炭黑萃取检测标准

发布时间:2023-03-13 22:32:17 阅读量: 来源:中析研究所

炭黑萃取相关标准参考信息

GB/T 3780.29-2022 炭黑 第29部分:溶剂可萃取物的测定
简介:
信息:ICS:83.040.20 CCS:G49 发布:2022-12-30 实施:2023-04-01

KS M ISO 3858-2009 橡胶配合剂.炭黑.甲苯萃取液透光率的测定
简介:이 표준은 톨루엔 추출물에 의해서 일어나는 변색을 측정하는 방법으로서, 고무 산업에 사용되
信息:ICS:83.040.20 CCS:G49 发布:2009-06-05 实施:2009-06-05

NF T45-138-1-1993 橡胶配料.炭黑.甲苯萃取物透光率测定.第1部分:快速法
简介:
信息:ICS:83.040.20 CCS:G49 发布:1993-12 实施:1993-11-20

T/SAFCM 035-2021 食品接触材料及制品 炭黑中甲苯萃取物的测定
简介:本团体标准规定了范围、规范性引用文件、原理、试剂和材料、仪器和设备、分析步骤、分析结果的表述、精密度等。
信息:ICS:67.250 CCS:C419 发布:2021-12-28 实施:2021-12-28

KS M ISO 3858-2009 橡胶配合剂.炭黑.甲苯萃取液透光率的测定
简介:이 표준은 톨루엔 추출물에 의해서 일어나는 변색을 측정하는 방법으로서, 고무 산업에 사용되
信息:ICS:83.040.20 CCS:G49 发布:2009-06-05 实施:2009-06-05

NF T45-138-2-1993 橡胶配方配合剂.炭黑.甲苯萃取物透光率的测定.第2部分:产品评定法
简介:
信息:ICS:83.040.20 CCS:G49 发布:1993-12 实施:1993-11-20

ASTM D7772-15(2019) 炭黑萃取物的标准试验方法&x2013;环己烷提取物的吸光度
简介:
信息:ICS:83.040.20 CCS发布:2019-12-01 实施

NF T45-138-2009 橡胶配合剂.炭黑.甲苯萃取液透光率的测定
简介:
信息:ICS:83.040.20 CCS:G49 发布:2009-04-01 实施:2009-04-11

NF T45-136-1992 橡胶工业用原材料.炭黑.溶剂可萃取物的测定
简介:
信息:ICS:83.040.20 CCS:G49 发布:1992-12-01 实施:1992-12-20

ASTM D4527-18 炭黑的标准试验方法&x2014;溶剂萃取物
简介:
信息:ICS:83.040.20 CCS发布:2018-06-01 实施

BS ISO 3858-2008 橡胶合成配料.炭黑.甲苯萃取物透光率的测定
简介:
信息:ICS:83.040.20 CCS:G49 发布:2008-09-30 实施:2008-09-30

STAS 9116-1990 炭黑用油萃取
简介:Prezentul standard se refer? la extractul de ulei care rezult? de la solventarea eu furfurol a uleiurilor minerale distilate.
信息:ICSCCS:A59 发布:1990-10-01 实施

ASTM D1618-18 炭黑萃取物的标准试验方法&x2014;甲苯萃取物透过率
简介:
信息:ICS:83.040.20 CCS发布:2018-06-01 实施

ISO 3858-2008 橡胶配合剂.炭黑.甲苯萃取液透光率的测定
简介:This International Standard specifies a method for the determination of the light transmittance of the tolueneextract from carbon black for use in the rubber industry, as a means of measuring the discolouration causedby the extractable matterThe light transmittance value provides an estimate of the degree of discolouration caused by the toluene-extractable matter present on the surface of the carbon black.This method may not be applicable to carbon blacks with a high extractable-matter content.
信息:ICS:83.040.20 CCS:G49 发布:2008-09 实施

ISO 3858-1-1990 橡胶工业用炭黑 甲苯萃取液透光率的测定 第1部分:快速法
简介:
信息:ICS:83.040.20 CCS:G34 发布:1990-09 实施:1990-09-01

ISO 3858-2018 橡胶配合剂.炭黑.甲苯萃取液透光率的测定
简介:
信息:ICS:83.040.20 CCS:G49 发布:2018-05-01 实施

NF T45-136-2007 橡胶合成配料.炭黑.溶剂可萃取材料的测定
简介:
信息:ICS:83.040.20 CCS:G49 发布:2007-08-01 实施:2007-08-20

ISO 3858-2-1990 橡胶工业用炭黑 甲苯萃取液透光率的测定 第2部分:产品评定法
简介:
信息:ICS:83.040.20 CCS:G34 发布:1990-09 实施:1990-09-01

ASTM D1618-17 炭黑萃取物的标准试验方法&x2014;甲苯萃取物透过率
简介:
信息:ICS:83.040.20 CCS发布:2017-08-01 实施

ASTM D1618-99(2004) 炭黑提取物的标准试验方法&8212;甲苯萃取物透过率
简介:
信息:ICS:83.040.20 CCS发布:2004-07-01 实施

ISO 3858-2:1990 橡胶工业用炭黑甲苯萃取物透光率的测定第2部分:产品评价方法
简介:
信息:ICS:83.040.20 CCS发布:1990-08-23 实施

ASTM D1618-2017 可萃取炭黑甲苯萃取物透光率的标准试验方法
简介:4.1x00a0;The toluene discoloration value provides an estimate of toluene-soluble discoloring residues present on the carbon black. 1.1x00a0;This test method covers the measurement of the degree of toluene discoloration by carbon black extractables and is useful in controlling the reaction processes for production of carbon black. This test method may not be applicable to carbon blacks with high extractables. 1.2x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4x00a0;This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
信息:ICS:83.040.20 CCS:G49 发布:2017 实施

ASTM D4527-99(2004) 炭黑和8212的标准试验方法;溶剂萃取物
简介:
信息:ICS:83.040.20 CCS发布:2004-07-01 实施

ISO 3858-1:1990 橡胶工业用炭黑.甲苯萃取物透光率的测定.第1部分:快速法
简介:
信息:ICS:83.040.20 CCS发布:1990-08-23 实施

ASTM D4527-99(2016) 炭黑的标准试验方法&x2014;溶剂萃取物
简介:
信息:ICS:83.040.20 CCS发布:2016-06-01 实施

ISO 3858:2004 橡胶配合剂.炭黑.甲苯萃取物透光率的测定
简介:
信息:ICS:83.040.20 CCS发布:2004-05-27 实施

BS 5293-16-1990 橡胶工业用炭黑取样和试验.第16部分:溶剂萃取物测定方法
简介:Applicable to all carbon blacks.
信息:ICS:83.040.20 CCS:G49 发布:1990-06-29 实施:1990-06-29

KS M ISO 6209-2015(2021) 橡胶配合剂炭黑溶剂可萃取物的测定
简介:
信息:ICS:83.040.20 CCS发布:2015-12-24 实施

ISO 3858-2004 橡胶配合剂.炭黑.甲苯萃取液透光率的测定
简介:This International Standard specifies a method for the determination of the light transmittance of the toluene extract from carbon black for use in the rubber industry, as a means of measuring the discolouration caused by the extractable matter.The light transmittance value provides an estimate of the degree of discolouration caused by the toluene-extractable matter present on the surface of the carbon black.This method may not be applicable to carbon blacks with a high extractable-matter content.
信息:ICS:83.040.20 CCS:G49 发布:2004-05 实施

ISO 6209:1988 橡胶配合剂.炭黑.溶剂萃取材料的测定
简介:
信息:ICS:83.040.20 CCS发布:1988-04-14 实施

ASTM D7772-15 炭黑萃取物的标准试验方法&x2013;环己烷提取物的吸光度
简介:
信息:ICS:83.040.20 CCS发布:2015-06-01 实施

KS M ISO 3858-1-2002(2007) 橡胶工业用炭黑甲苯萃取物透光率的测定第1部分:快速法
简介:
信息:ICS:83.040.20 CCS发布:2002-12-30 实施

ISO 6209-1988 橡胶配方配合剂.炭黑.可萃取物溶剂的测定
简介:Lays down two methods for quantitative determination. Applicable to all types of carbon black. Extraction of test portions with solvent for 16 hours. Elimination of the solvent by evaporation and weighing the of the extract obtained. 2 figures show the test apparatus. - 鳦onstitutes a minor revision of the second edition (ISO 6209:1983).
信息:ICS:83.040.20 CCS:G34 发布:1988-04 实施:1988-04-15

ASTM D7772-2015 环己烷萃取的可萃取炭黑吸收率的标准试验方法
简介:4.1x00a0;This procedure serves as a screening process for carbon blacks used in the manufacturing of products that are to come into contact with food. The cyclohexane extract absorbance at 386 nm must be less than 0.10 for a 50 mm cuvette in order to fulfill various regulatory requirements. 1.1x00a0;This method covers the determination of extinction (absorbance) of carbon black cyclohexane extract at 386 nm using a UV spectrophotometer. 1.2x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息:ICS:83.040.20 CCS发布:2015 实施

KS M ISO 3858-2-2002(2007) 橡胶工业用炭黑甲苯萃取物透光率的测定第2部分:产品评价方法
简介:
信息:ICS:83.040.20 CCS发布:2002-12-30 实施

ISO 3858-2-1983 橡胶配合剂炭黑甲苯萃取物透光率的测定第2部分:产品评价方法
简介:
信息:ICS:83.040.20 CCS发布:1983-12-01 实施

GOST ISO 3858-2013 橡胶配合剂. 炭黑. 甲苯萃取液透光率的测定
简介:
信息:ICS:83.040.20 CCS发布:2013 实施:2016-01-01

ASTM D1618-99 炭黑萃取物甲苯萃取物透光率的标准试验方法
简介:
信息:ICS:83.040.20 CCS发布:1999-07-10 实施

ISO 6209-1983 橡胶配合剂.炭黑.溶剂萃取材料的测定
简介:
信息:ICS:83.040.20 CCS发布:1983-09-01 实施

ASTM D4527-99(2011) 炭黑溶剂萃取物的标准试验方法
简介:
信息:ICS:83.040.20 CCS发布:2011-05-01 实施

ASTM D4527-99 炭黑溶剂萃取物的标准试验方法
简介:
信息:ICS:83.040.20 CCS发布:1999-05-10 实施

STAS 10991-1977 柴油萃取得到的炭黑
简介:1 Prezentul standard se refer? la extractul rezultat din solventarea cu furfural a motorinei de cracare catalitic?, singur? sau ?n amestec cu motorina de cocsare.2 Extractul din motorin? se utilizeaz? ca materie prim? la fabricarea negrului de fu
信息:ICSCCS发布:1977-12-01 实施

ASTM D7772-2011 炭黑可萃取性的标准试验方法.环己烷萃取物的吸光度
简介:This procedure serves as a screening process for carbon blacks used in the manufacturing of products that are to come into contact with food. The cyclohexane extract absorbance at 386 nm must be less than 0.10 for a 50 mm cuvette in order to fulfill various regulatory requirements. ^SCOPE: 1.1 This method covers the determination of extinction (absorbance) of carbon black cyclohexane extract at 386 nm using a UV spectrophotometer. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.1 This method covers the determination of extinction (absorbance) of carbon black cyclohexane extract at 386 nm using a UV spectrophotometer. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息:ICS:83.040.20 (Rubber compounding ingredients) CCS:G49 发布:2011 实施

ASTM D4527-1999(2004) 炭黑的标准试验方法.溶剂可萃取物
简介:The carbon black extract test procedure provides a uniform and precise method for the gravimetric determination of organic-solvent extractables on carbon black. Accuracy and precision are acceptable for most specification or regulatory purposes, or both. However, carbon black with very low extract (less than 0.02 %) may require a more rigorous extraction procedure. The actual chemical composition of the extract can vary significantly with the type and origin of the carbon black.1.1 This test method covers the procedure for measuring carbon black solvent extractables.1.1.1 This test method determines the total material extracted from carbon black by toluene under specified conditions. The procedure is also applicable to other solvents such as cyclohexane, etc.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific precautionary statement, see Section 7.
信息:ICS:83.040.20 (Rubber compounding ingredients) CCS:G49 发布:1999 实施

简介: 信息:

KS M ISO 6209-2010 橡胶配方材料.炭黑粉.溶剂萃取物的测定
简介:이 표준은 고무 산업에 사용되는 카본 블랙에서 용매로 추출한 물질을 양적으로 측정하는 방법
信息:ICS:83.040.20 CCS:G49 发布:2010-12-30 实施:2010-12-30

ASTM D1618-1999 炭黑可萃取物的标准试验方法.甲苯萃取物的透射率
简介:1.1 This test method covers the measurement of the degree of toluene discoloration by carbon black extractables and is useful in controlling the reaction processes for production of carbon black. This test method may not be applicable to carbon blacks with high extractables. 1.2 The values stated in SI units are to be regarded as standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息:ICS:83.040.20 (Rubber compounding ingredients) CCS:G49 发布:1999 实施

简介: 信息:

BS ISO 6209-2009 橡胶配料成分.炭黑.溶剂萃取物质的测定
简介:
信息:ICS:83.040.20 CCS:G49 发布:2009-08-31 实施:2009-08-31

ASTM D4527-1999 炭黑的标准试验方法.溶剂可萃取物
简介:1.1 These test methods cover two procedures for measuring carbon black solvent extractables. 1.1.1 Method A -This test method determines the total material extracted from carbon black by toluene under specified conditions. The procedure is also applicable using other solvents such as benzene, cyclohexane, etc. 1.1.2 Method B -This test method measures the portion of the carbon black extract that is eluted with cyclohexane from a silica gel column. This amount is subtracted from the total mass percent extract determined in Method A and the resultant is assumed to be the aromatic/polar fraction. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific precautionary statement, see Section 7.
信息:ICS:83.040.20 (Rubber compounding ingredients) CCS:G49 发布:1999 实施

简介: 信息:

BS ISO 6209-2009 橡胶配料成分.炭黑.溶剂萃取物质的测定
简介:
信息:ICS:83.040.20 CCS:G49 发布:2009-08-31 实施:2009-08-31

ASTM D1618-1999(2004) 炭黑可萃取性的标准试验方法.甲苯萃取物的透射系数
简介:The toluene discoloration value provides an estimate of toluene-soluble discoloring residues present on the carbon black.1.1 This test method covers the measurement of the degree of toluene discoloration by carbon black extractables and is useful in controlling the reaction processes for production of carbon black. This test method may not be applicable to carbon blacks with high extractables.1.2 The values stated in SI units are to be regarded as standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息:ICS:83.040.20 (Rubber compounding ingredients) CCS:G49 发布:1999 实施

简介: 信息:

ISO 6209:2009 橡胶配合剂——炭黑——溶剂可萃取物质的测定
简介:
信息:ICS:83.040.20 CCS发布:2009-07-02 实施

ASTM D1618-1999(2011) 炭黑可萃取性的标准试验方法 甲苯萃取物的透射系数
简介:The toluene discoloration value provides an estimate of toluene-soluble discoloring residues present on the carbon black.1.1 This test method covers the measurement of the degree of toluene discoloration by carbon black extractables and is useful in controlling the reaction processes for production of carbon black. This test method may not be applicable to carbon blacks with high extractables.1.2 The values stated in SI units are to be regarded as standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息:ICS:83.040.20 (Rubber compounding ingredients) CCS:G49 发布:1999 实施

简介: 信息:

ISO 6209-2009 橡胶配方材料.炭黑粉.溶剂萃取物的测定
简介:
信息:ICS:83.040.20 CCS:G49 发布:2009-07 实施

STAS SR ISO 6209-1995 橡胶混合物.炭黑.溶剂可萃取原料的测定
简介:Prezentul Standard Interna?ional stabile?te metoda pentru determinarea cantitativ? a materialelor extractibile cu solven?i din negrul de fum destinat industriei cauciucului. Metoda se aplic? tuturor tipurilor de negru de fum.
信息:ICS:83.040.20 CCS发布:1995-6-1 实施

简介: 信息:

检测标准 炭黑萃取检测标准

检测资质

权威认证,确保检测数据的准确性和可靠性

CMA认证

CMA认证

中国计量认证

CNAS认证

CNAS认证

中国合格评定国家认可委员会

ISO认证

ISO认证

质量管理体系认证

行业资质

行业资质

多项行业权威认证

了解我们

专业团队,丰富经验,为您提供优质的检测服务

了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们

先进检测设备

引进国际先进仪器设备,确保检测数据的准确性和可靠性

精密检测仪器

精密光谱分析仪

用于材料成分分析和元素检测,精度可达ppm级别

色谱分析仪器

高效液相色谱仪

用于食品安全检测和化学成分分析,分离效率高

材料测试设备

万能材料试验机

用于材料力学性能测试,可进行拉伸、压缩等多种测试

热分析仪器

差示扫描量热仪

用于材料热性能分析,测量相变温度和热焓变化

显微镜设备

扫描电子显微镜

用于材料微观结构观察,分辨率可达纳米级别

环境检测设备

气相色谱质谱联用仪

用于复杂有机化合物的分离和鉴定,灵敏度高

我们的优势

选择中科光析,选择专业与信赖

权威资质

具备CMA、CNAS等多项国家级资质认证,检测报告具有法律效力

先进设备

引进国际先进检测设备,确保检测数据的准确性和可靠性

专业团队

拥有经验丰富的检测工程师和技术专家团队

快速响应

7×24小时服务热线,快速响应客户需求,及时出具检测报告

需要专业检测服务?

我们的专业技术团队随时为您提供咨询和服务支持,欢迎随时联系我们

在线咨询工程师

定制实验方案

24小时专业客服在线

需要检测服务?

专业工程师在线解答

400-640-9567

全国服务热线

查看报告模版