生锈等级检测标准

发布时间：2023-02-15 01:27:01 • 阅读量： • 来源：中析研究所

生锈等级检测标准相关信息

GB/T 30789.3-2014 色漆和清漆涂层老化的评价缺陷的数量和大小以及外观均匀变化程度的标识第3部分:生锈等级的评定
简介：GB/T 30789的本部分给出了通过与标准图片比较评定生锈等级的方法。本部分给出的标准图片显示了涂漆钢材表面穿透涂层的锈蚀和可观察到的涂层下锈蚀的综合破坏等级。ISO 4628-1定义了关于涂层老化引起的缺陷的数量和大小以及外观均匀变化程度评定体系,并概述了评定体系的总则。本评定体系适用于人工加速老化和天然曝晒引起的缺陷和均匀变化,如颜色变化,例如:黄变。
信息：ICS：87.040 CCS：G50 发布：2014-07-08 实施：2014-12-01

DIN EN ISO 4628-3-2016 色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第3部分:生锈等级的评定(ISO 4628-3-2016).德文版本EN ISO 4628-3-2016
简介：
信息：ICS：87.040 CCS：G50 发布：2016-07 实施：

BS EN ISO 4628-3-2016 涂料和清漆.漆膜降解的评定.缺陷的量值和大小以及外观均匀变化强度的规定.生锈等级的评定
简介：
信息：ICS：87.040 CCS：G50 发布：2016-02-29 实施：2016-02-29

KS M ISO 4628-3-2013 涂料和清漆.漆膜降解的评定.缺陷量值、大小和外观均匀改变程度的规定.第3部分:生锈等级的评定
简介：이 표준은 표준 사진과 비교해 도막의 녹 등급을 평가하는 방법에 대하여 규정한다.이 표준에 제공된 표준 사진은 도막을 관통해 파괴되고 도막 밑층에 확인되는 녹의 상태를 통해 다양한 등급으로 노화된 도장 철강 표면을 보여준다.KS M ISO 4628-1은 결함의 양과 크기 및 겉모양의 변화 정도를 표시하는 데 사용하는 체계와 이런표시 체계의 일반 원리에 대해서 규정한다. 이 표시 체계는 특히 노화와 내후성으로 인한 결함 및황변과 같이 색상 변화를 의미하는 균일한 변화를 표시하는 데 사용한다.
信息：ICS：87.040 CCS：G50 发布：2013-12-30 实施：2013/12/30

KS M ISO 4628-3-2008 涂料和清漆.漆膜降解的评定.缺陷量值、大小和外观均匀改变程度的规定.第3部分:生锈等级的评定
简介：이 표준은 도료, 바니시 및 이와 관련된 제품들의 녹 등급 평가 방법에 대하여 규정한다.
信息：ICS：87.04 CCS：G50 发布：2008-09-30 实施：2008-09-30

JIS K5600-8-3-2008 涂料的测试方法.第8部分:涂层降解的评估.第3节:生锈等级的评定
简介：この規格は，塗膜の“さび”の程度を，基準図版による等級見本と比較し，評価して，等級付けをする方法について規定する。この規格で規定する基準図版は，塗膜を貫通したさび，及び明らかな塗膜下からのさびとの組合せによって，種々の等級に劣化させた塗装鋼板面の状態を示す。
信息：ICS：87.040 CCS：G50 发布：2008-02-20 实施：2008-02-20

EN ISO 8501-1-2007 制备钢基板之前涂料及相关产品的应用,视觉评估表面清洁.第1部分:生锈的成绩和准备等级的裸钢基体和钢后整体移除之前
简介：
信息：ICS：25.220.10 CCS：发布：2007-01-01 实施：

NF T30-140-3-2004 色漆和清漆.漆膜降解的评价.缺陷量值、大小以及外观均匀变化程度的规定.第3部分:生锈等级的评定
简介：
信息：ICS：87.040 CCS：G50 发布：2004-05-01 实施：2004-05-05

DIN EN ISO 4628-3-2004 色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第3部分:生锈等级的评定
简介：The document specifies a method for assessing the degree of rusting of coatings by comparison with pictorial standards. The pictorial standards provided in this part of ISO 4628 show coated steel surfaces which have deteriorated to different degrees by a combination of rust broken through the coating and visible underrust.
信息：ICS：87.040 CCS：G50 发布：2004-01 实施：

BS EN ISO 4628-3-2003 涂料和清漆.漆膜降解的评定.缺陷的量值和大小以及外观均匀变化强度的规定.生锈等级的评定
简介：This part of ISO 4628 describes a method for assessing the degree of rusting of coatings by comparison with pictorial standards. The pictorial standards provided in this part of ISO 4628 show coated steel surfaces which have deteriorated to different degrees by a combination of rust broken through the coating and visible underrust. NOTE 1 The pictorial standards have been selected from the "European rust scale" published by the European Confederation of Paint, Printing Ink and Artists' Colours Manufacturers' Associations (CEPE), Brussels. The correlation between the ISO scale and the "European rust scale" is given in Annex B, Table B.1. NOTE 2 The correlation between the ISO scale and the rating system of ASTM D610, Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces, is given in Annex B, Table B.2. NOTE 3 The rust formation on uncoated steel surfaces is designated in accordance with ISO 8501-1, Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (rust grades A, B, C and D). ISO 4628-1 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
信息：ICS：87.040 CCS：G50 发布：2003-09-24 实施：2003-09-24

EN ISO 4628-3-2003 色漆和清漆.漆膜降解的评定.缺陷的量值和大小以及外观均匀变化强度的规定.第3部分:生锈等级的评定 ISO 4628-3-2003
简介：
信息：ICS：87.040 CCS：发布：2003-09-24 实施：

ISO 4628-3-2003 色漆和清漆.漆膜降解的评定.缺陷量值、大小和外观均匀改变程度的规定.第3部分:生锈等级的评定
简介：This part of ISO 4628 describes a method for assessing the degree of rusting of coatings by comparison with pictorial standards.The pictorial standards provided in this part of ISO 4628 show coated steel surfaces which have deteriorated to different degrees by a combination of rust broken through the coating and visible underrust.NOTE 1 The pictorial standards have been selected from the "European rust scale" published by the European Confederation of Paint, Printing Ink and Artists' Colours Manufacturers' Associations (CEPE), Brussels. The correlation between the ISO scale and the "European rust scale" is given in Annex B, Table B.1.NOTE 2 The correlation between the ISO scale and the rating system of ASTM D610, Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces, is given in Annex B, Table B.2.NOTE 3 The rust formation on uncoated steel surfaces is designated in accordance with ISO 8501-1, Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (rust grades A, B, C and D).ISO 4628-1 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
信息：ICS：87.040 CCS：G50 发布：2003-09 实施：

ISO 4628-3-1982 色漆和清漆漆膜降解的评定一般性缺陷程度、量值和大小的规定第3部分:生锈等级的规定
简介：
信息：ICS：87.040 CCS：G50 发布：1982-05 实施：

JUS C.T7.302-1977 防腐漆的生锈等级表
简介：
信息：ICS： CCS：发布：1977-01-01 实施：

DIN EN ISO 4628-3-2016(E) 色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第3部分:生锈等级的评定(ISO 4628-3-2016).德文版本EN ISO 4628-3-2016
简介：
信息：ICS：87.040 CCS：G50 发布：0000-00-00 实施：0000-00-00