unj内螺纹检测标准unj内螺纹-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

unj内螺纹相关标准参考信息

ASME B1.1-2019 统一英制螺纹（UN、UNR 和 UNJ 螺纹形式）
简介：This Standard specifies the thread form, series, class, allowance, tolerance, and designation for unified screw threads. (In order to emphasize that unified screw threads are based on inch modules, they may be denoted unified inch screw threads.) Several variations in thread form have been developed for unified threads; however, this Standard covers only UN, UNR, and UNJ thread forms.The metric translation of this Standard that was in the 2003 edition has been removed (see Nonmandatory Appendix C). Nonmandatory Appendices D through F contain information that is supplementary to the ections of this Standard.本标准规定了统一螺纹的螺纹形式、系列、等级、余量、公差和型号。（为了强调统一螺纹是基于英制模块的，它们可能表示为统一英制螺纹。已经为统一螺纹开发了几种螺纹形式的变体;但是，本标准仅涵盖UN，UNR和UNJ螺纹形式。2003年版中本标准的公制翻译已被删除（见非强制性附录C）。非强制性附录D至F包含补充本标准的信息。
信息：ICS：21.040.20 CCS：J04 发布：2020-06-30 实施：2020-06-30

NF L24-056-003-2011 航空航天系列.带自扩孔键的自锁紧UNJ螺纹嵌件.第003部分:技术规范.
简介：
信息：ICS：49.030.30 CCS：V20 发布：2011-04-01 实施：2011-04-23

AECMA PREN 4673-005-2009 航空航天系列.带自拉孔键的自锁UNJ螺纹插件.第005部分:耐热镍基合金NI-Ni-P101HT(沃斯帕洛伊合金),镀银.版本P1
简介：
信息：ICS： CCS：发布：2009 实施：

BS ISO 15872-2017 航空航天.UNJ螺纹.测量
简介：
信息：ICS：49.030.10 CCS：V20 发布：2017-03-31 实施：2017-03-31

NF L24-056-005-2011 航空航天系列.带自扩孔键的自锁紧UNJ螺纹嵌件.第005部分:耐热镍基合金NI-P101HT(WASPALOY合金),镀银.
简介：
信息：ICS：49.030.30 CCS：V20 发布：2011-04-01 实施：2011-04-23

AECMA PREN 4673-003-2009 航空航天系列.带自拉孔键的自锁UNJ螺纹插件.第003部分:技术规范.版本P1
简介：
信息：ICS： CCS：发布：2009 实施：

BS ISO 15872-2017 航空航天.UNJ螺纹.测量
简介：
信息：ICS：49.030.10 CCS：V20 发布：2017-03-31 实施：2017-03-31

NF L24-056-006-2011 航空航天系列.带自拉键自锁UNJ螺纹衬垫.第006部分:在耐热FE-PA2601(A286),MoS2镀膜
简介：
信息：ICS：49.030.30 CCS：V20 发布：2011-04-01 实施：2011-04-23

ASD-STAN PREN 4673-006-2009 航空航天系列．带自扩孔键的自锁UNJ螺纹嵌件．第006部分:MoS2涂层的耐热钢FE-PA2601（A286）;第P1版
简介：
信息：ICS： CCS：发布：2009 实施：

ISO 15872:2017 航空航天 - UNJ螺纹 - 测量
简介：
信息：ICS：49.030.10 CCS：发布：2017-03-23 实施：

NF L24-056-004-2011 航空航天系列.带自扩孔键的自锁紧UNJ螺纹嵌件.第4部分:镀银耐热镍基合金Ni-P100HT(铬镍铁合金718).
简介：
信息：ICS：49.030.30 CCS：V20 发布：2011-04-01 实施：2011-04-23

SAE AS 1132H-2008 螺栓、螺钉和螺母.英制外部扳紧UNJ螺纹.设计标准
简介：The scope of this standard is to define the following dimensional requirements for double hexagon, hexagon head and tee headed bolts, and nuts having a minimum tensile strength ranging up to 220 ksi, unless otherwise specified. a. Head dimensions (see 3.1); b. shank dimensions (see 3.2); c. geometric control (see 3.3); d. surface texture (see 3.4); and e. dimensions for nuts (see Section 4). For design calculations the SAE AS 8879 coarse threads, UNJC, shall be used for 0.164 thread sizes, and for smaller thread sizes use fine threads, UNJF. For particulars of thread runout and lead threads for bolts, see SAE AS 3062. NOTE. The ability of a design to achieve a given strength class will ultimately depend on the selected material and the associated processing To establish design requirements for bolts, screws and nuts in the UNJ thread inch series primarily for use on propulsion systems. As defined by the Federal Cataloging System, thread sizes less than 0.190 are referred to as screws and larger sizes are referred to as bolts. For the purpose of this document, the term bolt will be used for all sizes.
信息：ICS：49.030.10;49.030.30 CCS：V20 发布：2008-10-17 实施：

DIN EN 6029-2017 航空航天系列. 单叉UNJ螺纹柄可调连杆端头, 最小啮合量: 1,5螺纹直径, 耐腐蚀钢. 尺寸与载荷. 英制系列; 德文和英文版本EN 6029-2017
简介：
信息：ICS：49.035 CCS：发布：2017-03 实施：

NF L24-056-001-2011 航空航天系列.带自拉键自锁UNJ螺纹衬垫.第001部分:安装和拆除规程
简介：
信息：ICS：49.030.30 CCS：V20 发布：2011-04-01 实施：2011-04-16

SAE AS 3534A-2007 UNS S66286只在THD上镀银的UNJ螺纹带柄自锁紧螺母
简介：(R) NUT, SELF-LOCKING, SHANK, UNS S66286 SILVER PLATE ON THD ONLY, UNJ THREAD
信息：ICS：49.030.30 CCS：V20 发布：2007-07-01 实施：

ISO 15872-2017 航空航天.UNJ螺纹.测量
简介：
信息：ICS：49.030.10 CCS：V04 发布：2017-03 实施：

BS EN 4673-003-2010 航空航天系列.带自扩孔键的自锁紧UNJ螺纹嵌件.技术规范
简介：This European Standard specifies the characteristics, qualification and acceptance requirements for selflockinginserts, self-broaching keys with UNJ threads, for aerospace applications.It is applicable whenever referenced.
信息：ICS：49.030.30 CCS：V20 发布：2011-03-31 实施：2011-03-31

SAE AS 3535A-2007 UNS N07001型镀银UNJ螺纹带柄自锁紧螺母
简介：(R) Nut, Self-Locking, Shank, UNS N07001 Silver Plate, UNJ Thread
信息：ICS：49.030.30 CCS：V20 发布：2007-07-01 实施：

ISO 15872-2017 航空航天.UNJ螺纹.测量
简介：
信息：ICS：49.030.10 CCS：V04 发布：2017-03 实施：

BS EN 4673-005-2010 航空航天系列.带自推销自锁定式UNJ螺纹嵌入插件.第005部分:耐高温镍基合金NI-P101HT(沃斯帕洛伊合金),镀银
简介：This European Standard specifies the characteristics of self-locking, inserts for Inch series, self-broachingkeys, in NI-P101HT, silver plated, for aerospace applications.Classification: 1 210 MPa / 760 °C
信息：ICS：49.030.30 CCS：V20 发布：2010-09-30 实施：2010-09-30

ANSI/ASME B1.3-2007 可接受尺寸规格的螺纹测量系统.英制和公制螺纹(UN,UNR,UNJ,M和MJ)
简介：a) This Standard presents screw thread gaging systems suitable for determining the acceptability of UN, UNR, UNJ, M, and MJ screw threads on externally and internally threaded products. It establishes the criteria for screw thread acceptance when a gaging system is used. b) A screw thread gaging system comprises a list of screw thread characteristics that must be inspected to establish the dimensional acceptability of the screw threads on a threaded product and the gage(s) which shall be used when inspecting those characteristics. c) Federal Government Use. When this Standard is approved by the Department of Defense and federal agencies and is incorporated into FED-STD-H28/20,Screw Thread Standards for Federal Services, Section 20, the use of this Standard by the federal government is subject to all the requirements and limitations of FED-STD-H28/20.
信息：ICS：21.040.01 CCS：J04 发布：2007-03-05 实施：

BS EN 6029-2017 航空航天系列. 单叉UNJ螺纹柄可调连杆端头, 最小啮合量: 1,5螺纹直径, 耐腐蚀钢. 尺寸与载荷. 英制系列
简介：
信息：ICS：49.035 CCS：V22 发布：2017-01-31 实施：2017-01-31

BS EN 4673-001-2010 航空航天系列.带自推销自锁定式UNJ螺纹嵌入插件.第001部分: 安装和拆除规程
简介：This European Standard specifies the installation and removal procedure (hole profile, tools) of self-locking,self-broaching key, UNJ thread inserts defined by EN standards, for aerospace applications.
信息：ICS：49.030.30 CCS：V20 发布：2010-09-30 实施：2010-09-30

ASME B1.3-2007 (2017) 英制和米制(UN、UNR、UNJ、M和MJ)螺纹的尺寸验收用测量系统
简介：
信息：ICS： CCS：发布：2007-01-01 实施：2007-01-01

BS EN 6029-2017 航空航天系列. 单叉UNJ螺纹柄可调连杆端头, 最小啮合量: 1,5螺纹直径, 耐腐蚀钢. 尺寸与载荷. 英制系列
简介：
信息：ICS：49.035 CCS：发布：2017-01-31 实施：2017-01-31

BS EN 4673-004-2010 航空航天系列.带自推销自锁定式UNJ螺纹嵌入插件.第004部分: 耐高温镍基合金NI-P101HT(铬镍铁合金 718),镀银
简介：This European Standard specifies the characteristics of self-locking, inserts for Inch series, self-broachingkeys, in NI-P100HT, silver plated, for aerospace applications.Classification: 1 270 MPa / 600 °C
信息：ICS：49.030.30 CCS：V20 发布：2010-09-30 实施：2010-09-30

ASME B1.3-2007 英制和米制(UN、UNR、UNJ、M和MJ)螺纹的尺寸验收用测量系统
简介：a) This Standard presents screw thread gaging systems suitable for determining the acceptability of UN, UNR, UNJ, M, and MJ screw threads on externally and internally threaded products. It establishes the criteria for screw thread acceptance when a gaging system is used. b) A screw thread gaging system comprises a list of screw thread characteristics that must be inspected to establish the dimensional acceptability of the screw threads on a threaded product and the gage(s) which shall be used when inspecting those characteristics. c) Federal Government Use. When this Standard is approved by the Department of Defense and federal agencies and is incorporated into FED-STD-H28/20,Screw Thread Standards for Federal Services, Section 20, the use of this Standard by the federal government is subject to all the requirements and limitations of FED-STD-H28/20.
信息：ICS：21.040.01 CCS：J42 发布：2007 实施：

EN 6029-2017 航空航天系列-关节轴承,可调,单叉和螺纹杆的最小啮合:UNJ螺纹直径1.5x耐蚀钢的尺寸和载荷-英寸系列
简介：This European Standard specifies the characteristics of adjustable rod ends in corrosion resisting steel, inch series, consisting of: a single fork; a UNJ threaded shank with; min. engagement 1,5 times thread diameter and longitudinal groove for locking purposes. These rod ends are intended for use with control rods or rods for aerospace structures. They shall be used in the temperature range -54 °C and 150 °C.
信息：ICS：49.035 CCS：V11 发布：2017-01 实施：

BS EN 4673-002-2010 航空航天系列.带自推销自锁定式UNJ螺纹嵌入插件.第002部分: 设计标准
简介：This European Standard specifies the applications and installation hole dimensions for EN standard, selflocking,self-broaching key, UNJ threads inserts and provisions for component salvage, for aerospaceapplications.
信息：ICS：49.030.30 CCS：V20 发布：2010-09-30 实施：2010-09-30

SAE AS 5878-2005 UNS N07001、1400 uoF、180,000 psi、UNJ螺纹、镍合金制自锁紧螺母的采购规范
简介：This specification establishes the requirements for the following types of self-locking nuts in thread diameter sizes 0.1380 through 0.6250 inches:
信息：ICS：49.030.30 CCS：V20 发布：2005-06-01 实施：

SAE AS 3273A-2014 螺母.带钉扣和锯齿柄的自锁,1200℉,镀银,UNS S66286 UNJ螺纹
简介：Scope is unavailable.
信息：ICS：49.030.30 CCS：J13 发布：2014-01-07 实施：

EN 4673-002-2010 航空航天系列.插件,UNJ螺纹,自锁,具有自拉床键
简介：This European Standard specifies the applications and installation hole dimensions for EN standard, self-locking, self-broaching key, UNJ threads inserts and provisions for component salvage, for aerospace applications.
信息：ICS：49.030.30 CCS：发布：2010-08-01 实施：

SAE AS 8879D-2004 螺纹.增加内径的尺寸可控的圆角半径的UNJ型材
简介：This SAE Aerospace Standard (AS) specifies the characteristics of screw threads - UNJ profile inch series, including a mandatory controlled radius as specified in Table 1 at the root of the external thread. The minor diameter of both external and internal threads provides a basic thread height of .5625H to accommodate the external thread maximum root radius. The following detailed design requirements are included: a. Screw threads - UNJ basic profile and design profiles. b. Standard series of diameter-pitch combinations for nominal thread diameters from 0.060 to 6.000 inches. c. Standard thread classes and form tolerances. d. Formulae for thread dimensions and tolerances. e. Method of designating UNJ threads. f. Tables for selected diameter-pitch combinations for close tolerance mechanical thread applications. g. Tables for screw thread - UNJ profile thread limit dimensions. This document specifies the geometric design for each characteristic of screw threads - UNJ profile inch series and the conformance requirements. In addition, the purpose of this standard is to: a. Define the geometric requirements for a selected series of Unified Screw Threads, modified to provide a radius at the external thread root. b. Establish requirements for a continuous radius at the root of the external threads. c. Establish requirements for an increase in the minor diameter of both internal and external threads to accommodate the external thread root radius.
信息：ICS：49.030.20 CCS：V22 发布：2004-08-01 实施：

SAE AS 3272A-2014 螺母.自锁带钉扣和锯齿柄、700℉、干燥的薄膜包衣、UNS S66286、UNJ螺纹
简介：Scope is unavailable.
信息：ICS：49.030.30 CCS：J13 发布：2014-01-07 实施：

EN 4673-005-2010 航空航天系列.带自推销自锁定式UNJ螺纹嵌入插件.第005部分:耐高温镍基合金
简介：This European Standard specifies the characteristics of self-locking, inserts for Inch series, self-broaching keys, in NI-P101HT, silver plated, for aerospace applications. Classification: 1210 MPa / 760 ℃.
信息：ICS：49.030.30 CCS：发布：2010-08-01 实施：

SAE AS 3505A-2004 FSC 5340长的自锁薄壁嵌件,1025℉,镀银,UNS N07718,UNJ螺纹
简介：Insert - Thin Wall, Long Self-Locking 1025 Degrees F, Silver Plated UNS N07718, UNJ Thread FSC 5340
信息：ICS：49.035 CCS：V20 发布：2004-03-01 实施：

SAE AS 3566A-2013 UNJ 16齿节螺纹形状的UNS G41300或者UNS G43400有效力矩构造如城的自锁螺母
简介：Scope is unavailable.
信息：ICS：49.030.30 CCS：发布：2013-10-04 实施：

EN 4673-006-2010 航空航天系列.插件,UNJ螺纹,自锁,具有自拉床键
简介：This European Standard specifies the characteristics of self-locking, inserts for Inch series, self-broaching keys, in FE-PA2601, MoS2 coated, for aerospace applications. Classification: 900 Mpa/315 ℃.
信息：ICS：49.030.30 CCS：发布：2010-08-01 实施：

SAE AS 3504A-2004 FSC 5340短的自锁薄壁嵌件,1025℉,镀银,UNS N07718,UNJ螺纹
简介：Insert - Thin Wall, Short Self-Locking, 1025 Degrees F, Silver Plated UNS N07718, UNJ Thread FSC 5340
信息：ICS：49.030.30 CCS：V20 发布：2004-03-01 实施：

SAE AS 4958A-2013 UNJ 16齿节螺纹形状的有效力矩构造如城的自锁螺母性能
简介：This document covers all metal, castellated, self-locking nuts made from alloy steel of the types identified under the Unified Numbering System as UNS G41300 and UNS G43400.
信息：ICS：49.030.30 CCS：发布：2013-10-04 实施：

EN 4673-004-2010 航空航天系列.插件,UNJ螺纹,自锁,带自拉床按键 - 第004部分：耐热镍基合金NIP100HT（铬镍铁合金718）,镀银
简介：This European Standard specifies the characteristics of self-locking, inserts for Inch series, self-broaching keys, in NI-P100HT, silver plated, for aerospace applications. Classification: 1270 MPa / 600 ℃.
信息：ICS：49.030.30 CCS：发布：2010-08-01 实施：

KS W ISO 3161-2002(2018) 航空航天UNJ螺纹一般要求和极限尺寸
简介：
信息：ICS：49.030.10 CCS：发布：2002-12-27 实施：

SAE AS 3477B-2013 自锁螺母.带UNJ螺纹的镀银扩展垫圈双六角头UNS S66286
简介：
信息：ICS：49.030.30 CCS：V20 发布：2013-07-16 实施：

AECMA PREN 4673-001-2009 航空航天系列.带自拉孔键的自锁UNJ螺纹插件.第001部分:安装和移除程序.版本P1
简介：
信息：ICS： CCS：发布：2009 实施：

KS W ISO 3161-2002 航空航天.UNJ螺纹.通用要求和限制尺寸
简介：이 규격은 항공 우주 구조물에 사용되는 골밑 반지름이 규정된 인치 계열 UNJ 나사에 대한
信息：ICS：49.030.10 CCS：V20 发布：2002-12-27 实施：2002-12-27

SAE AS 3505B-2012 嵌件.薄壁镀银,1025℉,长自锁定式,内表面上仅UNS N07718, UNJ螺纹
简介：
信息：ICS：49.035 CCS：V20 发布：2012-10-22 实施：

AECMA PREN 4673-006-2009 航空航天系列.带自拉孔键的自锁UNJ螺纹插件.第006部分:耐热钢FE- PA2601(A286),MoS2涂料.版本P1
简介：
信息：ICS： CCS：发布：2009 实施：

SAE AS 3504B-2012 嵌件.薄壁镀银,1025℉,短自锁定式,内表面上仅UNS N07718, UNJ螺纹
简介：
信息：ICS：49.030.30 CCS：V20 发布：2012-10-22 实施：

ASD-STAN PREN 4673-004-2009 航空航天系列．带自扩孔键的自锁UNJ螺纹嵌件．第004部分:镀银耐热镍基合金Ni-P100HT（铬镍铁合金 718）;第P1版
简介：
信息：ICS： CCS：发布：2009 实施：

BS ISO 15872-2002 航空航天.UNJ螺纹.测量
简介：This International Standard gives information for the gauging of ISO UNJ threads complying with ISO 3161. Other methods of ensuring that the product is within the specified limits may be used, provided correlation with the specified gauges is established [see 8.2.e)].
信息：ICS：49.030.10 CCS：V20 发布：2002-12-13 实施：2002-12-13

DIN EN 4673-005-2011 航空航天系列.带自扩孔键的自锁紧UNJ螺纹嵌件.第004部分:镀银耐热镍基合金NI-P100HT(镍基高温合金);德文和英文版本EN 4673-005-2010
简介：
信息：ICS：49.030.30 CCS：V20 发布：2011-05 实施：

AECMA PREN 4673-004-2009 航空航天系列.带自拉孔键的自锁UNJ螺纹插件.第004部分:耐热镍基合金NI-P100HT(INCONEL718),镀银.版本P1
简介：
信息：ICS： CCS：发布：2009 实施：

ISO 15872:2002 航空和航天；UNJ螺纹——测量
简介：
信息：ICS：49.030.10 CCS：发布：2002-11-22 实施：

DIN EN 4673-004-2011 航空航天系列.带自扩孔键的自锁紧UNJ螺纹嵌件.第004部分:镀银耐热镍基合金NI-P100HT(铬镍铁合金718);德文和英文版本EN 4673-004-2010
简介：
信息：ICS：49.030.30 CCS：V20 发布：2011-05 实施：

ISO 15872-2002 航空航天.UNJ螺纹.测量
简介：This International Standard gives information for the gauging of ISO UNJ threads complying with ISO 3161.Other methods of ensuring that the product is within the specified limits may be used, provided correlation with the specified gauges is established [see 8.2.e)].
信息：ICS：49.030.10 CCS：V04 发布：2002-11 实施：

ASD-STAN PREN 4673-002-2009 航空航天系列．带自扩孔键的自锁紧UNJ螺纹嵌件．第002部分:设计标准;第P1版
简介：
信息：ICS： CCS：发布：2009 实施：

SAE AS 4393B-2001 FSC 5310 UNJ螺纹1200℉和160,000 psi UNS S66286自锁螺母
简介：This specification establishes the requirements for the following types of self-locking nuts: a. wrenching nuts: i.e., hexagon and double hexagon nuts and b. anchor nuts: i.e., plate nuts, gang channel nuts, and shank nuts. The wrenching nuts, shank nuts, and nut elements of plate and gang channel nuts are made of corrosion and heat resistant precipitation hardenable iron base alloy of the type identified under the Unified Numbering System as UNS S66286 and of 160 000 psi axial tensile strength at room temperature, with maximum conditioning temperature of parts at 1200 degrees F prior to room temperature testing.
信息：ICS：49.030.30 CCS：V20 发布：2001 实施：