房间声学测量检测标准房间声学测量-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

房间声学测量相关标准参考信息

GB/T 36075.2-2018 声学室内声学参量测量第2部分：普通房间混响时间
简介：
信息：ICS：91.120.20 CCS：A59 发布：2018-03-15 实施：2018-10-01 00:00:00.0

NF S31-012-2-2010 声学.房间声学参数的测量.第2部分:普通房间的混响时间
简介：
信息：ICS：91.120.20 CCS：P31 发布：2010-09-01 实施：2010-09-04

DIN EN ISO 10848-1-2006 声学.邻接房间之间空气和碰撞噪音侧向传声的实验室测量.第1部分:框架文献(ISO 10848-1-2006)
简介：
信息：ICS：91.120.20 CCS：P31;Y55 发布：2006-08 实施：

GB/T 36075.2-2018 声学室内声学参量测量第2部分:普通房间混响时间
简介：GB/T 36075的本部分规定了普通房间混响时间的测量方法、测量步骤、测量设备、测点数量、结果评价和测试报告式样。测量结果可用于声源声压级测量和隔声测量等声学测量中修正项的计算，并可用于与房间的混响时间设计要求进行比较。
信息：ICS：91.120.20 CCS：A59 发布：2018-03-15 实施：2018-10-01

NF S31-012-1-2010 声学.房间声学参数的测量.第1部分:演出空间.
简介：
信息：ICS：91.120.20 CCS：P31 发布：2010-09-01 实施：2010-09-25

DIN EN ISO 10848-2-2006 声学.邻接房间之间空气和碰撞噪音侧向传声的实验室测量.第2部分:当连接有一点小影响时轻元素的应用(ISO 10848-2-2006)
简介：The general standard describes measurement methods to be performed in dedicated test facility in order to characterise the performances of one or several building components regarding the flanking transmissions. These performances can be used to compare different products, or to express a requirement, or to input into prediction methods, such as the series EN 12354-1 and EN 12354-2.,,
信息：ICS：91.120.20 CCS：P31 发布：2006-08 实施：

GB/T 19889.4-2005 声学建筑和建筑构件隔声测量第4部分:房间之间空气声隔声的现场测量
简介：GB/T 19889的本部分规定了两房间之间在扩散声场的条件下内墙、楼板和门空气声隔声性能的现场测量方法，以及提供给房屋使用者确定的隔声效果的方法。此方法给出随频率变化的空气隔声量。运用GB/T 50121，可以把隔声量转化为表征声学特性的单值评价量。测量结果可用于比较房间之间的隔声性能，以及将实际隔声量与规定的要求作比较。
信息：ICS：91.120.30 CCS：A59 发布：2005-09-09 实施：2006-04-01

ISO 10848-4-2010 声学.邻接房间之间气载声和碰撞噪音侧向传声的实验室测量.第4部分:带至少一个重型元件的接头应用
简介：
信息：ICS：91.120.20 CCS：P31 发布：2010-08 实施：

DIN EN ISO 18233-2006 声学.建筑物和房间声学新测量方法的应用(ISO 18233-2006)
简介：
信息：ICS：91.120.20 CCS：P31 发布：2006-08 实施：

ISO 3382-3-2022 声学.房间声学参数的测量.第3部分:开放式办公室
简介：
信息：ICS：91.120.20 CCS：发布：2022-01-03 实施：

DIN EN ISO 3382-1-2009 声学.房间声学参数的测量.第1部分:表演场所(标准3382-1:2009),DIN EN ISO 3382-1:2009-10的英文版本
简介：This part of ISO 3382 specifies methods for the measurement of reverberation time and other room acousticalparameters in performance spaces. It describes the measurement procedure, the apparatus needed, thecoverage required, and the method of evaluating the data and presenting the test report It is intended for theapplication of modern digital measuring techniques and for the evaluation of room acoustical parametersderived from impulse responses.
信息：ICS： CCS：P31 发布：2009-10 实施：

DIN EN ISO 10848-3-2006 声学.邻接房间之间空气和碰撞噪音侧向传声的实验室测量.第3部分:当连接有实质性影响时轻元素的应用(ISO 10848-3-2006)
简介：
信息：ICS：91.120.20 CCS：P31;Y55 发布：2006-08 实施：

ISO 10848-5-2020 声学相邻房间间空气、撞击和建筑服务设备声音侧翼传输的实验室和现场测量第5部分:建筑构件的辐射效率
简介：
信息：ICS：91.120.20 CCS：发布：2020-08-17 实施：

DIN EN ISO 3382-2 Berichtigung 1-2009 声学.房间声学参数的测量.第2部分:普通房间的混响时间(ISO 3382-2-2008).德文版本EN ISO 3382-2-2008,DIN EN ISO 3382-2-2008-09标准的勘误表.德文版本EN ISO 3382-2-2008/AC-2009
简介：
信息：ICS： CCS：P31 发布：2009-09 实施：

EN ISO 18233-2006 声学.应用建筑物和房间声学的新测量方法 ISO 18233-2006
简介：
信息：ICS：91.120.20 CCS：发布：2006-06-01 实施：

ISO 10848-5:2020 声学相邻房间间空气、撞击和建筑服务设备声音侧翼传输的实验室和现场测量第5部分:建筑构件的辐射效率
简介：
信息：ICS：91.120.20 CCS：发布：2020-08-17 实施：

BS EN ISO 3382-1-2009 声学.房间声学参数的测量.第1部分:性能空间(ISO3382-1-2009)
简介：This part of ISO 3382 specifies methods for the measurement of reverberation time and other room acousticalparameters in performance spaces. It describes the measurement procedure, the apparatus needed, thecoverage required, and the method of evaluating the data and presenting the test report. It is intended for theapplication of modern digital measuring techniques and for the evaluation of room acoustical parametersderived from impulse responses.
信息：ICS：91.120.20 CCS：P31 发布：2009-08-31 实施：2009-08-31

ISO 18233-2006 声学.建筑物和房间声学新测量方法的应用
简介：This International Standard gives guidelines and specifies requirements for the application of new methods for the measurement of the acoustic properties of buildings and building elements. Guidelines and requirements for selection of the excitation signal, signal processing and environmental control are given, together with requirements for linearity and time-invariance for the systems to be tested.This International Standard is applicable to such measurements as airborne sound insulation between rooms and of facades, measurement of reverberation time and other acoustic parameters of rooms, measurement of sound absorption in a reverberation room, and measurement of vibration level differences and loss factor.This International Standard specifies methods to be used as substitutes for measurement methods specified in standards covering classical methods, such as ISO 140 (all parts), ISO 3382 (all parts) and ISO 17497-1.
信息：ICS：91.120.20 CCS：P31 发布：2006-06 实施：

KS F ISO 3382-1-2018 声学 - 房间声学参数测量 - 第1部分:性能空间
简介：
信息：ICS：91.120.20 CCS：发布：2018-03-16 实施：

BS EN ISO 10848-1-2006 声学.邻接房间之间空气和碰撞噪音侧向传声的实验室测量.框架文献
简介：ISO 10848-1:2006 contains definitions, general requirements for test specimens and test rooms, and methods for measurement of the flanking transmission. Guidelines are given for the selection of the quantity to be measured depending on the junction and the types of building elements involved.
信息：ICS：91.120.20 CCS：P32 发布：2006-04-28 实施：2006-04-28

KS F ISO 3382-2-2018 室内声学参数的测量第2部分:普通房间的混响时间
简介：
信息：ICS：91.120.20 CCS：发布：2018-03-16 实施：

EN ISO 3382-1-2009 声学.房间声学参数的测量.第1部分:表演场所［已代替:CEN EN ISO 3382］
简介：This part of ISO 3382 specifies methods for the measurement of reverberation time and other room acousticalparameters in performance spaces. It describes the measurement procedure; the apparatus needed; thecoverage required; and the method of evaluating the data and presenting the test report. It is intended for theapplication of modern digital measuring techniques and for the evaluation of room acoustical parametersderived from impulse responses.
信息：ICS：91.120.20 CCS：发布：2009-06-01 实施：

BS EN ISO 10848-2-2006 声学.邻接房间之间空气和碰撞噪音侧向传声的实验室测量.当连接有小影响时轻元素的应用
简介：ISO 10848-2:2006 applies to light elements such as suspended ceilings, access floors, light uninterrupted façades or floating floors. The transmission from one room to another can be simultaneous through the test element and via the plenum, if any. With measurements according to ISO 10848-2:2006, the total sound transmission is measured, and it is not possible to separate the two kinds of transmission.
信息：ICS：91.120.20 CCS：Z32 发布：2006-04-28 实施：2006-04-28

ISO 10848-4:2017 声学 - 相邻房间之间机载冲击和建筑物服务设备侧面传输的实验室和现场测量 - 第4部分:应用于至少一个A型元件的接头
简介：
信息：ICS：91.120.20 CCS：发布：2017-09-14 实施：

ISO 3382-1:2009 声学——房间声学参数的测量Spart 1:性能空间
简介：
信息：ICS：91.120.20 CCS：发布：2009-05-28 实施：

EN ISO 10848-2-2006 声学.邻接房间之间空气和碰撞噪音侧向传声的实验室测量.第2部分:当连接有一点小影响时轻元素的应用 ISO 10848-2-2006［代替:BSI BS EN ISO 140-12］
简介：ISO 10848 specifies measurement methods to be performed in a laboratory test facility in order to characterize the flanking transmission of one or several building components.The measured quantities may be used to compare different products, or to express a requirement, or as input data for prediction methods, such as EN 12354-1 and EN 12354-2.This part of ISO 10848 is specifically referred to in ISO 10848-1:2006, 4.4, as being a supporting part of the frame document.This part of ISO 10848 applies to light elements such as suspended ceilings, access floors, light uninterrupted fa?ades or floating floors. The transmission from one room to another can be simu
信息：ICS：91.120.20 CCS：发布：2006-04-28 实施：

ISO 10848-3:2017 声学 - 相邻房间之间机载冲击和建筑服务设备声音侧翼传输的实验室和现场测量 - 第3部分:当交界处有重大影响时应用于B型元件
简介：
信息：ICS：91.120.20 CCS：发布：2017-09-14 实施：

ISO 3382-2 Technical Corrigendum 1-2009 声学.房间声学参数的测量.第2部分:普通房间的混响时间.技术勘误1
简介：
信息：ICS：91.120.20 CCS：P31 发布：2009-04 实施：

BS EN ISO 10848-3-2006 声学.邻接房间之间空气和碰撞噪音侧向传声的实验室测量.当连接有实质性影响时轻元素的应用
简介：ISO 10848-3:2006 applies to structurally connected light elements forming a T or X junction. The performance of the building components is expressed either as an overall quantity for the combination of elements and junction, or as the vibration reduction index of a junction.
信息：ICS：91.120.20 CCS：Z32 发布：2006-04-28 实施：2006-04-28

ISO 10848-2:2017 声学 - 相邻房间之间机载冲击和建筑物服务设备侧翼传输的实验室和现场测量 - 第2部分:当接头影响小时适用于B型元件
简介：
信息：ICS：91.120.20 CCS：发布：2017-09-14 实施：

BS EN ISO 3382-2-2008 声学.房间声音参数的测量.第2部分:普通房间的混响时间
简介：This part of ISO 3382 specifies methods for the measurement of reverberation time in ordinary rooms. Itdescribes the measurement procedure, the apparatus needed, the required number of measurement positions,and the method for evaluating the data and presenting the test report.The measurement results can be used for correction of other acoustic measurements, e.g. sound pressurelevel from sound sources or measurements of sound insulation, and for comparison with requirements forreverberation time in rooms.
信息：ICS：91.120.20 CCS：A59 发布：2008-10-31 实施：2008-10-31

EN ISO 10848-3-2006 声学.邻接房间之间空气和碰撞噪音侧向传声的实验室测量.第3部分:当连接有实质性影响时轻元素的应用 ISO 10848-3-2006
简介：
信息：ICS：91.120.20 CCS：发布：2006-04-06 实施：

ISO 10848-1:2017 声学 - 相邻房间之间机载冲击和建筑物服务设备侧翼传输的实验室和现场测量 - 第1部分:框架文件
简介：
信息：ICS：91.120.20 CCS：发布：2017-09-14 实施：

DIN EN ISO 3382-2-2008 声学.房间声学参数的测量.第2部分:普通房间的混响时间
简介：This part of ISO 3382 specifies methods for the measurement of reverberation time in ordinary rooms. Itdescribes the measurement procedure, the apparatus needed, the required number of measurement positions,and the method for evaluating the data and presenting the test report.The measurement results can be used for correction of other acoustic measurements, e.g. sound pressurelevel from sound sources or measurements of sound insulation, and for comparison with requirements forreverberation time in rooms.
信息：ICS： CCS：P31 发布：2008-09 实施：

EN ISO 10848-1-2006 声学.邻接房间之间空气和碰撞噪音侧向传声的实验室测量.第1部分:框架文献
简介：ISO 10848 specifies measurement methods to be performed in a laboratory test facility in order tocharacterize the flanking transmission of one or several building components. The performance of the buildingcomponents is expressed either as an overall quantity for the combination of elements and junction (such asDn,f and/or Ln,f ) or as the vibration reduction index Kij of a junction.
信息：ICS：91.120.20 CCS：发布：2006-04-01 实施：

GOST R ISO 3382-2-2013 声学. 室内声学参数的测量. 第2部分. 普通房间的混响时间
简介：
信息：ICS：91.120.20 CCS：发布：2013 实施：2014-12-01

ISO 3382-2:2008 声学——房间声学参数的测量Spart 2:普通房间中的混响时间
简介：
信息：ICS：91.120.20 CCS：发布：2008-06-12 实施：

ISO 10848-3-2006 声学.邻接房间之间气载声和碰撞噪音侧向传声的实验室测量.第3部分:当连接处有实质性影响时轻型构件的应用
简介：ISO 10848 specifies measurement methods to be performed in a laboratory test facility in order to characterize the flanking transmission of one or several building components.The measured quantities can be used to compare different products, or to express a requirement, or as input data for prediction methods, such as EN 12354-1 and EN 12354-2.This part of ISO 10848 is specifically referred to in ISO 10848-1:2006, 4.4, as being a supporting part to the frame document.This part of ISO 10848 applies to structurally connected light elements forming a T or X junction. A light element is defined in ISO 10848-1:2006, Clause 3.The relevant quantity to be measured is selected according to ISO 10848-1:2006, 4.4. The performance of the building components is expressed either as an overall quantity for the combination of elements and junction (such as Dn, f and/or Ln ,f) or as the vibration reduction index Kij of a junction. Dn, f and Ln, f depend on the actual dimensions of the elements, while Kij is in principle an invariant quantity.For general application of the test results, Dn, f and Ln ,f are the relevant quantities to measure for lightweight, well-damped types of elements (for example, timber or metal framed stud walls or wooden floors on beams), where the actual situation has no real influence on the sound reduction index and damping of the elements. If the acoustical properties of the elements are substantially influenced by the actual situation, Kij is the relevant quantity to measure.
信息：ICS：91.120.20 CCS：P31 发布：2006-04 实施：

KS F 2864-2012(2017) 参考其他声学参数测量房间的混响时间
简介：
信息：ICS：91.120.20 CCS：发布：2012-09-13 实施：

EN ISO 3382-2-2008 声学.房间声音参数的测量.第2部分:普通房间的混响时间
简介：This part of ISO 3382 specifies methods for the measurement of reverberation time in ordinary rooms. Itdescribes the measurement procedure, the apparatus needed, the required number of measurement positions,and the method for evaluating the data and presenting the test report.
信息：ICS：91.120.20 CCS：发布：2008-06-01 实施：

ISO 10848-2-2006 声学.邻接房间之间气载声音和碰撞噪音侧向传声的实验室测量.第2部分:当连接处有小影响时轻型构件的应用
简介：ISO 10848 specifies measurement methods to be performed in a laboratory test facility in order to characterize the flanking transmission of one or several building components.The measured quantities may be used to compare different products, or to express a requirement, or as input data for prediction methods, such as EN 12354-1 and EN 12354-2.This part of ISO 10848 is specifically referred to in ISO 10848-1:2006, 4.4, as being a supporting part of the frame document.This part of ISO 10848 applies to light elements such as suspended ceilings, access floors, light uninterrupted facades or floating floors. The transmission from one room to another can be simultaneous through the test element and via the plenum, if any. With measurements according to this part of ISO 10848, the total sound transmission is measured, and it is not possible to separate the two kinds of transmission. The measured quantities Dn, f and Ln, f depend on the actual dimensions of the test specimen.A light element is defined in ISO 10848-1:2006, Clause 3.
信息：ICS：91.120.20 CCS：P31 发布：2006-04 实施：

KS F 2864-2012(2022) 参考其他声学参数测量房间的混响时间
简介：
信息：ICS：91.120.20 CCS：发布：2012-09-13 实施：

ISO 3382-2-2008 声学.房间声学参数的测量.第2部分:普通房间的混响时间
简介：This part of ISO 3382 specifies methods for the measurement of reverberation time in ordinary rooms. Itdescribes the measurement procedure, the apparatus needed, the required number of measurement positions,and the method for evaluating the data and presenting the test report.The measurement results can be used for correction of other acoustic measurements, e.g. sound pressurelevel from sound sources or measurements of sound insulation, and for comparison with requirements forreverberation time in rooms.
信息：ICS：91.120.20 CCS：Z32 发布：2008-06 实施：

ISO 10848-1-2006 声学.邻接房间之间气载声音和碰撞噪音侧向传声的实验室测量.第1部分:框架文献
简介：ISO 10848 specifies measurement methods to be performed in a laboratory test facility in order to characterize the flanking transmission of one or several building components. The performance of the building components is expressed either as an overall quantity for the combination of elements and junction (such as Dn ,f and/or Ln ,f) or as the vibration reduction index Kij of a junction.This part of ISO 10848 contains definitions, general requirements for test specimens and test rooms, and measurement methods. Guidelines are given for the selection of the quantity to be measured depending on the junction and the types of building elements involved. Other parts of ISO 10848 specify the application for different types of junction and building elements.The quantities characterizing the flanking transmission can be used to compare different products, or to express a requirement, or as input data for prediction methods, such as EN 12354-1 and EN 12354-2.
信息：ICS：91.120.20 CCS：P31 发布：2006-04 实施：

ISO 3382-3:2012 声学——房间声学参数测量Spart 3:开放式办公室
简介：
信息：ICS：91.120.20 CCS：发布：2012-01-24 实施：

ISO 3382-2-2008 cor1-2009 声学.房间声学参数的测量.第2部分:普通房间的混响时间技术勘误表
简介：
信息：ICS： CCS：发布：2008-01-01 实施：2008-01-01

ISO 10848-1:2006 声学——相邻房间之间空气传播和冲击声侧翼传播的实验室测量Spart 1:框架文件
简介：
信息：ICS：91.120.20 CCS：发布：2006-03-20 实施：

BS EN 15726-2011 建筑物通风.空气扩散.在装有空调/通风装置的房间所占区域进行测量以评估热学和声学情况
简介：
信息：ICS：91.140.30 CCS：Q76 发布：2011-11-30 实施：2011-11-30

NF S31-097-1-2006 声学.邻接房间气载声和碰撞噪音侧向传输的实验室测量.第1部分:框架文献
简介：
信息：ICS：91.120.20 CCS：P31 发布：2006-11-01 实施：2006-11-20

KS F ISO 140-12-2005 声学.建筑物和建筑构件的隔声测量.第12部分:房间对房间的空气声和共有楼板的撞击声的隔声的实验室测量
简介：이 규격은 두 실을 분리하는 장벽 아래 규정된 높이의 바닥 공간을 지닌 이중 바닥 구조의
信息：ICS：17.140.40 CCS：Z32 发布：2005-09-02 实施：2005-09-02

BS EN ISO 10848-4-2010 声学.邻接房间之间气载声音和碰撞噪音侧向传声的实验室测量.连接处有至少一个重型构件的应用
简介：
信息：ICS：91.120.20 CCS：P31 发布：2011-01-31 实施：2011-01-31

BS EN ISO 18233-2006 声学.应用建筑物和房间声学的新测量方法
简介：ISO 18233:2006 gives guidelines and specifies requirements for the application of new methods for the measurement of the acoustic properties of buildings and building elements. Guidelines and requirements for selection of the excitation signal, signal processing and environmental control are given, together with requirements for linearity and time-invariance for the systems to be tested.ISO 18233:2006 is applicable to such measurements as airborne sound insulation between rooms and of façades, measurement of reverberation time and other acoustic parameters of rooms, measurement of sound absorption in a reverberation room, and measurement of vibration level differences and loss factor.ISO 18233:2006 specifies methods to be used as substitutes for measurement methods specified in standards covering classical methods, such as ISO 140 (all parts), ISO 3382 (all parts) and ISO 17497-1.
信息：ICS：91.120.20 CCS：P31 发布：2006-10-31 实施：2006-10-31

GOST R 54579-2011 声学.建筑物和房间声学新测量方法的应用
简介：
信息：ICS：91.120.20;17.140.20 CCS：发布：2011-01-01 实施：2012-12-01

NF S31-908-2006 声学.建筑物和房间声学新测量法应用
简介：
信息：ICS：91.120.20 CCS：P31 发布：2006-10-01 实施：2006-10-20

BS EN ISO 140-12-2000 声学.建筑物和建筑构件的隔音测量.房间与房间空气和进门处冲击声隔绝的实验室测量
简介：This standard specifies a laboratory method to measure the airborne and impact sound insulation of an access floor with a plenum of defined height mounted below an acoustical barrier which separates two rooms of a specified test facility.This method utilizes a laboratory space arranged in such a manner that it simulates a pair of horizontally adjacent, typical offices or rooms sharing a common access floor system, plenum space and a dividing wall. The dividing wall extends from the ceiling to the upperside of the floor system which at the junction is either continuous or discontinuous.The quantities being measured are the airborne and impact sound insulation between two rooms of a specified test facility when the sound transmitted by paths other than the access floor and common plenum space is negligible. These quantities are called the normalized flanking level difference and the normalized flanking impact sound pressure level.The method can be extended to the study of the additional sound insulation that can be achieved by auxiliary systems, such as material used either as plenum barriers or as backing for all of, or part of the floor.
信息：ICS：91.120.20 CCS：P31 发布：2000-04-15 实施：2000-04-15

EN 15726-2011 建筑通风-空气扩散测量占领区内的空调/通风房间来评估热和声学条件
简介：This European Standard is applicable to measure some parameters of thermal and acoustic comfort (i.e. temperatures, air velocities...) in a room with an air diffusion system.This European Standard can be used on site or in a lab for full-scale measurements.This European Standard applies to ventilation or air conditioning systems designed to maintain the comfort conditions in buildings. It is not applicable in the case of systems for the control of industrial or other special process environments. NOTE In the latter case however, it may be referred to if the system technology is similar to that of the above mentioned ventilation and air conditioning systems.
信息：ICS：91.140.30 CCS：发布：2011 实施：

ISO 14934-3-2006 声学.房间声学参数的测量.第3部分: 二级校准方法
简介：This part of ISO 14934 specifies a method for the calibration of heat flux meters for use in fire testing.This method applies only to instruments having plane sensing surfaces. It does not apply to sensing surfacesin the form of wires, spheres, etc.Annex A gives information on the accuracy of the calibration. It is intended that reference be made to theInternational Standard describing the test for which the heat flux meter is intended. Annex B gives guidanceon the care of heat flux meters. Annex C gives guidance notes concerning calibration.
信息：ICS：13.220.50;13.220.40 CCS：P31 发布：2006-09-15 实施：

ISO 140-12:2000 声学.建筑物和建筑构件的隔声测量.第12部分:通道地板房间间空气和冲击隔声的实验室测量
简介：
信息：ICS：91.120.20 CCS：发布：2000-02-03 实施：