储存稳定性检测标准储存稳定性检测标准-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

储存稳定性检测标准相关信息

ISO 7170:2021 家具.储存装置.强度耐久性和稳定性测定的试验方法
简介：
信息：ICS：97.140 CCS：发布：2021-09-20 实施：

DIN EN 16122-2012 住宅用和非住宅用储存设备.强度,耐久性和稳定性测定试验方法.德文版本EN 16122-2012
简介：
信息：ICS：97.140 CCS：Y80 发布：2012-10-01 实施：2012-10-01

ASTM D6654-2005(2010) 机械泵分配器基本储存稳定性的标准试验方法
简介：Determining the storage of a mechanical pump dispenser for consumer usage. Products of consumer usage are of the personal care, household, insecticides, food, automotive, and institutional nature. Pharmaceutical and cosmetic products including perfume are not covered under this practice.1.1 This test method covers the determination of the basic storage stability of a mechanical pump dispenser with a product. 1.2 This test method covers an evaluation of the weight lost during storage of mechanical pump dispensers (spray or flow types) with a product. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：19.060;55.130 CCS：J71 发布：2005 实施：

NF T30-499-8-2021 粉末涂料. 第8部分: 热固性树脂粉末的储存稳定性的评定
简介：
信息：ICS：87.040 CCS：G51 发布：2021-07-14 实施：2021-09-18

MH/T 6085-2012 水基型液体飞机清洗剂储存稳定性试验方法
简介：
信息：ICS： CCS：G73 发布：2012-07-11 实施：2012-11-01

ASTM D6654-2005 机械泵分配器基本储存稳定性的标准试验方法
简介：Determining the storage of a mechanical pump dispenser for consumer usage. Products of consumer usage are of the personal care, household, insecticides, food, automotive, and institutional nature. Pharmaceutical and cosmetic products including perfume are not covered under this practice.1.1 This test method covers the determination of the basic storage stability of a mechanical pump dispenser with a consumer-type product.1.2 This test method covers an evaluation of the weight lost during storage of mechanical pump dispensers (spray or flow types) with a consumer-type product.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：19.060 (Mechanical testing); 55.130 (Aerosol conta CCS：J71 发布：2005 实施：

ISO 8130-8:2021 涂层粉末 - 第8部分:热固性粉末储存稳定性评估
简介：
信息：ICS：87.040 CCS：发布：2021-06-23 实施：

EN 16122-2012 住宅用和非住宅用储存设备.强度,耐久性和稳定性测定试验方法
简介：This European Standard specifies tests methods for the determination of strength, durability and stability for all types of domestic and non-domestic storage furniture including domestic kitchen furniture. It does not apply to office, industrial, catering equipment and retail storage, nor to industrial storage lockers. Strength and durability tests do not assess the structure of the building (for example the strength of wall hanging cabinets); rather, they include only the cabinets and the parts used for attachment. The wall and the wall attachments are not included. Requirements for safety, strength and durability can be found in other European Standards. Assessment of the effects of ageing, degradation and flammability is not included. Annex A (normative) contains details of test equipment for the slam open/shut testing of extension elements.
信息：ICS：97.140 CCS：发布：2012-07-01 实施：

ASTM D5304-2005 氧超压条件下评定中间馏出燃料储存稳定性的标准试验方法
简介：1.1 This test method covers a procedure for assessing the potential storage stability of middle distillate fuels such as Grade No. 1D and Grade No. 2D diesel fuels, in accordance with Specification D 975.1.2 This test method is applicable to either freshly refined fuels or fuels already in storage.1.3 This test method is suitable for fuels containing stabilizer additives as well as fuels containing no such additives.1.4 Appendix X1 provides information on other suggested test times and temperatures for which this test method may be used.1.5 The values in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 4.1, 6.2, 6.3, 7.4, 10.1, and 10.2.
信息：ICS：75.080 (Petroleum products in general) CCS：E31 发布：2005 实施：

ASTM F1105-09(2020) 准备飞机清洁剂液体型温度敏感型或溶剂型的标准操作用于储存稳定性测试
简介：
信息：ICS：49.040 CCS：发布：2020-11-01 实施：

FORD WSK-M5G39-B3-2011 底面修复的水分散的有高温储存稳定性的涂层***与福特WSS-M99P1111-A***一起使用.在福特WSK-M5G39-B中显示
简介：
信息：ICS： CCS：发布：2011-07-14 实施：

BS EN 14073-3-2004 办公家具.储存用家具.结构的稳定性和强度的测定用试验方法
简介：This document specifies test methods for the determination of strength of the structure of free standing or screen and wall hanging office storage furniture as well as stability of free standing units.This document is applicable to mobile furniture, with the exception of the test described in 5.2 which is replaced by the test described in 6.7 of EN 14074:2004.This document does not apply to high density mechanized filing systems, rotary filing systems, or plan files.The tests are intended to simulate overbalancing forces and structural loads, which may occur during normal functional use, as well as misuse that might reasonably be expected to occur.Safety depending on the structure of the building is not included, e.g. the strength of wall hanging cabinets includes only the cabinet and its parts. The wall and the wall attachment are not included.Safety requirements can be found in EN 14073-2. Assessment of ageing is not included.
信息：ICS：97.140 CCS：Y60 发布：2004-11-04 实施：2004-11-04

ASTM D5304-20 通过氧气过压评估中间馏分燃料储存稳定性的标准测试方法
简介：
信息：ICS：75.080 CCS：发布：2020-09-01 实施：

ASTM D5304-11 通过氧气过压评估中间馏分燃料储存稳定性的标准测试方法
简介：
信息：ICS：75.080 CCS：发布：2011-06-01 实施：

DIN EN 14073-3-2004 办公室家具.储存家具.第3部分:结构稳定性和强度测定的试验方法
简介：This standard specifies test methods for the determination of strength of the structure of free standing or screen and wall mounted office storage furniture as well as for the stability of free standing units.
信息：ICS：97.140 CCS：Y80 发布：2004-11 实施：2004-11-01

QB/T 5489-2020 喷墨墨水储存稳定性的检验方法
简介：
信息：ICS：87.080 CCS：A17 发布：2020-04-16 实施：2020-10-01

NF T30-499-8-2011 粉末涂料.第8部分:热固性树脂粉末的储存稳定性的评定
简介：
信息：ICS：87.040 CCS：G51 发布：2011-01-01 实施：2011-01-15

ASTM D6930-04 乳化沥青的沉降和储存稳定性的标准试验方法
简介：
信息：ICS：93.080.20 CCS：发布：2004-08-01 实施：

KS M ISO 8130-8-2019 涂层粉末 - 第8部分:热固性粉末储存稳定性评估
简介：
信息：ICS：87.040 CCS：发布：2019-12-12 实施：

ASTM D6930-10 乳化沥青的沉降和储存稳定性的标准试验方法
简介：
信息：ICS：93.080.20 CCS：发布：2010-12-01 实施：

EN 14073-3-2004 办公家具.储存用家具.第3部分:结构的稳定性和强度的测定用试验方法
简介：This document specifies test methods for the determination of strength of the structure of free standing or screen and wall hanging office storage furniture as well as stability of free standing units.This document is applicable to mobile furniture, with the exception of the test described in 5.2 which is replaced by the test described in 6.7 of EN 14074:2004.This document does not apply to high density mechanized filing systems, rotary filing systems, or plan files.The tests are intended to simulate overbalancing forces and structural loads, which may occur during normal functional use, as well as misuse that might reasonably be expected to occur.Safety de
信息：ICS：97.140 CCS：发布：2004-08-01 实施：

ASTM D6930-19 乳化沥青的沉降和储存稳定性的标准试验方法
简介：
信息：ICS：93.080.20 CCS：发布：2019-07-01 实施：

BS EN 13399-2010 沥青和沥青结合料.改性沥青的储存稳定性的测定
简介：This European Standard specifies a method for measuring the storage stability at high temperatures.
信息：ICS：75.140;91.100.50 CCS：E43 发布：2010-10-31 实施：2010-10-31

BS EN 13399-2004 石油及其制品的试验方法.BS 2000-517.沥青和沥青粘合剂.改性沥青的储存稳定性的测定
简介：) Identical with IP 517/2004.
信息：ICS：75.140 CCS：E43 发布：2004-01-16 实施：2004-01-16

ISO 7171-2019 家具 - 储存单元 - 测定稳定性的方法
简介：
信息：ICS：97.140 CCS：发布：2019-02-05 实施：

NF T66-053-2010 沥青和沥青粘合剂.改良沥青储存稳定性的测定
简介：
信息：ICS：75.140;91.100.50 CCS：E43 发布：2010-08-01 实施：2010-08-21

ASTM D6930-2004 乳化沥青沉淀和储存稳定性的标准试验方法
简介：This test method is useful for determining, in a comparatively short time, the storage stability or settlement of an emulsified asphalt. It is a measure of the permanence of the dispersion as related to time, but it is not to be construed to have significance as a measure of other stability aspects involved in use. 1.1 This test method covers the ability of an emulsified asphalt to remain as a uniform dispersion during storage. It is applicable to emulsified asphalts composed principally of a semisolid or liquid asphaltic base, water, and an emulsifying agent.1.2 This test method does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：93.080.20 (Road construction materials) CCS：E43 发布：2004 实施：

DIN EN 16121-2017 非家用储存用家具.安全性、强度、耐久性和稳定性的要求.德文版本EN 16121-2013+A1-2017
简介：This European Standard specifies requirements for the safety, strength, durability and stability for all types of non-domestic storage furniture. It does not apply to domestic storage, office storage, industrial storage, kitchen, catering equipment, retail storage, laboratory storage and industrial storage lockers. Requirements for strength and durability do not apply to the structure of the building for example the strength of wall hanging cabinets includes only the cabinets and the parts used for attachment. The wall and the wall attachments are not included. It does not include requirements for the resistance to ageing, degradation and flammability.
信息：ICS：97.140 CCS：Y81 发布：2017-1201 实施：

ASTM D7603-10 用于测定汽车齿轮油储存稳定性和相容性的标准测试方法
简介：
信息：ICS：75.100 CCS：发布：2010-04-01 实施：

ASTM D5304-03 通过氧气过压评估中间馏分燃料储存稳定性的标准测试方法
简介：
信息：ICS：75.080 CCS：发布：2003-06-10 实施：

BS EN 13399-2017 沥青和沥青结合料.改性沥青的储存稳定性的测定
简介：
信息：ICS： CCS：发布：2017-01-01 实施：2017-01-01

DIN 51471-2010 液体石油产品.燃料油预期损失(EL)的储存稳定性的测定
简介：This Standard specifies a method for the determination of storage stability of petroleum products, especially for middle-distillate-components and fuel oil EL in according to DIN 51603-1 which is used for firing purposes in oil firing apparatus and fuel oil providing apparatus where are vaporising burners and pressurized atomiser burners are used.
信息：ICS：75.160.20 CCS：E31 发布：2010-01 实施：

ASTM D5304-2003 用氧超压条件下评定蒸出燃料储存稳定性的标准试验方法
简介：1.1 This test method covers a procedure for assessing the potential storage stability of middle distillate fuels such as Grade No. 1D and Grade No. 2D diesel fuels, in accordance with Specification D 975.1.2 This test method is applicable to either freshly refined fuels or fuels already in storage.1.3 This test method is suitable for fuels containing stabilizer additives as well as fuels containing no such additives.1.4 Appendix X1 provides information on other suggested test times and temperatures for which this test method may be used.1.5 The values in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 4.1, 6.2, 6.3, 7.4, 10.1, and 10.2.
信息：ICS：75.080 (Petroleum products in general) CCS：E31 发布：2003 实施：

NY/T 1427-2016 农药常温储存稳定性试验通则
简介：本标准规定了农药常温储存稳定性试验方法和试验报告编写的要求。本标准适用于为申请农药制剂登记而进行的常温储存稳定性试验。
信息：ICS：65.020 CCS：B17 发布：2016-11-01 实施：2017-04-01

ASTM D7603-2010 测定机动车齿轮油的储存稳定性和相容性的标准试验方法
简介：To avoid equipment failure, a gear oil should remain a homogeneous liquid and the performance-enhancing additives should not separate out when the oil is stored for an extended period of time. In addition, because different oils are often mixed when topping off, gear oils from different manufacturers, or containing different base fluids or performance-enhancing additives should be completely miscible and compatible with each other. Any incompatibility of such mixtures may also result in equipment failure if gelation or additive dropout occurs. The test procedures described in this test method are designed to evaluate the performance of gear oils in each of the above circumstances. This test method is based on the separate test methods FED-STD-791/3440.1 and FED-STD-791/3440.2. Minor changes have been made to the FED test methods to provide a coherent unified procedure. These changes do not significantly alter the test procedures. This test method has, therefore, potential for use as an alternative to the FED test methods in gear oil specifications such as SAE J2360 and Specification D5760.1.1 This test method covers the determination of storage stability characteristics and the compatibility of automotive gear lubricants when blended with reference lubricants. The purpose of the test is to determine if performance-enhancing additives separate out under defined conditions. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.100 CCS：E34 发布：2010 实施：

ASTM F1105-2003 飞行器清洗剂制备的标准试验方法.对温度敏感的溶剂基液体清诘剂的储存稳定性试验
简介：This test method determines the procedure to be used to ensure the long-term storage stability of aircraft cleaning and maintenance products in order to ensure their ability to meet the shelf-life requirements called up in specifications or contract documents. The subsequent testing requirements are detailed in the specification or contract.1.1 This test method covers the determination of the stability in storage of liquid enzyme-based, terpene-based, and solvent-based chemical cleaning compounds used to clean the exterior surfaces of aircraft.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：49.040 (Coatings and related processes used in aer CCS：G73 发布：2003 实施：

ASTM D5304-15 通过氧气过压评估中间馏分燃料储存稳定性的标准测试方法
简介：
信息：ICS：75.080 CCS：发布：2015-04-01 实施：

INTERN CEMS GT-3B-2009 油漆的储存稳定性
简介：
信息：ICS： CCS：发布：2009-08-01 实施：

KS G ISO 7171-2002(2017) 家具.储存装置.稳定性的测定
简介：
信息：ICS：97.140 CCS：发布：2002-09-27 实施：

NF S94-750-6-2014 眼科植入物.眼内晶状体.第6部分:储存期限和运输稳定性试验
简介：La présente partie de l'ISO 11979 spécifie les essais permettant de déterminer la durée de conservation des lentilles intraoculaires (LIO) stériles dans leur emballage final. Ces essais incluent des modes opératoires permettant de vérifier la stabilité des LIO pendant la distribution et le stockage.
信息：ICS：11.040.70 CCS：C32 发布：2014-12-05 实施：2014-12-05

INTERN CEMS GT-3F-2009 加压罐中油漆的储存稳定性
简介：
信息：ICS： CCS：发布：2009-08-01 实施：

ISO 11979-6-2002 眼科植入物.眼内透镜.第6部分:储存期限和运输稳定性
简介：This part of ISO 11979 specifies tests by which the shelf-life of sterile intraocular lenses (lOLs) in their final packaging can be determined. These tests include procedures to establish the stability of lOLs in distribution and storage.
信息：ICS：11.040.70 CCS：C32 发布：2002-06 实施：

ASTM F1105-09(2014) 准备飞机清洁剂液体型温度敏感型或溶剂型的标准操作用于储存稳定性测试
简介：
信息：ICS：49.040 CCS：发布：2014-12-01 实施：

ASTM F1105-09 准备飞机清洁剂液体型温度敏感型或溶剂型的标准操作用于储存稳定性测试
简介：
信息：ICS：49.040 CCS：发布：2009-05-15 实施：

JIS K5600-2-7 ERRATUM 1-2002 涂料试验方法.第2部分:涂料的特性和稳定性.第7节:储存稳定性(勘误1)
简介：
信息：ICS： CCS：G50 发布：2002-04-10 实施：

DIN EN 16121-2013 非家用储存用家具.安全性、强度、耐久性和稳定性的要求.德文版本EN 16121-2013
简介：
信息：ICS：97.140 CCS：Y81 发布：2013-11 实施：

NF S94-750-6-2007 眼科植入物.眼内晶状体.第6部分:储存期限和运输稳定性
简介：
信息：ICS：11.040.70 CCS：C32 发布：2007-09-01 实施：2007-09-29

ASTM D6654-2001 机械泵分配器基本储存稳定性的标准试验方法
简介：1.1 This test method covers the determination of the basic storage stability of a mechanical pump dispenser with a consumer-type product.1.2 This test method covers an evaluation of the weight lost during storage of mechanical pump dispensers (spray or flow types) with a consumer-type product.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：19.060 (Mechanical testing); 55.130 (Aerosol conta CCS：J71 发布：2001 实施：

BS EN 16121-2013 非家用储存用家具.安全性、强度、耐久性和稳定性的要求
简介：
信息：ICS：97.140 CCS：Y80 发布：2013-09-30 实施：2013-09-30

ASTM D5304-06 通过氧气过压评估中间馏分燃料储存稳定性的标准测试方法
简介：
信息：ICS：75.080 CCS：发布：2006-05-01 实施：

BS EN 1429-2000 石油及石油产品试验方法.沥青和沥青粘合剂.由筛分法测定沥青乳液筛分残留物和储存稳定性
简介：Identical with IP 91/2000.
信息：ICS：75.140;91.100.50 CCS：E43 发布：2000-07-15 实施：2000-07-15

EN 16121-2013 非家用储存用家具.安全性,强度,耐久性和稳定性的要求
简介：This European Standard specifies requirements for the safety, strength, durability and stability for all types of non-domestic storage furniture. It does not apply to domestic storage, office storage, industrial storage, kitchen, catering equipment, retail storage, laboratory storage and industrial storage lockers. Requirements for strength and durability do not apply to the structure of the building for example the strength of wall hanging cabinets includes only the cabinets and the parts used for attachment. The wall and the wall attachments are not included. It does not include requirements for the resistance to ageing, degradation and flammability.
信息：ICS：97.140 CCS：Y80 发布：2013-09-01 实施：2013-09-01

ASTM D5304-2006 评定氧超压情况下中间蒸馏燃料储存稳定性的标准试验方法
简介：The results of this test method are useful in ranking a specific fuel sample against other specific fuel samples or standards with or without stabilizer additives when tested under identical conditions. This test method is not meant to relate a specific fuel to specific field handling and storage conditions. The formation of insolubles is affected by the material present in the storage container and by the ambient conditions. Since this test method is conducted in glass under standardized conditions, the results from different fuels can be compared on a common basis.1.1 This test method covers a procedure for assessing the potential storage stability of middle distillate fuels such as Grade No. 1D and Grade No. 2D diesel fuels, in accordance with Specification D 975.1.2 This test method is applicable to either freshly refined fuels or fuels already in storage.1.3 This test method is suitable for fuels containing stabilizer additives as well as fuels containing no such additives.1.4 Appendix X1 provides information on other suggested test times and temperatures for which this test method may be used.1.5 The values stated in SI unts are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 4.1, 6.2, 6.3, 7.4, 10.1, and 10.2.
信息：ICS：75.080 (Petroleum products in general) CCS：E31 发布：2006 实施：

JIS K5600-2-7-1999 涂料试验方法.第2部分:涂料的特性和稳定性.第7部分:储存稳定性
简介：この規格は，塗料及びその関連製品の試料採取並びに試験を取り扱う一連の規格のーつである。この規格は，塗料及び関連製品が貯蔵されたとき，使用に当たって安定であるかどうかを調べる試験方法について規定する。
信息：ICS：87.040 CCS：G50 发布：1999-04-20 实施：

NF T66-016-2013 沥青和沥青粘合剂.沥青乳化液筛渣的测定及通过筛分法测定储存稳定性
简介：
信息：ICS：75.140;91.100.50 CCS：E43 发布：2013-08-24 实施：2013-08-24

ASTM D5304-05 通过氧气过压评估中间馏分燃料储存稳定性的标准测试方法
简介：
信息：ICS：75.080 CCS：发布：2005-04-01 实施：

DD 248-1999 改进型沥青粘合剂的热储存稳定性测定
简介：Identical with IP PM CH/99.
信息：ICS：91.100.50;75.140 CCS：Q24 发布：1999-04-15 实施：1999-04-15

GOST EN 13399-2013 沥青和沥青粘合剂. 改性沥青储存稳定性的测定
简介：
信息：ICS：75.140 CCS：发布：2013 实施：2015-01-01

NF D65-010-3-2005 办公室家具.储存家具.第3部分:结构稳定性和强度测定的试验方法
简介：
信息：ICS：97.140 CCS：Y81 发布：2005-03-01 实施：2005-03-05

BS 4875-7-1998 家具稳定性和强度.第7部分:储存家具耐久性和强度的测定
简介：This part of BS 4875 describes methods for determination of the strength and durability of storage furniture. It does not apply to test methods for determining safety aspects of domestic storage furniture, which are given in BS EN 1727.This standard does not apply to the structural performance of kitchen furniture, which is covered by BS 6222, nor to office furniture, which is covered by BS 5459-3, nor to educational furniture, which is covered by BS 5873-4.
信息：ICS：97.140 CCS：Y80 发布：1998-10-15 实施：1998-10-15