硝酸钍溶液检测标准硝酸钍溶液-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

硝酸钍溶液相关标准参考信息

ASTM C788-03(2021) 核级硝酸铀酰溶液或晶体的标准规范
简介：
信息：ICS：27.120.30 CCS：发布：2021-10-01 实施：

BS ISO 15366-1-2014 核燃料技术. 采用溶剂萃取色谱法对同位素和同位素稀释分析用的硝酸溶液进行铀和钚的化学分离和纯化. 微克范围内含钚的样品和毫克范围内含铀的样品
简介：
信息：ICS：27.120.30 CCS：F46 发布：2014-06-30 实施：2014-06-30

ASTM C799-12 核级硝酸铀溶液的化学质谱光谱核和放射化学分析的标准测试方法
简介：
信息：ICS：27.120.30 CCS：发布：2012-01-01 实施：

DIN EN ISO 9463-2021 核能. 核燃料技术. 通过分光光度法测定硝酸溶液中的钚(ISO 9463-2019); 德文版本EN ISO 9463-2021
简介：This document specifies an analytical method by spectrophotometry, for determining the plutonium concentration in nitric acid solutions, with spectrophotometer implemented in hot cell and glove box allowing the analysis of high activity solutions. Commonly, the method is applicab
信息：ICS：27.120.30 CCS：F46 发布：2021-04-00 实施：

ISO 15366-2:2014 核燃料技术 - 通过溶剂萃取色谱法对硝酸溶液中的铀和钚进行同位素和同位素稀释分析的化学分离和纯化 - 第2部分:纳米级和以下的钚和铀样品
简介：
信息：ICS：27.120.30 CCS：发布：2014-06-17 实施：

ASTM C799-2012 核纯级硝酸铀酰溶液的化学,质谱,光谱化学,核(放射性)及放射化学分析标准试验方法
简介：Uranyl nitrate solution is used as a feed material for conversion to the hexafluoride as well as for direct conversion to the oxide. In order to be suitable for this purpose, the material must meet certain criteria for uranium content, isotopic composition, acidity, radioactivity, and impurity content. These methods are designed to show whether a given material meets the specifications for these items described in Specification C788. An assay is performed to determine whether the material has the specified uranium content. Determination of the isotopic content of the uranium is made to establish whether the effective fissile content is in accordance with the purchaserx2019;s specifications. Acidity, organic content, and alpha, beta, and gamma activity are measured to establish that they do not exceed their maximum limits. Impurity content is determined to ensure that the maximum concentration limit of certain impurity elements is not exceeded. Impurity concentrations are also required for calculation of the equivalent boron content (EBC), and the total equivalent boron content (TEBC).1.1 These test methods cover procedures for the chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of nuclear-grade uranyl nitrate solution to determine compliance with specifications. 1.2 The analytical procedures appear in the following order: Sections Determination of Uranium 7 Specific Gravity by Pycnometry 15-20 Free Acid by Oxalate Complexation 21-27 Determination of Thorium28 Determination of Chromium29 Determination of Molybdenum30 Halogens Separation by Steam Distillation 31-35 Fluoride by Specific Ion Electrode 36-42 Halogen Distillate Analysis: Chloride, Bromide, and Iodide by Amperometric Microtitrimetry43 Determination of Chloride and Bromide44 Determination of Sulfur by X-Ray Fluorescence45 Sulfate Sulfur by (Photometric) Turbidimetry46 Phosphorus by the Molybdenum Blue (Photometric) Method 54-61 Silicon by the Molybdenum Blue (Photometric) Method62-69 Carbon by Persulfate Oxidation-Acid Titrimetry70 Conversion to U3O871-74 Boron by Emission Spectrography75-81 Impurity Elements by Spark Source Mass Spectrography
信息：ICS：27.120.30 (Fissile materials and nuclear fuel tech CCS：F46 发布：2012 实施：

DIN EN ISO 8299-2021 核燃料技术. 用热电离质谱法测定硝酸溶液中核材料的同位素, 元素铀和钚的浓度(ISO 8299-2019); 英文版本EN ISO 8299-2021
简介：This document specifies a method for the determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry.The method applies to uranium and plutonium isotope composition and conc
信息：ICS：27.120.30 CCS：F46 发布：2021-04-00 实施：

ISO 15366-1:2014 核燃料技术 - 通过溶剂萃取色谱法对硝酸溶液中的铀和钚进行同位素和同位素稀释分析的化学分离和纯化 - 第1部分:在毫微米范围内的微量范围和铀中含有钚的样品
简介：
信息：ICS：27.120.30 CCS：发布：2014-06-17 实施：

HB 20056.2-2011 锡-铋合金镀层及电镀锡-铋合金溶液分析方法.第2部分: 分光光度法测定硝酸铋含量
简介：本部分规定了采用分光光度法测定电镀锡-铋合金溶液中硝酸铋(Bi(N0) •5H0)含量的原理、试剂、仪器、分析步骤及分析结果的计算。本部分适用于电镀锡-铋合金溶液中硝酸铋(Bi(N0)•5H0)含量的测定。测量范围：0.4g/L～0.9g/L。
信息：ICS： CCS：H13 发布：2011-07-19 实施：2011-10-01

NF M60-406-2021 核能. 核燃料技术. 分光光度法测定硝酸溶液中钚元素的含量
简介：
信息：ICS：27.120.30 CCS：F46 发布：2021-02-10 实施：2021-08-28

ASTM C1295-14 六氟化铀和硝酸铀溶液中裂变和衰变产物的伽马能量辐射的标准测试方法
简介：
信息：ICS：27.120.30 CCS：发布：2014-06-15 实施：

ASTM C1413-05(2011) 热电离质谱法测定水解六氟化铀和硝酸铀酰溶液同位素分析的标准试验方法
简介：
信息：ICS：27.120.30 CCS：发布：2011-06-01 实施：

2183药典二部-2020 第一部分十二画硝酸益康唑溶液
简介：无
信息：ICS： CCS：发布：2020-06-24 实施：2020-12-30

NF M60-405-2014 核燃料技术. 纯硝酸钚溶液中钚含量的测定. 重量法
简介：La présente Norme internationale spécifie une méthode gravimétrique pour déterminer, dans des conditions de fidélité et d'exactitude, la concentration en plutonium dans des solutions de nitrate de plutonium pur et des solutions de référence, contenant entre 100 g et 300 g de plutonium par litre, en milieu acide nitrique.
信息：ICS：27.120.30 CCS：F46 发布：2014-02-15 实施：2014-02-15

ASTM C759-10 核级硝酸钚溶液的化学、质谱、光谱化学、核和放射化学分析的标准试验方法
简介：
信息：ICS：27.120.30 CCS：发布：2010-06-01 实施：

ASTM C1477-19 通过多集电极电感耦合等离子体质谱法对六氟化铀和硝酸铀溶液进行同位素丰度分析的标准测试方法
简介：
信息：ICS：27.120.30 CCS：发布：2019-11-01 实施：

ASTM C1477-08(2014) 通过多集电极电感耦合等离子体质谱法对六氟化铀和硝酸铀溶液进行同位素丰度分析的标准测试方法
简介：
信息：ICS：27.120.30 CCS：发布：2014-01-01 实施：

1717药典二部-2010 第一部分十二画硝酸益康唑溶液
简介：来自第956页
信息：ICS： CCS：发布：2010-01-01 实施：2010-01-01

ASTM C799-19 核级硝酸铀溶液的化学质谱光谱核和放射化学分析的标准测试方法
简介：
信息：ICS：27.120.30 CCS：发布：2019-07-01 实施：

ASTM C1295-2014 六氟化铀和硝酸铀酰溶液中裂变和衰变产物释放的伽马射线能量辐射的标准试验方法
简介：4.1x00a0;Specific gamma-ray emitting radionuclides in UF6 are identified and quantified using a high-resolution gamma-ray energy analysis system, which includes a high-resolution germanium detector. This test method shall be used to meet the health and safety specifications of C787, C788, and C996 regarding applicable fission products in reprocessed uranium solutions. This test method may also be used to provide information to parties such as conversion facilities on the level of uranium decay products in such materials. Pa-231 is a specific uranium decay product that may be present in uranium ore concentrate and is amenable to analysis by gamma spectrometry. 1.1x00a0;This test method covers the measurement of gamma energy emitted from fission and decay products in uranium hexafluoride (UF6) and uranyl nitrate solution. It is intended to provide a method for demonstrating compliance with UF6 specifications C787 and C996, uranyl nitrate specification C788, and uranium ore concentrate specification C967. 1.2x00a0;The lower limit of detection is 5000 MeV Bq/kg (MeV/kg per second) of uranium and is the square root of the sum of the squares of the individual reporting limits of the nuclides to be measured. The limit of detection was determined on a pure, aged natural uranium (ANU) solution. The value is dependent upon detector efficiency and background. 1.3x00a0;The fission product nuclides to be measured are 106Ru/ 106Rh,8201;103Ru, 137Cs, 144Ce, 144Pr, 141Ce, 95Zr, 95Nb, and 125Sb. Among the uranium decay product nuclides that may be measured is 231Pa. Other gamma energy-emitting fission and uranium decay nuclides present in the spectrum at detectable levels should be identified and quantified as required by the data quality objectives. 1.4x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：27.120.30 (Fissile materials and nuclear fuel tech CCS：发布：2014 实施：

ASTM C759-2010 核纯级硝酸钚溶液的化学、质谱和光谱化学分析的标准试验方法
简介：These test methods are designed to show whether a given material meets the purchaser's specifications. An assay is performed to determine whether the material has the specified plutonium content. Determination of the isotopic content of the plutonium in the plutonium-nitrate solution is made to establish whether the effective fissile content is in compliance with the purchaser's specifications. Impurity content is determined by a variety of methods to ensure that the maximum concentration limit of specified impurities is not exceeded. Determination of impurities is also required for calculation of the equivalent boron content (EBC).1.1 These test methods cover procedures for the chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of nuclear-grade plutonium nitrate solutions to determine compliance with specifications. 1.2 The analytical procedures appear in the following order:
信息：ICS：27.120.30 CCS：F46 发布：2010 实施：

ISO 9463-2019 核能 - 核燃料技术 - 分光光度法测定硝酸溶液中的钚
简介：
信息：ICS：27.120.30 CCS：发布：2019-01-30 实施：

BS ISO 8425-2013 核燃料技术.纯硝酸钚溶液中钚的测定.重量法
简介：
信息：ICS：27.120.30 CCS：F46 发布：2013-12-31 实施：2013-12-31

KS M 1043-2009(2019) 硝酸根离子标准溶液
简介：
信息：ICS：71.040.30 CCS：发布：2009-11-30 实施：

ISO 8299-2019 核燃料技术 - 通过热电离质谱法测定硝酸溶液中核材料的同位素和元素铀浓度和钚浓度
简介：
信息：ICS：27.120.30 CCS：发布：2019-01-30 实施：

BS ISO 8425-2013 核燃料技术.纯硝酸钚溶液中钚的测定.重量法
简介：
信息：ICS：27.120.30 CCS：F46 发布：2013-12-31 实施：2013-12-31

NF M60-406-2009 核能.核燃料技术.分光光度法测定硝酸溶液中钚元素的含量
简介：
信息：ICS：27.120.30 CCS：F46 发布：2009-11-01 实施：2009-11-14

ASTM C1413-18 热电离质谱法测定水解六氟化铀和硝酸铀酰溶液同位素分析的标准试验方法
简介：
信息：ICS：27.120.30 CCS：发布：2018-11-01 实施：

ISO 8425-2013 核燃料技术.纯硝酸钚溶液中钚的测定.重量法
简介：This International Standard specifies a precise and accurate gravimetric method for determining the concentration of plutonium in pure plutonium nitrate solutions and reference solutions, containing between 100 g and 300 g of plutonium per litre, in a nitric acid medium.
信息：ICS：27.120.30 CCS：F46 发布：2013-12 实施：

ISO 9463:2009 核能——核燃料技术——分光光度法测定硝酸溶液中的钚
简介：
信息：ICS：27.120.30 CCS：发布：2009-08-04 实施：

ASTM C759-18 核级硝酸钚溶液的化学、质谱、光谱化学、核和放射化学分析的标准试验方法
简介：
信息：ICS：27.120.30 CCS：发布：2018-09-01 实施：

ISO 8425:2013 核燃料技术——纯硝酸钚溶液中钚的测定——重量法
简介：
信息：ICS：27.120.30 CCS：发布：2013-11-25 实施：

NF M60-415-2009 核能.核燃料技术.分光光度测定法测定硝酸溶液中的镎
简介：
信息：ICS：27.120.30 CCS：F46 发布：2009-08-01 实施：2009-08-08

DIN EN ISO 15366-2-2016 核燃料技术.采用溶剂萃取色谱法对同位素和同位素稀释分析用的硝酸溶液进行铀和钚的化学分离和纯化.第2部分:纳克及以下范围内含钚和铀的样品(ISO 15366-2-2014).德文版本EN ISO 15366-2-2016
简介：
信息：ICS：27.120.30 CCS：F46 发布：2016-07 实施：

ASTM C1295-13 六氟化铀和硝酸铀溶液中裂变和衰变产物的伽马能量辐射的标准测试方法
简介：
信息：ICS：27.120.30 CCS：发布：2013-02-15 实施：

ISO 9463-2009 核能.核燃料技术.分光光度法测定硝酸溶液中的钚
简介：
信息：ICS：27.120.30 CCS：F46 发布：2009-08 实施：

DIN EN ISO 15366-1-2016 核燃料技术.采用溶剂萃取色谱法对同位素和同位素稀释分析用的硝酸溶液进行铀和钚的化学分离和纯化.第1部分:微克范围内含钚的样品和毫克范围内含铀的样品(ISO 15366-1-2014).德文版本EN ISO 15366-1-2016
简介：
信息：ICS：27.120.30 CCS：F46 发布：2016-07 实施：

KS A ISO 9892-2012(2022) 金属铀、二氧化铀粉末和颗粒以及硝酸铀酰溶液氟含量的测定氟离子选择电极法
简介：
信息：ICS：27.120.30 CCS：发布：2012-12-12 实施：

ASTM C788-03(2009) 核级硝酸铀溶液或晶体的标准规范
简介：
信息：ICS：27.120.30 CCS：发布：2009-06-01 实施：

2089药典二部-2015 第一部分十二画硝酸益康唑溶液
简介：无
信息：ICS： CCS：发布：2015-06-05 实施：2015-12-01

KS A ISO 7476-2012 核燃料技术.核级硝酸铀酰溶液中铀的测定.重量法
简介：이 표준은 1 kg당 100 g 이상의 우라늄을 포함한 핵등급 질산우라닐의 질량비를 결정하
信息：ICS：27.120.30 CCS：F46 发布：2012-12-12 实施：2012-12-12

ISO 13465:2009 核能——核燃料技术——分光光度法测定硝酸溶液中镎
简介：
信息：ICS：27.120.30 CCS：发布：2009-05-05 实施：

ASTM C788-03(2015) 核级硝酸铀溶液或晶体的标准规范
简介：
信息：ICS：27.120.30 CCS：发布：2015-06-01 实施：

KS A ISO 7476-2012(2017) 核燃料技术核级硝酸铀酰溶液中铀的测定重量法
简介：
信息：ICS：27.120.30 CCS：发布：2012-12-12 实施：

ISO 13465-2009 核能.核燃料技术.用分光光度测定法测定硝酸溶液中的镎
简介：
信息：ICS：27.120.30 CCS：F46 发布：2009-05 实施：

ASTM C1295-15 六氟化铀和硝酸铀溶液中裂变和衰变产物的伽马能量辐射的标准测试方法
简介：
信息：ICS：27.120.30 CCS：发布：2015-06-01 实施：

KS A ISO 9892-2012(2017) 金属铀、二氧化铀粉末和团块、硝酸铀酰溶液氟含量的测定氟离子选择电极法
简介：
信息：ICS：27.120.30 CCS：发布：2012-12-12 实施：

ASTM D1720-03(2008) 硝酸纤维素溶液中活性溶剂稀释比的标准测试方法
简介：
信息：ICS：87.060.30 CCS：发布：2008-11-01 实施：

ASTM C1295-2015 六氟化铀和硝酸铀酰溶液中裂变和衰变产物的伽马能量辐射的标准试验方法
简介：5.1x00a0;Specific gamma-ray emitting radionuclides in UF6 are identified and quantified using a high-resolution gamma-ray energy analysis system, which includes a high-resolution germanium detector. This test method shall be used to meet the health and safety specifications of C787, C788, and C996 regarding applicable fission products in reprocessed uranium solutions. This test method may also be used to provide information to parties such as conversion facilities on the level of uranium decay products in such materials. Pa-231 is a specific uranium decay product that may be present in uranium ore concentrate and is amenable to analysis by gamma spectrometry. 1.1x00a0;This test method covers the measurement of gamma energy emitted from fission products in uranium hexafluoride (UF6) and uranyl nitrate solution. This test method may also be used to measure the concentration of some uranium decay products. It is intended to provide a method for demonstrating compliance with UF6 specifications C787 and C996, uranyl nitrate specification C788, and uranium ore concentrate specification C967. 1.2x00a0;The lower limit of detection is 5000 MeV Bq/kg (MeV/kg per second) of uranium and is the square root of the sum of the squares of the individual reporting limits of the nuclides to be measured. The limit of detection was determined on a pure, aged natural uranium (ANU) solution. The value is dependent upon detector efficiency and background. 1.3x00a0;The fission product nuclides to be measured are 106Ru/106Rh,8201;103Ru, 137Cs, 144Ce, 144Pr, 141Ce, 95Zr, 95Nb, and 125Sb. Among the uranium decay product nuclides that may be measured is 231Pa. Other gamma energy-emitting fission and uranium decay nuclides present in the spectrum at detectable levels should be identified and quantified as required by the data quality objectives. 1.4x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：27.120.30 CCS：发布：2015 实施：

KS A ISO 9892-2012 铀金属、二氧铀粉末和芯块以及硝酸铀酰溶液.氟含量的测定.氟离子选择电极法
简介：1.1 이 표준은 금속 우라늄, 이산화우라늄 분말과 소결체 및 질산우라닐 용액 내 불소함량
信息：ICS：27.120.30 CCS：F46 发布：2012-12-12 实施：2012-12-12

ASTM C1477-08 通过多集电极电感耦合等离子体质谱法对六氟化铀和硝酸铀溶液进行同位素丰度分析的标准测试方法
简介：
信息：ICS：27.120.30 CCS：发布：2008-06-01 实施：

ISO 15366-2-2014 核燃料技术. 采用溶剂萃取色谱法对同位素和同位素稀释分析用的硝酸溶液进行铀和钚的化学分离和纯化. 第2部分: 纳克及以下范围内含钚和铀的样品
简介：
信息：ICS：27.120.30 CCS：F46 发布：2014-07 实施：

ASTM C1477-2008(2014) 多收集器感应耦合等离子质谱法分析六氟化铀和硝酸铀酰溶液同位素丰度的标准试验方法
简介：5.1x00a0;The test method is capable of measuring uranium isotopic abundances of8201;234U,8201;235U,8201; 236U and8201;238U as required by Specifications C787 and C996. 1.1x00a0;This test method covers the isotopic abundance analysis of8201;234U,8201;235U,8201;236 U and8201;238U in samples of hydrolysed uranium hexafluoride (UF6) by inductively coupled plasma source, multicollector, mass spectrometry (ICP-MC-MS). The method applies to material with8201; 235U abundance in the range of 0.2 to 68201;% mass. This test method is also described in ASTM STP 1344. 1.2x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：27.120.30 (Fissile materials and nuclear fuel tech CCS：发布：2008 实施：

ISO 15366-1-2014 核燃料技术. 采用溶剂萃取色谱法对同位素和同位素稀释分析用的硝酸溶液进行铀和钚的化学分离和纯化. 第1部分: 微克范围内含钚的样品和毫克范围内含铀的样品
简介：
信息：ICS：27.120.30 CCS：F46 发布：2014-07 实施：

KS A ISO 7476-2012(2022) 核燃料技术核级质量硝酸铀酰溶液中铀的测定重量法
简介：
信息：ICS：27.120.30 CCS：发布：2012-12-12 实施：

ASTM C1477-2008 多收集器感应耦合等离子质谱法分析六氟化铀和硝酸铀酰溶液同位素丰度的标准试验方法
简介：The test method is capable of measuring uranium isotopic abundances of 234U, 235U, 236U and 238U as required by Specifications C 787 and C 996.1.1 This test method covers the isotopic abundance analysis of 234U, 235U, 236U and 238U in samples of hydrolysed uranium hexafluoride (UF6) by inductively coupled plasma source, multicollector, mass spectrometry (ICP-MC-MS). The method applies to material with 235U abundance in the range of 0.2 to 6 % mass. This test method is also described in ASTM STP 1344. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：27.120.30 (Fissile materials and nuclear fuel tech CCS：F46 发布：2008 实施：