预制涵洞检测标准

发布时间：2023-03-14 03:29:55 • 阅读量： • 来源：中析研究所

预制涵洞相关标准参考信息

ASTM C1433M-22 涵洞、雨水道和下水道用预制钢筋混凝土整体箱形截面（米制）
简介：
信息：ICS：23.040.50 CCS：发布：2022-09-01 实施：

ASTM C1433M-16 标准规范涵洞雨水渠和下水道预制钢筋混凝土整体箱形截面（公制）
简介：
信息：ICS：23.040.50 CCS：发布：2016-01-15 实施：

ASTM C1504M-2015e1 涵洞, 暴雨排水沟用预制钢筋混凝土三边构件制造的标准规范 (米制)
简介：1.1x00a0;This specification covers single-cell precast conventionally reinforced concrete three-sided structures intended to be used for the construction of culverts and for the conveyance of storm water. 1.2x00a0;This specification is the metric counterpart of Specification C1504; therefore, no imperial (metric) equivalents are presented in this specification. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. The successful performance of this product depends upon the proper selection of the geometric section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete three-sided structure specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the geometric section specified and provisions for inspection at the construction site are required. 1.3x00a0;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
信息：ICS：23.040.50 CCS：发布：2015 实施：

DB43/T 757-2022 预制装配式钢筋混凝土涵洞
简介：
信息：ICS：93.060 CCS：P28 发布：2022-01-29 实施：2022-04-29

ASTM C1433-2016 涵洞, 暴雨排水沟和下水道所用的预制钢筋混凝土整体方形管的标准规格
简介：1.1x00a0;This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water industrial wastes and sewage. 1.2x00a0;This specification is the companion to SI Specification C1433M; therefore, no SI equivalents are shown in this specification. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. However, standard designs are included and the criteria used to develop these designs are given in Appendix X1. The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the box section specified, and provision for inspection at the construction site, are required.
信息：ICS：23.040.50 CCS：发布：2016 实施：

ASTM C1577-2015a 符合AASHTO LRFD设计要求的涵洞, 暴雨排水沟和下水道所用的预制钢筋混凝土整体方形管的标准规格
简介：1.1x00a0;This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water, industrial wastes and sewage. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. However, standard designs per the AASHTO LRFD Bridge Design Specifications are included and the criteria used to develop these designs are given in Appendix X1. The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the box section specified, and provision for inspection at the construction site, are required. 1.2x00a0;The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
信息：ICS：91.100.30;93.030 CCS：发布：2015 实施：

DB63/T 1979-2021 预制装配式涵洞工程施工技术规范
简介：
信息：ICS：93.080.10 CCS：P28 发布：2021-12-01 实施：2022-01-01

ASTM C1433M-2016 涵洞, 暴雨排水沟和下水道所用的预制钢筋混凝土整体方形管的标准规格 (公制)
简介：1.1x00a0;This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water industrial wastes and sewage. 1.2x00a0;This specification is the SI companion to Specification C1433. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. However, standard designs are included and the criteria used to develop these designs are given in Appendix X1. The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that he must properly correlate the loading conditions and the field requirements with the box section specified and provide for inspection at the construction site.
信息：ICS：23.040.50 CCS：发布：2016 实施：

ASTM C1577-2015b 符合AASHTO LRFD设计要求的涵洞, 暴雨排水沟和下水道所用的预制钢筋混凝土整体方形管的标准规格
简介：1.1x00a0;This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water, industrial wastes and sewage. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. However, standard designs per the AASHTO LRFD Bridge Design Specifications are included and the criteria used to develop these designs are given in Appendix X1. The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the box section specified, and provision for inspection at the construction site, are required. 1.2x00a0;The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
信息：ICS：91.100.30 CCS：发布：2015 实施：

ASTM C1885-21 顶管用圆形预制混凝土涵洞、雨水管和污水管的标准规范
简介：
信息：ICS： CCS：发布：2021-12-01 实施：

ASTM C1433M-2016b 涵洞, 暴雨排水沟和下水道所用的预制钢筋混凝土整体方形管的安装的标准规格(米制)
简介：1.1x00a0;This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water industrial wastes and sewage. 1.2x00a0;This specification is the SI companion to Specification C1433. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. However, standard designs are included and the criteria used to develop these designs are given in Appendix X1. The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that he must properly correlate the loading conditions and the field requirements with the box section specified and provide for inspection at the construction site.
信息：ICS：23.040.50 CCS：Q14 发布：2016 实施：

ASTM C1504-2015 涵洞, 暴雨排水沟用预制钢筋混凝土三边构件制造的标准规范
简介：1.1x00a0;This specification covers single-cell precast conventionally reinforced concrete three-sided structures intended to be used for the construction of culverts and for the conveyance of storm water. 1.2x00a0;A complete metric companion to Specification C1504 has been developedx2014;C1504M; therefore, no metric equivalents are presented in this specification. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. The successful performance of this product depends upon the proper selection of the geometric section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete three-sided structure specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the geometric section specified and provisions for inspection at the construction site are required. 1.3x00a0;The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
信息：ICS：23.040.50 CCS：发布：2015 实施：

DB63/T 1978-2021 公路预制装配式涵洞设计规范
简介：
信息：ICS：93.080.10 CCS：P28 发布：2021-12-01 实施：2022-01-01

ASTM C1433-2016a 涵洞, 暴雨排水沟和下水道所用的预制钢筋混凝土整体方形管的标准规格
简介：1.1x00a0;This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water industrial wastes and sewage. 1.2x00a0;This specification is the companion to SI Specification C1433M; therefore, no SI equivalents are shown in this specification. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. However, standard designs are included and the criteria used to develop these designs are given in Appendix X1. The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the box section specified, and provision for inspection at the construction site, are required.
信息：ICS：23.040.50 CCS：发布：2016 实施：

ASTM C1504M-14 涵洞和雨水沟用预制钢筋混凝土三面结构的制造标准规范&40；公制和41
简介：
信息：ICS：23.040.50 CCS：发布：2014-02-01 实施：

DB63/T 1980-2021 公路预制装配式涵洞质量检验评定规范
简介：
信息：ICS：93.080.10 CCS：P28 发布：2021-12-01 实施：2022-01-01

ASTM C1786-2016 符合AASHTO LRFD设计要求的涵洞, 暴雨排水沟和下水道所用的分段预制钢筋混凝土整体方形管的标准规格
简介：1.1x00a0;This specification covers precast reinforced concrete box sections comprised of separate segments that once properly field assembled make the final structure. These structures are intended to be used for the construction of culverts and for the conveyance of storm water, industrial wastes and sewage. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. However, box culverts manufactured to this standard are intended to meet the design requirements of the AASHTO LRFD Bridge Design Specifications, and as such, design guidance is included in Appendix X1. Note 2:x00a0;The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the box section specified, and provision for inspection at the construction site, are required. 1.2x00a0;The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
信息：ICS： CCS：发布：2016 实施：

ASTM C1433M-14 涵洞、雨水沟和下水道用预制钢筋混凝土整体箱形截面的标准规范&40；公制和41
简介：
信息：ICS：23.040.50 CCS：发布：2014-02-01 实施：

ASTM C1675-21 涵洞、雨水道和下水道用预制钢筋混凝土整体箱形截面的安装
简介：
信息：ICS：23.040.50 CCS：发布：2021-01-01 实施：

ASTM C1577-2016 符合AASHTO LRFD设计要求的涵洞, 暴雨排水沟和下水道所用的预制钢筋混凝土整体方形管的标准规格
简介：1.1x00a0;This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water, industrial wastes and sewage. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. However, standard designs per the AASHTO LRFD Bridge Design Specifications are included and the criteria used to develop these designs are given in Appendix X1. The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the box section specified, and provision for inspection at the construction site, are required. 1.2x00a0;The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
信息：ICS：91.100.30 ; 93.030 CCS：发布：2016 实施：

ASTM C1433-2014 涵洞、雨水道和排污道用预制钢筋混凝土整体方形管的标准规格
简介：1.1x00a0;This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water industrial wastes and sewage. 1.2x00a0;This specification is the companion to SI Specification C1433M; therefore, no SI equivalents are shown in this specification. Note 1x2014;This specification is primarily a manufacturing and purchasing specification. However, standard designs are included and the criteria used to develop these designs are given in Appendix X1. The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the box section specified, and provision for inspection at the construction site, are required.
信息：ICS：23.040.50 (Pipes and fittings of other materials) CCS：Q14 发布：2014 实施：

ASTM C1433-20e1 涵洞、雨水道和下水道用预制钢筋混凝土整体箱形截面的标准规范
简介：
信息：ICS：23.040.50 CCS：发布：2020-11-15 实施：

ASTM C1433-2016b 涵洞, 暴雨排水沟和下水道所用的预制钢筋混凝土整体方形管的安装的标准规格
简介：1.1x00a0;This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water industrial wastes and sewage. 1.2x00a0;This specification is the companion to SI Specification C1433M; therefore, no SI equivalents are shown in this specification. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. However, standard designs are included and the criteria used to develop these designs are given in Appendix X1. The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the box section specified, and provision for inspection at the construction site, are required.
信息：ICS：23.040.50 CCS：Q14 发布：2016 实施：

ASTM C1577-2014 符合美国国家公路与运输协会标准(AASHTO LRFD)设计要求的涵洞、雨水道和下水道所用的预制钢筋混凝土整体方形管的标准规格
简介：1.1x00a0;This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water, industrial wastes and sewage.Note 1x2014;This specification is primarily a manufacturing and purchasing specification. However, standard designs per the AASHTO LRFD Bridge Design Specifications are included and the criteria used to develop these designs are given in Appendix X1. The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the box section specified, and provision for inspection at the construction site, are required. 1.2x00a0;The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
信息：ICS：91.100.30 (Concrete and concrete products); 93.030 CCS：Q14 发布：2014 实施：

ASTM C1577-20e1 根据AASHTO LRFD设计的涵洞、雨水沟和下水道用预制钢筋混凝土整体箱形截面的标准规范
简介：
信息：ICS：91.100.30 CCS：发布：2020-11-15 实施：

ASTM C1504-2016 涵洞, 暴雨排水沟用预制钢筋混凝土三边构件制造的标准规格
简介：1.1x00a0;This specification covers single-cell precast conventionally reinforced concrete three-sided structures intended to be used for the construction of culverts and for the conveyance of storm water. 1.2x00a0;A complete metric companion to Specification C1504 has been developedx2014;C1504M; therefore, no metric equivalents are presented in this specification. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. The successful performance of this product depends upon the proper selection of the geometric section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete three-sided structure specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the geometric section specified and provisions for inspection at the construction site are required. 1.3x00a0;The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
信息：ICS：23.040.50 CCS：发布：2016 实施：

ASTM C1504-2014 涵洞、雨水管和下水道用预制钢筋混凝土三边结构制造的标准规范
简介：1.1x00a0;This specification covers single-cell precast conventionally reinforced concrete three-sided structures intended to be used for the construction of culverts and for the conveyance of storm water. 1.2x00a0;A complete metric companion to Specification C1504 has been developedx2014;C1504M; therefore, no metric equivalents are presented in this specification.Note 1x2014;This specification is primarily a manufacturing and purchasing specification. The successful performance of this product depends upon the proper selection of the geometric section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete three-sided structure specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the geometric section specified and provisions for inspection at the construction site are required. 1.3x00a0;The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
信息：ICS：23.040.50 (Pipes and fittings of other materials) CCS：Q14 发布：2014 实施：

ASTM C1433M-20 标准规范涵洞雨水渠和下水道预制钢筋混凝土整体箱形截面（公制）
简介：
信息：ICS：23.040.50 CCS：发布：2020-09-15 实施：

ASTM C1433M-2016a 涵洞, 暴雨排水沟和下水道所用的预制钢筋混凝土整体方形管的标准规格 (公制)
简介：1.1x00a0;This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water industrial wastes and sewage. 1.2x00a0;This specification is the SI companion to Specification C1433. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. However, standard designs are included and the criteria used to develop these designs are given in Appendix X1. The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that he must properly correlate the loading conditions and the field requirements with the box section specified and provide for inspection at the construction site.
信息：ICS：23.040.50 CCS：发布：2016 实施：

ASTM C1786-2014 符合AASHTO LRFD设计要求的涵洞, 暴雨排水沟和下水道所用的分段预制钢筋混凝土整体方形管的标准规格
简介：1.1x00a0;This specification covers precast reinforced concrete box sections comprised of separate segments that once properly field assembled make the final structure. These structures are intended to be used for the construction of culverts and for the conveyance of storm water, industrial wastes and sewage. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. However, box culverts manufactured to this standard are intended to meet the design requirements of the AASHTO LRFD Bridge Design Specifications, and as such, design guidance is included in Appendix X1. Note 2:x00a0;The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the box section specified, and provision for inspection at the construction site, are required. 1.2x00a0;The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
信息：ICS： CCS：发布：2014 实施：

ASTM C1433M-19 标准规范涵洞雨水渠和下水道预制钢筋混凝土整体箱形截面（公制）
简介：
信息：ICS：23.040.50 CCS：发布：2019-07-15 实施：

ASTM C1504M-2016 涵洞, 暴雨排水沟用预制钢筋混凝土三边构件制造的标准规格 (公制)
简介：1.1x00a0;This specification covers single-cell precast conventionally reinforced concrete three-sided structures intended to be used for the construction of culverts and for the conveyance of storm water. 1.2x00a0;This specification is the metric counterpart of Specification C1504; therefore, no imperial (metric) equivalents are presented in this specification. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. The successful performance of this product depends upon the proper selection of the geometric section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete three-sided structure specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the geometric section specified and provisions for inspection at the construction site are required. 1.3x00a0;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
信息：ICS：23.040.50 CCS：发布：2016 实施：

ASTM C1433M-2014 涵洞、雨水道和排污道用预制钢筋混凝土整体方形管的标准规格(公制)
简介：1.1x00a0;This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water industrial wastes and sewage. 1.2x00a0;This specification is the SI companion to Specification C1433.Note 1x2014;This specification is primarily a manufacturing and purchasing specification. However, standard designs are included and the criteria used to develop these designs are given in Appendix X1. The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that he must properly correlate the loading conditions and the field requirements with the box section specified and provide for inspection at the construction site.
信息：ICS：23.040.50 (Pipes and fittings of other materials) CCS：Q14 发布：2014 实施：

ASTM C1675-19 涵洞、雨水道和下水道用预制钢筋混凝土整体箱形截面的安装
简介：
信息：ICS：23.040.50 CCS：发布：2019-02-01 实施：

ASTM C1675-11(2015) 涵洞、雨水道和下水道用预制钢筋混凝土整体箱形截面的安装
简介：
信息：ICS：23.040.50 CCS：发布：2015-10-01 实施：

ASTM C1504M-2014 涵洞和雨水沟用预制钢筋混凝土三侧结构制造的标准规范(公制)
简介：1.1x00a0;This specification covers single-cell precast conventionally reinforced concrete three-sided structures intended to be used for the construction of culverts and for the conveyance of storm water. 1.2x00a0;This specification is the metric counterpart of Specification C1504; therefore, no imperial (metric) equivalents are presented in this specification.Note 1x2014;This specification is primarily a manufacturing and purchasing specification. The successful performance of this product depends upon the proper selection of the geometric section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete three-sided structure specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the geometric section specified and provisions for inspection at the construction site are required. 1.3x00a0;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
信息：ICS：23.040.50 (Pipes and fittings of other materials) CCS：Q14 发布：2014 实施：

ASTM C1675-18 涵洞、雨水道和下水道用预制钢筋混凝土整体箱形截面的安装
简介：
信息：ICS：23.040.50 CCS：发布：2018-02-01 实施：

ASTM C1433M-15 标准规范涵洞雨水渠和下水道预制钢筋混凝土整体箱形截面（公制）
简介：
信息：ICS：23.040.50 CCS：发布：2015-04-01 实施：

ASTM C1577-2014a 符合AASHTO LRFD设计要求的涵洞, 暴雨排水沟和下水道所用的预制钢筋混凝土整体方形管的标准规格
简介：1.1x00a0;This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water, industrial wastes and sewage. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. However, standard designs per the AASHTO LRFD Bridge Design Specifications are included and the criteria used to develop these designs are given in Appendix X1. The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the box section specified, and provision for inspection at the construction site, are required. 1.2x00a0;The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
信息：ICS：91.100.30;93.030 CCS：发布：2014 实施：

ASTM C1433M-18 标准规范涵洞雨水渠和下水道预制钢筋混凝土整体箱形截面（公制）
简介：
信息：ICS：23.040.50 CCS：发布：2018-01-01 实施：

ASTM C1504-2015a 涵洞和下水道用预制钢筋混凝土三面结构制造的标准规格
简介：1.1x00a0;This specification covers single-cell precast conventionally reinforced concrete three-sided structures intended to be used for the construction of culverts and for the conveyance of storm water. 1.2x00a0;A complete metric companion to Specification C1504 has been developedx2014;C1504M; therefore, no metric equivalents are presented in this specification. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. The successful performance of this product depends upon the proper selection of the geometric section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete three-sided structure specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the geometric section specified and provisions for inspection at the construction site are required. 1.3x00a0;The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
信息：ICS：23.040.50 CCS：发布：2015 实施：

ASTM C1433M-13b 标准规范涵洞雨水渠和下水道预制钢筋混凝土整体箱形截面（公制）
简介：
信息：ICS：23.040.50 CCS：发布：2013-07-01 实施：

ASTM C1675-17a 涵洞、雨水道和下水道用预制钢筋混凝土整体箱形截面的安装
简介：
信息：ICS：23.040.50 CCS：发布：2017-07-01 实施：

ASTM C1577-2015 符合AASHTO LRFD设计要求的涵洞, 暴雨排水沟和下水道所用的预制钢筋混凝土整体方形管的标准规格
简介：1.1x00a0;This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water, industrial wastes and sewage. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. However, standard designs per the AASHTO LRFD Bridge Design Specifications are included and the criteria used to develop these designs are given in Appendix X1. The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the box section specified, and provision for inspection at the construction site, are required. 1.2x00a0;The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
信息：ICS：91.100.30;93.030 CCS：发布：2015 实施：

ASTM C1433M-13a 标准规范涵洞雨水渠和下水道预制钢筋混凝土整体箱形截面（公制）
简介：
信息：ICS：23.040.50 CCS：发布：2013-04-01 实施：

ASTM C1675-17 涵洞、雨水道和下水道用预制钢筋混凝土整体箱形截面的安装
简介：
信息：ICS：23.040.50 CCS：发布：2017-04-01 实施：

DB43/T 757-2013 预制装配式钢筋混凝土涵洞
简介：
信息：ICS：93.080.01 CCS：F66 发布：2013-02-20 实施：2013-03-10

ASTM C1675-2017a 涵洞, 暴雨排水沟和下水道用预制钢筋混凝土整体方形管安装的标准实施规程
简介：4.1x00a0;This practice is useful as a reference by an owner and the ownerx2019;s engineer in preparing project specifications. 1.1x00a0;This practice covers the installation of precast reinforced concrete box sections cast monolithically and intended to be used for the conveyance of storm water, industrial wastes and sewage, and for passageways. 1.2x00a0;The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3x00a0;This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
信息：ICS：23.040.50 CCS：Q14 发布：2017 实施：

ASTM C1504M-2015a 涵洞和下水道用预制钢筋混凝土三面结构制造的标准规格 (米制)
简介：1.1x00a0;This specification covers single-cell precast conventionally reinforced concrete three-sided structures intended to be used for the construction of culverts and for the conveyance of storm water. 1.2x00a0;This specification is the metric counterpart of Specification C1504; therefore, no imperial (metric) equivalents are presented in this specification. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. The successful performance of this product depends upon the proper selection of the geometric section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete three-sided structure specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the geometric section specified and provisions for inspection at the construction site are required. 1.3x00a0;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
信息：ICS：23.040.50 CCS：发布：2015 实施：

ASTM C1433M-13 标准规范涵洞雨水渠和下水道预制钢筋混凝土整体箱形截面（公制）
简介：
信息：ICS：23.040.50 CCS：发布：2013-02-15 实施：

ASTM C1577-2017 符合AASHTO LRFD设计要求的涵洞, 暴雨排水沟和下水道所用的预制钢筋混凝土整体方形管的标准规格
简介：1.1x00a0;This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water, industrial wastes and sewage. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. However, standard designs per the AASHTO LRFD Bridge Design Specifications are included and the criteria used to develop these designs are given in Appendix X1. The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the box section specified, and provision for inspection at the construction site, are required. 1.2x00a0;The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
信息：ICS：91.100.30 ; 93.030 CCS：Q14 发布：2017 实施：

ASTM C1504M-2015 涵洞, 暴雨排水沟用预制钢筋混凝土三边构件制造的标准规范 (米制)
简介：1.1x00a0;This specification covers single-cell precast conventionally reinforced concrete three-sided structures intended to be used for the construction of culverts and for the conveyance of storm water. 1.2x00a0;This specification is the metric counterpart of Specification C1504; therefore, no imperial (metric) equivalents are presented in this specification. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. The successful performance of this product depends upon the proper selection of the geometric section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete three-sided structure specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the geometric section specified and provisions for inspection at the construction site are required. 1.3x00a0;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
信息：ICS：23.040.50 CCS：发布：2015 实施：

ASTM C1504M-2013 涵洞和雨水沟用预制钢筋混凝土三侧结构生产的标准规范(公制)
简介：1.1x00a0;This specification covers single-cell precast conventionally reinforced concrete three-sided structures intended to be used for the construction of culverts and for the conveyance of storm water. 1.2x00a0;This specification is the metric counterpart of Specification C1504; therefore, no imperial equivalents are presented in this specification.Note 1x2014;This specification is primarily a manufacturing and purchasing specification. The successful performance of this product depends upon the proper selection of the geometric section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete three-sided structure specified herein is cautioned that he must properly correlate the loading conditions and the field requirements with the geometric section specified and provide for inspection at the construction site. 1.3x00a0;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
信息：ICS：23.040.50 (Pipes and fittings of other materials) CCS：Q81 发布：2013-01-01 实施：

ASTM C1433M-16b 标准规范涵洞雨水渠和下水道预制钢筋混凝土整体箱形截面（公制）
简介：
信息：ICS：23.040.50 CCS：发布：2016-11-01 实施：

ASTM C1433-2015 涵洞, 暴雨排水沟和下水道所用的预制钢筋混凝土整体方形管的标准规格
简介：1.1x00a0;This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water industrial wastes and sewage. 1.2x00a0;This specification is the companion to SI Specification C1433M; therefore, no SI equivalents are shown in this specification. Note 1:x00a0;This specification is primarily a manufacturing and purchasing specification. However, standard designs are included and the criteria used to develop these designs are given in Appendix X1. The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the box section specified, and provision for inspection at the construction site, are required.
信息：ICS：23.040.50 CCS：发布：2015 实施：

ASTM C1577-2013b 符合美国国家公路与运输协会标准(AASHTO LRFD)设计要求的涵洞、雨水道和下水道所用的预制钢筋混凝土整体方形管的标准规格
简介：1.1x00a0;This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water, industrial wastes and sewage.Note 1x2014;This specification is primarily a manufacturing and purchasing specification. However, standard designs per the AASHTO LRFD Bridge Design Specifications are included and the criteria used to develop these designs are given in Appendix X1. The successful performance of this product depends upon the proper selection of the box section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete box sections specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the box section specified, and provision for inspection at the construction site, are required. 1.2x00a0;The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
信息：ICS：91.100.30 (Concrete and concrete products); 93.030 CCS：Q14 发布：2013 实施：

ASTM C1433M-16a 标准规范涵洞雨水渠和下水道预制钢筋混凝土整体箱形截面（公制）
简介：
信息：ICS：23.040.50 CCS：发布：2016-02-01 实施：

ASTM C1504-2013 涵洞、雨水管和下水道用预制钢筋混凝土三边结构制造的标准规范
简介：1.1x00a0;This specification covers single-cell precast conventionally reinforced concrete three-sided structures intended to be used for the construction of culverts and for the conveyance of storm water. 1.2x00a0;A complete metric companion to Specification C1504 has been developedx2014;C1504M; therefore, no metric equivalents are presented in this specification.Note 1x2014;This specification is primarily a manufacturing and purchasing specification. The successful performance of this product depends upon the proper selection of the geometric section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete three-sided structure specified herein is cautioned that he must properly correlate the loading conditions and the field requirements with the geometric section specified and provide for inspection at the construction site. 1.3x00a0;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
信息：ICS：23.040.50 (Pipes and fittings of other materials) CCS：Q14 发布：2013 实施：