涂料检测检测标准涂料检测-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

涂料检测相关标准参考信息

GB/T 35241-2017 木质制品用紫外光固化涂料挥发物含量的检测方法
简介：
信息：ICS：79.060.99 CCS：B70 发布：2017-12-29 实施：2018-07-01 00:00:00.0

KS 03-161 Pt.1-1985 肯尼亚涂料；清漆；油漆和瓷釉检测标准方法
简介：This Kenya Standard specifies both the procedure for preliminary examination of a single sample as received for testing and the procedure for preparing a test sample by blending and reduction of a series of samples representative of a consignment or bulk of paint, varnish or related product.
信息：ICS： CCS：发布：1985-1-1 实施：

MSZ 9640/9-1980 涂料涂层和涂层系统检测．击打稳定性检测
简介：
信息：ICS： CCS：发布：1980 实施：

ASTM D3618-05(2022) 涂料和干漆膜中铅含量检测的标准试验方法
简介：
信息：ICS：87.040 CCS：发布：2022-12-01 实施：

KS 03-161 Pt.9-1985 肯尼亚涂料；清漆；油漆和瓷釉检测标准方法
简介：This Part of this Kenya Standard specifies a method to be used for determining the opacity (by contrast ratio measurement) given by paint films of white or light colours of reflectance value greater than 25 per cent, applied at a spreading rate of 20 m2/l to an agreed black and white substrate.
信息：ICS： CCS：发布：1985-1-1 实施：

MSZ 9640/36-1979 涂料涂层和涂层系统检测．加速腐蚀检测的评估
简介：
信息：ICS： CCS：发布：1979 实施：

DIN/TR 55684-2021 防护涂料系统对钢结构的腐蚀保护. 在涂覆涂料之前对表面进行测试,以检测肉眼无法发现的密闭性
简介：This document contains test to dedect oils, greases and waxes on for coating prepared steel surfaces.
信息：ICS：25.220.10 CCS：Q13 发布：2021-01-01 实施：

KS 03-161 Pt.11-1985 肯尼亚涂料；清漆；油漆和瓷釉检测标准方法
简介：This Kenya Standard specifies a general procedure for determining the resistance of single coatings or multicoat systems of paints or related products to the effect of heat.The procedure is applicable to products intended for use on domestic radiators or other articles likely to be subjected to similar temperatures.
信息：ICS： CCS：发布：1985-1-1 实施：

MSZ 9640/33-1979 涂料涂层和涂层系统检测．涂层相容性检测
简介：
信息：ICS： CCS：发布：1979 实施：

T/DJPEC 0004-2019 商品陈列柜台表层涂料、涂层外观检测技术规范
简介：本标准规定了新制商品陈列柜台的表层涂料、涂层外观品质的评判基准。本标准提及的商品陈列柜台是指以钢材为基础材料的用于商品售卖、展示的商品陈列柜台，使用场所多为室内或有雨雪遮蔽设施的室外场所。主要技术内容包括：涂装区域划分、涂装外观检查（包括检查条件、检查仪器、检查步骤、判定基准）以及涂膜特性基准。为商品陈列柜台的表层涂料、涂层外观的检测提供技术要求和可操作依据。
信息：ICS：25-010 CCS：C419 发布：2019-11-20 实施：2019-11-20

KS 03-161 Pt.8-1985 肯尼亚涂料；清漆；油漆和瓷釉检测标准方法
简介：This Kenya Standard specifies a method for assessing the light fastness of interior paints by exposure to light from artificial sources, under prescribed conditions which have teen shown to correlate acceptably with exposure to daylight through glass. For critical application the user should generally satisfy himself that the degree of correlation is acceptable for this purpose.
信息：ICS： CCS：发布：1985-1-1 实施：

SN 058 253-1979 油漆及染料工业．涂料检测．遮盖能力
简介：
信息：ICS： CCS：发布：1978-11-1 实施：

JGJ/T 287-2014 建筑反射隔热涂料节能检测标准
简介：本标准适用于新建、扩建及既有建筑墙面、屋面的建筑反射隔热涂料节能性能参数的检测。
信息：ICS： CCS：Q18 发布：2014-11-05 实施：2015-06-01

KS 03-161 Pt.5-1985 肯尼亚涂料；清漆；油漆和瓷釉检测标准方法
简介：This Kenya Standard specifies a standard procedure for determining the content of both 'volatile matter' and 'non-volatile matter' in paints, varnishes and related products for any specified temperature and period of heating.NOTE: The volatile matter content of a product (and consequently the non-volatile matter content also) is not an absolute quantity, but depends upon the temperature and period of heating used for the test. The temperature and period of heating recommended herein - i.e. 105 ± 2°C and 3 h respectively - are suitable for most purposes. If these conditions are unsuitable, for example because the product is likely to decompose at 105°C, they shall be varied by agreement between the interested parties.
信息：ICS： CCS：发布：1985-1-1 实施：

MSZ 9650/23-1978 涂料检测流度温度的确定
简介：
信息：ICS： CCS：发布：1978 实施：

ASTM G62-14 管道涂料假期检测的标准测试方法
简介：
信息：ICS：23.040.99 CCS：发布：2014-07-01 实施：

NACE TM0186-1985 250至760 um(10至30 Mils)干膜厚度的内部管涂料的漏点检测.项目编号21218
简介：
信息：ICS： CCS：发布：1985 实施：

MSZ 21189-1976 MSZ 21 189－76 水泥涂料的检测方法
简介：
信息：ICS： CCS：发布：1976-01-01 实施：

ASTM G62-07(2013) 管道涂料假期检测的标准测试方法
简介：
信息：ICS：23.040.99 CCS：发布：2013-06-01 实施：

NACE TM0384-1984 低于250mu(10 mils)干膜厚度的内部管涂料的漏点检测.项目编号21216
简介：
信息：ICS： CCS：发布：1984-01-01 实施：

MSZ 9650/22-1974 检测涂料覆盖能力和比率的试验
简介：
信息：ICS： CCS：发布：1974 实施：

KS M 5986-2008(2018) 涂料中铅的检测与干涂料膜
简介：
信息：ICS：87.040 CCS：发布：2008-09-30 实施：

MSZ 9640/42-1984 涂料和涂料系统检测．水中防腐蚀能力
简介：
信息：ICS： CCS：发布：1984 实施：

MSZ 9640/10-1971 涂料和涂料系统检测．水渗透能力检测
简介：
信息：ICS： CCS：发布：1971 实施：

KS M 5986-2008 涂料和干燥涂膜中铅检测方法
简介：1.1 이 시험방법은 도료의 고형물 중에 납이 0.5 % 이상 함유되어 있을 경우, 이를
信息：ICS：87.040 CCS：G57 发布：2008-09-30 实施：2008-09-30

MSZ 9640/20-1983 涂料和涂料系统检测老化
简介：
信息：ICS： CCS：发布：1983 实施：

MSZ 9640/11-1971 涂料和涂料系统检测．含水性检测
简介：
信息：ICS： CCS：发布：1971 实施：

MSZ 9640/40-1983 涂料和涂料系统检测，防腐蚀能力检测
简介：
信息：ICS： CCS：发布：1983 实施：

VSM 16109-1970 油漆及染料工业．涂料检测．变化曲线
简介：
信息：ICS： CCS：发布：1970-5-1 实施：

ASTM G62-07 管道涂料假期检测的标准测试方法
简介：
信息：ICS：23.040.99 CCS：发布：2007-07-01 实施：

ISO 6451:1982 塑料涂层织物——聚氯乙烯涂料——快速检测融合的方法
简介：
信息：ICS：59.080.40 CCS：发布：1982-09-01 实施：

MSZ 7742/2-1970 非金属无机涂料．正极检测
简介：
信息：ICS： CCS：发布：1970 实施：

SANS 5771-2005 未上涂料和相关产品的钢基的备制．经喷砂清洁的钢板表面清洁度的评估试验．轧屑残留的检测
简介：Specifies a method for the determination of the cleanliness of blast-cleaned steel surfaces before painting or application of related products, by assessing the presence of residual millscale.
信息：ICS：25.220.10;77.140.01;87.020 CCS：A29 发布：2005-01-28 实施：

MSZ 9640/24-1982 涂料涂层和涂层系统检测．发光性检测
简介：
信息：ICS： CCS：发布：1982 实施：

ABNT P-MB-506-1969 混凝土．筛网200号 fela涂料检测方法
简介：1.1-0 pi'esente método estabelece o processo para determinar a finura de cimento com c emprego da peneira n°. 200 (74 ).
信息：ICS： CCS：发布：1969-1-1 实施：

ASTM D4834-2003 用直接吸气原子吸收光谱法检测涂料中铅的标准试验方法
简介：Current U.S. regulations restrict the amount of lead that may be present in consumer paint products to less than 0.06 % based on the total solids. This test method provides a rapid means for screening paints to determine compliance with those regulations. The test method may be adjusted to meet regulations with a different limit on lead content.1.1 This test method is intended as a screening test to determine if the solids in a paint contain more than 0.06 % lead. The test described can differentiate between 0.05 and 0.06 %. Paints giving a result greater than 0.05 % should be analyzed quantitatively for lead using Test Method D 3335. This test method provides a more definitive and reliable screening test than Test Method D 3618.1.2 There is no reason to believe that higher levels of lead could not be determined by this test method provided that appropriate dilutions and adjustments in specimen size and reagent quantities are made.1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 (Paints and varnishes) CCS：G50 发布：2003 实施：

MSZ 9650/27-1982 涂料检测．潮湿的涂料层厚度测量
简介：
信息：ICS： CCS：发布：1982 实施：

PN BN 6110-22-1967 涂料产品．干燥能力检测
简介：Przedmiotem normy jest badanie przydatno?ci wyrobu lakierowego do dosuszania.
信息：ICS： CCS：发布：1967 实施：

ASTM G62-87(1998) 管道涂料假期检测的标准测试方法
简介：
信息：ICS： CCS：发布：1998-07-10 实施：

MSZ 9650/25-1982 涂料检测．筛子残留物检测
简介：
信息：ICS： CCS：发布：1982 实施：

PN BN 6110-17-1966 船只涂料．涂层防滑能力检测
简介：Przedmiotem normy jest metoda oznaczania w?asno?ci przeciw?lizgowych, pow?ok z farb okr?towych.
信息：ICS： CCS：发布：1966 实施：

ASTM D6165-1997(2003) 涂料,油墨和相关材料的气味识别,检测,比较的标准指南
简介：1.1 This guide is intended to provide direction in order to assist the producers and users of paints, inks, and related coatings, and others who may also be exposed, to detect, compare and identify the odors that may originate from these materials.1.2 This guide is intended to provide references for establishing guidelines to assist in identifying and verifying the sources of odors and other related issues. Further information may be found in DS-48A (1).1.3 This guide is intended to assist in establishing guidelines as follows: (1)Comparing products for their odor characteristics, (2)Determining the perception threshold of odors, (3)Isolating and identifying the chemical nature of the odor, and (4)Confirming the results.1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheet.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 (Paints and varnishes); 87.080 (Inks. Print CCS：G51 发布：1997 实施：

MSZ 9650/26-1982 涂料检测．修正过的Abel．Pensky设备中的燃点检测
简介：
信息：ICS： CCS：发布：1982 实施：

PN BN 6110-15-1966 涂料产品．检测涂层对温度变化耐受力的测试
简介：Przedmiotem normy jest metoda badania odporno?ci pow?ok lakierowych na dzia?anie zmiennych temperatur.
信息：ICS： CCS：发布：1966 实施：

ASTM D6165-1997(2008) 涂料、油墨和相关材料的气味识别、检测、比较的标准指南
简介：This guide is intended to direct the user to the appropriate existing standards and literature in order for the user to become knowledgeable of the operations that need to be done to effectively compare, detect and identify the odors of paints, inks, and related materials. This guide directs the user to specific standards and literature sources that allow the user to accomplish the primary steps to complete the following task: (1) Comparing products for their odor characteristics, (2) Determining the perception threshold of odors, (3) Isolating and identifying the chemical nature of the odor, and (4) Confirming the results.1.1 This guide is intended to provide direction in order to assist the producers and users of paints, inks, and related coatings, and others who may also be exposed, to detect, compare and identify the odors that may originate from these materials. 1.2 This guide is intended to provide references for establishing guidelines to assist in identifying and verifying the sources of odors and other related issues. Further information may be found in DS-48A (1). 1.3 This guide is intended to assist in establishing guidelines as follows: (1) Comparing products for their odor characteristics, (2) Determining the perception threshold of odors, (3) Isolating and identifying the chemical nature of the odor, and (4) Confirming the results. 1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheet. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.080 (Inks. Printing inks) CCS：G51 发布：1997 实施：

NF T30-200-1981 涂料.儿童用品涂料.溶于盐酸金属含量的检测
简介：
信息：ICS：87.040;97.200.50 CCS：G51 发布：1981-06-01 实施：1981-06-11

PN BN 6110-19-1966 聚亚安脂涂料产品．实验室检测系统学
简介：Przedmiotem normy jest systematyka badań laboratoryjnych wyrobów lakierowych poliuretanowych dwusk?adnikowych^z wyj?tkiem grobów elektro-izolaoyjnych, obejmuj?ca podstawowe za?o?enia do norm przedmiotowych.
信息：ICS： CCS：发布：1966 实施：

ASTM D6165-1997(2012) 涂料、油墨和相关材料的气味识别、检测、比较的标准指南
简介：4. Significance and UseTop Bottom 4.1 This guide is intended to direct the user to the appropriate existing standards and literature in order for the user to become knowledgeable of the operations that need to be done to effectively compare, detect and identify the odors of paints, inks, and related materials. 4.2 This guide directs the user to specific standards and literature sources that allow the user to accomplish the primary steps to complete the following task:(1) Comparing products for their odor characteristics,(2) Determining the perception threshold of odors,(3) Isolating and identifying the chemical nature of the odor, and(4) Confirming the results. 1.1 This guide is intended to provide direction in order to assist the producers and users of paints, inks, and related coatings, and others who may also be exposed, to detect, compare and identify the odors that may originate from these materials. 1.2 This guide is intended to provide references for establishing guidelines to assist in identifying and verifying the sources of odors and other related issues. Further information may be found in DS-48A (1).2 1.3 This guide is intended to assist in establishing guidelines as follows:(1) Comparing products for their odor characteristics,(2) Determining the perception threshold of odors,(3) Isolating and identifying the chemical nature of the odor, and(4) Confirming the results. 1.4 For hazard information and guidance, see the supplierx0027;s Material Safety Data Sheet. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 (Paints and varnishes); 87.080 (Inks. Print CCS：G51 发布：1997 实施：

MSZ 9640/38-1981 涂料涂层和涂层系统检测．涂层厚度检测
简介：
信息：ICS： CCS：发布：1981 实施：

VSM 18722.1-1965 油漆及染料工业．涂料检测．特殊重量 1）
简介：
信息：ICS： CCS：发布：1965-3-1 实施：

ASTM D6165-1997 涂料,油墨和相关材料的气味识别,检测,比较的标准指南
简介：1.1 This guide is intended to provide direction in order to assist the producers and users of paints, inks, and related coatings, and others who may also be exposed, to detect, compare and identify the odors that may originate from these materials.
信息：ICS：87.040 (Paints and varnishes); 87.080 (Inks. Print CCS：G51 发布：1997 实施：

MSZ 9640/39-1981 涂料和涂料系统检测．清洁能力检测
简介：
信息：ICS： CCS：发布：1981 实施：

MSZ 9640/2.lap-1965 涂料和涂料系统检测．硬度检测用铅笔检查
简介：
信息：ICS： CCS：发布：1965 实施：

SN 018 014-1988 油漆及染料工业．涂料检测．耐热涂料的检测方法
简介：Die vorliegende Norm legt den Aufbau und den Umfang technischer Lieferbedingungen in SN-Normen fest. Sie ist, sofern anwendbar, in den Text von produktbezo-genen SN-Normen einzubeziehen.
信息：ICS： CCS：发布：1987-11-18 实施：

MSZ 9640/9-1980 涂料涂层和涂层系统检测．击打稳定性检测
简介：
信息：ICS： CCS：发布：1980 实施：

MSZ 9650/19.lap-1965 涂料检测．干燥时间和干燥过程检测
简介：
信息：ICS： CCS：发布：1965 实施：

MSZ 9640/26-1987 涂料和涂料系统检测用Buchholz方法检测硬度
简介：
信息：ICS： CCS：发布：1987 实施：

MSZ 9640/12-1980 涂料涂层和涂层系统检测．吸水性检测
简介：
信息：ICS： CCS：发布：1980 实施：

MSZ 9640/3.lap-1965 涂料和涂料系统检测，划刻的硬度用克莱门特法检测
简介：
信息：ICS： CCS：发布：1965 实施：