耐液体材料检测标准耐液体材料-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

耐液体材料相关标准参考信息

KS K ISO 13994-2021 液体化学品防护服.防护服材料在压力下耐液体渗透性的测定
简介：
信息：ICS：13.340.10 CCS：发布：2021-07-01 实施：

ASTM F903-03(2004) 防护服用材料耐液体渗透性的标准试验方法
简介：
信息：ICS：13.340.10 CCS：发布：2004-06-01 实施：

prEN 369-1992 防护服.防液体化学品.试验方法.材料耐液体渗透性能
简介：
信息：ICS： CCS：C73 发布：1992-08 实施：

ASTM F903-18 防护服用材料耐液体渗透性的标准试验方法
简介：
信息：ICS：13.340.10 CCS：发布：2018-07-01 实施：

ASTM F903-03 防护服用材料耐液体渗透性的标准试验方法
简介：
信息：ICS：13.340.10 CCS：发布：2003-01-10 实施：

AS 1580.454.1-2002 涂料和相关材料.试验方法.耐矿物油和其他有机液体
简介：
信息：ICS：87.040 CCS：发布：实施：

ASTM F1407-12(2017) 化学防护服材料耐液体渗透性的标准试验方法&x2014；渗透杯法
简介：
信息：ICS：13.340.10 CCS：发布：2017-06-01 实施：

ASTM F903-2003(2004) 防护服材料耐液体渗透的标准试验方法
简介：This test method is normally used to evaluate the barrier effectiveness against liquids of materials used for protective clothing and specimens from finished items of protective clothing. 5.1.1 Finished items of protective clothing include gloves, arm shields, aprons, suits, hoods, boots, and the like. 5.1.2 The phrase x201C;specimens from finished itemsx201D; encompasses seamed and other discontinuous regions as well as the usual continuous regions of protective clothing items. A substitute challenge liquid (for example, water) is appropriate in some cases. However, it is possible that differences in chemical and molecular properties (for example, surface tension) lead to different results. 1.1 This test method is used to test specimens of protective clothing and candidate materials and constructions to be used in protective clothing. The resistance to visible penetration of the test liquid is determined with the liquid in continuous contact with the normally outside surface of the test specimen.1.2 In some cases, significant amounts of hazardous materials will permeate specimens that pass the penetration tests. For more sensitive analysis use Test Method F 739 to determine permeation.1.3 This test method is not applicable to finger tips or crotch areas of gloves, which are possible failure points.1.4 The values as stated in inch-pound units are to be regarded as the standard. The values in brackets are for information only.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards are given in Section 7.
信息：ICS：13.340.10 (Protective clothing) CCS：C73 发布：2003 实施：

AS 1180.7B-1972 弹性材料制软管的测试方法．耐液体性．物理方法
简介：
信息：ICS：83.140.40 CCS：发布：实施：

ASTM D5322-17 用于评估土工合成材料对液体的耐化学性的实验室浸渍程序的标准实践
简介：
信息：ICS：59.080.70 CCS：发布：2017-06-01 实施：

ASTM F903-2003 防护服材料耐液体渗透的标准试验方法
简介：1.1 This test method is used to test specimens of protective clothing and candidate materials and constructions to be used in protective clothing. The resistance to visible penetration of the test liquid is determined with the liquid in continuous contact with the normally outside surface of the test specimen. 1.2 In some cases, significant amounts of hazardous materials will permeate specimens that pass the penetration tests. For more sensitive analysis use Test Method F 739 to determine permeation. 1.3 This test method is not applicable to finger tips or crotch areas of gloves, which are possible failure points. 1.4 The values as stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards are given in Section 7.
信息：ICS：13.340.10 (Protective clothing) CCS：C73 发布：2003 实施：

AS 1580.454.1-2002 涂料和相关材料.试验方法.耐矿物油和其他有机液体
简介：
信息：ICS：87.040 CCS：发布：实施：

ASTM F903-17 防护服用材料耐液体渗透性的标准试验方法
简介：
信息：ICS：13.340.10 CCS：发布：2017-02-01 实施：

ISO 6529:2001 防护服.化学品防护.防护服材料耐液体和气体渗透性的测定
简介：
信息：ICS：13.340.10 CCS：发布：2001-10-25 实施：

AS 1180.7B-1972 弹性材料制软管的测试方法．耐液体性．物理方法
简介：
信息：ICS：83.140.40 CCS：发布：实施：

KS K ISO 6530-2016(2021) 防护服液体化学品防护材料耐液体渗透性试验方法
简介：
信息：ICS：13.340.10 CCS：发布：2016-12-28 实施：

ASTM F903-99a 防护服用材料耐液体渗透性的标准试验方法
简介：
信息：ICS：13.340.10 CCS：发布：1999-06-10 实施：

简介： 信息：

ISO 6529:2013 防护服——防止化学品和垃圾；防护服材料耐液体和气体渗透性的测定
简介：
信息：ICS：13.340.10 CCS：发布：2013-02-21 实施：

ASTM F739-99a 连续接触条件下防护服材料耐液体或气体渗透性的标准试验方法
简介：
信息：ICS：13.340.10 CCS：发布：1999-06-10 实施：

简介： 信息：

GOST 12.4.239-2013 职业安全标准体系.防液体化工品用专用工作服.耐液体渗透用不透气材料的测定方法
简介：
信息：ICS：13.340.10 CCS：发布：2013 实施：2014-03-01

ASTM F1407-99a 化学防护服材料耐液体渗透渗透法的标准试验方法
简介：
信息：ICS：13.340.10 CCS：发布：1999-06-10 实施：

简介： 信息：

GOST ISO 6530-2012 职业安全标准体系.液体化工制品防护服.材料耐液体渗透性的测定方法
简介：
信息：ICS：13.340.10 CCS：发布：2012 实施：2013-09-01

ASTM F1383-99a 间歇接触条件下防护服材料耐液体或气体渗透性的标准试验方法
简介：
信息：ICS：13.340.10 CCS：发布：1999-06-10 实施：

简介： 信息：

ASTM F1407-2012 化学防护服材料耐液体渗透性的标准试验方法; 渗透杯法
简介：This test method establishes a standard procedure for rapidly (in 1 h or less) determining the chemical resistance of specimens of protective clothing materials. This test method can be used to rank materials as to their suitability for use with liquids of known or unknown composition. The breakthrough detection time, permeation rate, or cumulative permeation can be used to identify protective clothing materials that are more likely to limit potential exposures to chemicals. Longer breakthrough detection times and lower cumulative amounts permeated and permeation rates are characteristics of materials that are better barriers to the test chemical. In general this test method is less sensitive than Test Method F739 coupled with sensitive analytical procedures. In cases where the chemical of concern is highly toxic and contact of even a very small amount with the skin may be detrimental to health, the permeation cup method is not recommended. Use Test Method F739. Upon permeating the clothing material, the chemical must evaporate in order for a weight loss to occur and permeation to be detected. Consequently, the test method may not be applicable for chemicals having low volatility (that is, vapor pressure). The vapor pressure below which this test method is not applicable has not been determined. A procedure for assessing volatility is described in Section 10. The results of this test method are highly dependent on the test temperature. If the objective is to compare different clothing materials, all tests shall be conducted at the same temperature (x00B1;3x00B0;C). 1.1 This test method measures the barrier effectiveness of a specimen of protective clothing upon continuous contact with a liquid. 1.1.1 Procedure A8212;For use when a value for the cumulative amount of chemical permeated in 1 h is desired. 1.1.2 Procedure B8212;For use when breakthrough detection time and permeation rate values are desired. 1.2 Although not addressed herein, the effect of the test chemical on the clothing material can be determined by comparing the weight or other physical properties of the specimen before and after the permeation test. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 2.
信息：ICS：13.340.10 (Protective clothing) CCS：C73 发布：2012 实施：

ASTM F903-1999a 防护服材料耐液体渗透的试验方法
简介：1.1 This test method is used to test specimens of protective clothing and candidate materials and constructions to be used in protective clothing. The resistance to visible penetration of the test liquid is determined with the liquid in continuous contact with the normally outside surface of the test specimen. 1.2 In some cases, significant amounts of hazardous materials will permeate specimens that pass the penetration tests. For more sensitive analysis use Test Method F739 to determine permeation. 1.3 This test method is not applicable to finger tips or crotch areas of gloves, which are possible failure points. 1.4 The values as stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards are given in Section 7.
信息：ICS：13.340.10 (Protective clothing) CCS：C73 发布：1999 实施：

简介： 信息：

ASTM F1407-11 化学防护服材料耐液体渗透渗透法的标准试验方法
简介：
信息：ICS：13.340.10 CCS：发布：2011-07-01 实施：

ASTM F739-1999a 连续接触条件下防护服材料耐液体或气体渗透的试验方法
简介：1.1 This test method measures the resistance of protective clothing materials to permeation by liquid or gaseous chemicals under the condition of continuous contact. 1.1.1 Procedure A -For use when the test chemical is a liquid that is either volatile or soluble in water. 1.1.2 Procedure B -For use when the test chemical is a gas. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 7.
信息：ICS：13.340.10 (Protective clothing) CCS：C73 发布：1999 实施：

简介： 信息：

GOST R 12.4.262-2011 职业安全标准体系.对液态化学制品的专用防护服.材料耐液体和气体渗透性的测定方法
简介：
信息：ICS：13.340.10 CCS：发布：2011 实施：2012-12-01

ISO 13994:1998 液体化学品防护服.防护服材料在压力下耐液体渗透性的测定
简介：
信息：ICS：13.340.10 CCS：发布：1998-09-10 实施：

简介： 信息：

DIN EN 50348-2010 耐燃液体涂覆材料的固定静电应用设备.安全性要求;德文版本EN 50348-2010 + Cor.-2010
简介：
信息：ICS：87.100 CCS：J47;K64 发布：2010-08 实施：2010-08-01

ASTM D5322-98 用于评估土工合成材料对液体的耐化学性的浸渍程序的标准实践
简介：
信息：ICS：59.080.70 CCS：发布：1998-05-10 实施：

简介： 信息：

ASTM F903-10 防护服用材料耐液体渗透性的标准试验方法
简介：
信息：ICS：13.340.10 CCS：发布：2010-01-01 实施：

ASTM D5322-98(2003) 用于评估土工合成材料对液体的耐化学性的浸渍程序的标准实践
简介：
信息：ICS：59.080.70 CCS：发布：1998-05-10 实施：

简介： 信息：

ASTM D5322-98(2009) 用于评估土工合成材料对液体的耐化学性的浸渍程序的标准实践
简介：
信息：ICS：59.080.70 CCS：发布：2009-06-01 实施：

DS/EN 369-1994 防护服．防液体化学品．试验方法材料的耐液体渗透性
简介：This standard describes a laboratory test method that enables an assessment to be made of the resistance to permeation by liquids afforded by clothing materials.The test method assesses the breakthrough time under laboratory conditions. It also enables observations to be made of the effects of the test liquid on the material under test.It is emphasized that the test does not necessarily simulate conditions that clothing materials are likely to be exposed to in practice. The use of test data should therefore be restricted to the broad comparative assessment of such materials according to their permeation characteristics.This test measures the permeation that arises from the combination of a process of diffusion of a test liquid from one side of a material to another together with a secondary process of desorption into a collecting medium.The rate of the secondary process is influenced by the diffusion rate of the liquid through the material, by the degree of distortion and gradual extension of the test specimen as increasing amounts of liquid are absorbed and by the experimental procedures used to collect and analyse the diffused liquid.
信息：ICS： CCS：发布：1994-01-13 实施：

简介： 信息：

DIN 6601-2007 钢容器材料的耐液体侵蚀特性(正性液体表)
简介：The list of liquids shows the chemical name of those liquids which are intended to store in metallic tanks. Moreover the list contains instructions which have to be met by storage of these liquids.
信息：ICS：23.020.10 CCS：A82 发布：2007-04 实施：

DS/EN 368-1993 防护服．防液体化学品．试验方法材料的耐液体穿透性
简介：This European Standard is concerned with the application of the described method of test, usually with chemicals of low volatility. Clothing made of these materials is not for use as the sole means of protection where resistance to permeation by chemicals at the molecular level (see EN 369) is essential and where a complete barrier to liquid (or gaseous chemicals) is required (e.g. risk of exposure to massive and forceful discharges of concentrated liquid chemicals).Clothing, which has been developed from materials selected by this method of test, should be used therefore only in well-defined circumstances when an evaluation of the finished item has indicated an acceptable level of performance (e.g. in laboratory and field testing of a garment, consideration of exposure levels to specified chemicals, etc.).Two levels of the potential performance of materials are assessed by the method of test to meet with possible requirements for protection against:a) deposition on the surface of a material, at minimal pressure, of spray droplets up to coalescence or occasional small drips;b) contamination by a single copious splash or low pressure jet, allowing sufficient time to divest the clothing or take other action as necessary to eliminate any hazard to the wearer from chemical retained by the protective garment, or, in circumstances where pressure is applied to liquid contaminants on the surface of the clothing material as a result of natural movements of the wearer (flexing of contaminated areas of clothing at arms, knees, shoulders) and contact with contaminated surfaces (e.g. walking through sprayed foliage).
信息：ICS： CCS：发布：1993-12-16 实施：1993-12-16

简介： 信息：

AS/NZS ISO 6530-2006 防护服．液体化学品防护服．材料耐液体渗透性的试验方法
简介：Adopts ISO 6530:2005 to describe a laboratory test method for the measurement of indices of penetration, absorption and repellency for protective clothing materials against liquid chemicals, mainly chemicals of low volatility.
信息：ICS：13.340.10 CCS：发布：2006-02-24 实施：2006-03-31

NEN-EN 369-1993 防护服．耐液体化工产品防护．检验方法：材料耐液体穿透性能
简介：This Standard describes a laboratory test method that enables an assessment to be made of the resistance to permeation by liquids afforded by clothing materials.The test method assesses the breakthrough time under laboratory conditions. It also enables observations to be made of the effects of the test liquid on the material under test.It is emphasized that the test does not necessarily simulate conditions that clothing materials are likely to be exposed to in practice. The use of test data should therefore be restricted to the broad comparative assessment of such materials according to their permeation characteristics.This test measures the permeation that arises from the combination of a process of diffusion of a test liquid from one side of a material to another together with a secondary process of desorption into a collecting medium.The rate of the secondary process is influenced by the diffusion rate of the liquid through the material, by the degree of distortion and gradual extension of the test specimen as increasing amounts of liquid are absorbed and by the experimental procedures used to collect and analyse the diffused liquid.
信息：ICS： CCS：发布：1993-11 实施：1933-11

简介： 信息：

AS/NZS ISO 6529-2006 防护服．化学品防护服．防护服所用材料的耐液体和气体渗透性能的测定
简介：Adopts ISO？6529:2001 to describe laboratory test methods that enable a determination of the resistance of materials used in protective clothing to permeation by liquid or gaseous chemicals under the conditions of either continuous or intermittent contact.
信息：ICS：13.340.10 CCS：发布：2006-02-03 实施：2006-03-08

NF S74-507-1993 防护服.液体化学品防护.试验方法:材料耐液体渗透性
简介：
信息：ICS：13.340.10 CCS：C73 发布：1993-09-01 实施：1993-09-05

简介： 信息：

ASTM F1407-99a(2006) 化学防护服材料耐液体渗透渗透法的标准试验方法
简介：
信息：ICS：13.340.10 CCS：发布：2006-02-01 实施：

NF S74-506-1993 防护服.液体化学制品防护.试验方法:材料耐液体渗透性
简介：
信息：ICS：13.340.10 CCS：C73 发布：1993-03-01 实施：1993-03-05

简介： 信息：

ISO 13994:2005 液体化学品防护服——防护服材料在压力下耐液体渗透性的测定
简介：
信息：ICS：13.340.10 CCS：发布：2005-10-25 实施：

EN 368-1992 防护服.耐液体化学药物.试验方法:材料耐液体系统渗透性能
简介：
信息：ICS： CCS：C73 发布：1992-11 实施：

简介： 信息：