溶剂型涂料检测标准溶剂型涂料-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

溶剂型涂料相关标准参考信息

GB/T 25264-2010 溶剂型丙烯酸树脂涂料
简介：本标准规定了溶剂型丙烯酸树脂涂料的分类、要求、试验方法、检验规则、包装、标志和贮存等。本标准适用于以丙烯酸树脂为主要成膜物质的溶剂型单组分面漆。产品主要用于各类金属及塑料等表面的装饰与保护。本标准不适用于辐射固化丙烯酸树脂涂料。
信息：ICS：87.040 CCS：G51 发布：2010-09-26 实施：2011-08-01

KS M 6020-2009 溶剂型涂料
简介：이 표준은 착색 안료, 체질 안료와 알키드계 수지 등을 주원료로 한 알키드 도료와 안료,
信息：ICS：87.04 CCS：G57 发布：2009-01-16 实施：2009-01-16

ASTM D2698-2005 高速离心法测定可还原溶剂型涂料中颜料含量的标准试验方法
简介：This test method describes a rapid method for separating pigment from solvent-reducible paints. This test method is used by paint producers and consumers for product acceptance and process control.1.1 This test method covers the separation of pigment from solvent-reducible paints and the calculation of the percent pigment from the results of nonvolatile determinations on the total paint and the separated vehicle. Note 1This test method has been proven to be applicable to most solvent-reducible paints, the exception being those paints containing severely bleeding pigments or pigments such as carbon black that are very difficult or impossible to centrifuge.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.060.10 (Pigments and extenders) CCS：G50 发布：2005 实施：

GB/T 23996-2009 室内装饰装修用溶剂型金属板涂料
简介：本标准规定了室内装饰装修用溶剂型金属板涂料的要求、试验方法、检验规则、标志、包装、贮存等要求。本标准适用于室内装饰装修用金属板工厂预涂装溶剂型涂料，该涂料主要用于天花板、墙面、装饰板、橱柜等表面装饰和保护。
信息：ICS：87.040 CCS：G51 发布：2009-06-02 实施：2010-02-01

ASTM D6133-02 通过直接注入气相色谱仪测定溶剂型和水性涂料、涂料、树脂和原料中丙酮、p-三氟氯苯甲酸、乙酸甲酯或t-乙酸丁酯含量的标准试验方法
简介：
信息：ICS：87.040 CCS：发布：2002-12-10 实施：

GB/T 9757-2001 溶剂型外墙涂料
简介：本标准规定了溶剂型外墙涂料的产品分等、要求、试验方法、检验规则及标志、包装、贮存等要求。本标准适用于以合成树脂为基料，与颜料、体质颜料及各种助剂配制而成的，施涂后能形成表面平整的薄质涂层的溶剂型外墙涂料。该涂料适用于建筑物和构筑物等外表面的装饰和防护。
信息：ICS：87.040 CCS：G51 发布：2001-09-06 实施：2002-04-01

SN/T 2187-2008 溶剂型涂料中苯、甲苯、二甲苯和甲苯二异氰酸酯的测定.衍生反应-气相色谱法
简介：本标准规定了溶剂型涂料中苯、甲苯、二甲苯和甲苯二异氰酸酯含量的衍生反应-气相色谱测定方法。本标准适用于溶剂型涂料中苯、甲苯、二甲苯和甲苯二异氰酸酯单体的测定。
信息：ICS： CCS：G50 发布：2008-11-18 实施：2009-06-01

ASTM D5087-02 测定从溶剂型汽车涂料中释放并可在VOC控制装置中去除的挥发性有机化合物（VOC）量的标准试验方法（减少）
简介：
信息：ICS：87.040 CCS：发布：2002-01-10 实施：

KS M 6020-2022 溶剂型涂料
简介：
信息：ICS：87.040 CCS：发布：2022-11-09 实施：

ASTM D5087-02(2008) 测定从溶剂型汽车涂料中释放并可在VOC控制装置中去除的挥发性有机化合物（VOC）量的标准试验方法（减少）
简介：
信息：ICS：87.040 CCS：发布：2008-02-01 实施：

ASTM D5087-91(1994) 测定从溶剂型汽车涂料中释放并可在VOC控制装置中去除的挥发性有机化合物（VOC）量的标准试验方法（减少）
简介：
信息：ICS：87.040 CCS：发布：2002-01-10 实施：

T/CEC 511-2021 绝缘子用无溶剂型硅橡胶防污闪涂料
简介：本文件规定了绝缘子用无溶剂型硅橡胶防污闪涂料的产品分类、技术要求、检验规则、标志，以及包装、贮存与使用。本文件适用于交直流架空电力线路、发电厂、变电站及换流站等输变电设备绝缘子使用的无溶剂型硅橡胶防污闪涂料。本文件适用于无溶剂型硅橡胶防污闪涂料的浸涂、淋涂、喷涂、刷涂工艺。其中，中温固化无溶剂型防污闪涂料仅用于绝缘子工厂复合化。
信息：ICS：29.080.10 CCS：D4420 发布：2021-06-29 实施：2022-07-02

ASTM D6133-02(2008) 通过直接注入气相色谱仪测定溶剂型和水性涂料、涂料、树脂和原料中丙酮、p-三氟氯苯甲酸、乙酸甲酯或t-乙酸丁酯含量的标准试验方法
简介：
信息：ICS：87.040 CCS：发布：2008-02-01 实施：

ASTM D2621-87(2000) 用于溶剂型可降解涂料的车辆固体红外鉴定的标准测试方法
简介：
信息：ICS：87.060.20 CCS：发布：2000-01-01 实施：

ASTM D5087-02(2021) 测定从溶剂型汽车涂料中释放并可在VOC控制装置中去除的挥发性有机化合物（VOC）量的标准试验方法（减少）
简介：
信息：ICS：87.040 CCS：发布：2021-02-01 实施：

SANS 731-1-2006 道路标记．第1部分：单包装溶剂型涂料
简介：This part of SABS 731 specifies requirements for conventional solvent-borne paints suitable for marking traffic-bearing bituminous or concrete road and runway surfaces, and makes provision for white, yellow and other colours.
信息：ICS：87.040;93.080.20;93.120 CCS：Q84 发布：2006-12-15 实施：

ASTM D2621-87(1995)e1 用于溶剂型可降解涂料的车辆固体红外鉴定的标准测试方法
简介：
信息：ICS： CCS：发布：2000-01-01 实施：

ASTM D6133-02(2021) 通过直接注入气相色谱仪测定溶剂型和水性涂料、涂料、树脂和原材料中丙酮、p-三氟化氯苯甲酸甲酯、乙酸甲酯或t-乙酸丁酯含量的标准试验方法
简介：
信息：ICS：87.040 CCS：发布：2021-02-01 实施：

HG/T 2454-2006 溶剂型聚氨酯涂料(双组分)
简介：本标准规定了溶剂型聚氨酯涂料产品的分类、要求、试验方法、检验规则、标志、包装和贮存等内容。本标准适用于以含反应性官能团的聚酯树脂、醇酸树脂、丙烯酸树脂等为主要成膜物，以多异氰酸酯树脂为固化剂的双组分常温固化型金属表面用涂料和室内用木器涂料。
信息：ICS：87.040 CCS：G51 发布：2006-07-26 实施：2007-03-01

ASTM D2698-90(1999) 通过高速离心测定溶剂型可降解涂料的颜料含量的标准测试方法
简介：
信息：ICS：87.060.10 CCS：发布：1999-05-10 实施：

T/ZZB 1887-2020 溶剂型高固体分地坪涂料
简介：本文件规定了溶剂型高固体分地坪涂料的术语和定义、产品分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存及质量承诺。本文件适用于以环氧树脂等合成树脂为基料及各种颜填料、助剂配制而成的，用于混凝土基面防护的溶剂型高固体分地坪涂料。
信息：ICS：87.040 CCS：C264 发布：2020-11-18 实施：2020-11-29

AS 3730.28-2006 建筑物用涂料的特性指南．室外用溶剂型木材着色剂
简介：Provides a guide to the features and typical characteristics that are expected of a solvent-borne wood stain (opaque or semi-transparent), when applied by brush, in accordance with the manufacturer's instructions, to rough-sawn or dressed timber.
信息：ICS：87.040 CCS：发布：2006-02-09 实施：

SY/T 0544-1995 石油钻杆溶剂型涂料内涂层技术条件
简介：
信息：ICS： CCS：E61 发布：1995-11-08 实施：1996-05-01

T/CNCIA 01001-2016 汽车用高固体分溶剂型涂料
简介：本标准规定了汽车用高固体分溶剂型涂料产品的分类、要求、试验方法、检验规则及标志、包装和贮存等内容。本标准适用于高固体分溶剂型涂料产品、用于汽车表面起装饰和保护的原厂涂料。产品用于乘用车、商用车、挂车、汽车列车等。
信息：ICS：01.040.87 CCS：C2641 发布：2016-12-28 实施：2017-03-01

AS 3730.29-2006 建筑物用涂料的特性指南．室外/室内用溶剂型铺面涂料
简介：Provides a guide to the features and typical characteristics that are expected of a solvent-borne exterior/interior paving paint, when applied by brush, roller or sprayer, in accordance with the manufacturer's instructions.
信息：ICS：87.040 CCS：发布：2006-02-09 实施：

FORD WSK-M5G55-A-1992 晾干式溶剂型车身下部用涂料［替代:FORD SK-M5G9500-A］
简介：
信息：ICS： CCS：发布：1992-05-01 实施：

ASTM D2621-87(2016) 用于溶剂型可降解涂料的车辆固体红外鉴定的标准测试方法
简介：
信息：ICS：87.060.20 CCS：发布：2016-12-01 实施：

AS 3730.22-2006 建筑物用涂料的特性指南．室内/室外用溶剂型混凝土和砖石建筑封闭漆
简介：Provides a guide to the features and typical characteristics that are expected of a solvent-borne concrete and masonry sealer for interior and exterior use, when applied by brush or roller in accordance with the manufacturer's instructions.
信息：ICS：87.040 CCS：发布：2006-02-08 实施：

ASTM D2351-1990(2005) 从可还原溶剂型涂料分离出的白色颜料中硫化物的标准试验方法
简介：Sulfide containing pigments such as lithopone have been used in paints in varying degrees in the past years. As such it is useful to formulators and users to be able to monitor the amount of this compound in whole paints.1.1 This test method covers the determination of sulfide sulfur in white pigment separated from solvent-reducible paints.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.060.10 (Pigments and extenders) CCS：G53 发布：1990 实施：

HG/T 5061~5064-2016 汽车修补用涂料、银镜镜背用涂料、桥梁钢缆用柔性防护涂料和溶剂型聚氨酯木器涂料用固化剂 (2016)
简介：
信息：ICS： CCS：G51 发布：2016-10-22 实施：2017-04-01

AS 3730.25-2006 建筑物用涂料的特性指南．室内用溶剂型罩光漆
简介：Provides a guide to the features and typical characteristics that are expected of an interior clear finish paint, when applied by brush, roller or sprayer in accordance with the manufacturer??s instructions.
信息：ICS：87.040 CCS：发布：2006-02-03 实施：

ASTM D2349-1990(2014) 可还原溶剂型涂料溶剂组份的自然定性测定的标准试验方法
简介：3.1x00a0;This test method provides a procedure for determining qualitatively the composition of solvent in paints containing only hydrocarbon solvents. 1.1x00a0;This test method covers the determination of the nature of solvent in solvent-reducible house paints containing only hydrocarbon solvents. 1.2x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3x00a0;This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.060.30 (Solvents) CCS：G51 发布：1990 实施：

ASTM D2698-05(2015) 通过高速离心测定溶剂型可降解涂料的颜料含量的标准测试方法
简介：
信息：ICS：87.060.10 CCS：发布：2015-06-01 实施：

AS 3730.21-2006 建筑物用涂料的特性指南．铁类金属表面用溶剂型涂底漆
简介：Provides a guide to the features and typical characteristics that are expected of a solvent-borne metal prime, when applied by brush, roller or sprayer in accordance with the manufacturer's instructions.
信息：ICS：87.040 CCS：发布：2006-02-03 实施：

ASTM D2350-1990(2005) 从可还原溶剂型涂料分离出的白色颜料中氧化锑的试验方法
简介：Antimony trioxide is often used in fire-retardant paints, so it is useful to formulators and users to be able to monitor the amount of this compound in whole paints.1.1 This test method covers the determination of the total antimony oxide in white pigment separated from solvent-reducible paints.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.060.10 (Pigments and extenders) CCS：G53 发布：1990 实施：

HG/T 2454-2014 溶剂型聚氨酯涂料(双组分)
简介：本标准规定了溶剂型聚氨酯涂料产品的分类，要求、试验方法、检验规则、标志、包装和贮存等内容。本标准适用于以含反应性官能团的聚酯树脂、醇酸树脂、丙烯酸树脂等为主要成膜物，并加入颜填料(清漆不加)、溶剂、助剂等辅料作为主剂，以多异氰酸酯树脂为同化剂的双组分常温同化型混凝土和金属表面用涂料。本标准不适用于建筑外墙、地坪用聚氨酯涂料。
信息：ICS：87.040 CCS：G51 发布：2014-12-31 实施：2015-06-01

AS 3730.13-2006 建筑物用涂料的特性指南．室内/室外用溶剂型木材涂底漆
简介：Provides a guide to the features and typical characteristics that are expected of a solvent-borne wood primer, when applied by brush in accordance with the manufacturer??s directions.
信息：ICS：87.040 CCS：发布：2006-02-02 实施：

ASTM D2350-1990(2010) 从溶剂型涂料分离出的白色颜料中氧化锑的标准试验方法
简介：Antimony trioxide is often used in fire-retardant paints, so it is useful to formulators and users to be able to monitor the amount of this compound in whole paints.1.1 This test method covers the determination of the total antimony oxide in white pigment separated from solvent-reducible paints. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.060.10 CCS：G53 发布：1990 实施：

KS M 6020-2014(2017) 溶剂型涂料
简介：
信息：ICS：87.040 CCS：发布：2014-09-23 实施：

AS 3730.14-2006 建筑物用涂料的特性指南．室内/室外用溶剂型底漆
简介：Provides a guide to the features and typical characteristics that are expected of a solvent-borne undercoat for interior and exterior use, when applied by brush, roller or sprayer in accordance with the manufacturer??s instructions.
信息：ICS：87.040 CCS：发布：2006-02-02 实施：

ASTM D2351-1990(2010) 从可还原溶剂型涂料分离出的白色颜料中硫化物的标准试验方法
简介：Sulfide containing pigments such as lithopone have been used in paints in varying degrees in the past years. As such it is useful to formulators and users to be able to monitor the amount of this compound in whole paints.1.1 This test method covers the determination of sulfide sulfur in white pigment separated from solvent-reducible paints. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.060.10 CCS：G53 发布：1990 实施：

ASTM D6133-02(2014) 通过直接注入气相色谱仪测定溶剂型和水性涂料、涂料、树脂和原料中丙酮、p-三氟氯苯甲酸、乙酸甲酯或t-乙酸丁酯含量的标准试验方法
简介：
信息：ICS：87.040 CCS：发布：2014-07-01 实施：

AS 3730.6-2006 建筑物用涂料的特性指南．溶剂型室内/室外全光瓷漆
简介：Provides a guide to the features and typical characteristics that are expected of a solvent-borne interior/exterior full gloss enamel finish paint, when applied by brush, roller or sprayer, in accordance with the manufacturer??s instructions.
信息：ICS：87.040 CCS：发布：2006-01-30 实施：

ASTM D2245-1990(2011) 还原溶剂型涂料中油类及油酸类鉴定的标准试验方法
简介：This test method provides a procedure to identify the fatty acids present in the vehicle of a paint.1.1 This test method covers the identification of oils and oil acids in vehicles that have been separated from solvent-reducible paints. The test method is based on a gas chromatographic technique (of the methyl esters) applicable to products containing both saturated and unsaturated, animal and vegetable, unpolymerized or partially polymerized fatty acids having 8 to 20 carbon atoms. 1.2 This test method is not applicable to products containing fatty acids that have been polymerized or oxidized to such an extent that no characteristic monomeric fatty acids remain. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 (Paints and varnishes) CCS：G51 发布：1990 实施：

JT/T 821.1-2011 混凝土桥梁结构表面用防腐涂料.第1部分：溶剂型涂料
简介：JT/T 821的本部分规定了混凝土桥梁结构表面用长效溶剂型防腐涂料的分类和分级、要求、试验方法、检验规则、标志、包装和储存等内容。本部分适用于混凝土桥梁结构表面用长效溶剂型防腐涂料，主要用于大气区或施工及养护时处于大气环境下干湿交替区的混凝土结构表面防护和修饰。本部分不适用于柔性涂料。
信息：ICS：93.040;87.040 CCS：G51;P28 发布：2011-11-28 实施：2012-04-01

AS 3730.5-2006 建筑物用涂料的特性指南．溶剂型室内/室外亚光
简介：Provides a guide to the features and typical characteristics that are expected of a solvent-borne, interior semi-gloss enamel finish paint, when applied by brush, roller or sprayer in accordance with the manufacturer????s instructions.
信息：ICS：87.040 CCS：发布：2006-01-30 实施：

ASTM D3271-1987(2012) 直接把可还原溶剂型涂料注射到气相色谱仪中进行溶剂分析的标准实施规程
简介：4. Significance and UseTop Bottom 4.1 Gas chromatographic separation of solvents present in whole paints is the preferred first step for identifying and quantitating solvent compositions, using auxiliary procedures and techniques. 1.1 This practice describes the techniques used to inject whole paint samples directly into a gas chromatograph to obtain a chromatogram from which the solvent composition may be established.2,3 1.2 This practice is not designed to be quantitative. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. A specific hazard statement is given in 6.1.
信息：ICS：87.060.30 (Solvents) CCS：G51 发布：1987 实施：

ASTM D2621-87(2011) 用于溶剂型可降解涂料的车辆固体红外鉴定的标准测试方法
简介：
信息：ICS：87.060.20 CCS：发布：2011-06-01 实施：

ASTM D2621-87(2005) 用于溶剂型可降解涂料的车辆固体红外鉴定的标准测试方法
简介：
信息：ICS：87.060.20 CCS：发布：2005-07-01 实施：

ASTM D2621-1987(2011) 可变形溶剂型涂料中固体漆料的红外鉴别标准试验方法
简介：The ability to qualitatively identify paint vehicles is useful for characterizing unknown or competitive coatings, for complaint investigations, and for in-process control.1.1 This test method covers the qualitative characterization or identification of separated paint vehicle solids by infrared spectroscopy within the limitations of infrared spectroscopy. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.060.20 (Binders) CCS：G51 发布：1987 实施：

SN/T 2935-2011 进出口溶剂型涂料中苯、甲苯、二甲苯和邻苯二甲酸酯的测定.气相色谱法
简介：本标准规定了溶剂型涂料中苯、甲苯、二甲苯和邻苯二甲酸二乙酯、邻苯二甲酸丁基苄基酯、邻苯二甲酸二丁酯、邻苯二甲酸二（2-乙基己基）酯、邻苯二甲酸二正辛酯含量的气相色谱检测方法。本标准适用于溶剂型涂料中苯系物和邻苯二甲酸酯的测定。
信息：ICS： CCS：G51 发布：2011-05-31 实施：2011-12-01

SN/T 1545-2005 进出口溶剂型涂料中苯系物和游离二异氰酸酯类单体的同时测定方法.气相色谱法
简介：本标准规定了溶剂型涂料中苯系物(苯、甲苯、二甲苯)和二异氰酸酯类单体(甲苯二异氰酸酯、己二异氰酸酯、异佛尔酮二异氰酸酯和二苯甲烷二异氰酸酯)含量的气相色谱检测方法。本标准适用于溶剂型涂料中苯系物和二异氰酸酯类单体的测定。
信息：ICS： CCS：G50 发布：2005-02-17 实施：2005-07-01

ASTM D2371-1985(2010) 可还原溶剂型涂料中颜料含量的标准试验方法
简介：This test method is suitable for setting specifications for the pigment content of solvent-reducible paints as well as for monitoring manufacturing quality control. This test method provides the isolated pigment fraction from solvent-reducible paints that may be used for pigment analysis.1.1 This test method covers the procedure for the quantitative separation of the vehicle from the pigment in solvent-reducible coatings. 1.2 This test method has been proven to be applicable to the following types of paints: white linseed oil outside house paint, white soya and phthalic alkyd enamel, white linseed o-phthalic alkyd enamel, red lead primer, zinc chromate primer, flat white inside enamel, white epoxy enamel, white vinyl toluene modified alkyd, and white amino modified baking enamel. It is considered to be applicable to most solvent-reducible paints. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 6.
信息：ICS：87.060.10 CCS：G53 发布：1985 实施：

ASTM D2698-05(2010) 通过高速离心测定溶剂型可降解涂料的颜料含量的标准测试方法
简介：
信息：ICS：87.060.10 CCS：发布：2010-12-01 实施：

ASTM D2698-05 通过高速离心测定溶剂型可降解涂料的颜料含量的标准测试方法
简介：
信息：ICS：87.060.10 CCS：发布：2005-01-01 实施：

ASTM D2371-1985(2005) 可还原溶剂型涂料中颜料含量的测试方法
简介：This test method is suitable for setting specifications for the pigment content of solvent-reducible paints as well as for monitoring manufacturing quality control. This test method provides the isolated pigment fraction from solvent-reducible paints that may be used for pigment analysis. 1.1 This test method covers the procedure for the quantitative separation of the vehicle from the pigment in solvent-reducible coatings.1.2 This test method has been proven to be applicable to the following types of paints: white linseed oil outside house paint, white soya and phthalic alkyd enamel, white linseed o-phthalic alkyd enamel, red lead primer, zinc chromate primer, flat white inside enamel, white epoxy enamel, white vinyl toluene modified alkyd, and white amino modified baking enamel. It is considered to be applicable to most solvent-reducible paints.1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section .
信息：ICS：87.060.10 (Pigments and extenders) CCS：G50 发布：1985 实施：

SN/T 2251-2009 溶剂型涂料中苯、甲苯、二甲苯和甲苯二异氰酸酯的测定.顶空GC-MS法
简介：本标准规定了溶剂型涂料中苯、甲苯、二甲苯和甲苯二异氰酸酯含量的顶空GC-MS检测方法。本标准适用于溶剂型涂料中苯、甲苯、二甲苯和甲苯二异氰酸酯的测定。
信息：ICS：87.010 CCS：G50 发布：2009-02-20 实施：2009-09-01

ASTM D2698-2005(2010) 高速离心法测定溶剂型涂料中颜料含量的方法
简介：This test method describes a rapid method for separating pigment from solvent-reducible paints. This test method is used by paint producers and consumers for product acceptance and process control.1.1 This test method covers the separation of pigment from solvent-reducible paints and the calculation of the percent pigment from the results of nonvolatile determinations on the total paint and the separated vehicle. Note 18212;This test method has been proven to be applicable to most solvent-reducible paints, the exception being those paints containing severely bleeding pigments or pigments such as carbon black that are very difficult or impossible to centrifuge. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.060.10 CCS：G51 发布：2005 实施：

ASTM D2372-1985(2010) 从可还原溶剂型涂料中分离载色体的标准实施规程
简介：Separation of the vehicle from the pigment in solvent-reducible paints is required in order to characterize paint vehicles by chemical, spectroscopic, or chromatographic techniques. Characterization of vehicles is important since they play a major role in the performance of coatings.1.1 This practice covers the procedure for the separation of the vehicle from the pigment in solvent-reducible paint. 1.2 In the development of the practice the following materials were tested: white soya and white fish oil isophthalic alkyd semi-gloss enamels, white linseed oil paint, white soya and white linseed o-phthalic alkyd enamels. It is considered to be applicable to similar materials. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.060.20 CCS：G51 发布：1985 实施：