EN12566-3检测标准

发布时间:2023-02-06 11:12:46 阅读量: 来源:中析研究所

EN12566-3相关标准参考信息

DIN EN 12566-3-2016 50 PT以下的小型废水处理系统. 第3部分:包装的和/或现场装配的家用废水处理设备.德文版本EN 12566-3-2016
简介:
信息:ICS:13.060.30 CCS:Q81 发布:2016-12 实施

BS EN 12566-3-2016 小于50 PT的小型废水处理系统.包装的和/或现场装配的生活废水处理设备
简介:
信息:ICS:13.060.30 CCS:Q81 发布:2016-09-30 实施:2016-09-30

EN 12566-3-2016 小型废水水处理系统多达50PT-第3部分:包装和/或现场组装生活污水处理厂
简介:This European Standard specifies requirements, test methods, the marking and evaluation of conformity for packaged and/or site assembled domestic wastewater treatment plants (including guest houses and businesses) used for populations up to 50 inhabitants. Small wastewater treatment plants according to this European Standard are used for the treatment of domestic wastewater. It covers plants made of concrete, steel, PVC-U, Polyethylene (PE), Polypropylene (PP), Glass Reinforced Polyester (GRP-UP), Polydicyclopentadiene (PDCPD), PVC and EPDM. The test methods specified in this European Standard establish the performance of the plant, needed to verify its suitability for the end use (see 5.2). This European Standard applies to small wastewater treatment plants for use buried in the ground where no vehicle loads are applied to the product. This European Standard applies to plants where all prefabricated components are factory or site-assembled by one manufacturer and which are tested as a whole. NOTE In some countries, domestic wastewater treatment plants are followed by other systems to conform to national regulations.
信息:ICS:13.060.30 CCS:Z23 发布:2016-08 实施

EN 12566-3-2016
简介:This European Standard specifies requirements, test methods, the marking and evaluation of conformity for packaged and/or site assembled domestic wastewater treatment plants (including guest houses and businesses) used for populations up to 50 inhabitants. Small wastewater treatment plants according to this European Standard are used for the treatment of domestic wastewater. It covers plants made of concrete, steel, PVC-U, Polyethylene (PE), Polypropylene (PP), Glass Reinforced Polyester (GRP-UP), Polydicyclopentadiene (PDCPD), PVC and EPDM. The test methods specified in this European Standard establish the performance of the plant, needed to verify its suitability for the end use (see 5.2). This European Standard applies to small wastewater treatment plants for use buried in the ground where no vehicle loads are applied to the product. This European Standard applies to plants where all prefabricated components are factory or site-assembled by one manufacturer and which are tested as a whole. NOTE In some countries, domestic wastewater treatment plants are followed by other systems to conform to national regulations.
信息:ICS:13.060.30 CCS发布:2016-08 实施

DIN EN 12566-3-2013 50 PT以下的小型废水处理系统. 第3部分:包装的和/或现场装配的家用废水处理设备; 英文版本EN 12566-3-2005+A2-2013
简介:
信息:ICS:13.060.30 CCS:P41 发布:2013-09 实施

DS/EN 12566-3+A2-2013
简介:This European Standard specifies requirements, test methods, the marking and evaluation of conformity for packaged and/or site assembled domestic wastewater treatment plants (including guest houses and businesses) used for populations up to 50 inhabitants
信息:ICS:13.060.30 CCS发布:2013-08-23 实施:2013-08-23

LST EN 12566-3-2005+A2-2013 50 PT及以下的小型废水处理系统. 第3部分: 打包好的和/或现场组装的家用废水处理设备
简介:
信息:ICS:13.060.30 CCS发布:2013-06-21 实施

EN 12566-3+A2-2013
简介:This European Standard specifies requirements, test methods, the marking and evaluation of conformity for packaged and/or site assembled domestic wastewater treatment plants (including guest houses and businesses) used for populations up to 50 inhabitants. Small wastewater treatment plants according to this European Standard are used for the treatment of raw domestic wastewater. It covers plants with tanks made of concrete, steel, PVC-U, Polyethylene (PE), Polypropylene (PP), Glass Reinforced Polyester (GRP-UP), Polydicyclopentadiene (PDCPD) and container made of flexible sheets (PEHD, PP, PVC, EPDM). The test methods specified in this European Standard establish the performance of the plant, needed to verify its suitability for the end use (see 3.1). This European Standard applies for small wastewater treatment plants for use buried in the ground where no vehicle loads are applied to the product. This European Standard applies to plants where all prefabricated components are factory or site-assembled by one manufacturer and which are tested as a whole. NOTE In some countries, domestic wastewater treatment plants are followed by other systems to conform to national regulations.
信息:ICS:13.060.30 CCS发布:2013-06 实施

DIN SPEC 4261-6-2011 根据EN 12566-3和DIN 4261-1标准小型污水处理厂运营期间家用废水的名义日负荷的测定
简介:
信息:ICS:13.060.30 CCS:P40 发布:2011-02 实施

LST EN 12566-3-2006+A1-2009
简介:
信息:ICS:13.060.30 CCS发布:2009-04-15 实施:2009-04-15

BS EN 12566-3-2005+A2-2013 小于50 PT的小型废水处理系统.包装的和/或现场装配的生活废水处理设备
简介:
信息:ICS:13.060.30 CCS:Q81 发布:2006-02-15 实施:2006-02-15

BS EN 12566-3+A2-2006
简介:
信息:ICS:13.060.30 CCS发布:2006-02-15 实施:2006-02-15

BS EN 12566-3-2005 小于50PT的小型废水处理系统.第3部分:包装的和/或现场装配的家用废水处理设备
简介:This European Standard specifies requirements, test methods, the marking and evaluation of conformity forpackaged and/or site assembled domestic wastewater treatment plants (including guest houses andbusinesses) used for populations up to 50 inhabitants. Small wastewater treatment plants according to thisEuropean Standard are used for the treatment of raw domestic wastewater.It covers plants with tanks made of concrete, steel, PVC-U, Polyethylene (PE), Polypropylene (PP) and GlassReinforced Polyester (GRP-UP).The test methods specified in this European Standard establish the performance of the plant, needed to verify its suitability for the end use (see 3.1).This European Standard applies for small wastewater treatment plants for use buried in the ground where no vehicle loads are applied to the product.This European Standard applies to plants where all prefabricated components are factory or site-assembled by one manufacturer and which are tested as a whole.NOTE In some countries, domestic wastewater treatment plants are followed by other systems to conform to national regulations.
信息:ICS:13.060.30 CCS:Q81 发布:2006-02-15 实施:2006-02-15

EN 12566-3-2005 高达50PT的小型废水处理系统.第3部分:整装的和/或现场装配的家用污水处理设备.包含修改件A1-2009
简介:This European Standard specifies requirements, test methods, the marking and evaluation of conformity for packaged and/or site assembled domestic wastewater treatment plants (including guest houses and businesses) used for populations up to 50 inhabitants. Small wastewater treatment plants according toThis European Standard are used for the treatment of raw domestic wastewater. It covers plants with tanks made of concrete, steel, PVC-U, Polyethylene (PE), Polypropylene (PP) and Glass Reinforced Polyester (GRP-UP). The test methods specified inThis European Standard establish the performance of the plant, needed to verify its suitability for the end use (see 3.1).This European Standard applies for small wastewater treatment plants for use buried in the ground where no vehicle loads are applied to the product.This European Standard applies to plants where all prefabricated components are factory or site-assembled by one manufacturer and which are tested as a whole. NOTE In some countries, domestic wastewater treatment plants are followed by other systems to conform to national regulations.
信息:ICS:13.060.30 CCS发布:2005-07-01 实施

检测标准 EN12566-3检测标准

检测资质

权威认证,确保检测数据的准确性和可靠性

CMA认证

CMA认证

中国计量认证

CNAS认证

CNAS认证

中国合格评定国家认可委员会

ISO认证

ISO认证

质量管理体系认证

行业资质

行业资质

多项行业权威认证

了解我们

专业团队,丰富经验,为您提供优质的检测服务

了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们

先进检测设备

引进国际先进仪器设备,确保检测数据的准确性和可靠性

精密检测仪器

精密光谱分析仪

用于材料成分分析和元素检测,精度可达ppm级别

色谱分析仪器

高效液相色谱仪

用于食品安全检测和化学成分分析,分离效率高

材料测试设备

万能材料试验机

用于材料力学性能测试,可进行拉伸、压缩等多种测试

热分析仪器

差示扫描量热仪

用于材料热性能分析,测量相变温度和热焓变化

显微镜设备

扫描电子显微镜

用于材料微观结构观察,分辨率可达纳米级别

环境检测设备

气相色谱质谱联用仪

用于复杂有机化合物的分离和鉴定,灵敏度高

我们的优势

选择中科光析,选择专业与信赖

权威资质

具备CMA、CNAS等多项国家级资质认证,检测报告具有法律效力

先进设备

引进国际先进检测设备,确保检测数据的准确性和可靠性

专业团队

拥有经验丰富的检测工程师和技术专家团队

快速响应

7×24小时服务热线,快速响应客户需求,及时出具检测报告

需要专业检测服务?

我们的专业技术团队随时为您提供咨询和服务支持,欢迎随时联系我们

在线咨询工程师

定制实验方案

24小时专业客服在线

需要检测服务?

专业工程师在线解答

400-640-9567

全国服务热线

查看报告模版