荣誉资质图片

cma资质(CMA)     CNAS资质(CNAS)     iso体系(ISO) 高新技术企业(高新技术企业)

摩擦磨损试验机相关标准参考信息

GB/T 38074-2019 手动变速箱润滑油摩擦磨损性能的测定 SRV试验机法
简介:
信息:ICS:75.100 CCS:E34 发布:2019-10-18 00:00:00.0 实施:2020-05-01 00:00:00.0

ASTM D2714-94(2009) Falex Block-on-Ring摩擦磨损试验机的标定和操作标准测试方法
简介:
信息:ICS:19.060 CCS发布:2009-10-01 实施

JJF(建材)147-2018 小样缩比惯性摩擦磨损性能试验机校准规范
简介:
信息:ICSCCS发布实施

ASTM D8316-20 用SRV试验机测量具有滚子盘几何形状的极压(EP)润滑油的摩擦和磨损性能的标准试验方法
简介:
信息:ICS:75.100 CCS发布:2020-05-01 实施

ASTM D5707-05 用高频线性振荡(SRV)试验机测量润滑脂摩擦磨损性能的标准试验方法
简介:
信息:ICS:75.100 CCS发布:2005-11-01 实施

NB/SH/T 0721-2016 润滑脂摩擦磨损性能的测定 高频线性振动试验机(SRV)法
简介:
信息:ICSCCS发布实施:2017-05-01

ASTM D6425-19 用SRV试验机测量极压(EP)润滑油的摩擦和磨损特性的标准试验方法
简介:
信息:ICS:75.100 CCS发布:2019-12-15 实施

ASTM D6425-05 用SRV试验机测量极压(EP)润滑油的摩擦和磨损特性的标准试验方法
简介:
信息:ICS:75.100 CCS发布:2005-07-01 实施

简介: 信息:

ASTM D2714-94(2019) Falex Block-on-Ring摩擦磨损试验机的标定和操作标准测试方法
简介:
信息:ICS:19.060 CCS发布:2019-05-01 实施

ASTM D6425-2005(2010)e1 用SRV试验机测量极压(EP)润滑油摩擦和磨损特性的标准试验方法
简介:This test method can be used to determine anti-wear properties and coefficient of friction of EP lubricating oils at selected temperatures and loads specified for use in applications in which high-speed vibrational or start-stop motions are present for extended periods of time under initial high Hertzian point contact pressures. It has found application as a screening test for lubricants used in gear or cam/follower systems. Users of this test method should determine whether results correlate with field performance or other applications.1.1 This test method covers an extreme pressure (EP) lubricating oil''s coefficient of friction and its ability to protect against wear when subjected to high-frequency, linear oscillation motion. The procedure is identical to that described in DIN 51834. 1.2 This test method can also be used to determine the ability of a non-EP lubricating oil to protect against wear and its coefficient of friction under similar test conditions. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息:ICS:75.100 CCS:E34 发布:2005 实施

简介: 信息:

ASTM D3702-94(2019) 使用推力垫圈试验机自润滑接触的材料摩擦磨损率和摩擦系数的标准试验方法
简介:
信息:ICS:19.060 CCS发布:2019-05-01 实施

ASTM D5707-2005(2011)e1 使用高频线性振荡(SRV)试验机测量润滑脂摩擦和磨损特性的标准试验方法
简介:This test method can be used to determine wear properties and coefficient of friction of lubricating greases at selected temperatures and loads specified for use in applications where high-speed vibrational or start-stop motions are present for extended periods of time under initial high Hertzian point contact pressures. This test method has found application in qualifying lubricating greases used in constant velocity joints of front-wheel-drive automobiles and for lubricating greases used in roller bearings. Users of this test method should determine whether results correlate with field performance or other applications.1.1 This test method covers a procedure for determining a lubricating grease's coefficient of friction and its ability to protect against wear when subjected to high-frequency, linear-oscillation motion using an SRV test machine at a test load of 200 N, frequency of 50 Hz, stroke amplitude of 1.00 mm, duration of 2 h, and temperature within the range of the test machine, specifically, ambient to 280x00B0;C. Other test loads (10 to 1200 N for SRVI-model, 10 to 1400 N for SRVII-model, and 10 to 2000 N for SRVIII-model), frequencies (5 to 500 Hz) and stroke amplitudes (0.1 up to 4.0 mm) can be used, if specified. The precision of this test method is based on the stated parameters and test temperatures of 50 and 80x00B0;C. Average wear scar dimensions on ball and coefficient of friction are determined and reported. Note 18212;Optimol Instruments supplies an upgrade kit to allow SRVI/II-machines to operate with 1600 N, if needed. 1.2 This test method can also be used for determining a fluid lubricant's ability to protect against wear and its coefficient of friction under similar test conditions. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息:ICS:75.100 (Lubricants, industrial oils and related pr CCS:E36 发布:2005 实施

简介: 信息:

ASTM D6425-17 用SRV试验机测量极压(EP)润滑油的摩擦和磨损特性的标准试验方法
简介:
信息:ICS:75.100 CCS发布:2017-10-01 实施

ASTM D6425-2005 用SRV试验机测量极压(EP)润滑油摩擦和磨损特性的标准试验方法
简介:This test method can be used to determine anti-wear properties and coefficient of friction of EP lubricating oils at selected temperatures and loads specified for use in applications in which high-speed vibrational or start-stop motions are present for extended periods of time under initial high Hertzian point contact pressures. It has found application as a screening test for lubricants used in gear or cam/follower systems. Users of this test method should determine whether results correlate with field performance or other applications.1.1 This test method covers an extreme pressure (EP) lubricating oil's coefficient of friction and its ability to protect against wear when subjected to high-frequency, linear oscillation motion. The procedure is identical to that described in DIN 51834.1.2 This test method can also be used to determine the ability of a non-EP lubricating oil to protect against wear and its coefficient of friction under similar test conditions.1.3 The values stated in SI units are to be regarded as the standard. The vlaues given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息:ICS:75.100 (Lubricants, industrial oils and related pr CCS:E34 发布:2005 实施

简介: 信息:

SH/T 0721-2016 润滑脂摩擦磨损性能的测定 高频线性振动试验机(SRV)法
简介:
信息:ICS:75.140 CCS:E42 发布:2016-12-05 实施:2017-05-01

ASTM D3702-94(2004) 使用推力垫圈试验机自润滑接触的材料摩擦磨损率和摩擦系数的标准试验方法
简介:
信息:ICS:19.060 CCS发布:2004-11-01 实施

简介: 信息:

ASTM D5707-16 用高频线性振荡(SRV)试验机测量润滑脂摩擦磨损性能的标准试验方法
简介:
信息:ICS:75.100 CCS发布:2016-10-01 实施

ASTM D2714-94(2003) Falex Block-on-Ring摩擦磨损试验机的标定和操作标准测试方法
简介:
信息:ICS:19.060 CCS发布:2003-11-01 实施

简介: 信息:

ASTM D3702-94(2014) 使用推力垫圈试验机自润滑接触的材料摩擦磨损率和摩擦系数的标准试验方法
简介:
信息:ICS:19.060 CCS发布:2014-05-01 实施

ASTM D5707-98(2003)e1 用高频线性振荡(SRV)试验机测量润滑脂摩擦磨损性能的标准试验方法
简介:
信息:ICS:75.100 CCS发布:2003-08-10 实施

简介: 信息:

ASTM D2714-94(2014) Falex Block-on-Ring摩擦磨损试验机的标定和操作标准测试方法
简介:
信息:ICS:19.060 CCS发布:2014-05-01 实施

ASTM D6425-02 用SRV试验机测量极压(EP)润滑油的摩擦和磨损特性的标准试验方法
简介:
信息:ICS:75.100 CCS发布:2002-12-10 实施

简介: 信息:

ASTM D6425-11 用SRV试验机测量极压(EP)润滑油的摩擦和磨损特性的标准试验方法
简介:
信息:ICS:75.100 CCS发布:2011-12-01 实施

ASTM D6425-2002 用SRV试验机测量EP润滑油摩擦和磨损特性的标准试验方法
简介:1.1 This test method covers an extreme pressure (EP) lubricating oil's coefficient of friction and its ability to protect against wear when subject to high-frequency, linear oscillation motion. The procedure is identical to that described in DIN 51834. 1.2 This test method can also be used to determine the ability of a non-EP lubricating oil to protect against wear and its coefficient of friction under similar test conditions. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息:ICS:75.100 (Lubricants, industrial oils and related pr CCS:E34 发布:2002 实施

简介: 信息:

ASTM D5707-11 用高频线性振荡(SRV)试验机测量润滑脂摩擦磨损性能的标准试验方法
简介:
信息:ICS:75.100 CCS发布:2011-12-01 实施

ASTM D3702-94(1999) 使用推力垫圈试验机自润滑接触的材料摩擦磨损率和摩擦系数的标准试验方法
简介:
信息:ICS:19.060 CCS发布:1999-11-10 实施

简介: 信息:

ASTM D5707-05(2011)e1 用高频线性振荡(SRV)试验机测量润滑脂摩擦磨损性能的标准试验方法
简介:
信息:ICS:75.100 CCS发布:2011-07-01 实施

ASTM D6425-99 用SRV试验机测量极压(EP)润滑油的摩擦和磨损特性的标准试验方法
简介:
信息:ICS:75.100 CCS发布:1999-06-10 实施

简介: 信息:

NB/SH/T 0847-2010 极压润滑油摩擦磨损性能的测定 SRV试验机法
简介:本标准规定了用SRV试验机在高频线性振动的条件下测定极压润滑油的摩擦系数和抗磨损性能的试验方法。本标准也适用于在类似试验条件下测定非极压润滑油的摩擦系数和抗磨损性能。本标准采用国际单位制[SI]单位。本标准的应用可能涉及到某些有危险性的材料、操作和设备,但并未对此有关的所有安全问题都提出建议,用户在使用本标准前有责任制定相应的安全和保护措施,并确定相关规章限制的适用性。
信息:ICS:75.100 CCS:E34 发布:2011-01-09 实施:2011-05-01

ASTM D6425-1999 用SRV试验机测量耐特高压(EP)润滑油摩擦和抗磨损特性的标准试验方法
简介:1.1 This test method covers an extreme pressure (EP) lubricating oil's coefficient of friction and its ability to protect against wear when subject to high-frequency, linear oscillation motion. The procedure is identical to that described in DIN 51834. 1.2 This test method can also be used to determine the ability of a non-EP lubricating oil to protect against wear and its coefficient of friction under similar test conditions. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息:ICS:75.100 (Lubricants, industrial oils and related pr CCS:E34 发布:1999 实施

简介: 信息:

ASTM D6425-2011 用SRV试验机测量极压(EP)润滑油摩擦和磨损特性的标准试验方法
简介:This test method can be used to determine anti-wear properties and coefficient of friction of EP lubricating oils at selected temperatures and loads specified for use in applications in which high-speed vibrational or start-stop motions are present for extended periods of time under initial high Hertzian point contact pressures. It has found application as a screening test for lubricants used in gear or cam/follower systems. Users of this test method should determine whether results correlate with field performance or other applications.1.1 This test method covers an extreme pressure (EP) lubricating oilx0027;s coefficient of friction and its ability to protect against wear when subjected to high-frequency, linear oscillation motion. The procedure is identical to that described in DIN 51834. 1.2 This test method can also be used to determine the ability of a non-EP lubricating oil to protect against wear and its coefficient of friction under similar test conditions. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息:ICS:75.100 (Lubricants, industrial oils and related pr CCS:E34 发布:2011 实施

ASTM D2714-94(1998) Falex Block-on-Ring摩擦磨损试验机的标定和操作标准测试方法
简介:
信息:ICS:19.060 CCS发布:1998-11-10 实施

简介: 信息:

ASTM D5707-2011 润滑脂摩擦磨损性能测量(高频线性振动试验机法)标准试验方法
简介:This test method can be used to determine wear properties and coefficient of friction of lubricating greases at selected temperatures and loads specified for use in applications where high-speed vibrational or start-stop motions are present for extended periods of time under initial high Hertzian point contact pressures. This test method has found application in qualifying lubricating greases used in constant velocity joints of front-wheel-drive automobiles and for lubricating greases used in roller bearings. Users of this test method should determine whether results correlate with field performance or other applications.1.1 This test method covers a procedure for determining a lubricating greasex0027;s coefficient of friction and its ability to protect against wear when subjected to high-frequency, linear-oscillation motion using an SRV test machine at a test load of 200 N, frequency of 50 Hz, stroke amplitude of 1.00 mm, duration of 2 h, and temperature within the range of the test machine, specifically, ambient to 280x00B0;C. Other test loads (10 to 1200 N for SRVI-model, 10 to 1400 N for SRVII-model, and 10 to 2000 N for SRVIII-model), frequencies (5 to 500 Hz) and stroke amplitudes (0.1 up to 4.0 mm) can be used, if specified. The precision of this test method is based on the stated parameters and test temperatures of 50 and 80x00B0;C. Average wear scar dimensions on ball and coefficient of friction are determined and reported. Note 18212;Optimol Instruments supplies an upgrade kit to allow SRVI/II-machines to operate with 1600 N, if needed. 1.2 This test method can also be used for determining a fluid lubricantx0027;s ability to protect against wear and its coefficient of friction under similar test conditions. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息:ICS:75.100 (Lubricants, industrial oils and related pr CCS:E36 发布:2011 实施

ASTM D5707-98 用高频线性振荡(SRV)试验机测量润滑脂摩擦磨损性能的标准试验方法
简介:
信息:ICS:75.100 CCS发布:1998-06-10 实施

简介: 信息:

ASTM D7594-2011 使用高频线性震荡(SRV)试验机测定润滑脂在高赫兹接触压力下的摩擦磨损耐受性的标准试验方法
简介:This test method can be used to determine anti-wear properties and coefficient of friction of greases in order to prevent x201C;frettingx201D; wear under linear oscillation with associated low strokes and high Hertzian contact pressures at selected temperatures and loads specified for use in applications in which induced, high-speed vibrational motions are present for extended periods of time. It has found application as a screening test for grease lubricants used in ball and roller bearings, roller or ball screw (spindle) drives or side shaft systems (Tripode or Rzeppa type) for example, so-called constant velocity (CV) joints. Users of this test method should determine whether results correlate with field performance or other applications.1.1 This test method covers a procedure for determining the lubricating action of greases in order to prevent x201C;frettingx201D; wear under linear oscillation with associated low strokes and high Hertzian contact pressures under high-frequency linear-oscillation motion using the SRV test machine. By performing additional, nonmandatory extreme-pressure tests in accordance with Test Method D5706, the test grease should be shown to be able to withstand a Hertzian contact pressure of at least 2200 MPa without adhesive failure. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息:ICS:75.100 (Lubricants, industrial oils and related pr CCS:E36 发布:2011 实施

DIN 1496-1996 滑动轴承.SLPG试验机精密工程轴承的摩擦和磨损测试
简介:The document specifies the methods of testing and acceptance test of metallic sintered bearings.
信息:ICS:21.100.10 CCS:J12 发布:1996-03 实施

简介: 信息:

ASTM D6425-05(2010)e1 用SRV试验机测量极压(EP)润滑油的摩擦和磨损特性的标准试验方法
简介:
信息:ICS:75.100 CCS发布:2010-05-01 实施

ASTM D2714-1994(2014) 环块摩擦试验机和磨损试验机校准和操作的标准试验方法
简介:4.1x00a0;This test method is used for the calibration of a block-on-ring testing machine by measuring the friction and wear properties of a calibration fluid under the prescribed test conditions. 4.2x00a0;The user of this test method should determine to his or her own satisfaction whether results of this test procedure correlate with field performance or other bench test machines. If the test conditions are changed, wear values can change and relative ratings of fluids can be different. 1.1x00a0;This test method covers the calibration and operation of a block-on-ring friction and wear testing machine. 1.2x00a0;The values in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息:ICS:19.060 (Mechanical testing) CCS发布:1994 实施

简介: 信息:

ASTM D7594-2010 使用高频线性震荡(SRV)试验机测定润滑脂在高赫兹接触压力下的摩擦磨损耐受性的标准试验方法
简介:1.1 This test method covers a procedure for determining the lubricating action of greases in order to prevent x201C;frettingx201D; wear under linear oscillation with associated low strokes and high Hertzian contact pressures under high-frequency linear-oscillation motion using the SRV test machine. By performing additional, nonmandatory extreme-pressure tests in accordance with Test Method D5706, the test grease should be shown to be able to withstand a Hertzian contact pressure of at least 2200 MPa without adhesive failure. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息:ICS:75.100 CCS:E36 发布:2010 实施

ASTM D8316-20a 用SRV试验机测量具有滚子盘几何形状的极压(EP)润滑油的摩擦和磨损性能的标准试验方法
简介:
信息:ICS:75.100 CCS:/ 发布:0000-00-00 实施:0000-00-00

简介: 信息:

ASTM D3702-94(2009) 使用推力垫圈试验机自润滑接触的材料摩擦磨损率和摩擦系数的标准试验方法
简介:
信息:ICS:19.060 CCS发布:2009-10-01 实施

ASTM D5707-19 用高频线性振荡(SRV)试验机测量润滑脂摩擦磨损性能的标准试验方法
简介:
信息:ICS:75.100 CCS:/ 发布:0000-00-00 实施:0000-00-00

简介: 信息:

我们的实力

我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力

部分实验仪器

实验仪器 实验仪器 实验仪器 实验仪器

合作客户

我们的实力

注意:因业务调整,暂不接受个人委托测试望见谅。