ASTM B247-检测标准

ASTM B247-相关标准参考信息

ASTM B247-20 铝和铝合金锻件 手工锻件和轧制环锻件的标准规范
简介：
信息：ICS：77.150.10 CCS： 发布：2020-05-01 实施：

ASTM B247-2000 铝和铝合金压模锻件、手工锻件和轧制环锻件标准规范
简介：1.1 This specification covers aluminum-alloy (Note 1) die forgings, hand forgings, and rolled ring forgings as shown in Tables 2, 3, and 4 and in Section 10 for heat-treatable alloy forgings supplied in the F and 01 tempers. The maximum thicknesses for forgings within the scope of this specification are as indicated in those tables. Note 1-Throughout this specification use of the term alloy in the general sense includes aluminum as well as aluminum alloy. Note 2-For forging stock supplied as rolled or cold-finished bar or rod see Specification B211. For forging stock supplied as extruded bar or rod see Specification B221. 1.2 Alloy and temper designations are in accordance with ANSI H35.1. The equivalent Unified Numbering System alloy designations are those of Table 1 preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E527. 1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2. 1.4 A complete metric standard to Specification B247 has been developed-Specification B247M; therefore, no metric equivalents are presented in this specification.
信息：ICS：77.150.10 (Aluminium products) CCS：H61 发布：2000 实施：

简介： 信息：

ASTM B247M-15 铝和铝合金锻件 手工锻件和轧制环锻件（公制）的标准规范
简介：
信息：ICS：77.150.10 CCS： 发布：2015-10-01 实施：

ASTM B247M-2000 铝和铝合金压模锻件、手工锻件和轧制环锻件标准规范(米制)
简介：1.1 This specification covers aluminum-alloy (Note 1) die forgings, hand forgings, and rolled ring forgings as shown in Tables 2, 3, and 4 and in Section 10 for heat-treatable alloy forgings supplied in the F and 01 tempers. The maximum thicknesses for forgings within the scope of this specification are as indicated in those tables. Note 1-Throughout this specification use of the term alloy in the general sense includes aluminum as well as aluminum alloy. Note 2-For forging stock supplied as rolled or cold-finished bar or rod see Specification B211M. For forging stock supplied as extruded bar or rod see Specification B221M. 1.2 Alloy and temper designations are in accordance with ANSI H35.1M. The equivalent Unified Numbering System alloy designations are those of Table 1 preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E527. 1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2. 1.4 This specification is the metric counterpart of Specification B247.
信息：ICS：77.150.10 (Aluminium products) CCS：H61 发布：2000 实施：

简介： 信息：

ASTM B247-15 铝和铝合金锻件 手工锻件和轧制环锻件的标准规范
简介：
信息：ICS：77.150.10 CCS： 发布：2015-10-01 实施：

ASTM B247M-20 铝和铝合金模锻件、手工锻件和轧制环锻件的标准规范[米制]
简介：
信息：ICS：77.150.10 CCS：/ 发布：0000-00-00 实施：0000-00-00

简介： 信息：

ASTM B247-2015 铝和铝合金模锻件, 手持式锻件以及滚环锻件的标准规格
简介：1.1x00a0;This specification2 covers aluminum-alloy (Note 1) die forgings, hand forgings, and rolled ring forgings as shown in Table 2, Table 3 and Table 4 in Section 10 for heat-treatable alloy forgings supplied in the F and 01 tempers. The maximum thicknesses for forgings within the scope of this specification are as indicated in those tables. Note 1:x00a0;Throughout this specification use of the term alloy in the general sense includes aluminum as well as aluminum alloy. Note 2:x00a0;For forging stock supplied as rolled or cold-finished bar or rod see Specification B211. For forging stock supplied as extruded bar or rod see Specification B221. (A)x00a0;Limits are in weight percent maximum unless shown as a range or stated otherwise.(B)x00a0;Analysis shall be made for the elements for which limits are shown in this table.(C)x00a0;For purposes of determining conformance to these limits, an observed value or a calculated value obtained from analysis shall be rounded to the nearest unit in the last right-hand place of figures used in expressing the specified limit, in accordance with the rounding-off method of Practice E29.(D)x00a0;Others includes listed elements for which no specific limit is shown as well as unlisted metallic elements. The producer may analyze samples for trace elements not specified in the specification. However, such analysis is not required and may not cover all metallic Others elements. Should any analysis by the producer or the purchaser establish that an Others element exceeds the limit of Each or that the aggregate of several Others elements exceeds the limit of Total, the material shall be considered nonconforming.(E)x00a0;Other Elementsx2014;Total shall be the sum of unspecified metallic elements 0.0108201;% or more, rounded ......
信息：ICS：77.150.10 CCS： 发布：2015 实施：

简介： 信息：

简介： 信息：

ASTM B247M-2015 铝和铝合金模锻件, 手持式锻件以及滚环锻件的标准规格 (米制)
简介：1.1x00a0;This specification covers aluminum-alloy (Note 1) die forgings, hand forgings, and rolled ring forgings as shown in Tables 2-4 and in Section 10 for heat-treatable alloy forgings supplied in the F and 01 tempers. The maximum thicknesses for forgings within the scope of this specification are as indicated in those tables. Note 1:x00a0;Throughout this specification use of the term alloy in the general sense includes aluminum as well as aluminum alloy. Note 2:x00a0;For forging stock supplied as rolled or cold-finished bar or rod see Specification B211M. For forging stock supplied as extruded bar or rod see Specification B221M. (A)x00a0;Limits are in mass percent maximum unless shown as a range or stated otherwise.(B)x00a0;Analysis shall be made for the elements for which limits are shown in this table.(C)x00a0;For purposes of determining conformance to these limits, an observed value or a calculated value obtained from analysis shall be rounded to the nearest unit in the last right-hand place of figures used in expressing the specified limit, in accordance with the rounding-off method of Practice E29.(D)x00a0;Others includes listed elements for which no specific limit is shown as well as unlisted metallic elements. The producer may analyze samples for trace elements not specified in the specification. However, such analysis is not required and may not cover all metallic Others elements. Should any analysis by the producer or the purchaser establish that an Others element exceeds the limit of Each or that the aggregate of several Others elements exceeds the limit of Total, the material shall be considered nonconforming.(E)x00a0;Other Elementsx2014;Total shall be the sum of unspecified metallic elements 0.0108201;% or more, rounded to the second decimal before determining the sum.
信息：ICS：77.150.10 CCS： 发布：2015 实施：

简介： 信息：

简介： 信息：

ASTM B247-09 铝和铝合金锻件 手工锻件和轧制环锻件的标准规范
简介：
信息：ICS：77.150.10 CCS： 发布：2009-09-01 实施：

简介： 信息：

简介： 信息：

ASTM B247M-09 铝和铝合金模锻件、手工锻件和轧制环锻件的标准规范[米制]
简介：
信息：ICS：77.150.10 CCS： 发布：2009-09-01 实施：

简介： 信息：

简介： 信息：

ASTM B247-2009 铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范
简介：1.1 This specification covers aluminum-alloy (Note 1) die forgings, hand forgings, and rolled ring forgings as shown in Table 2, Table 3 and Table 4in Section 10 for heat-treatable alloy forgings supplied in the F and 01 tempers. The maximum thicknesses for forgings within the scope of this specification are as indicated in those tables. Note 18212;Throughout this specification use of the term alloyin the general sense includes aluminum as well as aluminum alloy.Note 28212;For forging stock supplied as rolled or cold-finished bar or rod see Specification B 211. For forging stock supplied as extruded bar or rod see Specification B 221. 1.2 Alloy and temper designations are in accordance with ANSI H35.1. The equivalent Unified Numbering System alloy designations are those of preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E 527.1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.1.4 A complete metric standard to Specification B 247 has been developed8212;Specification B 247M; therefore, no metric equivalents are presented in this specification.
信息：ICS：77.150.10 (Aluminium products) CCS：H61 发布：2009 实施：

简介： 信息：

简介： 信息：

ASTM B247M-2009 铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范(米制)
简介：1.1 This specification covers aluminum-alloy (Note 1) die forgings, hand forgings, and rolled ring forgings as shown in Table 1, Table 2 and Table 3 and in Section 10 for heat-treatable alloy forgings supplied in the F and 01 tempers. The maximum thicknesses for forgings within the scope of this specification are as indicated in those tables. Note 18212;Throughout this specification use of the term alloy in the general sense includes aluminum as well as aluminum alloy. Note 28212;For forging stock supplied as rolled or cold-finished bar or rod see Specification B 211M. For forging stock supplied as extruded bar or rod see Specification B 221M. 1.2 Alloy and temper designations are in accordance with ANSI H35.1/H35.1(M). The equivalent Unified Numbering System alloy designations are those of Table 4 preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E 527. 1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2. 1.4 This specification is the SI companion to Specification B 247.
信息：ICS：77.150.10 (Aluminium products) CCS：H61 发布：2009 实施：

简介： 信息：

简介： 信息：

ASTM B247-02a 铝和铝合金锻件 手工锻件和轧制环锻件的标准规范
简介：
信息：ICS：77.150.10 CCS： 发布：2002-10-10 实施：

简介： 信息：

简介： 信息：

ASME SEC II B SB-247-2002 铝合金模块和人工锻件用规范。ASTM B247-95a
简介：Boiler and Pressure Vessel.Specification for Aluminum-Alloy Die and Hand Forgings ASTM B247-95a
信息：ICS： CCS：J32 发布：2002-07-01 实施：

简介： 信息：

简介： 信息：

ASTM B247-02 铝和铝合金锻件 手工锻件和轧制环锻件的标准规范
简介：
信息：ICS：77.150.10 CCS： 发布：2002-05-10 实施：

简介： 信息：

简介： 信息：

ASTM B247M-02 铝和铝合金模锻件、手工锻件和轧制环锻件的标准规范[米制]
简介：
信息：ICS：77.150.10 CCS： 发布：2002-04-10 实施：

简介： 信息：

简介： 信息：

ASTM B247M-02a 铝和铝合金模锻件、手工锻件和轧制环锻件的标准规范[米制]
简介：
信息：ICS：77.150.10 CCS： 发布：2002-04-10 实施：

简介： 信息：

简介： 信息：

ASTM B247M-2002a 铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范(米制)
简介：1.1 This specification covers aluminum-alloy (Note 1) die forgings, hand forgings, and rolled ring forgings as shown in Table 2, Table 3 and Table 4 and in Section 10 for heat-treatable alloy forgings supplied in the F and 01 tempers. The maximum thicknesses for forgings within the scope of this specification are as indicated in those tables. Note 1 -- Throughout this specification use of the term alloyin the general sense includes aluminum as well as aluminum alloy.Note 2--For forging stock supplied as rolled or cold-finished bar or rod see Specification B211M. For forging stock supplied as extruded bar or rod see Specification B221M. 1.2 Alloy and temper designations are in accordance with ANSI H35.1. The equivalent Unified Numbering System alloy designations are those Table 1 of preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E527.1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.1.4 This specification is the metric counterpart of Specification B247 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this specification.
信息：ICS：77.150.10 (Aluminium products) CCS：H61 发布：2002 实施：

简介： 信息：

简介： 信息：

ASTM B247-2002a 铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范
简介：1.1 This specification covers aluminum-alloy (Note 1) die forgings, hand forgings, and rolled ring forgings as shown in Table 2, Table 3 and Table 4in Section 10 for heat-treatable alloy forgings supplied in the F and 01 tempers. The maximum thicknesses for forgings within the scope of this specification are as indicated in those tables. Note 18212;Throughout this specification use of the term alloyin the general sense includes aluminum as well as aluminum alloy.Note 28212;For forging stock supplied as rolled or cold-finished bar or rod see Specification B 211. For forging stock supplied as extruded bar or rod see Specification B 221. 1.2 Alloy and temper designations are in accordance with ANSI H35.1. The equivalent Unified Numbering System alloy designations are those of preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E 527.1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.1.4 A complete metric standard to Specification B 247 has been developed8212;Specification B 247M; therefore, no metric equivalents are presented in this specification.
信息：ICS：77.150.10 (Aluminium products) CCS：H61 发布：2002 实施：

简介： 信息：

简介： 信息：

ASTM B247-2002 铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范
简介：1.1 This specification covers aluminum-alloy (Note 1) die forgings, hand forgings, and rolled ring forgings as shown in Table 2, Table 3 and Table 4 in Section 10 for heat-treatable alloy forgings supplied in the F and 01 tempers. The maximum thicknesses for forgings within the scope of this specification are as indicated in those tables. Note 18212;Throughout this specification use of the term alloy in the general sense includes aluminum as well as aluminum alloy.Note 28212;For forging stock supplied as rolled or cold-finished bar or rod see Specification B 211. For forging stock supplied as extruded bar or rod see Specification B 221. 1.2 Alloy and temper designations are in accordance with ANSI H35.1. The equivalent Unified Numbering System alloy designations are those of preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E 527.1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.1.4 A complete metric standard to Specification B 247 has been developed8212;Specification B 247M; therefore, no metric equivalents are presented in this specification.
信息：ICS：77.150.10 (Aluminium products) CCS：H61 发布：2002 实施：

简介： 信息：

简介： 信息：

ASTM B247M-2002 铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范(米制)
简介：1.1 This specification covers aluminum-alloy (Note 1) die forgings, hand forgings, and rolled ring forgings as shown in Table 2, Table 3 and Table 4 and in Section 10 for heat-treatable alloy forgings supplied in the F and 01 tempers. The maximum thicknesses for forgings within the scope of this specification are as indicated in those tables. Note 1 -- Throughout this specification use of the term alloyin the general sense includes aluminum as well as aluminum alloy.Note 2--For forging stock supplied as rolled or cold-finished bar or rod see Specification B211M. For forging stock supplied as extruded bar or rod see Specification B221M. 1.2 Alloy and temper designations are in accordance with ANSI H35.1. The equivalent Unified Numbering System alloy designations are those Table 1 of preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E527.1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.1.4 This specification is the metric counterpart of Specification B247 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this specification.
信息：ICS：77.150.10 (Aluminium products) CCS：H61 发布：2002 实施：

简介： 信息：

简介： 信息：

ASTM B247-00 铝和铝合金锻件 手工锻件和轧制环锻件的标准规范
简介：
信息：ICS：77.150.10 CCS： 发布：2000-05-10 实施：

简介： 信息：

简介： 信息：

ASTM B247M-00 铝和铝合金模锻件、手工锻件和轧制环锻件的标准规范[米制]
简介：
信息：ICS：77.150.10 CCS： 发布：2000-05-10 实施：

简介： 信息：

简介： 信息：