热脱附仪检测标准热脱附仪-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

热脱附仪相关标准参考信息

GB/T 42162-2022 生橡胶毛细管气相色谱测定残留单体和其他挥发性低分子量化合物热脱附（动态顶空）法
简介：
信息：ICS：83.040.10 CCS：G35 发布：2022-12-30 实施：2023-04-01

ASTM D6196-15 监测空气中挥发性有机化学物质用吸附剂、取样参数和热脱附分析条件的选择
简介：
信息：ICS：13.040.20 CCS：发布：2015-11-01 实施：

GOST R ISO 16017-2-2007 室内,环境,工作场所空气.挥发性有机化合物的抽样与分析,通过吸附管/热脱附/气相色谱分析进行.第2部分:散布抽样
简介：
信息：ICS：13.040.01 CCS：发布：2007 实施：2008-09-01

GB/T 39560.8-2021 电子电气产品中某些物质的测定第8部分：气相色谱-质谱法（GC-MS）与配有热裂解/热脱附的气相色谱-质谱法（Py/TD-GC-MS）测定聚合物中的邻苯二甲酸酯
简介：GB/T 39560的本部分描述了两种标准方法和两种参考方法，用于测定在电子电气产品聚合物中的邻苯二甲酸二异丁酯（DIBP）、邻苯二甲酸二正丁酯（DBP）、邻苯二甲酸丁苄酯（BBP）、邻苯二甲酸二异辛酯（DEHP）、邻苯二甲酸二正辛酯（DNOP）、邻苯二甲酸二异壬酯（DINP）以及邻苯二甲酸二异癸酯（DIDP）。本部分的标准方法是气相色谱-质谱（GC-MS）法与配有热裂解/热脱附的气相色谱-质谱（Py/TD-GC-MS）法。 GC-MS法是定量测定DIBP、DBP、BBP、DEHP、DNOP、DINP 和DIDP 的标准方法，测定范围从50 mg/kg到2 000 mg/kg。配有热裂解/热脱附的气相色谱-质谱法（Py/TD-GC-MS），适用于筛选和半定量分析电子电气产品聚合物材料中的DIBP、DBP、BBP、DEHP、DNOP、DINP和DIDP，测定范围为100 mg/kg到2 000 mg/kg。离子附着质谱法（IAMS）适用于DIBP、DBP、BBP、DEHP、DNOP、DINP以及DIDP的筛选和半定量分析，详见附录A。由于质谱峰分辨率的限制，用IAMS法测定DBP和 DIBP、DEHP和DNOP的方法尚未确定。液相色谱-质谱法（LC-MS）仅限于BBP、DEHP、DNOP、DINP 和DIDP的测定，详见附录B。由于质谱峰分辨率的限制，用LC-MS技术测定DBP和DIBP的方法尚未确定。附录C中提供的流程图，描述了如何使用两种标准方法：Py/TD-GC-MS和GC-MS，及如何使用两种参考方法：直接进样（DIP）-离子附着质谱（IAMS）和液相色谱-质谱（LC-MS）。这四种测试方法已经通过测试邻苯二甲酸酯含量约450 mg/kg至30 000 mg/kg的聚乙烯（PE）和聚氯乙烯（PVC）材料进行评估。本部分所述的四种方法对其他聚合物类型、邻苯二甲酸类化合物或上述规定浓度范围之外的使用未做具体评估。
信息：ICS：31.020 CCS：L10 发布：2021-10-11 实施：2022-05-01

ASTM D6196-2015 用于监测空气中挥发性有机化合物的选择吸附剂, 采样参数和热脱附分析条件的标准实施规程
简介：5.1x00a0;This practice is recommended for use in measuring the concentration of VOCs in ambient, indoor, and workplace atmospheres. It may also be used for measuring emissions from materials in small or full scale environmental chambers for material emission testing or human exposure assessment. 5.2x00a0;Such measurements in ambient air are of importance because of the known role of VOCs as ozone precursors, and in some cases (for example, benzene), as toxic pollutants in their own right. 5.3x00a0;Such measurements in indoor air are of importance because of the association of VOCs with air quality problems in indoor environments, particularly in relation to sick building syndrome and emissions from building materials. Many volatile organic compounds have the potential to contribute to air quality problems in indoor environments and in some cases toxic VOCs may be present at such elevated concentrations in home or workplace atmospheres as to prompt serious concerns over human exposure and adverse health effects (5). 5.4x00a0;Such measurements in workplace air are of importance because of the known toxic effects of many such compounds. Note 1:x00a0;While workplace air monitoring has traditionally been carried out using disposable sorbent tubes, typically packed with charcoal and extracted using chemical desorption (solvent extraction) prior to GC analysis x2013; for example following NIOSH and OSHA reference methods x2013; routine thermal desorption (TD) technology was originally developed specifically for this application area. TD overcomes the inherent analyte dilution limitation of solvent extraction improving method detection limits by 2 or 3 orders of magnitude and making methods easier to automate. Relevant international standard methods include ISO 16017-1 and ISO 16017-2. For a detailed history of the development of analytical thermal desorption and a comparison with solvent extraction methods see Ref (6). 5.5x00a0;In order to protect the environment as a whole and human health in particular, it is often necessary to take measurements of air quality and assess them in relation to mandatory requirements. 5.6x00a0;The choices of sorbents, sampling method, and analytical methodology affect the efficiency of sorption, recovery, and quantification of individual VOCs. This practice is potentially effective for any GC-compatible vapor-phase organic compound found in air, over a wide range of volatilities and concentration levels. However, it is the responsibility of the user to ensure that the sampling, recovery, analysis, and overall quality control of each measurement are within acceptable limits for each specific VOC of interest. Guidance for this evaluation is part of the scope of this practice. 1.1x00a0;This practice is intended to assist in the selection of sorbents and procedures for the sampling and analysis of ambient (
信息：ICS：13.040.20 CCS：发布：2015 实施：

GOST R ISO 16017-1-2007 室内,环境,工作场所空气.挥发性有机化合物的抽样与分析,通过吸附管/热脱附/气相色谱分析进行.第1部分:摇动抽样
简介：
信息：ICS：13.040.01 CCS：发布：2007 实施：2008-09-01

GB/T 39695-2020 橡胶烟气中挥发性成分的鉴定热脱附-气相色谱-质谱法
简介：本标准规定了一种采用2,6-二苯基苯酚聚合树脂固体吸附剂捕集橡胶烟气中的挥发性成分，并采用热脱附-气相色谱-质谱法（TD-GC-MS）定性分析挥发性成分的方法。本标准适用于橡胶加工车间和储存环境中橡胶排放物的筛查。
信息：ICS：83.060 CCS：G40 发布：2020-12-14 实施：2021-11-01

HJ734-2014 固定污染源废气挥发性有机物的测定固相吸附-热脱附气相色谱-质谱法
简介：
信息：ICS：01.040.13 CCS：z 发布：2014-12-31 实施：2015-02-01

GB/T 33871-2017 墨粉中总挥发性有机化合物（TVOC）、苯和苯乙烯的测定热脱附-气相色谱法
简介：本标准规定了采用热脱附-气相色谱法测定墨粉种TVOC、苯和苯乙烯含量的方法。本方法适用于墨粉中TVOC、苯和苯乙烯的测定。
信息：ICS：37.100 CCS：G81 发布：2017-07-12 实施：2018-02-01

HJ 734-2014 固定污染源废气挥发性有机物的测定固相吸附-热脱附/气相色谱-质谱法
简介：本标准规定了固定污染源废气中24种挥发性有机物测定的固相吸附-热脱附/气相色谱-质谱法。本标准适用于固定污染源废气中24种挥发性有机物的测定,24种挥发性有机物包括:丙酮、异丙醇、正己烷、乙酸乙酯、苯、六甲基二硅氧烷、3-戊酮、正庚烷、甲苯、环戊酮、乳酸乙酯、乙酸丁酯、丙二醇单甲醚乙酸酯、乙苯、对/间二甲苯、2-庚酮、苯乙烯、邻二甲苯、苯甲醚、苯甲醛、1-癸烯、2-壬酮、1-十二烯。其他挥发性有机物经过验证后也可使用本方法。当采样体积为300 ml时,本标准的方法检出限为0.001~0.01 mg/m,测定下限为0.004~0.04 mg/m。详见附录A。
信息：ICS：13.040 CCS：Z60 发布：2014-12-31 实施：2015-02-01

ISO 15680:2003 水质与灰分；使用吹扫捕集器和热脱附气相色谱法测定大量单环芳烃、萘和几种氯化化合物
简介：
信息：ICS：13.060.50 CCS：发布：2003-11-04 实施：

T/GAIA 014-2022 工作场所空气中醇类化合物的测定热脱附/气相色谱-质谱法
简介：本文件规定了采用热脱附/气相色谱-质谱法测定工作场所空气中醇类化合物的方法。本文件适用于工作场所空气中蒸气态醇类化合物异丙醇、叔丁醇、正丙醇、仲丁醇、异丁醇、2-甲氧基乙醇、正丁醇、氯乙醇、2-乙氧基乙醇和异戊醇浓度的检测。
信息：ICS：13.040.30 CCS：M745 发布：2022-11-01 实施：2022-11-08

BS PD CEN/TS 13649-2014 固定源排放. 专用气体有机化合物质量浓度的测定. 溶剂萃取或者热脱附之前的吸附采样方法
简介：
信息：ICS：13.040.40 CCS：Z60 发布：2014-12-31 实施：2014-12-31

ASTM D6196-03 空气中挥发性有机化合物的取样和热脱附分析程序中吸收剂的选择
简介：
信息：ICS：13.040.20 CCS：发布：2003-05-10 实施：

IEC 62321-3-3-2021 电工产品中某些物质的测定.第3-3部分:筛选.使用热解/热脱附附件（Py/TD？GC？MS）通过气相色谱-质谱法测定聚合物中的多溴联苯、多溴二苯醚和邻苯二甲酸酯
简介：
信息：ICS：43.040.10 CCS：发布：2021-09-14 实施：

HJ 734-2014 固定污染源废气挥发性有机物的测定固相吸附-热脱附／气相色谱-质谱法
简介：
信息：ICS： CCS：发布：实施：2015-02-01

IEC 62321-3-3:2021 电工产品中某些物质的测定.第3-3部分:筛选.使用热解/热脱附附件（Py/TD？GC？MS）通过气相色谱-质谱法测定聚合物中的多溴联苯、多溴二苯醚和邻苯二甲酸酯
简介：
信息：ICS：43.040.10 CCS：发布：2021-09-14 实施：

PD CEN/TS 13649-2014 固定源排放-单个气态有机化合物的测定.溶剂萃取法或热脱附基础上的吸附采样方法
简介：This Technical Specification specifies procedures for the sampling, preparation and analysis of individual volatile organic compounds (VOCs) in waste gas, such as those arising from solvent using processes. Sampling occurs by adsorption on sorbents, preparation by solvent extraction or thermodesorption and analysis by gas chromatography. Examples of individual VOC are given in relevant industry sector BAT Reference documents (BREFs). The results obtained are expressed as the mass concentration (mg/m 3 ) of the individual gaseous organic compounds. This document is suitable for measuring individual VOCs whose ranges vary depending on compound and test method, refer to Annex B and C. This Technical Specification may be used to meet the monitoring requirements of the Industrial Emission Directive (IED) and associated supporting documents. This Technical Specification is not suitable for measuring total organic carbon (TOC). For the measurement of the mass concentration of total organic carbon then EN 12619 is applicable.
信息：ICS：13.040.40 CCS：Z11 发布：2014-12 实施：

简介： 信息：

HJ 1165-2021 污染土壤修复工程技术规范原位热脱附
简介：
信息：ICS：01.040.16 CCS：z 发布：2021-04-30 实施：2021-04-30

ASTM D7823-14 聚对苯二甲酸乙二醇酯（Poly&40）中低水平调节邻苯二甲酸酯测定的标准试验方法；氯乙烯&41；热脱附塑料&mdash；气相色谱/质谱法
简介：
信息：ICS：83.040.30 CCS：发布：2014-08-01 实施：

简介： 信息：

HJ 1164-2021 污染土壤修复工程技术规范异位热脱附
简介：
信息：ICS：01.040.15 CCS：z 发布：2021-04-30 实施：2021-04-30

ASTM D7823-2014 使用热脱附-气相色谱/质谱法测定聚氯乙烯塑料中低水平调节的邻苯二甲酸盐的标准试验方法
简介：5.1x00a0;Identification and quantitation of phthalates: DBP, BBP, DEHP, DNOP, DINP, and DIDP are required for regulated articles. Regulations include: EUx2014;Directive 2005/84/EC, USx2014;Consumer Product Safety Improvement Act of 2008x2014;section 108, Japanx2014;Health, Labor and Welfare Ministry guideline No.336 (2010). This test method provides a procedure to identify and quantify regulated phthalates in PVC. 5.2x00a0;Other techniques successfully used to separate and identify phthalates in PVC include GC/MS, HPLC/UV, HPLC/MS, FTIR, and GC/FID (flame ionization detector). 1.1x00a0;This test method provides a procedure to identify and quantify six phthalates by thermal desorption (TD) gas chromatography (GC) mass spectrometry (MS). The phthalates are BBP, DBP, DEHP, DNOP, DINP and DIDP. Note 1:x00a0;The method can be extended to include other phthalates. 1.2x00a0;Within the context of this method, x201c;low levelx201d; is defined as 1000 ppm. 1.3x00a0;The values in SI units are to be regarded as standard. 1.4x00a0;This test method includes references, notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in the tables and figures) shall not be considered as requirements of this method. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 2:x00a0;There is no known ISO equivalent to this test method.
信息：ICS：83.040.30 (Auxiliary materials and additives for p CCS：发布：2014 实施：

简介： 信息：

T/NDAS 26-2020 原位热脱附技术要求
简介：1.范围本文件规定了原位热脱附技术的术语和定义、技术要求、试验方法、检验规则、标牌、标志、包装、运输和储存。本文件适用于土壤有机污染物热脱附处理设备的设计。化学农药污染、焦化类有机污染物污染及石油类有机污染物污染热脱附处理设备设计，均可参考本文件。2.术语和定义本文件规定了“土壤有机污染”、“热脱附处理技术”、“热脱附处理装置”、“两段式回转窑”、“旋风除尘装置”、“二燃室”、“换热器”、“半干法脱酸塔”、“有机污染物去除效率”的定义。3.技术要求本文件规定了原位热脱附技术的基本要求、材料要求、加工要求、技术性能要求、电气和控制要求、消防要求。4.试验方法本文件规定了原位热脱附技术各项要求的试验方法。5.检验规则本文件规定了原位热脱附技术的出厂检验和型式检验的项目和要求。6.包装与标牌本文件规定了原位热脱附技术的包装与标牌。
信息：ICS：71.120.01 CCS：C359 发布：2020-12-29 实施：2020-12-29

ASTM D7823-13 用热脱附法测定聚氯乙烯塑料中低含量、规定邻苯二甲酸酯的标准试验方法&mdash；气相色谱/质谱
简介：
信息：ICS：83.040.30 CCS：发布：2013-04-01 实施：

简介： 信息：

T/JMZJXH 003-2020 燃香烟雾中16种多环芳烃含量的测定 —热脱附/气相色谱-质谱法
简介：规定了采用热脱附/气相色谱-质谱法测定燃香烟雾中16种多环芳烃的含量
信息：ICS：75.160.10 CCS：C268 发布：2020-07-29 实施：2020-07-29

HJ 644－2013 环境空气挥发性有机物的测定吸附管采样-热脱附/气相色谱-质谱法
简介：
信息：ICS：01.040.13 CCS：z 发布：2013-02-17 实施：2013-07-01

简介： 信息：

DB21/T 3071-2018 环境空气挥发性有机物的测定被动采样/热脱附/气相色谱-质谱法
简介：
信息：ICS：13.040.20 CCS：Z 15 发布：2018-12-25 实施：2019-01-25

HJ 644-2013 环境空气.挥发性有机物的测定.吸附管采样-热脱附/气相色谱-质谱法
简介：试验中所使用标准溶液为易挥发的有毒化合物，其溶液配制过程应在通风厨内进行操作，操作人员应佩戴防护器具。范围：本标准规定了测定环境空气中挥发性有机物（VOCs）的吸附管采样-热脱附/气相色谱-质谱法。本标准适用于环境空气中35种挥发性有机物的测定。若通过验证本标准也可适用于其他非极性或弱极性挥发性有机物的测定。当采样体积为2L时，本标准的方法检出限为0.3～1.0μg/m³，测定下限为1.2～4.0μg/m³。
信息：ICS：13.040 CCS：Z15 发布：2013-02-17 实施：2013-07-01

简介： 信息：

DIN EN 62321-8-2017 电工技术产品中某些物质的测定. 第8部分: 采用气相色谱质谱联用仪(GC-MS), 配有热裂解/热脱附附件的气相色谱质谱联用仪(Py/TD-GC-MS)测定聚合物中的邻苯二甲酸酯(IEC 62321-8-2017);德文版本EN 62321-8-2017
简介：The purpose of the IEC 62321 series is to provide test methods that will allow the electrotechnical industry to determine the levels of certain substances of concern in electrotechnical products on a consistent global basis. This part 8 of the series provides test methods to determine the levels of di-isobutyl phthalate(DIBP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DNOP), di-isononyl phthalate (DINP) and di-iso-decyl phthalate (DIDP).
信息：ICS： CCS：K04 发布：2017-12-01 实施：2017-12-01

KS M ISO 17052-2012(2017) 生胶.用毛细管气相色谱法测定残留单体和其他挥发性低分子量化合物.热脱附（动态顶空）法
简介：
信息：ICS：83.040.10 CCS：发布：2012-12-10 实施：

简介： 信息：

SN/T 4934-2017 汽车用纺织品有机挥发物的测定热脱附-气相色谱质谱法
简介：
信息：ICS：59.080 CCS：W04 发布：2017-11-07 实施：2018-06-01

ASTM D7339-2012 用特定吸着管和热脱附/气相色谱法测定地毯排出的挥发性有机化合物的标准试验方法
简介：5. Significance and UseTop Bottom 5.1 Manufacturers of carpet need to monitor emissions of VOCs to assess the environmental impact of their products indoors. These results are also used to demonstrate compliance with VOC emission limits for individual VOCs. 5.2 These data are also used to understand which VOCs are emitted from a product or material and to measure the magnitude of those emissions. 5.3 Emission data may be used to compare different lots of carpet of the same materials of construction, or carpets composed of different materials of construction, in order to develop products with lower emissions and lower potential environmental impact. 5.4 This test method should be used in conjunction with practices/guidelines for emissions testing such as Guide D5116, Practice D7143, Practice D7706, ISO8201;16000-9, and ISO8201;16000-10. These detail how to select and prepare samples and how and when to carry out emissions tests such that the concentration and profile of vapors in the exhaust air of the emission chamber/cell are representative of the product under test. This standard method covers the sampling and analysis of volatile organic compounds in the exhaust gas from the chamber/cell using thermal desorption???compatible sorbent tubes and will provide the necessary analytical consistency to ensure that reproducible data is obtained for the analysis of identical vapor samples by different laboratories. 1.1 This test method describes an analytical procedure for identifying and quantifying the masses of individual volatile organic compounds (individual VOCs or IVOCs) that are emitted into a flow of air from carpet specimens and collected on sorbent sampling tubes during emissions testing. 1.2 This test method will be used in conjunction with a standard practice for sampling and preparing carpet specimens for emissions testing. If a specific chamber practice is not available for the carpet specimens, this standard test method should be used in conjunction with approved standard practices for emissions testing and sample preparation. 1.3 When used in conjunction with standard practices for carpet specimen preparation and collection of vapor-phase emissions , this test method will provide a standardized means of determining the levels of IVOC in the exhaust stream of the emissions test chamber/cell. If this test method is used with a reliable practice for emissions testing, these IVOC levels can be used to determine the emission rate from a unit quantity (usually surface area) of the sample material under test. 1.4 VOCs in the exhaust stream of an emiss......
信息：ICS：59.080.60 (Textile floor coverings) CCS：发布：2012 实施：

简介： 信息：

IEC 62321-8-2017 电工技术产品中某些物质的测定. 第8部分: 采用气相色谱质谱联用仪(GC-MS), 配有热裂解/热脱附附件的气相色谱质谱联用仪(Py/TD-GC-MS)测定聚合物中的邻苯二甲酸酯
简介：This part of IEC 62321 specifies two normative and two informative techniques for the determination of di-isobutyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DNOP), di-isononyl phthalate (DINP) and di-iso-decyl phthalate (DIDP) in polymers of electrotechnical products. Gas chromatography-mass spectrometry (GC-MS) and gas chromatography-mass spectrometry (Py/TD-GC-MS) techniques are described in the normative part of this document. The GC-MS method is considered the referee technique for the quantitative determination of DIBP, DBP, BBP, DEHP, DNOP, DINP and DIDP in the range of 50 mg/kg to 2000 mg/kg. The GC-MS coupled with a pyrolyzer/thermal desorption (TD) accessory is suitable for screening and semi-quantitative analysis of DIBP, DBP, BBP, DEHP, DNOP, DINP, and DIDP in polymers that are used as parts of the electrotechnical products in the range of 100 mg/kg to 2000 mg/kg. The IAMS technique is suitable for screening and semi-quantitative analysis of DIBP, DBP, BBP, DEHP, DNOP, DINP, and DIDP. Determination of DBP and DIBP, DEHP and DNOP by IAMS has not been established due to peak and mass spectral resolution limitations. The LC-MS technique is limited to the determination of of BBP, DEHP, DNOP, DINP, and DIDP. Determination of DBP and DIBP by LC-MS has not been established due to peak and mass spectral resolution limitations. A flow chart depicting how the normative Py/TD-GC-MS and GC-MS methods and informative methods using ion attachment mass spectrometry (IAMS) coupled with direct injection probe (DIP) and liquid chromatography-mass spectrometry (LC-MS) can be used are provided in annexes of this document. These four test methods have been evaluated by the test of PE (polyethylene) and PVC (polyvinyl chloride) materials containing individual phthalates between ~450 mg/kg to 30000 mg/kg as depicted in the normative and informative parts of this document. The use of the four methods described in this document for other polymer types, phthalate compounds or concentration ranges other than those specified above has not been specifically evaluated.
信息：ICS：31.020;71.040.50 CCS：K04 发布：2017-03 实施：

HJ 583-2010 环境空气　苯系物的测定　固体吸附/热脱附-气相色谱法
简介：本标准规定了测定空气中苯系物的固体吸附/热脱附-气相色谱法。本标准适用于环境空气及室内空气中苯、甲苯、乙苯、邻二甲苯、间二甲苯、对二甲苯、异丙苯和苯乙烯的测定。本标准也适用于常温下低浓度废气中苯系物的测定。
信息：ICS：13.040 CCS：Z15 发布：2010-09-20 实施：2010-12-01

简介： 信息：

HJ 583－2010 环境空气苯系物的测定　固体吸附/热脱附-气相色谱法
简介：
信息：ICS：01.040.13 CCS：z 发布：2010-09-20 实施：2010-12-01

简介： 信息：

ASTM D7823-16 用热脱附法测定聚氯乙烯塑料中低含量、规定邻苯二甲酸酯的标准试验方法&x2014；气相色谱/质谱法
简介：
信息：ICS：83.040.30 CCS：发布：2016-05-01 实施：

KS I ISO 15680-2010(2015) 水质－用吹扫捕集和热脱附气相色谱法测定许多单环芳烃、萘和几种氯化化合物
简介：
信息：ICS：13.060.50 CCS：发布：2010-08-12 实施：

简介： 信息：

EN ISO 15009-2016 对挥发性芳香烃含量的土壤质量的气相色谱测定,卤代烃的净化和热脱附陷阱法萘和挥发性(ISO 15009:2016)
简介：Diese Internationale Norm legt ein quantitatives gaschromatographisches Verfahren zur Bestimmung von flüchtigen aromatischen Kohlenwasserstoffen, Naphthalin und flüchtigen Halogenkohlenwasserstoffen im Boden fest. Diese Internationale Norm ist auf alle Bodenarten anwendbar. ANMERKUNG Im Fall von ungesättigten Torfböden kann es zur Absorption des Lösungsmittels kommen. Die untere Bestimmungsgrenze ist abhängig von der verwendeten Prüfeinrichtung und der Qualität des Methanols, mit dem die Bodenprobe extrahiert wird. Unter den in dieser Internationalen Norm festgelegten Bedingungen gelten folgende Bestimmungsgrenzen (bezogen auf Trockensubstanz): Bei Anwendung eines Gaschromatographen mit Flammenionisationsdetektor (GC-FID) liegt die typische Bestimmungsgrenze:- für flüchtige aromatische Kohlenwasserstoffe: 0,1 mg/kg. Bei Anwendung eines Gaschromatographen mit Elektronen-Einfang-Detektor (GC-ECD) liegt die typische Bestimmungsgrenze; - für flüchtige Halogenkohlenwasserstoffe: 0,01 mg/kg. Niedrigere Bestimmungsgrenzen für einige Verbindungen können durch Anwendung der Massenspektrometrie (MS) mit selektiver Ionendetektion erreicht werden.
信息：ICS：13.080.10 CCS：B11 发布：2016-03 实施：

ASTM D6196-03(2009) 空气中挥发性有机化合物的取样和热脱附分析程序中吸收剂的选择
简介：
信息：ICS：13.040.20 CCS：发布：2009-03-01 实施：

简介： 信息：

ASTM D7823-16 adjunct 使用热脱附-气相色谱/质谱法测定聚氯乙烯塑料中低水平调节的邻苯二甲酸盐的标准试验方法
简介：
信息：ICS： CCS：发布：2016-01-01 实施：2016-01-01

ISO 17052:2007 生胶和中灰；毛细管气相色谱法测定残留单体和其他挥发性低分子化合物——热脱附（动态顶空）法
简介：
信息：ICS：83.040.10 CCS：发布：2007-07-09 实施：

简介： 信息：

ASTM D7823-2016 使用热脱附-气相色谱/质谱法测定聚氯乙烯塑料中低水平调节的邻苯二甲酸盐的标准试验方法
简介：5.1x00a0;Identification and quantitation of phthalates: DBP, BBP, DEHP, DNOP, DINP, and DIDP are required for regulated articles. Regulations include: EUx2014;Directive 2005/84/EC, USx2014;Consumer Product Safety Improvement Act of 2008x2014;section 108, Japanx2014;Health, Labor and Welfare Ministry guideline No.336 (2010). This test method provides a procedure to identify and quantify regulated phthalates in PVC. 5.2x00a0;Other techniques successfully used to separate and identify phthalates in PVC include GC/MS, HPLC/UV, HPLC/MS, FTIR, and GC/FID (flame ionization detector). 1.1x00a0;This test method provides a procedure to identify and quantify six phthalates by thermal desorption (TD) gas chromatography (GC) mass spectrometry (MS). The phthalates are BBP, DBP, DEHP, DNOP, DINP and DIDP. Note 1:x00a0;The method can be extended to include other phthalates. 1.2x00a0;Within the context of this method, x201c;low levelx201d; is defined as 1000 ppm. 1.3x00a0;The values in SI units are to be regarded as standard. 1.4x00a0;This test method includes references, notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in the tables and figures) shall not be considered as requirements of this method. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 2:x00a0;There is no known ISO equivalent to this standard.
信息：ICS：83.040.30 CCS：发布：2016 实施：