14224检测标准

发布时间：2023-02-04 21:56:30 • 阅读量： • 来源：中析研究所

14224相关标准参考信息

GB/T 14224-1993 牧草和青饲料收获机械分类及术语
简介：本标准规定了牧草和青饲料收获机械的分类、术语和定义。本标准适用于在饲草料生产中所用的收获机具。
信息：ICS：65.060.50 CCS：B80 发布：1993-03-03 实施：1993-10-01

JB/T 14224-2022 船用泵机械密封
简介：
信息：ICS： CCS：发布：2022-04-08 实施：2022-10-01

DIN EN ISO 14224-2017 石油、石化产品和天然气工业.设备可靠性和维修数据的采集与交换(ISO 14224-2016,修正版2016-10-01);英文版本EN ISO 14224-2016,只在CD-ROM
简介：
信息：ICS：75.180.01 CCS：E92 发布：2017-04 实施：

BS EN ISO 14224-2016 石油天然气工业.设备可靠性和维修数据的采集和交换
简介：
信息：ICS：75.180.01;75.200 CCS：E01 发布：2016-10-31 实施：2016-10-31

EN ISO 14224-2016 石油,石化和天然气工业可靠性和维修数据的采集与交换设备(ISO 14224:2016,修正版本2016-10-01)
简介：
信息：ICS：75.180.01;75.200 CCS：E34 发布：2016-10 实施：

ISO 14224:2016 石油天然气工业 - 收集和交换设备的可靠性和维护数据
简介：
信息：ICS：75.200 CCS：发布：2016-09-16 实施：

ISO 14224-2016 石油、石化产品和天然气工业.设备可靠性和维修数据的采集与交换
简介：
信息：ICS：75.180.01;75.200 CCS：E92 发布：2016-09 实施：

DIN EN 14224-2010 防水用柔性薄板.混凝土船桥甲板和其他车辆可通过的混凝土表面的防水.断裂桥接能力的测定.德文版本EN 14224-2010
简介：
信息：ICS：91.100.50 CCS：Q17 发布：2010-11 实施：

DS/EN 14224-2010
简介：This European Standard describes a test method for determining the crack bridging ability of reinforced bitumen sheets used in waterproofing systems on concrete bridge decks and other areas of concrete trafficable by vehicles.
信息：ICS：93.040 CCS：发布：2010-10-22 实施：2010-10-22

LST EN 14224-2010
简介：
信息：ICS：91.100.50 CCS：发布：2010-09-17 实施：2010-09-17

BS EN 14224-2010 防水柔性薄板材.混凝土桥甲板和其他车辆可通过的混凝土表面的防水.断裂搭接能力的测定
简介：This European Standard describes a test method for determining the crack bridging ability of reinforcedbitumen sheets used in waterproofing systems on concrete bridge decks and other areas of concretetrafficable by vehicles.
信息：ICS：91.100.50 CCS：Q17 发布：2010-06-30 实施：2010-06-30

EN 14224-2010 防水用柔性薄板.混凝土船桥甲板和其他车辆可通过的混凝土表面的防水.断裂桥接能力的测定
简介：This European Standard describes a test method for determining the crack bridging ability of reinforced bitumen sheets used in waterproofing systems on concrete bridge decks and other areas of concrete trafficable by vehicles.
信息：ICS：91.100.50 CCS：发布：2010-05-01 实施：

BS EN 14224-2005 防水柔性薄板材.混凝土桥甲板和其他车辆可通过的混凝土表面的防水.断裂搭接能力的测定
简介：This European Standard describes a test method for determining the crack bridging ability of reinforced bitumen sheets used in waterproofing systems on concrete bridge decks and other areas of concrete trafficable by vehicles.
信息：ICS：91.100.50 CCS：Q17 发布：2007-06-29 实施：2007-06-29

DS/EN ISO 14224-2007
简介：This Standard provides a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum, natural gas and petrochemical industries during the operational life cycle of equipment. Annex A contains an equipment summary that this standard is meant to cover.Its objective is to enable the collection, exchange and analysis of data based on common viewpoints. It recommends a minimum amount of data that shall be collected and it focuses on the two main issues:a) Data requirements for the type of data to be collected for use in various analysis methodologies;b) S
信息：ICS：75.180.01 CCS：发布：2007-06-28 实施：2007-06-28

LST EN ISO 14224-2007
简介：
信息：ICS：75.200;75.180.01 CCS：发布：2007-05-31 实施：2007-05-31

DIN EN ISO 14224-2007 石油、石化和天然气工业.设备可靠性和维修数据的采集与交换
简介：This International Standard provides a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum, natural gas and petrochemical industries during the operational life cycle of equipment. It describes data-collection principles and associated terms and definitions that constitute a "reliability language" that can be useful for communicating operational experience. The failure modes defined in the normative part of this International Standard can be used as a "reliability thesaurus" for various quantitative as well as qualitative applications. This International Standard also describes data quality control and assurance practices to provide guidance for the user.Standardization of data-collection practices facilitates the exchange of information between parties, e.g. plants, owners, manufacturers and contractors. This International Standard establishes requirements that any in-house or commercially available RM data system is required to meet when designed for RM data exchange. Examples, guidelines and principles for the exchange and merging of such RM data are addressed.Annex A contains a summary of equipment that this International Standard covers.• This International Standard recommends a minimum amount of data that is required to be collected and it focuses on two main issues:— data requirements for the type of data to be collected for use in various analysis methodologies;— standardized data format to facilitate the exchange of reliability and maintenance data betweenplants, owners, manufacturers and contractors.• The following main categories of data are to be collected:— equipment data, e.g. equipment taxonomy, equipment attributes;— failure data, e.g. failure cause, failure consequence;— maintenance data, e.g. maintenance action, resources used, maintenance consequence, down time. NOTE Clause 9 gives further details on data content and data format.• The main areas where such data are used are the following:— reliability, e.g. failure events and failure mechanisms;— availability/efficiency, e.g. equipment availability, system availability, plant production availability;— maintenance, e.g. corrective and preventive maintenance, maintenance supportability;— safety and environment, e.g. equipment failures with adverse consequences for safety and/or environment.This International Standard does not apply to the following:— data on (direct) cost issues;— data from laboratory testing and manufacturing (e.g. accelerated lifetime testing);— complete equipment data sheets (only data seen relevant for assessing the reliability performanceare included);— additional on-service data that an operator, on an individual basis, can consider useful for operationand maintenance;— methods for analysing and applying RM data (however, principles for how to calculate some basic reliability and maintenance parameters are included in the annexes).
信息：ICS： CCS：E90 发布：2007-04 实施：

BS EN ISO 14224-2006 石油天然气工业.设备可靠性和维修数据的采集和交换
简介：ISO 14224:2006 provides a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum, natural gas and petrochemical industries during the operational life cycle of equipment. It describes data-collection principles and associated terms and definitions that constitute a "reliability language" that can be useful for communicating operational experience. The failure modes defined in ISO 14224:2006 can be used as a "reliability thesaurus" for various quantitative as well as qualitative applications. ISO 14224:2006 also describes data quality control and assurance practices to provide guidance for the user.Standardization of data-collection practices facilitates the exchange of information between parties, e.g. plants, owners, manufacturers and contractors. ISO 14224:2006 establishes requirements that any in-house or commercially available RM data system is required to meet when designed for RM data exchange. Examples, guidelines and principles for the exchange and merging of such RM data are addressed.ISO 14224:2006 recommends a minimum amount of data that is required to be collected and focuses on the two main issues: data requirements for the type of data to be collected for use in various analysis methodologies and standardized data format to facilitate the exchange of reliability and maintenance data between plants, owners, manufacturers and contractors.The following main categories of data are to be collected: equipment data, e.g. equipment taxonomy, equipment attributes; failure data, e.g. failure cause, failure consequence; maintenance data, e.g. maintenance action, resources used, maintenance consequence, down time.ISO 14224:2006 does not apply to data on (direct) cost issues; data from laboratory testing and manufacturing (e.g. accelerated lifetime testing); complete equipment data sheets (only data seen relevant for assessing the reliability performance are included); additional on-service data that an operator, on an individual basis, can consider useful for operation and maintenance; and methods for analysing and applying RM data (however, principles for how to calculate some basic reliability and maintenance parameters are included).
信息：ICS：75.180.01;75.200 CCS：E01 发布：2007-02-28 实施：2007-02-28

BS EN ISO 14224-2007
简介：
信息：ICS：75.180.01;75.200 CCS：发布：2007-02-28 实施：2007-02-28

ISO 14224:2006 石油、石化和天然气工业——设备可靠性和维护数据的收集和交换
简介：
信息：ICS：75.200 CCS：发布：2006-12-08 实施：

EN ISO 14224-2006
简介："This International Standard provides a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum@ natural gas and petrochemical industries during the operational life cycle of equipment. It describes data-collection principles and associated terms and definitions that constitute a ""reliability language"" that can be useful for communicating operational experience. The failure modes defined in the normative part of this International Standard can be used as a ""reliability thesaurus"" for various quantitative as well as qualitative applications. This International Standard also describes data quality control and assurance practices to provide guidance for the user. Standardization of data-collection practices facilitates the exchange of information between parties@ e.g. plants@ owners@ manufacturers and contractors. This International Standard establishes requirements that any inhouse or commercially available RM data system is required to meet when designed for RM data exchange. Examples@ guidelines and principles for the exchange and merging of such RM data are addressed. Annex A contains a summary of equipment that this International Standard covers. ? This International Standard recommends a minimum amount of data that is required to be collected and it focuses on two main issues: ?? data requirements for the type of data to be collected for use in various analysis methodologies; ?? standardized data format to facilitate the exchange of reliability and maintenance data between plants@ owners@ manufacturers and contractors. ? The following main categories of data are to be collected: ?? equipment data@ e.g. equipment taxonomy@ equipment attributes; ?? failure data@ e.g. failure cause@ failure consequence; ?? maintenance data@ e.g. maintenance action@ resources used@ maintenance consequence@ down time. NOTE Clause 9 gives further details on data content and data format. ? The main areas where such data are used are the following: ?? reliability@ e.g. failure events and failure mechanisms; ?? availability/efficiency@ e.g. equipment availability@ system availability@ plant production availability; ?? maintenance@ e.g. corrective and preventive maintenance@ maintenance supportability; ?? safety and environment@ e.g. equipment failures with adverse consequences for safety and/or environment. ? This International Standard does not apply to the following: ?? data on (direct) cost issues; ?? data from laboratory testing and manufacturing (e.g. accelerated lifetime testing); ?? complete equipment data sheets (only data seen relevant for assessing the reliability performance are included); ?? additional on-service data that an operator@ on an individual basis@ can consider useful for operation and maintenance; ?? methods for analysing and applying RM data (however@ principles for how to calculate some basic reliability and maintenance parameters are included in the annexes)."
信息：ICS：/ CCS：/ 发布：2006-12-01 实施：2016-10-28