iec61058-1检测标准

发布时间：2023-03-16 01:07:50 • 阅读量： • 来源：中析研究所

iec61058-1相关标准参考信息

DIN EN IEC 61058-2-1-2021
简介：This International Standard applies to cord switches (mechanical or electronic) for appliances actuated by hand, by foot or by other human activity, to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceedin
信息：ICS：29.120.40 CCS：发布：2021-11-00 实施：2021-11-01

IEC 61058-1 (REDLINE + STANDARD)-2016
简介："This part of IEC 61058 applies to switches for appliances The switches are intended to control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding480 V and a rated current not exceeding 63 A. Switches for appliances are intended to be operated by ?C a person via an actuating member@ ?C indirect actuation@ ?C an actuating sensing unit Transmission of a signal between the actuating member or sensing unit and the switch may be connected by optical@ acoustic@ thermal@ electrical or other relevant connection and may include remote controlled units. This part of IEC 61058 applies to switches for appliances provided with additional control functions governed by the switch provided with electronic circuits and devices that are necessary for the intended and/or correct operation of the switch. This part of IEC 61058 applies to circuitry when evaluated with a switch and necessary for the switching function. This part of IEC 61058 applies in general to switches for appliances in conjunction with the following parts: ?C Part 1-1: Requirements for mechanical switches@ and/or ?C Part 1-2: Requirements for electronic switches. This part of IEC 61058 does not apply to devices covered by: ?C IEC 60669 (all parts)@ Switches for household and similar fixed-electrical installations@ and ?C IEC 60730 (all parts)@ Automatic electrical controls. This part of IEC 61058 does not contain requirements for safety isolating switches (IEC 60050-811:1991@ 811-29-17). NOTE 1 For switches used in tropical climates@ additional requirements may be necessary. NOTE 2 Attention is drawn to the fact that the end product standards for appliances may contain additional or alternative requirements for switches. NOTE 3 Throughout this part of IEC 61058@ the word ""appliance"" means ""appliance or equipment""."
信息：ICS：/ CCS：/ 发布：2016-07-01 实施：2016-07-22

DIN EN 61058-2-1-2011 设备开关.第2-1部分:拉线开关的详细要求(IEC 61058-2-1-2010).德文版本EN 61058-2-1-2011
简介：
信息：ICS：29.120.40 CCS：K31 发布：2011-08 实施：2011-08-01

PN-EN IEC 61058-2-1-2021-06 E
简介：
信息：ICS：29.120.40 CCS：发布：2021-06-25 实施：2021-06-25

IEC 61058-1-2016 电器开关.第1部分:一般要求
简介：
信息：ICS：29.120.40 CCS：K31 发布：2016-07 实施：

IEC 61058-2-1:2010 电器开关 - 第2-1部分:电缆开关的特殊要求
简介：
信息：ICS：29.120.40 CCS：发布：2010-11-29 实施：

LST EN IEC 61058-2-1-2021
简介：
信息：ICS：29.120.40 CCS：发布：2021-04-15 实施：2021-04-15

IEC 61058-1-2:2016 电器开关 - 第1-2部分:电子开关的要求
简介：
信息：ICS：29.120.40 CCS：发布：2016-05-25 实施：

IEC 61058-2-1-2010 Interrupteurs pour appareils – Partie 2-1: Règles particulières pour les interrupteurs pour c?bles souples (Edition 2.0)
简介："This clause of Part 1 is applicable except as follows: Replacement: This International Standard applies to cord switches (mechanical or electronic) for appliances actuated by hand@ by foot or by other human activity@ to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 250 V and a rated current not exceeding 16 A. These switches are intended to be operated by a person@ via an actuating member or by actuating a sensing unit. The actuating member or sensing unit can be integral or arranged separately from the switch. The transmission of a signal between the actuating member or sensing unit and the switch may be made either physically or electrically (for example electrical@ optical@ acoustic or thermal). Switches which incorporate additional control functions governed by the switch function are within the scope of this standard. This standard also covers the indirect actuation of the switch when the operation of the actuating member or sensing unit is provided by a remote control or a part of an appliance or equipment such as a door. NOTE 1 Electronic switches may be combined with mechanical switches giving full disconnection or microdisconnection. NOTE 2 Electronic switches without a mechanical switch in the supply circuit provide only electronic disconnection. Therefore@ the circuit on the load side is always considered to be live. NOTE 3 For switches used in tropical climates@ additional requirements may be necessary. NOTE 4 Attention is drawn to the fact that the standards for appliances may contain additional or alternative requirements for switches. NOTE 5 Throughout this standard@ the word ""appliance"" means ""appliance or equipment"". Replacement: This standard applies to switches intended to be connected to a flexible cable."" NOTE In this document@ the word ""cable"" means ""cable or cord"". This subclause applies. This subclause does not apply."
信息：ICS：/ CCS：/ 发布：2010-11-01 实施：2018-06-20

BS EN IEC 61058-2-1-2021
简介：
信息：ICS：29.120.40 CCS：发布：2021-02-10 实施：2021-02-10

IEC 61058-1-2-2016 电器开关 - 第1-2部分:电子开关的要求
简介：
信息：ICS：29.120.40 CCS：发布：2016-05-25 实施：

IEC 61058-2-1-2010 开关器具.第2-1部分:拉线开关的详细要求
简介：This clause of Part 1 is applicable except as follows:1.1 Replacement:1.1 This International Standard applies to cord switches (mechanical or electronic) forappliances actuated by hand, by foot or by other human activity, to operate or controlelectrical appliances and other equipment for household or similar purposes with a ratedvoltage not exceeding 250 V and a rated current not exceeding 16 A.These switches are intended to be operated by a person, via an actuating member or byactuating a sensing unit. The actuating member or sensing unit can be integral or arrangedseparately from the switch. The transmission of a signal between the actuating member orsensing unit and the switch may be made either physically or electrically (for exampleelectrical, optical, acoustic or thermal).Switches which incorporate additional control functions governed by the switch function arewithin the scope of this standard.This standard also covers the indirect actuation of the switch when the operation of theactuating member or sensing unit is provided by a remote control or a part of an applianceor equipment such as a door.NOTE 1 Electronic switches may be combined with mechanical switches giving full disconnection or microdisconnection.NOTE 2 Electronic switches without a mechanical switch in the supply circuit provide only electronic disconnection.Therefore, the circuit on the load side is always considered to be live.NOTE 3 For switches used in tropical climates, additional requirements may be necessary.NOTE 4 Attention is drawn to the fact that the standards for appliances may contain additional or alternativerequirements for switches.NOTE 5 Throughout this standard, the word “appliance” means “appliance or equipment”.1.2 Replacement:1.2 This standard applies to switches intended to be connected to a flexible cable."NOTE In this document, the word “cable” means “cable or cord”.1.3 This subclause applies.1.4 This subclause does not apply.
信息：ICS：29.120.40 CCS：K31 发布：2010-11 实施：2010-11

DS/EN IEC 61058-2-1-2021
简介：
信息：ICS：29.120.40 CCS：发布：2021-02-09 实施：2021-02-09

IEC 61058-1-1:2016 电器开关 - 第1-1部分:机械开关的要求
简介：
信息：ICS：29.120.40 CCS：发布：2016-05-25 实施：

VDE 0630-1 BERICHTIGUNG 1-2009 Switches for appliances - Part 1: General requirements (IEC 61058-1:2000@ modified + A1:2001 + A2:2007); German version EN 61058-1:2002 + A2:2008@ Corrigendum to DIN EN 61058-1 (VDE 0630-1):2008-09
简介：
信息：ICS：/ CCS：/ 发布：2009-07-01 实施：2016-06-25

EN IEC 61058-2-1-2021
简介：
信息：ICS： CCS：发布：2021-02-01 实施：

IEC 61058-1-2-2016 Switches for appliances – Part 1-2: Requirements for electronic switches (Edition 1.0)
简介："This International Standard applies to switches (mechanical or electronic) for appliances actuated by hand@ by foot or by other human activity@ to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 480 V and a rated current not exceeding 63 A. These switches are intended to be operated by a person@ via an actuating member or by actuating a sensing unit. The actuating member or sensing unit can be integral with or arranged separately@ either physically or electrically@ from the switch and may involve transmission of a signal@ for example electrical@ optical@ acoustic or thermal@ between the actuating member or sensing unit and the switch. Switches which incorporate additional control functions governed by the switch function are within the scope of this standard. This standard also covers the indirect actuation of the switch when the operation of the actuating member or sensing unit is provided by a remote control or a part of an appliance or equipment such as a door. NOTE 1 Electronic switches may be combined with mechanical switches giving full disconnection or microdisconnection. NOTE 2 Electronic switches without a mechanical switch in the supply circuit provide only electronic disconnection. Therefore@ the circuit on the load side is always considered to be live. NOTE 3 For switches used in tropical climates@ additional requirements may be necessary. NOTE 4 Attention is drawn to the fact that the standards for appliances may contain additional or alternative requirements for switches. NOTE 5 Throughout this standard@ the word ""appliance"" means ""appliance or equipment"". NOTE 6 This part of IEC 61058 is applicable when testing incorporated switches. When other types of switches for appliances are tested@ this part is applicable together with the relevant Part 2 of IEC 61058. This part of IEC 61058 may@ however@ be applied for other types of switches which are not mentioned in a relevant Part 2 of IEC 61058@ provided that the electrical safety is not disregarded. This standard applies to switches intended to be incorporated in@ on or with an appliance. This standard also applies to switches incorporating electronic devices. This standard also applies to switches for appliances such as ?C switches intended to be connected to a flexible cable (cord switches) for which@ however@ particular requirements are given in IEC 61058-2-1; NOTE In this document@ the word ""cable"" means ""cable or cord"". ?C switches integrated in an appliance (integrated switches); ?C switches intended to be mounted separately from the appliance (independently mounted switches) other than those within the scope of IEC 60669-1@ for which@ however@ particular requirements are given in IEC 61058-2-4; ?C change-over selectors for which@ however@ particular requirements are given in IEC 61058-2-5. This standard does not contain requirements for isolating switches. This standard does not apply to devices which control appliances and equipment not actuated intentionally by a person. These are covered by IEC 60730. This part of IEC 61058 applies to electronic switching devices and shall be used in conjunction with the general requirements of IEC 61058-1. NOTE Additional requirements for particular switches may be found in the relevant part 2 of IEC 61058."
信息：ICS：/ CCS：/ 发布：2016-05-01 实施：2016-05-27

DIN EN 61058-1 Berichtigung 1-2009 设备开关.第1部分:一般要求(IEC 61058-1-2000修订版+A1-2001+A2-2007).德文版本EN 61058-1-2002 + A2-2008,DIN EN 61058-1 (VDE 0630-1)-2008-09勘误表
简介：
信息：ICS：29.120.40 CCS：K31 发布：2009-07 实施：

DIN EN IEC 61058-1-2018 电器开关. 第1-1部分: 机械开关的要求 (IEC 61058-1:2016); 德文版本 EN IEC 61058-1-2018
简介：This part of IEC 61058 applies to switches for appliances. The switches are intended to control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 480 V and a rated current not exceeding 63 A. Switches for appliances are intended to be operated by - a person via an actuating member, - indirect actuation, - an actuating sensing unit.
信息：ICS：29.120.40 CCS：K31 发布：2018-08-01 实施：

IEC 61058-1-1-2016 Switches for appliances – Part 1-1: Requirements for mechanical switches (Edition 1.0)
简介：This part of IEC 61058 applies to mechanical switching devices and shall be used in conjunction with the requirements of IEC 61058-1. NOTE Additional requirements for particular switches may be found in the relevant part 2 of IEC 61058
信息：ICS：/ CCS：/ 发布：2016-05-01 实施：2016-05-27

IEC 61058-1 CORR 1-2009 Interrupteurs pour appareils – Partie 1: Règles générales CORRIGENDUM 1 (Edition 3.0)
简介：This International Standard applies to switches (mechanical or electronic) for appliances actuated by hand@ by foot or by other human activity@ to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 440 V and a rated current not exceeding 63 A.?
信息：ICS：/ CCS：/ 发布：2009-01-01 实施：2016-07-22

VDE 0630-1-2018 Switches for appliances - Part 1: General requirements (IEC 61058-1:2016); German version EN IEC 61058-1:2018
简介：
信息：ICS：/ CCS：/ 发布：2018-08-01 实施：2018-08-01

IEC 61058-1-1-2016 电器开关.第1-1部分:机械开关的要求
简介：This clause of part 1 is applicable. Add the following at the end of Clause 1. This part of IEC 61058 applies to mechanical switching devices and shall be used in conjunction with the requirements of IEC 61058-1. NOTE Additional requirements for particular switches may be found in the relevant part 2 of IEC 61058.
信息：ICS：29.120.40 CCS：K31 发布：2016-05 实施：

IEC 61058-1 Corrigendum 1-2009 设备用开关.第1部分:一般要求.技术勘误1
简介：
信息：ICS：29.120.40 CCS：K31 发布：2009-01 实施：

IEC 61058-2-1:2018 电器开关 - 第2-1部分:电缆开关的特殊要求
简介：
信息：ICS：29.120.40 CCS：发布：2018-06-18 实施：

KS C IEC 61058-1-2012(2017) 电器开关第1部分:一般要求
简介：
信息：ICS：29.120.40 CCS：发布：2012-12-27 实施：

VDE 0630-1-2008 Switches for appliances - Part 1: General requirements (IEC 61058-1:2000@ modified + A1:2001 + A2:2007); German version EN 61058-1:2002 + A2:2008
简介：
信息：ICS：/ CCS：/ 发布：2008-09-01 实施：2016-06-25

IEC 61058-2-1-2018 开关器具.第2-1部分:拉线开关的详细要求
简介：Clause 1 of IEC 61058-1:2016 is applicable except as follows: Addition: This document applies to cord switches (mechanical or electronic) for appliances actuated by hand, by foot or by other human activity, to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 250 V and a rated current not exceeding 16 A. Throughout this document, the word "appliance" means "appliance or equipment". These switches are intended to be operated by a person, via an actuating member or by actuating a sensing unit. The actuating member or sensing unit can be integral or arranged separately from the switch. The transmission of a signal between the actuating member or sensing unit and the switch can be made either physically or electrically (for example, electrical, optical, acoustic or thermal). Switches which incorporate additional control functions governed by the switch function are within the scope of this document. This document also covers the indirect actuation of the switch when the operation of the actuating member or sensing unit is provided by a remote control or a part of an appliance such as a door. NOTE 1 Electronic switches can be combined with mechanical switches giving full disconnection or micro-disconnection. NOTE 2 Electronic switches without a mechanical switch in the supply circuit provide only electronic disconnection. Therefore, the circuit on the load side is always considered to be live. NOTE 3 For switches used in tropical climates, additional requirements can apply. NOTE 4 Attention is drawn to the fact that the standards for appliances can contain additional or alternative requirements for switches.
信息：ICS：29.120.40 CCS：K31 发布：2018-06-01 实施：

KS C IEC 61058-2-1-2012(2017) 电器开关第2-1部分:软线开关的特殊要求
简介：
信息：ICS：29.120.40 CCS：发布：2012-12-27 实施：

DIN EN 61058-1-2008 器具用开关.第1部分:一般要求(修改的IEC 61058-1-2000＋A1:2001＋A2:2007)
简介：
信息：ICS：29.120.40 CCS：K31 发布：2008-09 实施：2008-09-01

IEC 61058-2-1-2018 Switches for appliances – Part 2-1: Particular requirements for cord switches (Edition 3.0)
简介："This part of IEC 61058 applies to switches for appliances. The switches are intended to control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 480 V and a rated current not exceeding 63 A. Switches for appliances are intended to be operated by ?C a person via an actuating member@ ?C indirect actuation@ ?C an actuating sensing unit. Transmission of a signal between the actuating member or sensing unit and the switch may be connected by optical@ acoustic@ thermal@ electrical or other relevant connection and may include remote controlled units. This part of IEC 61058 applies to switches for appliances provided with additional control functions governed by the switch provided with electronic circuits and devices that are necessary for the intended and/or correct operation of the switch. This part of IEC 61058 applies to circuitry when evaluated with a switch and necessary for the switching function. This part of IEC 61058 applies in general to switches for appliances in conjunction with the following parts: ?C Part 1-1: Requirements for mechanical switches@ and/or ?C Part 1-2: Requirements for electronic switches. This part of IEC 61058 does not apply to devices covered by: ?C IEC 60669 (all parts)@ Switches for household and similar fixed-electrical installations@ and ?C IEC 60730 (all parts)@ Automatic electrical controls. This part of IEC 61058 does not contain requirements for safety isolating switches (IEC 60050-811:1991@ 811-29-17). NOTE 1 For switches used in tropical climates@ additional requirements may be necessary. NOTE 2 Attention is drawn to the fact that the end product standards for appliances may contain additional or alternative requirements for switches. NOTE 3 Throughout this part of IEC 61058@ the word ""appliance"" means ""appliance or equipment"". This document applies to cord switches (mechanical or electronic) for appliances actuated by hand@ by foot or by other human activity@ to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 250 V and a rated current not exceeding 16 A. Throughout this document@ the word ""appliance"" means ""appliance or equipment"". These switches are intended to be operated by a person@ via an actuating member or by actuating a sensing unit. The actuating member or sensing unit can be integral or arranged separately from the switch. The transmission of a signal between the actuating member or sensing unit and the switch can be made either physically or electrically (for example@ electrical@ optical@ acoustic or thermal). Switches which incorporate additional control functions governed by the switch function are within the scope of this document. This document also covers the indirect actuation of the switch when the operation of the actuating member or sensing unit is provided by a remote control or a part of an appliance such as a door. NOTE 1 Electronic switches can be combined with mechanical switches giving full disconnection or microdisconnection. NOTE 2 Electronic switches without a mechanical switch in the supply circuit provide only electronic disconnection. Therefore@ the circuit on the load side is always considered to be live. NOTE 3 For switches used in tropical climates@ additional requirements can apply. NOTE 4 Attention is drawn to the fact that the standards for appliances can contain additional or alternative requirements for switches."
信息：ICS：/ CCS：/ 发布：2018-06-01 实施：2018-06-20

KS C IEC 61058-2-1-2012 设备开关.第2-1部分:拉线开关的特殊要求
简介：다음 사항을 제외하고 제1부의 이 항을 적용한다.1.1 수정:1.1 이 표준
信息：ICS：29.120.40 CCS：K40 发布：2012-12-27 实施：2012-12-27

IEC 61058-1:2000+AMD1:2001+AMD2:2007 CSV 电器开关第1部分:一般要求
简介：
信息：ICS：29.120.40 CCS：发布：2008-04-16 实施：

EN IEC 61058-1-2018
简介：
信息：ICS：29.120.40 CCS：发布：2018-05-01 实施：

KS C IEC 61058-2-1-2012(2022) 电器开关第2-1部分:电线开关的特殊要求
简介：
信息：ICS：29.120.40 CCS：发布：2012-12-27 实施：

IEC 61058-1-2000+AMD1-2001+AMD2-2007 CSV 电器开关第1部分:一般要求
简介：
信息：ICS：29.120.40 CCS：发布：2008-04-16 实施：

VDE 0630-2-1-2017 Switches for appliances - Part 2-1: Particular requirements for cord switches (IEC 23J/432/CDV:2017); German version prEN 61058-2-1:2017
简介：
信息：ICS：/ CCS：/ 发布：2017-11-01 实施：2017-11-01

KS C IEC 61058-1-2012 设备开关.第1部分:通用要求
简介：1.1 이 표준은 정격 전압 480 V 이하, 정격 전류 63 A 이하이고, 가정용 및 이
信息：ICS：29.120.40 CCS：K40 发布：2012-12-27 实施：2012-12-27

IEC 61058-1-2008 Interrupteurs pour appareils – Partie 1: Règles générales (Edition 3.2; Consolidated Reprint)
简介：This International Standard applies to switches (mechanical or electronic) for appliances actuated by hand@ by foot or by other human activity@ to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 440 V and a rated current not exceeding 63 A.?
信息：ICS：/ CCS：/ 发布：2008-04-01 实施：2016-07-22

DIN EN 61058-1-2-2017 电器开关.第1-2部分:电子开关要求(IEC 61058-1-2-2016);德文版本EN 61058-1-2-2016
简介：
信息：ICS：29.120.40 CCS：K31 发布：2017-04 实施：

KS C IEC 61058-1-2012(2022) 电器开关第1部分:一般要求
简介：
信息：ICS：29.120.40 CCS：发布：2012-12-27 实施：

IEC 61058-1 Edition 3.2-2008 电器开关.第1部分:一般要求
简介：1.1 This International Standard applies to switches (mechanical or electronic) for appliances actuated by hand, by foot or by other human activity, to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 480 V and a rated current not exceeding 63 A.These switches are intended to be operated by a person, via an actuating member or byactuating a sensing unit. The actuating member or sensing unit can be integral with orarranged separately, either physically or electrically, from the switch and may involvetransmission of a signal, for example electrical, optical, acoustic or thermal, between the actuating member or sensing unit and the switch.Switches which incorporate additional control functions governed by the switch function are within the scope of this standard.This standard also covers the indirect actuation of the switch when the operation of theactuating member or sensing unit is provided by a remote control or a part of an appliance or equipment such as a door.NOTE 1 Electronic switches may be combined with mechanical switches giving full disconnection or microdisconnection.NOTE 2 Electronic switches without a mechanical switch in the supply circuit provide only electronic disconnection. Therefore, the circuit on the load side is always considered to be live.NOTE 3 For switches used in tropical climates, additional requirements may be necessary.NOTE 4 Attention is drawn to the fact that the standards for appliances may contain additional or alternative requirements for switches.NOTE 5 Throughout this standard, the word "appliance" means "appliance or equipment".NOTE 6 This part of IEC 61058 is applicable when testing incorporated switches. When other types of switches for appliances are tested, this part is applicable together with the relevant Part 2 of IEC 61058.This part of IEC 61058 may, however, be applied for other types of switches which are not mentioned in a relevantPart 2 of IEC 61058, provided that the electrical safety is not disregarded.1.2 This standard applies to switches intended to be incorporated in, on or with an appliance.1.3 This standard also applies to switches incorporating electronic devices.1.4 This standard also applies to switches for appliances such as– switches intended to be connected to a flexible cable (cord switches) for which, however, particular requirements are given in IEC 61058-2-1;NOTE In this document, the word "cable" means "cable or cord".– switches integrated in an appliance (integrated switches);– switches intended to be mounted separately from the appliance (independently mountedswitches) other than those within the scope of IEC 60669-1, for which, however, particularrequirements are given in IEC 61058-2-4;– change-over selectors for which, however, particular requirements are given inIEC 61058-2-5.1.5 This standard does not contain requirements for isolating switches.1.6 This standard does not apply to devices which control appliances and equipment notactuated intentionally by a person. These are covered by IEC 60730.
信息：ICS：29.120.40 CCS：K31 发布：2008-04 实施：

VDE 0630-1-1-2017 Switches for appliances - Part 1-1: Requirements for mechanical switches (IEC 61058-1-1:2016); German version EN 61058-1-1:2016
简介：
信息：ICS：/ CCS：/ 发布：2017-02-01 实施：2017-01-25

IEC 61058-1-2000/AMD2-2007 修改件2.电器开关.第1部分:一般要求
简介：
信息：ICS：29.120.40 CCS：发布：2007-11-27 实施：

DIN EN 61058-1-1-2017 电器开关..第1-1部分:机械开关要求(IEC 61058-1-1-2016);德文版本EN 61058-1-1-2016
简介：
信息：ICS：29.120.40 CCS：K31 发布：2017-02 实施：

GOST IEC 61058-1-2012 器具开关. 第1部分. 通用要求
简介：
信息：ICS：29.120.40 CCS：发布：2012 实施：2014-07-01

IEC 61058-1:2000/AMD2:2007 修改件2.电器开关.第1部分:一般要求
简介：
信息：ICS：29.120.40 CCS：发布：2007-11-27 实施：

IEC 61058-1:2016 电器开关 - 第1部分:一般要求
简介：
信息：ICS：29.120.40 CCS：发布：2016-07-20 实施：

GOST IEC 61058-2-1-2012 器具开关. 第2-1部分. 拉线开关的特殊要求
简介：
信息：ICS：29.120.40 CCS：发布：2012 实施：2014-07-01

IEC 61058-1 AMD 2-2007 Amendment 2 Interrupteurs pour appareils – Partie 1: Règles générales (Edition 3.0)
简介：This International Standard applies to switches (mechanical or electronic) for appliances actuated by hand@ by foot or by other human activity@ to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 440 V and a rated current not exceeding 63 A.?
信息：ICS：/ CCS：/ 发布：2007-11-01 实施：2008-04-22

IEC 61058-1-2016 RLV 电器开关第1部分:一般要求
简介：
信息：ICS：29.120.40 CCS：发布：2016-07-20 实施：

VDE 0630-1 BERICHTIGUNG 2-2011 Switches for appliances - Part 1: General requirements (IEC 61058-1:2000@ modified + A1:2001 + A2:2007); German version EN 61058-1:2002 + A2:2008@ Corrigendum to DIN EN 61058-1 (VDE 0630-1):2008-09
简介：
信息：ICS：/ CCS：/ 发布：2011-10-01 实施：2016-06-25

IEC 61058-1 AMD 2-2007 设备用开关.第1部分:一般要求.修改件2
简介：This standard is about Switches for appliances - Part 1: General requirements; Amendment 2
信息：ICS：29.120.40 CCS：K31 发布：2007-11 实施：

IEC 61058-1:2016 RLV 电器开关第1部分:一般要求
简介：
信息：ICS：29.120.40 CCS：发布：2016-07-20 实施：

DIN EN 61058-1 Berichtigung 2-2011 家用电器用开关装置.第1部分:通用要求(修改版IEC 61058-1-2000 + A1-2001 + A2-2007);德文版本EN 61058-1-2002 + A2-2008,DIN EN 61058-1 (VDE 0630-1)-2008-09的技术勘误表
简介：
信息：ICS：29.120.40 CCS：K31 发布：2011-10 实施：

CSA C22.2 NO 61058-1-05-2005 器具开关.第1部分:通用要求.第1版.IEC 61058-1:2000,MOD
简介：This is the common CSA and UL standard for Switches for Appliances. It is the first edition ofCAN/CSA-C22.2 No. 61058-1-05, and the third edition of UL 61058-1. This edition of UL 61058-1 willsupersede the second edition of UL 61058-1A published in 20
信息：ICS： CCS：K31 发布：2005-09-30 实施：

VDE 0630-2-1-2011 Switches for appliances - Part 2-1: Particular requirements for cord switches (IEC 61058-2-1:2010); German version EN 61058-2-1:2011
简介：
信息：ICS：/ CCS：/ 发布：2011-08-01 实施：2016-06-25

IEC 61058-2-4 AMD 1-2003 电器开关.第2-4部分:针对独立安装开关的特殊要求.修改件1
简介：This is Amendment 1 to IEC 61058-2-4-1995 (Switches for appliances -Part 2-4:Particular requirements for independently mounted switches)
信息：ICS：29.120.40 CCS：K31 发布：2003-02 实施：