拉杆铝合金管材检测标准

发布时间：2023-03-23 05:04:43 • 阅读量： • 来源：中析研究所

拉杆铝合金管材相关标准参考信息

DIN EN 754-2-2017 铝和铝合金.冷拉杆材/棒材和管材.第2部分:机械特性.德文版本EN 754-2-2016
简介：
信息：ICS：77.150.10 CCS：H61 发布：2017-02 实施：

DIN EN 754-8-2008 铝和铝合金.冷拉杆材/棒材和管材.第8部分:带孔管材的尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawnporthole tubes with an outside diameter (OD) from 3 mm to 350 mm (round tube, see Figure 1 ) or with a crosssection contained within a circumscribing circle (~'D) from 8 mm to 300 mm (other than round tube, see Figure2), supplied in straight lengths.This document only applies to cold drawn tube for general engineering applications made in the followingalloys:-- EN AW-1050A, EN AW-1200;-- EN AW-3003, EN AW-3103;-- EN AW-5005, EN AW-5005A, EN AW-5049, EN AW-5251, EN AW-5052;-- EN AW-6012, EN AW-6060, EN AW-6061, EN AW-6262, EN AW-6262A;-- EN AW-6063, EN AW-6063A, EN AW-6065, EN AW-6082;-- EN AW-7020.The temper designations used in this part are according to EN 515.This document only applies to tube produced by the porthole/bridge method of extrusion only (and then colddrawn to the final dimensions).This document does not apply to:-- cold drawn tubes produced by the seamless, die/mandrel method (EN 754-7),-- tubes delivered in coils (EN 13958),-- coiled tubes cut to length (EN 13958).
信息：ICS：77.150.10 CCS：H61 发布：2008-06 实施：

EN 754-8-2008 铝和铝合金.冷拉杆材棒材和管材.第8部分:带孔管材的尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawn porthole tubes with an outside diameter (OD) from 3 mm to 350 mm (round tube, see Figure 1) or with a cross section contained within a circumscribing circle (CD) from 8 mm to 300 mm (other than round tube, see Figure 2), supplied in straight lengths.This document only applies to cold drawn tube for general engineering applications made in the following alloys: EN AW-1050A, EN AW-1200; EN AW-3003, EN AW-3103; EN AW-5005, EN AW-5005A, EN AW-5049, EN AW-5251, EN AW-5052; EN AW-6012, EN AW-6060, EN AW-6061, EN AW-6262, EN AW-6262A; EN AW-6063, EN AW-6063A, EN AW-6065, EN AW-6082; EN AW-7020. The temper designations used inThis part are according to EN 515.This document only applies to tube produced by the porthole/bridge method of extrusion only (and then cold drawn to the final dimensions).This document does not apply to: cold drawn tubes produced by the seamless, die/mandrel method (EN 754-7), tubes delivered in coils (EN 13958), coiled tubes cut to length (EN 13958). Figure 1-Round tube Figure 2-Circumscribing circle for other than round tube
信息：ICS： CCS：发布：2008-03-01 实施：

BS EN 754-2-2016 铝和铝合金. 冷拉杆材/棒材和管材. 机械性能
简介：
信息：ICS：77.150.10 CCS：H61 发布：2016-11-30 实施：2016-11-30

DIN EN 754-3-2008 铝及铝合金.冷拉杆材/棒材和管材.第3部分:圆棒材的尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawnround bars having diameters in the range from 3 mm up to and including 100 mm.The temper designations used in this part are according to EN 515.
信息：ICS：77.150.10 CCS：H61 发布：2008-06 实施：

EN 754-3-2008 铝及铝合金.冷拉杆材棒材和管材.第3部分:圆棒材的尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawn round bars having diameters inThe range from 3 mm up to and including 100 mm.The temper designations used inThis part are according to EN 515.
信息：ICS：77.150.10 CCS：发布：2008-03-01 实施：

DIN EN 754-1-2016 铝和铝合金.冷拉杆材/棒材和管材.第1部分:检验和交货技术条件.德文版本EN 754-1-2016
简介：
信息：ICS：77.150.10 CCS：H61 发布：2016-10 实施：

DIN EN 754-4-2008 铝和铝合金.冷拉杆材/棒材和管材.第4部分:方形钢的尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawnsquare bars having widths across flats from 3 mm up to and including 100 mm.The temper designations used in this part are according to EN 515.
信息：ICS：77.150.10 CCS：H61 发布：2008-06 实施：

EN 754-5-2008 铝和铝合金.冷拉杆材棒材和管材.第5部分:矩形棒材的尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawn rectangular bars having thicknesses inThe range from 2 mm up to and including 60 mm and widths inThe range from 5 mm up to and including 200 mm.The temper designations used inThis part are according to EN 515.
信息：ICS：77.150.10 CCS：发布：2008-03-01 实施：

DIN EN 754-8-2016 铝和铝合金.冷拉杆材/棒材和管材.第8部分:带孔管材的尺寸和形状公差.德文版本EN 754-8-2016
简介：
信息：ICS：77.150.10 CCS：H61 发布：2016-10 实施：

DIN EN 754-7-2008 铝和铝合金.冷拉杆材/棒材和管材.第7部分:无缝管的尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloys colddrawn seamless tubes with an outside diameter (OD) from 3 mm to 350 mm (round tube, see Figure 1) orwith a cross section contained within a circumscribing circle (CD) from 8 mm to 300 mm (other than roundtube, see Figure 2) supplied in straight lengths.This standard only applies to tube produced by the seamless die/mandrel method of extrusion (and then colddrawn to the final dimensions required).The temper designations used in this part are according to EN 515.This document applies to cold drawn seamless tube for general engineering applications.This document does not apply to:-- cold drawn tube produced by the porthole/bridge method (EN 754-8),-- tubes delivered in coils (EN 13958),-- coiled tubes cut to lenath (EN 13958).
信息：ICS：77.150.10 CCS：H61 发布：2008-06 实施：

DIN EN 754-2-2017E 铝和铝合金.冷拉杆材/棒材和管材.第2部分:机械特性.德文版本EN 754-2-2016
简介：
信息：ICS：77.150.10 CCS：H61 发布：实施：0000-00-00

DIN EN 754-7-2016 铝和铝合金.冷拉杆材/棒材和管材.第7部分:无缝管的尺寸和形状公差.德文版本EN 754-7-2016
简介：
信息：ICS：77.150.10 CCS：H61 发布：2016-10 实施：

DIN EN 754-2-2008 铝和铝合金.冷拉杆材/棒材和管材.第2部分:机械性能
简介：This document specifies the mechanical property limits resulting from tensile testing applicable to aluminiumand aluminium alloy cold drawn rod/bar and tube.Technical conditions for inspection and delivery, including product and testing requirements, are specified inEN 754-1. Temper designations are defined in EN 515. The chemical composition limits for these materialsare given in EN 573-3.
信息：ICS：77.150.10 CCS：H61 发布：2008-06 实施：

DIN EN 754-7-2016(E) 铝和铝合金.冷拉杆材/棒材和管材.第7部分:无缝管的尺寸和形状公差.德文版本EN 754-7-2016
简介：
信息：ICS：77.150.10 CCS：H61 发布：实施：0000-00-00

BS EN 754-8-2016 铝和铝合金.冷拉杆材/棒材和管材.出水孔管材尺寸和形状公差
简介：
信息：ICS：77.150.10 CCS：H61 发布：2016-06-30 实施：2016-06-30

DIN EN 754-1-2008 铝和铝合金.冷拉杆材/棒材和管材.第1部分:检验和交货技术条件
简介：This document specifies the technical conditions for inspection and delivery of aluminium and aluminium alloycold drawn rod/bar and tube for general engineering applications.This document applies to products which are extruded and then cold drawn.This document does not apply to:-- forging stock (EN 603),-- products delivered in coils (EN 13958),-- coiled tubes cut to length (EN 13958).
信息：ICS：77.150.10 CCS：H61 发布：2008-06 实施：

DIN EN 754-7-2008E 铝和铝合金.冷拉杆材/棒材和管材.第7部分:无缝管的尺寸和形状公差.德文版本EN 754-7-2016
简介：
信息：ICS：77.150.10 CCS：H61 发布：实施：0000-00-00

BS EN 754-7-2016 铝和铝合金.冷拉杆材/棒材和管材.无缝管尺寸和形状公差
简介：
信息：ICS：77.150.10 CCS：H61 发布：2016-06-30 实施：2016-06-30

DIN EN 754-5-2008 铝和铝合金.冷拉杆材/棒材和管材.第5部分:矩形棒材的尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawnrectangular bars having thicknesses in the range from 2 mm up to and including 60 mm and widths in therange from 5 mm up to and including 200 mm.The temper designations used in this part are according to EN 515.
信息：ICS：77.150.10 CCS：H61 发布：2008-06 实施：

DIN EN 754-1-2016(E) 铝和铝合金.冷拉杆材/棒材和管材.第1部分:检验和交货技术条件.德文版本EN 754-1-2016
简介：
信息：ICS：77.150.10 CCS：H61 发布：实施：0000-00-00

BS EN 754-1-2016 铝和铝合金.冷拉杆材/棒材和管材.检验和交货用技术条件
简介：
信息：ICS：77.150.10 CCS：H61 发布：2016-03-31 实施：2016-03-31

DIN EN 754-6-2008 铝和铝合金.冷拉杆材/棒材和管材.第6部分:六角形棒材的尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawnhexagonal bars having widths across flats in the range from 3 mm up to and including 80 mm.The temper designations used in this part are according to EN 515.
信息：ICS：77.150.10 CCS：H61 发布：2008-06 实施：

简介： 信息：

DIN EN 754-2-2013 铝和铝合金.冷拉杆材/棒材和管材.第2部分:机械特性.德文版本EN 754-2-2013
简介：
信息：ICS：77.150.10 CCS：H61 发布：2013-12 实施：

BS EN 754-1-2008 铝和铝合金.冷拉杆材/棒材和管材.检验和交货用技术条件
简介：This document specifies the technical conditions for inspection and delivery of aluminium and aluminium alloycold drawn rod/bar and tube for general engineering applications.This document applies to products which are extruded and then cold drawn.This document does not apply to: forging stock (EN 603), products delivered in coils (EN 13958), coiled tubes cut to length (EN 13958).
信息：ICS：77.150.10 CCS：H61 发布：2008-04-30 实施：2008-04-30

简介： 信息：

NF A50-610-2-2013 铝和铝合金.冷拉杆材/棒材和管材.第2部分:机械性能
简介：
信息：ICS：77.150.10 CCS：H61 发布：2013-11-02 实施：2013-11-02

BS EN 754-8-2008 铝和铝合金.冷拉杆材/棒材和管材.出水孔管材尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawnporthole tubes with an outside diameter (OD) from 3 mm to 350 mm (round tube, see Figure 1) or with a crosssection contained within a circumscribing circle (CD) from 8 mm to 300 mm (other than round tube, see Figure2), supplied in straight lengths.This document only applies to cold drawn tube for general engineering applications made in the followingalloys: EN AW-1050A, EN AW-1200; EN AW-3003, EN AW-3103; EN AW-5005, EN AW-5005A, EN AW-5049, EN AW-5251, EN AW-5052; EN AW-6012, EN AW-6060, EN AW-6061, EN AW-6262, EN AW-6262A; EN AW-6063, EN AW-6063A, EN AW-6065, EN AW-6082; EN AW-7020.The temper designations used in this part are according to EN 515.This document only applies to tube produced by the porthole/bridge method of extrusion only (and then colddrawn to the final dimensions).This document does not apply to: cold drawn tubes produced by the seamless, die/mandrel method (EN 754-7), tubes delivered in coils (EN 13958), coiled tubes cut to length (EN 13958).Figure 1 — Round tubeFigure 2 — Circumscribing circle for other than round tube
信息：ICS：77.150.10 CCS：H61 发布：2008-04-30 实施：2008-04-30

简介： 信息：

BS EN 754-2-2013 铝和铝合金. 冷拉杆材/棒材和管材. 机械性能
简介：
信息：ICS：77.150.10 CCS：H61 发布：2013-10-31 实施：2013-10-31

BS EN 754-3-2008 铝和铝合金.冷拉杆材/棒材和管材.圆棒材的尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawnround bars having diameters in the range from 3 mm up to and including 100 mm.The temper designations used in this part are according to EN 515.
信息：ICS：77.150.10 CCS：H61 发布：2008-04-30 实施：2008-04-30

简介： 信息：

ISO 6363-6:2012 锻铝和铝合金.冷拉杆材/棒材,管材和线材.第6部分:拉制圆管.形状公差和尺寸规格
简介：
信息：ICS：23.040.15;77.150.10 CCS：H61 发布：2012-07 实施：

BS EN 754-2-2008 铝和铝合金.冷拉杆材/棒材和管材.机械特性
简介：This document specifies the mechanical property limits resulting from tensile testing applicable to aluminiumand aluminium alloy cold drawn rod/bar and tube.Technical conditions for inspection and delivery, including product and testing requirements, are specified inEN 754-1. Temper designations are defined in EN 515. The chemical composition limits for these materialsare given in EN 573-3.
信息：ICS：77.150.10 CCS：H61 发布：2008-04-30 实施：2008-04-30

简介： 信息：

ISO 6363-3:2012 锻铝和铝合金.冷拉杆材/棒材,管材和线材.第3部分:冷拔圆棒材和线材.形状和尺寸公差(直径上对称正和负偏差)
简介：
信息：ICS：77.150.10 CCS：H61 发布：2012-07 实施：

BS EN 754-4-2008 铝和铝合金.冷拉杆材/棒材和管材.方棒材的尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawnsquare bars having widths across flats from 3 mm up to and including 100 mm.The temper designations used in this part are according to EN 515.
信息：ICS：77.150.10 CCS：H61 发布：2008-04-30 实施：2008-04-30

简介： 信息：

NF A50-610-2-2008 铝和铝合金.冷拉杆材/棒材和管材.第2部分:机械性能
简介：
信息：ICS：77.150.10 CCS：H61 发布：2008-06-01 实施：2008-06-28

BS EN 754-6-2008 铝和铝合金.冷拉杆材/棒材和管材.六角形棒材的尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawnhexagonal bars having widths across flats in the range from 3 mm up to and including 80 mm.The temper designations used in this part are according to EN 515.
信息：ICS：77.150.10 CCS：H61 发布：2008-04-30 实施：2008-04-30

简介： 信息：

NF A50-610-5-2008 铝和铝合金.冷拉杆材/棒材和管材.第5部分:矩形棒材的尺寸和形状公差
简介：
信息：ICS：77.150.10 CCS：H61 发布：2008-06-01 实施：2008-06-28

BS EN 754-7-2008 铝和铝合金.冷拉杆材/棒材和管材.无缝管尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloys colddrawn seamless tubes with an outside diameter (OD) from 3 mm to 350 mm (round tube, see Figure 1) orwith a cross section contained within a circumscribing circle (CD) from 8 mm to 300 mm (other than roundtube, see Figure 2) supplied in straight lengths.This standard only applies to tube produced by the seamless die/mandrel method of extrusion (and then colddrawn to the final dimensions required).The temper designations used in this part are according to EN 515.This document applies to cold drawn, seamless tube for general engineering applications.This document does not apply to: cold drawn tube produced by the porthole/bridge method (EN 754-8), tubes delivered in coils (EN 13958), coiled tubes cut to length (EN 13958).Figure 1 — Round tubeFigure 2 — Circumscribing circle for other than round tube
信息：ICS：77.150.10 CCS：H61 发布：2008-04-30 实施：2008-04-30

简介： 信息：

NF A50-610-6-2008 铝和铝合金.冷拉杆材/棒材和管材.第6部分:六角形棒材的尺寸和形状公差
简介：
信息：ICS：77.150.10 CCS：H61 发布：2008-06-01 实施：2008-06-28

BS EN 754-5-2008 铝和铝合金.冷拉杆材/棒材和管材.矩形棒材尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawnrectangular bars having thicknesses in the range from 2 mm up to and including 60 mm and widths in therange from 5 mm up to and including 200 mm.The temper designations used in this part are according to EN 515.
信息：ICS：77.150.10 CCS：J32;H61 发布：2008-04-30 实施：2008-04-30

简介： 信息：

NF A50-610-1-2008 铝和铝合金.冷拉杆材/棒材和管材.第1部分:检验和交付用技术条件
简介：
信息：ICS：77.150.10 CCS：H61 发布：2008-06-01 实施：2008-06-28

EN 754-6-2008 铝和铝合金.冷拉杆材棒材和管材.第6部分:六角形棒材的尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawn hexagonal bars having widths across flats inThe range from 3 mm up to and including 80 mm.The temper designations used inThis part are according to EN 515.
信息：ICS：77.150.10 CCS：发布：2008-03-01 实施：

简介： 信息：

NF A50-610-4-2008 铝和铝合金.冷拉杆材/棒材和管材.第4部分:方形棒材的尺寸和形状公差
简介：
信息：ICS：77.150.10 CCS：H61 发布：2008-06-01 实施：2008-06-28

EN 754-7-2008 铝和铝合金.冷拉杆材棒材和管材.第7部分:无缝管的尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloys cold drawn seamless tubes with an outside diameter (OD) from 3 mm to 350 mm (round tube, see Figure 1) or with a cross section contained within a circumscribing circle (CD) from 8 mm to 300 mm (other than round tube, see Figure 2) supplied in straight lengths.This standard only applies to tube produced by the seamless die/mandrel method of extrusion (and then cold drawn to the final dimensions required). The temper designations used inThis part are according to EN 515.This document applies to cold drawn, seamless tube for general engineering applications.This document does not apply to: cold drawn tube produced by the porthole/bridge method (EN 754-8), tubes delivered in coils (EN 13958), coiled tubes cut to length (EN 13958). Figure 1-Round tube Figure 2-Circumscribing circle for other than round tube
信息：ICS： CCS：发布：2008-03-01 实施：

简介： 信息：

NF A50-610-3-2008 铝和铝合金.冷拉杆材/棒材和管材.第3部分:圆棒材的尺寸和形状公差
简介：
信息：ICS：77.150.10 CCS：H61 发布：2008-06-01 实施：2008-06-28

EN 754-1-2008 铝和铝合金.冷拉杆材棒材和管材.第1部分:检验和交货技术条件
简介：This document specifies the technical conditions for inspection and delivery of aluminium and aluminium alloy cold drawn rod/bar and tube for general engineering applications.This document applies to products which are extruded and then cold drawn.This document does not apply to: forging stock (EN 603), products delivered in coils (EN 13958), coiled tubes cut to length (EN 13958).
信息：ICS： CCS：发布：2008-03-01 实施：

简介： 信息：

NF A50-610-7-2008 铝和铝合金.冷拉杆材/棒材和管材.第7部分:无缝管的尺寸和形状公差
简介：
信息：ICS：77.150.10 CCS：H61 发布：2008-06-01 实施：2008-06-28

EN 754-4-2008 铝和铝合金.冷拉杆材棒材和管材.第4部分:方形钢的尺寸和形状公差
简介：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawn square bars having widths across flats from 3 mm up to and including 100 mm.The temper designations used inThis part are according to EN 515.
信息：ICS：77.150.10 CCS：发布：2008-03-01 实施：

简介： 信息：