耐酸试验检测标准耐酸试验-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

耐酸试验相关标准参考信息

GB/T 5715-2013 纺织品色牢度试验耐酸斑色牢度
简介：本标准规定了测定各类纺织品耐有机酸和无机酸溶液的色牢度试验方法。本方法提供了四种不同酸溶液,按纤维的性质可采用其中一种或全部酸溶液。
信息：ICS：59.080.01 CCS：W55 发布：2013-11-12 实施：2014-05-01

BS EN ISO 105-E05-2010 纺织品.色牢度试验.耐酸斑腐蚀色牢度
简介：This part of ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds, andin all forms, to the action of dilute solutions of organic and mineral acids.Four tests differing in severity are provided. Any or all can be used, depending upon the nature of the fibre.
信息：ICS：59.080.01 CCS：W55 发布：2010-08-31 实施：2010-08-31

BS EN ISO 105-E13-1997 纺织品.色牢度试验.第E13部分:耐酸毡缩色牢度:加严试验
简介：This part of ISO 105 specifies a method for deter-mining the resistance of the colour of textiles of all forms to the action of acids, as used under severe conditions in the acid-felting process.
信息：ICS：59.080.01 CCS：W70 发布：1997-04-15 实施：1997-04-15

GB/T 2835-1998 陶管耐酸性能试验方法
简介：本标准规定了陶管耐酸性能试验的试样设备、仪器设备和试剂、试验步骤、结果计算、复验规则及试验报告等。本标准适用于带釉或不带釉陶管的耐酸性能试验。耐酸性能的优劣用耐酸度来表示。
信息：ICS：81.060.99 CCS：Q31 发布：1998-10-12 实施：1999-04-01

EN ISO 105-E05-2010 纺织品.色牢度试验.第E05部分:耐酸斑色牢度
简介：This part of ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds, and in all forms, to the action of dilute solutions of organic and mineral acids
信息：ICS：59.080.01 CCS：发布：2010-07-01 实施：

BS EN ISO 105-E14-1997 纺织品.色牢度试验.耐酸毡缩色牢度.淡色
简介：This part of ISO 105 specifies a method for deter-mining the resistance of the colour of textiles to the action of dilute and hot mineral acids, as used under mild felting conditions in the hat-making and felt in-dustries.
信息：ICS：59.080.01 CCS：W55 发布：1997-04-15 实施：1997-04-15

GB/T 5715-1997 纺织品色牢度试验耐酸斑色牢度
简介：本标准规定了一种方法以测定各类纺织品的颜色耐有机酸和无机酸稀溶液的能力。
信息：ICS：59.080.01 CCS：W04 发布：1997-06-09 实施：1997-12-01

ISO 105-E05-2010 纺织品.色牢度试验.第E05部分:耐酸斑色牢度
简介：This part of ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds, and in all forms, to the action of dilute solutions of organic and mineral acids. Four tests differing in severity are provided. Any or all can be used, depending upon the nature of the fibre.
信息：ICS：59.080.01 CCS：W70 发布：2010-07 实施：

NF G07-013-13-1997 纺织品.色牢度试验.第E13部分:耐酸毡缩的色牢度:强酸性
简介：
信息：ICS：59.080.01 CCS：W04 发布：1997-03-01 实施：1997-03-20

GB/T 1970-1996 多孔陶瓷耐酸、碱腐蚀性能试验方法
简介：本标准规定了多孔陶瓷耐酸、碱腐蚀性能的试验方法。本标准适用于多孔陶瓷的耐酸、碱腐蚀性的测定。
信息：ICS：81.060.20 CCS：Q32 发布：1996-09-13 实施：1997-04-01

ASTM C282-2010 搪瓷耐酸的标准试验方法(柠檬酸斑点试验)
简介：This test method is intended specifically for testing the porcelain enamel finish on stoves, refrigerators, table tops, sinks and other sanitary ware, laundry appliances, architectural units, etc., where the surface may come in contact with food acids at room temperature. Citric acid has been chosen as the test medium because it is one of the most common of the food acids and will generally provide a measurable result in its action on porcelain enamel.1.1 This test method covers a procedure for evaluating porcelain enamels in their resistance to citric acid exposure at room temperature. No attempt is made to categorize porcelain enamels as to their acid-resistance or non acid-resistance properties, since the requirements in the several branches of the industry differ. 1.2 The test method is applicable for ware of various shapes providing they contain a substantially flat area approximately 50 mm in diameter. 1.3 The test method is not applicable to finishes on chemical and hospital ware, which may come in contact with strong mineral acids, nor to cooking utensils, which may come in prolonged contact with hot acid solutions. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：25.220.50 (Enamels) CCS：Y26 发布：2010 实施：

EN ISO 105-E14-1996 纺织品.色牢度试验.第E14部分:耐酸毡缩色牢度:中性(ISO 105-E14-1994)
简介：
信息：ICS：59.080.01 CCS：发布：1996 实施：

GB 1223-1975 不锈耐酸钢晶间腐蚀倾向试验方法
简介：
信息：ICS： CCS：H25 发布：1975-12-24 实施：1976-7-1

KS K ISO 105-E14-2009 纺织品.色牢度试验.第E14部分:耐酸毡缩色牢度:柔和的
简介：이 표준은 모자 제조 및 펠트 산업에서 약한 펠팅 조건에 적용되는 것으로, 묽고 뜨거운 미
信息：ICS：59.080.01 CCS：W70 发布：2009-05-11 实施：2009-05-11

ISO 105-E14:1994 纺织及印刷业;；色牢度试验第E14部分:耐酸粘结色牢度:温和
简介：
信息：ICS：59.080.01 CCS：发布：1994-09-15 实施：

KS K ISO 105-X14-2021 纺织品.色牢度试验.第X14部分:羊毛耐酸氯化的色牢度:二氯异氰尿酸钠
简介：
信息：ICS：59.080.01 CCS：发布：2021-07-01 实施：

KS L 1553-2008 化学工业用耐酸陶瓷试验方法
简介：이 표준은 화학공업용 내산 도자기의 시험방법에 대하여 규정한다.
信息：ICS：71.120.00 CCS：Q32 发布：2008-10-30 实施：2008-10-30

ISO 105-E13:1994 纺织及印刷业;；色牢度试验第E13部分:耐酸粘结色牢度:严重
简介：
信息：ICS：59.080.01 CCS：发布：1994-09-15 实施：

KS K ISO 105-E05-2021 纺织品.色牢度试验.第E05部分:耐酸斑点色牢度
简介：
信息：ICS：59.080.01 CCS：发布：2021-07-01 实施：

KS K 0724-2007 纺织品耐酸斑色牢度试验法
简介：이 규격은 염색한 섬유 제품의 산 적하에 대한 염색 견뢰도 시험방법에 대하여 규정한다.
信息：ICS：59.080.01 CCS：W59 发布：2007-10-22 实施：2007-10-22

ISO 105-X14:1994 纺织及印刷业;；色牢度试验第X14部分:羊毛耐酸氯化色牢度:二氯异氰尿酸钠
简介：
信息：ICS：59.080.01 CCS：发布：1994-09-01 实施：

ISO 12960-2020 土工织物和土工织物相关产品.测定耐酸和耐碱液体的筛选试验方法
简介：
信息：ICS：59.080.70 CCS：发布：2020-05-29 实施：

KS K 0724-2007(2012) 纺织品色牢度试验第E05部分:耐酸斑点色牢度
简介：
信息：ICS：59.080.01 CCS：发布：2007-10-22 实施：

JIS L0851-1994 耐酸斑污色牢度的试验方法
简介：この規格は，染色した繊維品の酸滴下に対する染色堅ろう度試験方法について規定する。
信息：ICS：59.080.01 CCS：W70 发布：1994-02-01 实施：

ISO 12960:2020 土工织物和土工织物相关产品.测定耐酸和耐碱液体的筛选试验方法
简介：
信息：ICS：59.080.70 CCS：发布：2020-05-29 实施：

JC/T 258-1993 铸石制品性能试验方法耐酸、碱性能试验
简介：
信息：ICS：91.100 CCS：Q38 发布：1993-07-05 实施：1994-01-01

ASTM C1898-20 测定混凝土制品耐酸蚀性的标准试验方法
简介：
信息：ICS：91.100.30 CCS：发布：2020-05-01 实施：

DIN EN ISO 105-E05-2006 纺织品.色牢度试验.第E05部分:耐酸滴色牢度(ISO 105-E05-2006)
简介：This part of ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds, and in all forms, to the action of dilute solutions of organic and mineral acids.Four tests differing in severity are provided. Any or all may be used, depending upon the nature of the fibre.
信息：ICS：59.080.01 CCS：W70 发布：2006-10 实施：

JIS R1503-1991 化学工业用耐酸磁器的试验方法
简介：この規格は，化学工業用耐酸磁器の試験方法について規定する。
信息：ICS：81.060.01 CCS：Q32 发布：1991-10-01 实施：

FZ/T 50047-2019 聚酰亚胺纤维耐热、耐紫外光辐射及耐酸性能试验方法
简介：
信息：ICS：59.060.20 CCS：W50 发布：2019-11-11 实施：2020-04-01

ISO 105-E05-2006 纺织品.色牢度试验.第E05部分:耐酸斑色牢度
简介：This part of ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds, and in all forms, to the action of dilute solutions of organic and mineral acids.Four tests differing in severity are provided. Any or all may be used, depending upon the nature of the fibre.
信息：ICS：59.080.01 CCS：W70 发布：2006-07 实施：

ISO 105-E05:1989 纺织品色牢度试验第E05部分:耐酸斑点色牢度
简介：
信息：ICS：59.080.01 CCS：发布：1989-12-07 实施：

FZ/T 50026-2014 聚苯硫醚纤维耐酸、耐碱、耐高温性能试验方法
简介：本标准规定了聚苯硫醚纤维经酸、碱液浸泡和高温烘烤后的断裂强力保持率试验方法。本标准适用于聚苯硫醚纤维,其他纤维可参照使用。
信息：ICS：59.060.20 CCS：W50 发布：2014-12-24 实施：2015-06-01

ISO 105-E05:2006 纺织品色牢度试验第E05部分:耐酸斑点色牢度
简介：
信息：ICS：59.080.01 CCS：发布：2006-06-21 实施：

ISO 105-E05-1989 纺织品色牢度试验第E05部分:耐酸斑色牢度
简介：Drops of a solution of acid are placed on the specimen, the surface of which is rubbed gently with a glass rod to ensure penetration. The changes in colour of the textile, while it is still wet and after drying, are assessed with the grey scale. Three tests differing in severity are provided.
信息：ICS：59.080.01 CCS：W70 发布：1989-12 实施：1989-12-15

KS L 1553-2013 化学工业用耐酸陶瓷试验方法
简介：이 표준은 화학공업용 내산 도자기의 시험방법에 대하여 규정한다.
信息：ICS：71.120.00 CCS：Q32 发布：2013-10-26 实施：2013/10/26

FORD FLTM BI 113-05-2003 涂漆试验板或实际成品部件的耐酸斑性能［替代:FORD FLTM BI 013-05］
简介：
信息：ICS： CCS：发布：2003-03-06 实施：

ISO 105-E13:1987 纺织品.色牢度试验.第E13部分:耐酸毡缩色牢度:重度
简介：
信息：ICS：59.080.01 CCS：发布：1987-12-17 实施：

HG/T 3210-2002 耐酸陶瓷材料性能试验方法
简介：本标准规定了耐酸陶瓷材料抗压强度、抗弯强度、抗拉强度、抗冲击强度、吸水率、气孔率、体积密度、耐酸度、耐碱度及耐温度急变性等性能的试验方法。本标准适用于化学工业及其他工业用耐酸陶瓷设备及零部件的材料性能试验。
信息：ICS：71.120;81.060 CCS：G94 发布：2002-09-28 实施：2003-06-01

ISO 105-E05:1987 纺织品色牢度试验第E05部分:耐酸斑点色牢度
简介：
信息：ICS：59.080.01 CCS：发布：1987-12-17 实施：

JIS L0851-2013 耐酸斑污色牢度的试验方法
简介：This Standard specifies testing methods of dyed textile products for colour fastness to acid spotting.
信息：ICS：59.080.01 CCS：W70 发布：2013-02-20 实施：

ASTM D3260-2001 适用于工厂的压制铝制品透明涂层的耐酸和耐灰浆标准试验方法
简介：1.1 This test method covers the evaluation of the mortar and acid resistance of clear protective coating factory applied to extruded aluminum substrates.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.020 (Paint coating processes) CCS：G50 发布：2001 实施：

ISO 105-E14:1987 纺织品.色牢度试验.第E14部分:耐酸毡缩色牢度:温和
简介：
信息：ICS：59.080.01 CCS：发布：1987-12-17 实施：

ASTM D3260-2001(2005) 适用于工厂的压制铝制品透明涂层的耐酸和耐灰浆标准试验方法
简介：This test method will provide differentiation between types of coatings for acid and motor resistance providing the coating is applied in a uniform continuous film with a specified film thickness.1.1 This test method covers the evaluation of the mortar and acid resistance of clear protective coating factory applied to extruded aluminum substrates.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.020 (Paint coating processes) CCS：G50 发布：2001 实施：

ISO 105-E05-1987 纺织品色牢度试验第E05部分:耐酸斑点色牢度
简介：
信息：ICS：59.080.01 CCS：发布：1987-12-17 实施：

NF D14-506-2012 卫生设备.搪瓷表面在室温下的耐酸性能.常规的试验方法
简介：
信息：ICS：25.220.50;91.140.70 CCS：Q81 发布：2012-02-01 实施：2012-02-04

ASTM D3260-2001(2011) 适用于工厂的压制铝制品透明涂料的耐酸和耐灰浆标准试验方法
简介：This test method will provide differentiation between types of coatings for acid and motor resistance providing the coating is applied in a uniform continuous film with a specified film thickness.1.1 This test method covers the evaluation of the mortar and acid resistance of clear protective coating factory applied to extruded aluminum substrates. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.020 (Paint coating processes) CCS：G50 发布：2001 实施：

ISO 105-E14-1987 纺织品.色牢度试验.第E14部分:耐酸毡缩色牢度:柔和的
简介：
信息：ICS：6495;6610 CCS：W04 发布：1987-12 实施：

KS K ISO 105-E05-2010 纺织品.色牢度试验.第E05部分:耐酸斑色牢度
简介：이 표준은 모든 섬유제품의 유기산 및 무기산에 대한 염색 견뢰도에 대하여 규정한다.
信息：ICS：59.080.01 CCS：W70 发布：2010-12-24 实施：2010-12-24

CNS 9019-1999 耐酸滴染色坚牢度试验法
简介：本标准规定纤维制品之耐酸滴染色坚牢度试验法。
信息：ICS：59.080.01 CCS：发布：1999-08-27 实施：1999-08-27

ISO 105-E13-1987 纺织品.色牢度试验.第E13部分:耐酸毡缩色牢度:强烈的
简介：
信息：ICS：6495;6610 CCS：W04 发布：1987-12 实施：

ASTM C282-1999 搪瓷耐酸的标准试验方法(柠檬酸斑点试验)
简介：1.1 This test method covers a procedure for evaluating porcelain enamels in their resistance to citric acid exposure at room temperature. No attempt is made to categorize porcelain enamels as to their acid-resistance or non acid-resistance properties, since the requirements in the several branches of the industry differ. 1.2 The test method is applicable for ware of various shapes providing they contain a substantially flat area approximately 50 mm in diameter. 1.3 The test method is not applicable to finishes on chemical and hospital ware, which may come in contact with strong mineral acids, nor to cooking utensils, which may come in prolonged contact with hot acid solutions. 1.4 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：25.220.50 (Enamels) CCS：Y26 发布：1999 实施：

NF D14-506-1985 卫生设备.搪瓷表面在室温下的耐酸性能.常规的试验方法
简介：
信息：ICS：25.220.50 CCS：Y26;Q81 发布：1985-12-01 实施：1985-12-20

DIN EN ISO 105-E05-2010 纺织品.色牢度试验.第E05部分:耐酸斑色牢度(ISO 105-E05-2010).德文版本EN ISO 105-E05-2010
简介：
信息：ICS：59.080.01 CCS：W55 发布：2010-12 实施：

ASTM C282-1999(2005) 搪瓷耐酸的标准试验方法(柠檬酸斑点试验)
简介：This test method is intended specifically for testing the porcelain enamel finish on stoves, refrigerators, table tops, sinks and other sanitary ware, laundry appliances, architectural units, etc., where the surface may come in contact with food acids at room temperature. Citric acid has been chosen as the test medium because it is one of the most common of the food acids and will generally provide a measurable result in its action on porcelain enamel.1.1 This test method covers a procedure for evaluating porcelain enamels in their resistance to citric acid exposure at room temperature. No attempt is made to categorize porcelain enamels as to their acid-resistance or non acid-resistance properties, since the requirements in the several branches of the industry differ.1.2 The test method is applicable for ware of various shapes providing they contain a substantially flat area approximately 50 mm in diameter.1.3 The test method is not applicable to finishes on chemical and hospital ware, which may come in contact with strong mineral acids, nor to cooking utensils, which may come in prolonged contact with hot acid solutions.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：25.220.50 (Enamels) CCS：Y26 发布：1999 实施：

ASTM D3260-1982(1996)e1 适用于工厂的压制铝制品透明涂层的耐酸和耐灰浆标准试验方法
简介：1.1 This test method covers the evaluation of the mortar and acid resistance of clear protective coating factory applied to extruded aluminum substrates.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.020 (Paint coating processes) CCS：G50 发布：1982 实施：