荣誉资质图片

cma资质(CMA)     CNAS资质(CNAS)     iso体系(ISO) 高新技术企业(高新技术企业)

重型机械的参数相关标准参考信息

GB/T 39960-2021 闭式单动机械压力机 参数和尺寸
简介:
信息:ICS:25.120.10 CCS:J62 发布:2021-03-09 实施:2021-10-01 00:00:00.0

KS B ISO 21573-2-2012 建筑设计机械与设备.混凝土泵.第2部分:根据技术参数的检查步骤
简介:이 표준은 KS B ISO 21573-1에서 정의된 콘크리트 펌프의 기술적 사양 및 상용
信息:ICS:91.220 CCS:P01 发布:2012-12-26 实施:2012-12-26

ISO 21573-2:2008 建筑施工机械和设备——混凝土泵第2部分:技术参数检查程序
简介:
信息:ICS:91.220 CCS发布:2008-06-23 实施

GB/T 32335-2015 机械振动与冲击 振动数据采集的参数规定
简介:
信息:ICSCCS发布:2016-07-01 实施:2016-07-01

KS B ISO 21573-2-2012(2022) 建筑施工机械和设备混凝土泵第2部分:技术参数检验程序
简介:
信息:ICS:91.220 CCS发布:2012-12-26 实施

ISO 21573-2-2008 建筑结构机械和设备.混凝土泵.第2部分:技术参数的检验程序
简介:This part of ISO 21573 specifies the procedure and requirements for examining the technical commercialspecifications of concrete pumps as defined in ISO 21573-1.It applies to mobile (with or without boom) and stationary concrete pumps.
信息:ICS:91.220 CCS:P97 发布:2008-06-15 实施

GB/T 25749.7-2012 机械安全.空气传播的有害物质排放的评估.第7部分:测量污染物浓度参数的试验台法
简介:GB/T 25749的本部分规定了在给定操作条件下,使用试验台测量空气中机器排放的给定有害物质浓度参数的一种试验方法。该方法只适用于排放的气体,蒸汽和可吸入性颗粒。在可能的情况下,在试验台法中确定排放率(见GB/T 25749.3)。测量机器的污染物浓度参数可用于:a)评估机器的性能;b)评估机器的改进;c)预定用途相同的各组机器之间的比较(这种组是根据功能和加工材料定义的);d)按照污染物浓度参数将同一组的机器分级;e)按照污染物浓度参数确定机器的技术水平。
信息:ICS:13.110 CCS:J09 发布:2012-05-11 实施:2012-12-01

ISO 29042-8-2011 机械安全.气载有害物质排放的评估.第8部分:污染物浓度参数测量的室内方法
简介:This part of ISO 29042 specifies a room method for the measurement of the pollutant concentration parameter of a given airborne hazardous substance from machines, located in a test room and operating the machines under defined conditions. This method is applicable only to machines with a local exhaust ventilation with an air flow rate W500 m3/h and machines without recirculated air.Measurement of the pollutant concentration parameter of a machine can serve for the:a)evaluation of the performance of a machine;b)evaluation of the improvement of the machine;c)comparison of machines within different groups of machines with the same intended use (such groups being defined by the function and materials processed);d)ranking of machines from the same group according to their pollutant concentration parameters;e)determination of the state of the art of a machine with respect to its pollutant concentration parameter.
信息:ICS:13.110 CCS:C70 发布:2011-01-15 实施:2011-01-15

NF E90-014-2008 机械振动和冲击.振动数据的采集用指定参数
简介:
信息:ICS:17.160 CCS:J04 发布:2008-06-01 实施:2008-06-07

GB/T 25749.8-2012 机械安全.空气传播的有害物质排放的评估.第8部分:测量污染物浓度参数的室内法
简介:GB/T 25749的本部分规定了在给定条件下操作位于试验房间内的机器时,测量空气中机器排放的给定有害物质的污染物浓度参数的室内法。本方法只适用于局部排气通风的空气流量≥500 m/h的机器以及不带空气循环的机器。测量机器的污染物浓度参数,可用于:a)评估机器的性能;b)评估机器的改进;c)预定用途相同的各组机器之间的比较(这种组是根据功能和加工材料定义的);d)按照污染物浓度参数将同一组的机器分级;e)按照污染物浓度参数确定机器的技术水平。
信息:ICS:13.110 CCS:J09 发布:2012-05-11 实施:2012-12-01

ISO 29042-8:2011 机械安全——空气中有害物质排放的评价第8部分:污染物浓度参数测量的房间法
简介:
信息:ICS:13.110 CCS发布:2011-01-06 实施

BS ISO 21289-2008 机械振动和冲击.振动数据的采集用指定参数
简介:
信息:ICS:17.160 CCS:N65 发布:2008-05-30 实施:2008-05-30

GB/T 21153-2007 土方机械 尺寸、性能和参数的单位与测量准确度
简介:本标准规定了测量GB/T 8498所定义的土方机械的机器尺寸、性能和参数时所用的基准单位、符号和准确度。 本标准不包括具体的测量方法和所用的仪器。
信息:ICS:53.100 CCS:P97 发布:2007-11-01 实施:2008-01-01

GOST R 54784-2011 测试农用拖拉机和机械.评估机器的技术参数
简介:
信息:ICS:65.060.01 CCS发布:2011-01-01 实施:2012-03-01

ISO 21289:2008 机械振动与冲击——为采集振动数据而指定的参数
简介:
信息:ICS:17.160 CCS发布:2008-03-04 实施

GB/T 5170.13-2005 电工电子产品环境试验设备基本参数检定方法 振动(正弦)试验用机械振动台
简介:1.1 本部分规定了振动(正弦)试验用机械振动台在进行定型鉴定、出厂检验和定期检定时的检定项目、检定用主要仪器及要求、检定条件、检定时的一般规定、检定方法及检定结果等内容。 1.2 本部分适用于对GB/T 2423.10《电工电子产品环境试验规程 第2部分:试验方法 试验Fc:振动(正弦)试验方法》进行振动试验用机械振动台(以下简称振动台)基本参数的检定方法。 本部分也适用于类似试验设备的检定。
信息:ICS:19.040 CCS:K04 发布:2005-03-03 实施:2005-08-01

DIN EN 1991-3/NA-2010 国家附录. 国家制定参数. 欧洲规范1: 建造行为. 第3部分: 起重机和机械施工
简介:
信息:ICS:53.020.20;91.010.30 CCS:J80 发布:2010-12 实施

ISO 21289-2008 机械振动和冲击.振动数据的采集用指定参数
简介:This International Standard identifies a set of parameters to be specified, as applicable, for vibrationmeasurements, analysis, reporting and archiving. It is intended for use in the testing of structures, machines,vehicles, sensitive equipment and other dynamic systems.This International Standard applies to measurements made by modern data acquisition systems, includingdigital signal processors, using readily available commercial instrumentation. It can be applied to a variety ofcommon vibration measurement types, including time history, spectrum and frequency-response functionmeasurements.
信息:ICS:17.160 CCS:J04 发布:2008-03-01 实施

GB/T 14091-1993 机械工业产品环境参数分类及其严酷程度分级
简介:本标准规定了机械产品环境参数的分类及其在运输、贮存、安装和使用中所遇到的环境参数严酷程度的分级。 本标准适用于机械产品,包括农机具、内燃机、工程机械、矿山机械、重型机械、起重运输机械、石化通用机械、电工产品、仪器仪表、机床工具、通用零部件等。
信息:ICS:19.040 CCS:A21 发布:1993-01-13 实施:1993-10-01

UL 1703 CRD-2010 平板光伏组件和板的UL安全标准. 节/段落参考: 41.1主题: 机械载荷试验挠度参数 (第三版: 2004年6月30日)
简介:
信息:ICSCCS:K36 发布:2010-09-15 实施

GOST R 50803-2008 食品加工机械.牛奶贸易农场和接收站的牛奶储存和冷却用大容器.技术要求和安全参数
简介:
信息:ICS:65.040.10 CCS:X08 发布:2008 实施:2012-01-01

GB/T 6826-1986 选矿机械主参数系列
简介:本标准适用于选矿机械产品的设计。
信息:ICS:73.120 CCS:D96 发布:1986-09-02 实施:1987-06-01

UL 1703 CRD-2010 平板光伏组件和板的UL安全标准. 节/段落参考: 41.1主题: 机械载荷试验挠度参数 (第三版: 2004年6月30日)
简介:
信息:ICSCCS:K36 发布:2010-09-15 实施

BS EN 843-3-2005 高级工业陶瓷.室温下单片陶瓷的机械特征.第3部分:通过固定应力率挠曲强度测定快速裂痕增长参数
简介:This European Standard specifies a method for the determination of subcritical crack growth parameters of advanced monolithic technical ceramics in the temperature range 15 °C to 30 °C by measuring thedependence of mean fracture strength on the rate of loading. The method is based on strength test procedures described in EN 843-1. This European Standard is not applicable to test pieces with artificially introduced flaws or cracks.
信息:ICS:81.060.30 CCS:Q32 发布:2007-01-31 实施:2007-01-31

GB/T 5170.13-1985 电工电子产品环境试验设备基本参数检定方法 振动(正弦)试验用机械振动台
简介:本标准规定了按GB2423.10《电工电子产品基本环境试验规程试验Fc:振动(正弦)试验方法》进行振动试验用机械振动台系统(以下简称振动台)基本参数的检定方法。
信息:ICS:19.040 CCS:K04 发布:1985-05-07 实施:1986-01-01

ISO 29042-7:2010 机械安全——空气中有害物质排放的评价第7部分:污染物浓度参数测量的试验台方法
简介:
信息:ICS:13.110 CCS发布:2010-03-11 实施

DIN EN 843-3-2005 高级工业陶瓷.室温下整体陶瓷的机械特征.第3部分:恒定应力速度挠曲强度试验中亚临界断裂增长参数的测定
简介:This European Standard specifies a method for the determination of subcritical crack growth parameters of advanced monolithic technical ceramics in the temperature range 15 ?to 30 ?by measuring the dependence of mean fracture strength on the rate of loading. The method is based on strength test procedures specified in EN 843-1. This European Standard is not applicable to test pieces with artificially introduced flaws or cracks.
信息:ICS:81.060.30 CCS:Q32 发布:2005-08 实施

PNS ISO 29042-8-2021 机械安全.空气中有害物质排放的评估.第8部分:污染物浓度参数测量的房间法
简介:
信息:ICS:13.110 CCS:J00/09 发布:2021 实施

ISO 29042-7-2010 机械安全性.气载有害物质排放的评估.第7部分:污染物浓度参数的测量用试验工作台法
简介:This part of ISO 29042 specifies a test bench method for the measurement of the pollutant concentrationparameter of a given airborne hazardous substance from a machine, using a test bench under specifiedoperating conditions. The method is applicable only to the determination of emitted gases, vapours andrespirable particles. It is intended that whenever possible the emission rate be determined in a test bench (seeISO 29042-3).Measurement of the pollutant concentration parameter of a machine can serve for thea) evaluation of the performance of the machine,b) evaluation of the improvement of the machine,c) comparison of machines within different groups of machines with the same intended use (such groupsbeing defined by the function and materials processed),d) ranking of machines from the same group according to their pollutant concentration parameters, ande) determination of the state of the art of a machine with respect to its pollutant concentration parameter.
信息:ICS:13.040.40;13.110 CCS:Z62 发布:2010-03 实施

EN 843-3-2005 高级工业陶瓷.环境温度整体陶瓷的机械特征.第3部分:恒定应力速度挠曲强度试验中亚临界断裂增长参数的测定[代替:CEN ENV 843-3]
简介:This European Standard specifies a method forThe determination of subcritical crack growth parameters of advanced monolithic technical ceramics inThe temperature range 15 ℃ to 30 ℃ by measuringThe dependence of mean fracture strength onThe rate of loading.The method is based on strength test procedures described in EN 843-1.This European Standard is not applicable to test pieces with artificially introduced flaws or cracks.
信息:ICS:81.060.30 CCS发布:2005-06-01 实施

ISO 21573-2-2020 建筑结构机械和设备. 混凝土泵. 第2部分: 技术参数的检验程序
简介:
信息:ICSCCS:P97 发布:2020-12-00 实施

KS P ISO 14243-3-2009 外科植入物.全部膝关节假肢的磨损.第3部分:带位移控制和相关试验环境条件的磨损试验机械的承载和位移参数
简介:이 표준에서는 부하와 변위제어하의 마모시험기계 내에서의 관절 구성품 사이의 상대적 움직임,
信息:ICS:11.040.40 CCS:C45 发布:2009-12-21 实施:2009-12-21

BS ISO 14243-3-2004 外科植入物.全部膝关节假肢的磨损.带位移控制和相关试验环境条件的磨损试验机械的负载和位移参数
简介:This part of ISO 14243 specifies relative movement between articulating components, the pattern of the applied force, speed and duration of testing, sample configuration and test environment to be used for the wear testing of total knee-joint prostheses in wear-testing machines having axial load control, flexion/extension angular motion control, AP displacement control and tibial rotation control. The kinematics of this part of ISO 14243 may not be applicable to knee designs with a high degree of constraint, which could result in damage to the articulating components in the early stages of the test that would not be representative of clinical service.
信息:ICS:11.040.40 CCS:C35 发布:2005-01-06 实施:2005-01-06

DIN ISO 21940-21 Beiblatt 1-2020 机械振动. 转子平衡. 第21部分: 平衡机的描述和评估; 补充件1: 不平衡测量过程评估的统计质量能力参数
简介:This document specifies procedures and assessment criteria for the capability of unbalance measurement procedures; whereby the vector character of the variable
信息:ICS:21.120.40 CCS:N73 发布:2020-11-01 实施

HG/T 3109-2009 钢制机械搅拌容器型式与基本参数
简介:本标准规定了立式圆筒形钢制机械搅拌容器的型式、基本参数以及型号表示方法。 本标准适用于容积为0.040m3~200m,直径400mm~5800mm,设计压力(表压)-0.1MPa~15MPa,介质温度-40℃~350℃,动力黏度不大于500Pa·s,密度不大于2t/m3的液体介质的立式圆筒形钢制机械搅拌容器。 本标准不适用于无盖及直接火焰加热的搅拌容器。
信息:ICS:71.120.10;75.180.20;23.020.30 CCS:G93 发布:2009-02-05 实施:2009-07-01

GOST R 52420-2005 带底座的机械结构.二次电源系统.类型和基本参数
简介:
信息:ICS:29.200 CCS发布:2005 实施:2007-01-01

JB/T 13901.1-2020 机械伺服数控回转头压力机 第1部分:基本参数
简介:
信息:ICS:25.120.10 CCS:J62 发布:2020-04-16 实施:2021-01-01

JT/T 86-2009 港口装卸机械名称、基本参数及常用零部件图形
简介:本标准规定了港口装卸机械(以下简称“港机”)的名称、代号及型号,港机基本参数的名称、含义及符号,以及港机常用零部件的图形符号。本标准适用于港机的命名、标识,基本参数的确定,以及各类技术文件中的机械系统图示。
信息:ICS:03.220.40 CCS:R40 发布:2009-01-24 实施:2009-05-01

NP EN 1093-8-2000 机械安全.有害物质排放的评价.第8部分:污染物浓度参数的测量,通过测试平台进行
简介:Esta Norma Europeia especifica um método de ensaio em bancada para a medi??o do par?metro de concentra??o do poluente de uma subst?ncia perigosa propagada pelo ar emitida pelas máquinas utilizando uma bancada de ensaio em condi??es de opera??o específicas.Este método só é aplicável para a determina??o de gases, vapores e partículas respiráveis emitidas.Quando possível dever-se-á utilizar a determina??o da taxa de emiss?o numa bancada de ensaio (veja-se EN 1093-3).A medi??o do par?metro de concentra??o do poluente de uma máquina pode servir para a:a) avalia??o do desempenho de uma máquina;b) avalia??o do melhoramento de uma máquina;c) compara??o de máquinas dentro de grupos de máquinas com o mesmo domínio de utiliza??o (os grupos s?o definidos pela fun??o e materiais processados);d) classifica??o de máquinas do mesmo grupo de acordo com os par?metros de concentra??o do poluente;e) determina??o do estado da arte de máquinas em rela??o ao par?metro de concentra??o do poluente.
信息:ICS:13.040.40 CCS发布:2000-11 实施:2000-11

ISO 21360-3-2019 真空技术.真空泵性能测量的标准方法.第3部分:机械增压真空泵的特殊参数
简介:
信息:ICS:23.160 CCS发布:2019-01-30 实施

DIN EN 1093-8-2008 机械的安全性.气载有害物质排放的评估.第8部分:污染物浓度参数.试验台法
简介:This European Standard specifies a test bench method for the measurement of the pollutant concentrationparameter of a specified airborne hazardous substance from machines using a test bench under specifiedoperating conditions.This method is only applicable for the determination of emitted gases, vapours and respirable particles. IIThe determination of the emission rate in a test bench (see EN 1093-3) shall be used when possible.Measurement of the pollutant concentration parameter of a machine can serve for the:a) evaluation of the performance of a machine;b) evaluation of the improvement of the machine;c) comparison of machines within groups of machines with the same intended use (groups are defined by the function and materials processed),d) ranking of machines from the same group according to their pollutant concentration parameters;e) determination of the state of the art of machines with respect to their pollutant concentration parameter.
信息:ICS:13.040.40 CCS:C70 发布:2008-11 实施:2008-11-01

NP EN 1093-9-2000 机械安全.有害物质排放的评价.第9部分:污染物浓度参数的测量,通过房间进行
简介:Esta Norma Europeia especifica um método para medi??o em sala do par?metro de concentra??o do poluente da subst?ncia aérea perigosa especificada emitida pelas máquinas, situadas numa sala de ensaio e a funcionarem em condi??es definidas.Este método só pode ser utilizado com ventila??o por aspira??o local com caudal de ar > 500 m3/h e máquinas sem ar recirculado.A medida do par?metro de concentra??o do poluente de uma máquina pode servir para:a) avalia??o do desempenho de uma máquina.b) avalia??o do melhoramento da máquina.c) compara??o de máquinas dentro de grupos de máquinas utilizadas para o mesmo fim (os grupos s?o definidos pela fun??o e pelos materiais processados).d) classifica??o das máquinas do mesmo grupo de acordo com os respectivos par?metros de concentra??o do poluente.e) Determina??o do estado da arte das máquinas relativamente ao seu par?metro de concentra??o do poluente.
信息:ICS:13.040.40 CCS发布:2000-11 实施:2000-11

JB/T 12474.1-2015 焦炉机械 第1部分:型式与参数
简介:JB/T 12474的本部分规定了焦炉机械设备的型式、规格与基本参数。本部分适用于顶装煤和侧装煤捣固焦炉所配套的装煤车、推焦机、拦焦机、熄焦车、电机车、液压交换机、炉顶导烟车、捣固机、振动给料器等设备。
信息:ICS:77.180 CCS:H91 发布:2015-10-10 实施:2016-03-01

DIN EN 1093-9-2008 机械的安全性.气载有害物质排放的评估.第9部分:污染物浓度参数.室内法
简介:This European Standard specifies a room method for the measurement of the pollutant concentrationparameter of a specified airborne hazardous substance from machines, located in a test room and operatingthe machines under defined conditions.This method can only be used for machines with a local exhaust ventilation with an air flow rate 3 500 m3/hand machines without recirculated air.Measurement of the pollutant concentration parameter of a machine can serve for the:a) evaluation of the performance of a machine;b) evaluation of the improvement of the machine;c) comparison of machines within groups of machines with the same intended use (groups are defined by the function and materials processed);d) ranking of machines from the same group according to their pollutant concentration parameters;e) determination of the state of the art of machines with respect to their pollutant concentration parameter.
信息:ICS:13.040.40 CCS:Z60 发布:2008-11 实施:2008-11-01

DIN 879-3-1999 几何参数验证.线性测量用刻度指示仪.第3部分:带机械指示和电气限定触点的指示仪
简介:The document applies to dial indicators with electric limit contacts.
信息:ICS:17.040.30 CCS:J42 发布:1999-06 实施

NF S94-176-3-2014 外科植入物.全部膝关节假肢的磨损.第3部分:带位移控制和相应试验环境条件的磨损试验机械的承载和位移参数
简介:La présente partie de l'ISO 14243 décrit une méthode d'essai qui spécifie le mouvement angulaire relatif de flexion/extension entre les composants de l'articulation, le type de force appliquée, la vitesse et la durée des essais, la configuration de l'échantillon et l'environnement d'essai à utiliser pour les essais d'usure des prothèses totales de l'articulation du genou dans des machines d'essai d'usure avec contrôle de la charge axiale, du mouvement angulaire de flexion/extension, du déplacement AP et de la rotation tibiale.
信息:ICS:11.040.40 CCS:C45 发布:2014-12-19 实施:2014-12-19

NF E09-081-9/IN1-2008 机械安全.气载有害物质的排放评估.第9部分:用房间法测定污染物质浓度参数
简介:
信息:ICS:13.040.30;13.110 CCS:J09 发布:2008-09-01 实施

BS EN 1093-8-1998+A1-2008 机械安全.气载有害物质的排放评估.使用试验台方法测定污染物浓度参数
简介:This European Standard specifies a test bench method for the measurement of the pollutant concentrationparameter of a specified airborne hazardous substance from machines using a test bench under specifiedoperating conditions.This method is only applicable for the determination of emitted gases, vapours and respirable particles.The determination of the emission rate in a test bench (see EN 1093-3) shall be used when possible.Measurement of the pollutant concentration parameter of a machine can serve for the:a) evaluation of the performance of a machine;b) evaluation of the improvement of the machine;c) comparison of machines within groups of machines with the same intended use (groups are defined bythe function and materials processed),d) ranking of machines from the same group according to their pollutant concentration parameters;e) determination of the state of the art of machines with respect to their pollutant concentration parameter.
信息:ICS:13.040.40;23.120 CCS:C70 发布:1999-01-15 实施:1999-01-15

BS ISO 14243-3-2014 外科植入物.全部膝关节假肢的磨损.带位移控制和相关试验环境条件的磨损试验机械的负载和位移参数
简介:
信息:ICS:11.040.40 CCS:C35 发布:2014-10-31 实施:2014-10-31

NF E09-081-9-2008 机械安全.空气中危险物质排放的评定.第9部分:用房间法测定污染物浓度参数
简介:
信息:ICS:13.040.40 CCS:J09 发布:2008-09-01 实施:2008-09-20

BS EN 1093-9-1998+A1-2008 机械安全.气载有害物质的排放评估.污染物浓缩参数.室内法
简介:This European Standard specifies a room method for the measurement of the pollutant concentrationparameter of a specified airborne hazardous substance from machines, located in a test room and operatingthe machines under defined conditions.This method can only be used for machines with a local exhaust ventilation with an air flow rate ³ 500 m3/hand machines without recirculated air.Measurement of the pollutant concentration parameter of a machine can serve for the:a) evaluation of the performance of a machine;b) evaluation of the improvement of the machine;c) comparison of machines within groups of machines with the same intended use (groups are defined bythe function and materials processed);d) ranking of machines from the same group according to their pollutant concentration parameters;e) determination of the state of the art of machines with respect to their pollutant concentration parameter.
信息:ICS:13.040.40 CCS:J04;Z60 发布:1999-01-15 实施:1999-01-15

BS ISO 14243-3-2014 外科植入物.全部膝关节假肢的磨损.带位移控制和相关试验环境条件的磨损试验机械的负载和位移参数
简介:
信息:ICS:11.040.40 CCS:C35 发布:2014-10-31 实施:2014-10-31

NF E09-081-8/IN1-2008 机械安全.气载有害物质的排放评估.第8部分:用试验台法测定污染物质浓度参数
简介:
信息:ICS:13.040.30;13.110 CCS:J09 发布:2008-09-01 实施

EN 1093-9-1998 机械的安全性.对漂浮在空气中的有害物质排放的评估.第9部分:污染物浓度参数.室内法.包含修改件A1-2008
简介:This European Standard specifies a room method for the measurement of the pollutant concentration parameter of a specified airborne hazardous substance from machines, located in a test room and operating the machines under defined conditions.This method can only be used for machines with a local exhaust ventilation with an air flow rate 3 500 m3/h and machines without recirculated air. Measurement of the pollutant concentration parameter of a machine can serve for the: a) evaluation of the performance of a machine; b) evaluation of the improvement of the machine; c) comparison of machines within groups of machines with the same intended use (groups are defined by the function and materials processed); d) ranking of machines from the same group according to their pollutant concentration parameters; e) determination of the state of the art of machines with respect to their pollutant concentration parameter.
信息:ICS:13.040.40 CCS发布:1998-09-01 实施

GOST ISO 21573-2-2013 建筑施工机械和设备. 混凝土泵. 第2部分. 技术参数的检验规程
简介:
信息:ICS:91.220 CCS发布:2013 实施:2015-01-01

EN 1093-8+A1-2008 机械的安全性.空气中有害物质的排放评价.第8部分:污染物浓度参数,台架试验方法
简介:This European Standard specifies a test bench method for the measurement of the pollutant concentration parameter of a specified airborne hazardous substance from machines using a test bench under specified operating conditions. This method is only applicable for the determination of emitted gases, vapours and respirable particles. The determination of the emission rate in a test bench (see EN 1093-3) shall be used when possible. Measurement of the pollutant concentration parameter of a machine can serve for the: a) evaluation of the performance of a machine; b) evaluation of the improvement of the machine; c) comparison of machines within groups of machines with the same intended use (groups are defined by the function and materials processed), d) ranking of machines from the same group according to their pollutant concentration parameters; e) determination of the state of the art of machines with respect to their pollutant concentration parameter.
信息:ICS:13.040.40 CCS:J09 发布:2008-07 实施

EN 1093-8-1998 机械安全.空气中有害物质排放的评估.第8部分:分组法测定污染物的浓度参数.包含修改件A1-2008
简介:This European Standard specifies a test bench method forThe measurement of the pollutant concentration parameter of a specified airborne hazardous substance from machines using a test bench under specified operating conditions.This method is only applicable forThe determination of emitted gases, vapours and respirable particles.The determination of the emission rate in a test bench (see EN 1093-3) shall be used when possible. Measurement of the pollutant concentration parameter of a machine can serve forThe:a) evaluation of the performance of a machine; b) evaluation of the improvement of the machine; c) comparison of machines within groups of machines withThe same intended use (groups are defined byThe function and materials processed), d) ranking of machines fromThe same group according toTheir pollutant concentration parameters; e) determination of the state of the art of machines with respect toTheir pollutant concentration parameter.
信息:ICS:13.040.40 CCS发布:1998-09-01 实施

KS B ISO 21573-2-2012 建筑设计机械与设备.混凝土泵.第2部分:根据技术参数的检查步骤
简介:이 표준은 KS B ISO 21573-1에서 정의된 콘크리트 펌프의 기술적 사양 및 상용
信息:ICS:91.220 CCS:P01 发布:2012-12-26 实施:2012-12-26

EN 1093-9+A1-2008 机械的安全性.空气中有害物质的排放评价.第9部分:污染物浓度参数,室法
简介:This European Standard specifies a room method for the measurement of the pollutant concentration parameter of a specified airborne hazardous substance from machines, located in a test room and operating the machines under defined conditions. This method can only be used for machines with a local exhaust ventilation with an air flow rate 3 500 m3/h and machines without recirculated air. Measurement of the pollutant concentration parameter of a machine can serve for the: a) evaluation of the performance of a machine; b) evaluation of the improvement of the machine; c) comparison of machines within groups of machines with the same intended use (groups are defined by the function and materials processed); d) ranking of machines from the same group according to their pollutant concentration parameters; e) determination of the state of the art of machines with respect to their pollutant concentration parameter.
信息:ICS:13.040.40 CCS:J09 发布:2008-07 实施

BS DD ENV 13093-1998 公交运输.道路车辆.司机操纵台机械接口的要求.小型显示器和小键盘区参数
简介:
信息:ICS:43.080.20;45.060.01 CCS:T26 发布:1998-07-15 实施:1998-07-15

我们的实力

我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力

部分实验仪器

实验仪器 实验仪器 实验仪器 实验仪器

合作客户

我们的实力

注意:因业务调整,暂不接受个人委托测试望见谅。