞合六边形网笼和护堤垫的标准规格 (金属涂覆钢丝或者带有聚氯乙烯 (PVC) 涂层的金属涂覆钢丝)
简介：1.1x00a0;This specification covers gabions and revet mattresses produced from double-twisted metallic-coated wire mesh, and metallic-coated wire for lacing wire, stiffeners, and fasteners used for manufacturing, assembling, and installation of the product. This specification also covers gabions and revet mattresses in which the wire mesh, lacing wire, and stiffeners are poly(vinyl chloride) (PVC) coated after the metallic coating. 1.2x00a0;Double-twisted wire mesh for gabions and revet mattresses is produced in different styles, based on type of coating, as described in Section 4. 1.3x00a0;The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4x00a0;This specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this specification. 1.5x00a0;The following safety hazards caveat pertains only to the test methods portion, Section 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：25.220.60 CCS：发布：2011 实施：

AASHTO M246-2000 波纹钢管用预涂聚合物和金属涂覆钢薄板的标准规范.第20版;ASTM标准编号 A742/A742M-98
简介：
信息：ICS： CCS：发布：2000 实施：

简介： 信息：

FORD WSS-M4D1014-A-2010 直接可涂覆金属级聚对苯二甲酸丁二醇酯（PBT）成型料***与标准FORD WSS-M99P1111-A一起使用***
简介：
信息：ICS： CCS：发布：2010-06-11 实施：

ASTM G33-1999(2015) 金属涂覆钢试样的大气腐蚀试验数据记录的标准实施规程
简介：3.1x00a0;Use of this practice will maximize the benefits to be gained from atmospheric testing of metallic-coated steel. It will also aid in comparing results from one location to another where similar tests have been conducted. 1.1x00a0;This practice covers a procedure for recording data of atmospheric corrosion tests of metallic-coated steel specimens. Its objective is the assurance of (1) complete identification of materials before testing, (2) objective reporting of material appearance during visual inspections, and (3) adequate photographic, micrographic, and chemical laboratory examinations at specific stages of deterioration, and at the end of the tests. 1.2x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：77.060 CCS：发布：1999 实施：

简介： 信息：

FORD SK-M99D9706-A-2010 汽车外部用塑料涂覆金属***与标准FORD WSS-M99P1111-A一起使用***
简介：
信息：ICS： CCS：发布：2010-02-24 实施：

ASTM A902-1999 金属涂覆钢产品的相关标准术语
简介：1.1 This standard is a compilation of terminology related to metallic coatings used in the steel industry, and to the steel on which the coatings are applied. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 When a term is used in an ASTM document for which Committee A05 is responsible it is included herein only when judged, after review by Subcommittee A05.18, to be a generally usable term. 1.3 Definitions that are identical to those published by other ASTM committees or other standards organizations are identified with the ASTM standard designation (for example, Terminology B374) or with the abbreviation of the name of the organization. 1.4 A definition is a single sentence with additional information included in notes. The year the definition was adopted or the year of latest revision or review, is appended. The responsible subcommittee reviews the definition for each tern at five-year intervals, and prepares revisions as needed.
信息：ICS：01.040.77 (Metallurgy (Vocabularies)); 77.140.01 ( CCS：H40 发布：1999 实施：

简介： 信息：