荣誉资质图片

cma资质(CMA)     CNAS资质(CNAS)     iso体系(ISO) 高新技术企业(高新技术企业)

标准的适用性相关标准参考信息

ASTM D8146-22 评估试验方法能力和适用性的标准指南
简介:
信息:ICS:75.080 CCS发布:2022-11-01 实施

ASTM D8104-17 确定涂层质量测试数据的标准指南适用性
简介:
信息:ICS:27.120.20 CCS发布:2017-03-01 实施

CFR 40-60.280a-2014 环境保护. 第60部分:新固定标准的性能来源. 第60.280a节:适用性和指定设施的影响.
简介:(a) The provisions of this subpart are applicable to the following affected facilities in kraft pulp mills: digester system, brown stock washer system, multiple-effect evaporator system, recovery furnace, smelt dissolving tank, lime kiln and condensate st
信息:ICSCCS发布:2014-04-04 实施:2014-04-04

ISO/TR 7262-2022 天然气.煤层气质量标志和ISO/TC 193现行标准的适用性
简介:
信息:ICS:75.060 CCS发布:2022-01-10 实施

ASTM D6024/D6024M-16 控制低强度材料(CLSM)中球滴的标准测试方法 以确定负载应用的适用性
简介:
信息:ICS:91.100.01 CCS发布:2016-12-01 实施

CFR 40-60.280-2014 环境保护. 第60部分:新固定标准的性能来源. 第60.280节:适用性和指定设施的影响.
简介:(a) The provisions of this subpart are applicable to the following affected facilities in kraft pulp mills: Digester system, brown stock washer system, multiple-effect evaporator system, recovery furnace, smelt dissolving tank, lime kiln, and condensate s
信息:ICSCCS发布:2014-04-04 实施:2014-04-04

T/CECS G:V50-02-2021 公路无人机系统飞行平台适用性标准
简介:本标准分为6章和1个附录,主要内容包括:1总则、2术语、3系统组成、4飞行平台、5传输平台、6飞行云控平台、附录本标准用词用语说明。
信息:ICS:93.080.01 CCS:E481 发布:2021-10-29 实施:2022-01-14

ASTM D6024/D6024M-16 控制低强度材料(CLSM)中球滴的标准测试方法 以确定负载应用的适用性
简介:
信息:ICS:91.100.01 CCS:/ 发布:2016-12-01 实施:0000-00-00

CFR 12-252.131-2014 银行和银行业务. 第252部分:加强审慎标准(条例YY). 第M子部分:合并资产总额至少100亿美元但不足500亿美元的上市外国银行机构的风险委员会要求. 第252.131节:适用性.
简介:(a) General applicability. Subject to the initial applicability provisions of paragraph (c) of this section, a foreign banking organization with total consolidated assets of at least $10 billion but less than $50 billion and any class of stock (or similar interest) that is publicly traded must comply with the risk-committee requirements set forth in this subpart beginning on the first day of the ninth quarter following the later of the date on which its total consolidated assets equal or exceed $10 billion and the date on which any class of its stock (or similar interest) becomes publicly traded.
信息:ICSCCS:A11 发布:2014-03-27 实施:2014-03-27

ASTM D7720-21 使用油分析监测设备和油的适用性和污染时统计评估测量报警限值的标准指南
简介:
信息:ICS:25.040.40 CCS发布:2021-10-01 实施

ASTM E2989-15a 用于建筑规范的火灾测试报告的持续适用性评估标准指南
简介:
信息:ICS:13.220.99 CCS发布:2015-08-01 实施

CFR 40-63.1420-2014 环境保护. 第63部分:有害空气污染物排放源类别的国家排放标准. 第63.1420节:适用性和指定来源的影响.
简介:(a) Definition of affected source. Theprovisions of this subpart apply to eachaffected source. Affected sources are described in paragraphs (a)(1) through(4) of this section.
信息:ICSCCS发布:2014-03-27 实施:2014-03-27

ASTM E2989-19a 建筑规范中使用的防火试验报告反应持续适用性评估的标准指南
简介:
信息:ICS:13.220.99 CCS发布:2019-12-15 实施

ASTM D6024/D6024M-15 控制低强度材料(CLSM)中球滴的标准测试方法 以确定负载应用的适用性
简介:
信息:ICS:91.100.01 CCS发布:2015-07-01 实施

CFR 12-252.121-2014 银行和银行业务. 第252部分:加强审慎标准(条例YY). 第L子部分:合并资产总额超过100亿美元不足500亿美元的外国银行组织和外国储蓄和贷款控股公司的公司运行压力测试要求. 第252.121节:适用性.
简介:(a) Applicability for foreign banking organizations with total consolidated assets of more than $10 billion but less than $50 billion—(1) General applicability. Subject to the initial applicability provisions of paragraph (a)(3) of this section, a foreign banking organization must comply with the stress test requirements set forth in this section beginning on the first day of the ninth quarter following the date on which its total consolidated assets exceed $10 billion.
信息:ICSCCS:A11 发布:2014-03-27 实施:2014-03-27

ASTM E2320-19 热环境和室内空气条件办公设施的适用性标准分类
简介:
信息:ICS:91.140.30 CCS发布:2019-11-15 实施

ASTM E2989-15 用于建筑规范的火灾测试报告的持续适用性评估标准指南
简介:
信息:ICS:13.220.99 CCS发布:2015-02-01 实施

CFR 40-63.1360-2014 环境保护. 第63部分:有害空气污染物排放源类别的国家排放标准. 第63.1360节:适用性.
简介:(a) Definition of affected source. The affected source subject to this subpart is the facility-wide collection of pes-ticide active ingredient manufacturing process units (PAI process units) that process, use, or produce HAP, and are located at a plant
信息:ICSCCS发布:2014-03-27 实施:2014-03-27

ASTM E1679-13(2019) 确定建筑物或建筑物相关设施的适用性要求的标准做法 以及确定提供或建议的适用性
简介:
信息:ICS:91.040.20 CCS发布:2019-10-01 实施

ASTM E2989-2015 评定建筑法规中使用防火试验报告持续适用性的标准指南
简介:5.1x00a0;This guide identifies concepts for assessing the continued applicability of fire test reports used in building regulation. It provides guidance to users and requesters of fire test reports, developed in accordance with the fire response test standards, such as those from ASTM, UL, or NFPA, to determine the continued applicability of a fire test report for regulatory use. 5.2x00a0;This guide assumes that a fire test report generated by a test laboratory represents the performance of the material or product in accordance with a fire test standard identified in the report at the time a specific material or product was tested. 5.3x00a0;This guide is not designed to assist in determining the continued applicability of a material or product that is listed, labeled, or given in an evaluation report. 5.4x00a0;This guide is not designed to assist in determining whether a test laboratory conducted the test reference in the fire test report in accordance with a standard test protocol. 5.5x00a0;This guide is not designed to assist in determining whether the fire test laboratory issuing a fire test report met the requirements of competence of testing and calibration methods.4 5.6x00a0;This guide is not designed to assist in determining the applicability of a fire test report with respect to the measurement uncertainty developed in accordance with Guide E2536. 5.7x00a0;Do not consider issuance of a new edition with only editorial changes (as notated in ASTM by x201c;epsilon,x201d; x201c;editorially revised,x201d; or x201c;reapprovedx201d;) as a new edition containing a technical change. 1.1x00a0;This guide contains concepts that provide guidance for assessing the continued applicability of fire response test reports of materials or products used in building regulation. 1.2x00a0;This guide provides guidance for sponsors and users of fire test reports on the continued applicability of fire test reports. This guide is intended to identify conditions that may cause a fire test report which was valid when prepared to no longer be an appropriate tool upon which decisions about the materials or products can be based. 1.3x00a0;Application of this guide is dependent on the technical changes in the fire test standard that could impact the test results and thus the classification of the material or product. Application of this guide will be better facilitated when fire test standards include explicit documentation of significant historical technical changes. 1.4x00a0;This guide does not address fire test reports relating to fire resistance tests. 1.5x00a0;The determination of the validity of a fire test report is outside the scope of this guide.
信息:ICSCCS发布:2015 实施

CFR 12-252.31-2014 银行和银行业务. 第252部分:加强审慎标准(条例YY). 第D子部分:加强合并资产总额500亿美元或更多的银行控股公司的审慎标准. 第252.31节:适用性.
简介:(a) General applicability. Subject to the initial applicability provisions of paragraphs (c) and (e) of this section, a bank holding company must comply with the risk-management and risk-committee requirements set forth in § 252.33 and the liquidity risk-management and liquidity stress test requirements set forth in §§ 252.34 and 252.35 beginning on the first day of the fifth quarter following the date on which its total consolidated assets equal or exceed $50 billion.
信息:ICSCCS:A11 发布:2014-03-27 实施:2014-03-27

ASTM E2989-19 建筑规范中使用的防火试验报告反应持续适用性评估的标准指南
简介:
信息:ICS:13.220.99 CCS发布:2019-05-01 实施

ASTM E2989-2015a 评定建筑法规中使用防火试验报告持续适用性的标准指南
简介:5.1x00a0;This guide identifies concepts for assessing the continued applicability of fire test reports used in building regulation. It provides guidance to users and requesters of fire test reports, developed in accordance with the fire response test standards, such as those from ASTM, UL, or NFPA, to determine the continued applicability of a fire test report for regulatory use. 5.2x00a0;This guide assumes that a fire test report generated by a test laboratory represents the performance of the material or product in accordance with a fire test standard identified in the report at the time a specific material or product was tested. 5.3x00a0;This guide is not designed to assist in determining the continued applicability of a material or product that is listed, labeled, or given in an evaluation report. 5.4x00a0;This guide is not designed to assist in determining whether a test laboratory conducted the test reference in the fire test report in accordance with a standard test protocol. 5.5x00a0;This guide is not designed to assist in determining whether the fire test laboratory issuing a fire test report met the requirements of competence of testing and calibration methods.4 5.6x00a0;This guide is not designed to assist in determining the applicability of a fire test report with respect to the measurement uncertainty developed in accordance with Guide E2536. 5.7x00a0;Do not consider issuance of a new edition with only editorial changes (as notated in ASTM by x201c;epsilon,x201d; x201c;editorially revised,x201d; or x201c;reapprovedx201d;) as a new edition containing a technical change. 1.1x00a0;This guide contains concepts that provide guidance for assessing the continued applicability of fire response test reports of materials or products used in building regulation. 1.2x00a0;This guide provides guidance for sponsors and users of fire test reports on the continued applicability of fire test reports. This guide is intended to identify conditions that may cause a fire test report which was valid when prepared to no longer be an appropriate tool upon which decisions about the materials or products can be based. 1.3x00a0;Application of this guide is dependent on the technical changes in the fire test standard that could impact the test results and thus the classification of the material or product. Application of this guide will be better facilitated when fire test standards include explicit documentation of significant historical technical changes. 1.4x00a0;This guide does not address fire test reports relating to fire resistance tests. 1.5x00a0;The determination of the validity of a fire test report is outside the scope of this guide.
信息:ICSCCS发布:2015 实施

CFR 12-252.142-2014 银行和银行业务. 第252部分:加强审慎标准(条例YY). 第N子部分:加强合并资产总额500亿美元或更多但结合美国资产不足500亿美元的外国银行组织的审慎标准. 第252.142节:适用性.
简介:(a) General applicability. Subject to the initial applicability provisions in paragraph (c) of this section, a foreign banking organization with total consolidated assets of $50 billion or more and combined U.S. assets of less than $50 billion must comply with the capital requirements, risk-management and risk committee requirements, liquidity risk-management requirements, and the capital stress testing requirements set forth in this subpart beginning on the first day of the ninth quarter following the date on which its total consolidated assets equal or exceed $50 billion.
信息:ICSCCS:A11 发布:2014-03-27 实施:2014-03-27

ASTM D8194-18 用于测定航空涡轮燃料中颗粒污染物的37&x2009;mm过滤器监视器和47&x2009;mm过滤器适用性评估的标准实施规程
简介:
信息:ICS:75.160.20 CCS发布:2018-12-01 实施

ASTM D6024/D6024M-2015 采用球落在可控制的低强度材料 (CLSM) 上的方法测定荷载应用适用性的标准试验方法
简介:5.1x00a0;This test method is used primarily as a field test to determine the readiness of the CLSM to accept loads prior to adding a temporary or permanent wearing surface. 5.2x00a0;This test method is not meant to predict the load bearing strength of a CLSM mixture. 5.3x00a0;This test is one of a series of quality control tests that can be performed on CLSM during construction to monitor compliance with specification requirements. The other tests that can be used during construction control are Test Methods D4832, D6023, and D6103. Note 1:x00a0;The quality of the result produced by this standard is dependent on the competence of the personnel performing it, and the suitability of the equipment and facilities used. Agencies that meet the criteria of Practice D3740 are generally considered capable of competent and objective testing/sampling/inspection/and the like. Users of this standard are cautioned that compliance with Practice D3740 does not in itself assure reliable results. Reliable results depend on many factors; Practice D3740 provides a means of evaluating some of those factors. 1.1x00a0;This test method explains the determination of the ability of Controlled Low Strength Material (CLSM) to withstand loading by repeatedly dropping a metal weight onto the in-place material. 1.2x00a0;All observed and calculated values shall conform to the guidelines for significant digits and rounding established in Practice D6026. 1.2.1x00a0;The procedures used to specify how data are collected/recorded and calculated in the standard are regarded as the industry standard. In addition, they are representative of the significant digits that generally should be retained. The procedures used do not consider material variation, purpose for obtaining the data, special purpose studies, or any considerations for the userx2019;s objectives; and it is common practice to increase or reduce significant digits of reported data to be commensurate with these considerations. It is beyond the scope of these test methods to consider significant digits used in analysis methods for engineering data. 1.3x00a0;Unitsx2014;The values stated in either SI units or inch-pound units presented in brackets are to be regarded separately as standard. The values stated in each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4x00a0;CLSM is also known as flowable fill, controlled density fill, soil-cement slurry, soil-cement grout, unshrinkable fill, x201c;K-Krete,x201d; and other similar names. 1.5x00a0;This standard does not purport to address all of the safety conce......
信息:ICS:91.100.01 CCS发布:2015 实施

CFR 12-252.152-2014 银行和银行业务. 第252部分:加强审慎标准(条例YY). 第O子部分:加强合并资产总额500亿美元或更多和结合美国资产到500亿美元或更多的外国银行组织的审慎标准. 第252.152节:适用性.
简介:(a) General applicability. Subject to the initial applicability provisions in paragraph (c) of this section, a foreign banking organization must:
信息:ICSCCS:A11 发布:2014-03-27 实施:2014-03-27

ASTM D8194-18e1 用于测定航空涡轮燃料中颗粒污染物的37&x2009;mm过滤器监视器和47&x2009;mm过滤器适用性评估的标准实施规程
简介:
信息:ICS:75.160.20 CCS发布:2018-12-01 实施

CFR 14-36.1-2014 航空与航天. 第36部分:噪声标准:飞机类型和适航认证. 第A子部分:总则. 第36.1节:适用性和定义.
简介:(a) This part prescribes noise standards for the issue of the following certificates:
信息:ICSCCS:V36 发布:2014-11-04 实施:2014-11-04

CFR 40-63.1310-2014 环境保护. 第63部分:有害空气污染物排放源类别的国家排放标准. 第63.1310节:适用性和指定来源的影响.
简介:(a) Definition of affected source. The provisions of this subpart apply to each affected source. Affected sources are described in paragraphs (a)(1) through (a)(4) of this section.
信息:ICSCCS发布:2014-03-27 实施:2014-03-27

ASTM E1666-95a(2018) 办公设施在正常时间或条件之外工作的适用性的标准分类
简介:
信息:ICS:35.260 CCS发布:2018-03-01 实施

CFR 12-252.53-2014 银行和银行业务. 第252部分:加强审慎标准(条例YY). 第F子部分:合并资产总额500亿美元或更多的银行控股公司和由董事会监督的非银行金融公司的公司运行压力测试. 第252.53节:适用性.
简介:(a) Scope—(1) Applicability. Except as provided in paragraph (b) of this section, this subpart applies to any covered company, which includes:
信息:ICSCCS:A11 发布:2014-10-27 实施:2014-10-27

CFR 12-252.21-2014 银行和银行业务. 第252部分:加强审慎标准(条例YY). 第C子部分:合并资产总额100亿美元或更高,不超过500亿美元的上市银行控股公司风险委员会的要求. 第252.21节:适用性.
简介:(a) General applicability. Subject to the initial applicability provisions of paragraph (c) of this section, a bank holding company with any class of stock that is publicly traded must comply with the risk-committee requirements set forth in this subpart beginning on the first day of the ninth quarter following the later of the date on which its total consolidated assets equal or exceed $10 billion and the date on which any class of its stock becomes publicly traded.
信息:ICSCCS:A11 发布:2014-03-27 实施:2014-03-27

ASTM E1660-95a(2018) 办公室设施支持办公室工作的适用性标准分类
简介:
信息:ICS:35.260 CCS发布:2018-03-01 实施

CFR 12-252.13-2014 银行和银行业务. 第252部分:加强审慎标准(条例YY). 第B子部分:某些合并资产总额超过100亿美元,不到500亿美元的美国银行机构公司运营压力的测试要求. 第252.13节:适用性.
简介:(a) Scope—(1) Applicability. Except as provided in paragraph (b) of this section, this subpart applies to:
信息:ICSCCS:A11 发布:2014-10-27 实施:2014-10-27

CFR 40-63.144-2014 环境保护. 第63部分:国家有害空气污染物排放标准的来源类别. 第63.144:过程废水规定-测试方法和程序确定适用性和2组1 /组决定(决定哪些废水流需要控制).
简介:(a) Procedures to determine applica-bility. An owner or operator shall com-ply with paragraph (a)(1) or (a)(2) of this section for each wastewater stream to determine which wastewater streams require control for Table 8 and/ or Table 9 compounds. The own
信息:ICSCCS发布:2014-02-27 实施:2014-02-27

ASTM E1665-95a(2018) 设施保护办公设施的适用性标准分类
简介:
信息:ICS:35.260 CCS发布:2018-03-01 实施

CFR 12-252.43-2014 银行和银行业务. 第252部分:加强审慎标准(条例YY). 第E子部分:合并资产总额500亿美元或更多的银行控股公司和由董事会监督的非银行金融公司的监管压力测试要求. 第252.43节:适用性.
简介:(a) Scope—(1) Applicability. Except as provided in paragraph (b) of this section, this subpart applies to any covered company, which includes:
信息:ICSCCS:A11 发布:2014-10-27 实施:2014-10-27

CFR 40-60.660-2014 环境保护. 第60部分:新固定标准的性能来源. 第60.660节:适用性和指定设施的影响.
简介:(a) The provisions of this subpart apply to each affected facility designated in paragraph (b) of this section that is part of a process unit that produces any of the chemicals listed in § 60.667 as a product, co-product, byproduct, or intermediate, excep
信息:ICSCCS发布:2014-02-27 实施:2014-02-27

ASTM E2320-04(2018) 热环境和室内空气条件办公设施的适用性标准分类
简介:
信息:ICS:91.140.30 CCS发布:2018-03-01 实施

CFR 12-249.1-2014 银行和银行业务. 第249部分:流动性风险衡量标准(条例WW). 第A子部分:总则. 第249.1节:目的和适用性.
简介:(a) Purpose. This part establishes a minimum liquidity standard for certain Board-regulated institutions on a consolidated basis, as set forth herein.
信息:ICSCCS:A11 发布:2014-10-10 实施:2014-10-10

ASTM E1679-13 确定建筑物或建筑物相关设施的适用性要求的标准做法 以及确定提供或建议的适用性
简介:
信息:ICS:91.040.20 CCS发布:2013-10-01 实施

ASTM E1694-95a(2018) 办公设施的特殊设施和技术的适用性标准分类
简介:
信息:ICS:35.260 CCS发布:2018-03-01 实施

CFR 12-249.60-2014 银行和银行业务. 第249部分:流动性风险衡量标准(条例WW). 第G子部分:某些银行控股公司的流动性覆盖率. 第249.60节:适用性.
简介:(a) Scope. This subpart applies to a covered depository institution holding company domiciled in the United States that has total consolidated assets equal to $50 billion or more, based on the average of the Board-regulated institution’s four most recent FR Y–9Cs (or, if a savings and loan holding company is not required to report on the FR Y–9C, based on the average of its estimated total consolidated assets for the most recent four quarters, calculated in accordance with the instructions to the FR Y–9C) and does not meet the applicability criteria set forth in § 249.1(b).
信息:ICSCCS:A11 发布:2014-10-10 实施:2014-10-10

CFR 12-252.153-2013 银行和银行业务. 第252部分:强化审慎标准(YY号规章). 第252.153节:适用性.
简介:(a) Compliance date for bank holding companies and state member banks that meet the asset threshold on or before December 31, 2012-(1) Bank holding companies-(i) In general. Except as provided in paragraph (a)(1)(ii) of this section, a bank holding company that meets the asset threshold on or before December 31, 2012, must comply with the requirements of this subpart beginning with the stress test cycle that commences on October 1, 2013, unless that time is extended by the Board in writing.
信息:ICSCCS发布:2013-09-30 实施:2013-09-30

ASTM E1661-95a(2018) 办公设施会议和集体效力的适用性标准分类
简介:
信息:ICS:35.260 CCS发布:2018-03-01 实施

CFR 12-329.1-2014 银行和银行业务. 第329部分:流动性风险定量标准. 第A子部分:总则. 第329.1节:目的和适用性.
简介:(a) Purpose. This part establishes a minimum liquidity standard for certain FDIC-supervised institutions on a consolidated basis, as set forth herein.
信息:ICSCCS:A11 发布:2014-10-10 实施:2014-10-10

CFR 12-252.133-2013 银行和银行业务. 第252部分:强化审慎标准(YY号规章). 第252.133节:适用性.
简介:(a) Compliance date for bank holding companies that are covered companies as of November 15,2012—(1) In general. Except as provided in paragraph (a)(2) or (3) of this section, a bank holding company that is a covered company as of November 15, 2012, must comply with the requirements of this subpart beginning with the stress test cycle that commences on October 1, 2013, unless that time is extended by the Board in writing.
信息:ICSCCS发布:2013-09-30 实施:2013-09-30

ASTM E1667-95a(2018) 办公设施对公众和居民形象的适用性的标准分类
简介:
信息:ICS:35.260 CCS发布:2018-03-01 实施

CFR 12-50.1-2014 银行和银行业务. 第50部分:流动性风险测量标准. 第A子部分:总则. 第50.1节:目的和适用性.
简介:(a) Purpose. This part establishes a minimum liquidity standard for certain national banks and Federal savings associations on a consolidated basis, as set forth herein.
信息:ICSCCS:A11 发布:2014-10-10 实施:2014-10-10

CFR 12-252.143-2013 银行和银行业务. 第252部分:强化审慎标准(YY号规章). 第252.143节:适用性.
简介:(a) Compliance date for bank holding companies that are covered companies as of November 15, 2012-(1) In general. Except as provided in paragraph (a)(2) or (3) of this section, a bank holding company that is a covered company as of November 15, 2012, must comply with the requirements of this subpart beginning with the stress test cycle commencing on October 1, 2013, unless that time is extended by the Board in writing.
信息:ICSCCS发布:2013-09-30 实施:2013-09-30

ASTM E1668-95a(2018) 用于吸引和留住员工的办公设施的适用性标准分类
简介:
信息:ICS:35.260 CCS发布:2018-03-01 实施

CFR 12-3.1-2014 银行和银行业务. 第3部分:资本充足率标准. 第A子部分:总则. 第3.1节:目的,适用性,预订的权威和时间.
简介:(a) Purpose. This part establishes minimum capital requirements and overall capital adequacy standards for national banks or Federal savings associations. This part includes methodologies for calculating minimum capital requirements, public disclosure requirements related to the capital requirements, and transition provisions for the application of this part.
信息:ICSCCS:A11 发布:2014-09-26 实施:2014-09-26

CFR 20-718.2-2013 员工利益. 第718部分:为确定尘肺导致煤矿工总的残疾或死亡的标准. 第718.2节:这部分的适用性.
简介:(a) With the exception of the second sentence of § 718.204(a), this part is applicable to the adjudication of all claims filed on or after June 30, 1982 under Part C of the Act. It provides standards for establishing entitlement to benefits under the Act
信息:ICSCCS发布:2013-09-25 实施:2013-09-25

ASTM E1662-95a(2018) 声视觉环境办公设施的适用性标准分类
简介:
信息:ICS:35.260 CCS发布:2018-03-01 实施

CFR 45-170.501-2014 公共福利. 第170部分:卫生信息技术标准;实施规范和认证标准和认证计划的医疗信息技术. 第170.501节:适用性.
简介:This subpart establishes the processes that applicants for ONC–ACB status must follow to be granted ONC–ACB status by the National Coordinator;the processes the National Coordinator will follow when assessing applicants and granting ONC–ACB status;the requirements that ONC–ACBs must follow to maintain ONC–ACB status;and the requirements of ONC–ACBs for certifying Complete EHRs, EHR Module(s), and other types of HIT in accordance with the applicable certification criteria adopted by the Secretary in subpart C of this part. It also establishes the processes accreditation organizations must follow to request approval from the National Coordinator and that the National Coordinator in turn will follow to approve an accreditation organization under the ONC HIT Certification Program as well as certain ongoing responsibilities for an ONC–AA.
信息:ICSCCS发布:2014-09-11 实施:2014-09-11

ASTM E1700-2013 办公设备对结构和建筑物包封的适用性标准分类
简介:4.1x00a0;Each Facility Rating Scale in this classification (see Figs. 1-6) provides a means to estimate the level of serviceability of a building or facility for one topic of serviceability, and to compare that level against the level of any other building or facility. 4.2x00a0;This classification can be used for comparing how well different buildings or facilities meet a particular requirement for serviceability. It is applicable despite differences such as location, structure, mechanical systems, age, and building shape. 4.3x00a0;This classification can be used to estimate the amount of variance of serviceability from target or from requirement, for a single office facility, or within a group of office facilities. 4.4x00a0;This classification can be used to estimate the following: 4.4.1x00a0;Serviceability of an existing facility for uses other than its present use. 4.4.2x00a0;Serviceability (potential) of a facility that has been planned but not yet built. 4.4.3x00a0;Serviceability (potential) of a facility for which a remodeling has been planned. 4.5x00a0;Use of this classification does not result in building evaluation or diagnosis. Building evaluation or diagnosis generally requires a special expertise in building engineering or technology, and the use of instruments, tools, or measurements. 4.6x00a0;This classification applies only to facilities that are building constructions, or parts thereof. (While this classification may be useful in rating the serviceability of facilities that are not building constructions, such facilities are outside the scope of this classification.) 1.1x00a0;This classification covers pairs of scales (see Figs. 1-6) for classifying an aspect of the serviceability of an office facility, that is, the capability of an office facility to meet certain possible requirements for structure and building envelope. 1.2x00a0;Within that aspect of serviceability, each pair of scales (see Figs. 1-6) are for classifying one topic of serviceability. Each paragraph in an Occupant Requirement Scale summarizes one level of serviceability on that topic, which occupants might require. The matching entry in the Facility Rating Scale is a translation of the requirement into a description of certain features of a facility which, taken in combination, indicate that the facility is likely to meet that level of required serviceability. 1.3x00a0;The entries in the Facility Rating Scale (se......
信息:ICS:35.260 (Office machines) CCS:Y54 发布:2013 实施

LS/T 6402-2017 粮油检验 设备和方法标准适用性验证及结果评价一般原则
简介:本标准规定了进行粮油检测设备和方法的标准适用性验证及结果评价的一般原则,包括术语和定义、验证评价方法类型、验证评价样品选择、评价方法等内容。本标准适用于粮油检测设备和方法的标准适用性验证评价。
信息:ICS:19.020 CCS:B04 发布:2017-10-27 实施:2017-12-20

CFR 48-22.402-2014 联邦采购法规体系. 第22部分:劳动法律在政府收购上的应用. 第22.4子部分:涉及到建设的劳工标准合同. 第22.402节:适用性.
简介:(a) Contracts for construction work.?(1) The requirements of this subpart apply—
信息:ICSCCS:A10 发布:2014-04-29 实施:2014-04-29

NF C99-100/A1-2012 产品标准 - 通话人暴露于电磁场 (300 MHz - 3 GHz) 有基本限制的移动电话适用性验证.
简介:
信息:ICS:33.070.01;33.100.01 CCS发布:2012-08-01 实施:2012-08-04

我们的实力

我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力

部分实验仪器

实验仪器 实验仪器 实验仪器 实验仪器

合作客户

我们的实力

注意:因业务调整,暂不接受个人委托测试望见谅。