怎么多少个国家的认证检测标准怎么多少个国家的认证-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

怎么多少个国家的认证相关标准参考信息

T/AOPA 0003-2020 原国家航空器驾驶员飞行经历认证服务规范
简介：描述了原国家航空器驾驶员飞行经历认证服务相关术语、定义，认证原则、程序和信用管理等基本内容。
信息：ICS：03.220.50 CCS：G562 发布：2020-08-05 实施：2020-08-10

GOST R 8.637-2007 国家测量统一性保证体系.管线非破坏性测试设备的测量维护认证参照材料.一般要求
简介：
信息：ICS：17.020 CCS：发布：2007 实施：2008-10-01

GEIA EIA-599-A-1998 国家电子工艺认证标准
简介：This standard applies to the interconnection of data terminal equipment and numerical control equipmentat the tape reader interface. The data terminal would typically be connected to a remote datasource/sink such as a computer.
信息：ICS：49.060 CCS：L94 发布：1998-06-01 实施：

CFR 7-785.4-2014 农业. 第785部分:注册国家调解程序. 第785.4节:授予认证的国家调解程序.
简介：(a) Eligibility. To be eligible to receive a grant, a State mediation program must:
信息：ICS： CCS：B00 发布：2014-12-19 实施：2014-12-19

SAE AS 7108/1A-1998 针对涂漆和干膜涂层的国家航空航天和国防承包商认证计划要求
简介：This Aerospace Standard (AS) is to be used to supplement AS7108. In addition to the requirements contained in AS7108, the requirements contained herein shall apply to suppliers seeking NADCAP accreditation for painting and dry film coatings.
信息：ICS：49.040 CCS：V00 发布：1998-03-01 实施：

CFR 9-77.9-2014 动物与动物产品. 第77部分:结核病. 第B子部分:牛和野牛. 第77.9节:修改认证先进国家或区域.
简介：(a) The following are modified accredited advanced States: California.
信息：ICS： CCS：B41 发布：2014-07-29 实施：2014-07-29

SAE AS 7112/6-2004 国家航空航天和国防承包商认证计划钛3AI-2.5V合金,无缝液压油管制造要求
简介：This Aerospace Standard (AS) is to be used as a supplement to SAE AS 7112. In addition to the requirements specified in SAE AS 7112, the requirements specified herein shall apply to suppliers seeking Nadcap Fluid System accreditation for manufacturing titanium 3Al-2.5V alloy, seamless hydraulic tubing. The corresponding PRI Audit Criteria (AC) is to be applied to ensure the tubing is manufactured to the applicable specification(s) and standard(s).
信息：ICS：49.080 CCS：V21 发布：2004-03-01 实施：

ANSI/EIA 599-A-1998 国家电子工艺认证标准
简介：Covers requirements for taping surface mount components. Complementary standards for specialized taping requirements are included in the addendum.
信息：ICS：31.020;03.120.20 CCS：L00 发布：1998 实施：

CFR 9-77.7-2014 动物与动物产品. 第77部分:结核病. 第B子部分:牛和野牛. 第77.7节:无认证的国家或地区.
简介：a) The following are accredited-free States: Alabama, Alaska, Arizona, Arkansas, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon,
信息：ICS： CCS：B41 发布：2014-07-29 实施：2014-07-29

GOST R 8.609-2004 国家测量统一性保证体系.国家核材料审计与控制系统的认证参照材料.基本原则
简介：
信息：ICS：17.020 CCS：发布：2004 实施：2005-01-01

SAE AS 7114-1997 国家航空航天和国防承包商认证计划无损测试要求,代替AS 7100/1A
简介：This Aerospace Standard (AS) establishes the requirements for suppliers of nondestructive testing (NDT) to be accredited by the National Aerospace and Defense Contractors Accrdditation Program (NADCAP) in accordance with the current revision of SAE AS7003. Using the audit checklist and the applicable supplementary checklists will ensure that accredited NDT suppliers meet the requirements of this standard and all applicable supplementary standards. When customer requirements differ from those specified herein, the customer requirements shall take precedence.
信息：ICS：49.020 CCS：V00 发布：1997-07-01 实施：

CFR 12-34.43-2014 银行和银行业务. 第34部分:房地产贷款和评估. 第C子部分:商业评估. 第34.43节:评估要求,国家认证或注册评估师要求.
简介：(a) Appraisals required. An appraisal performed by a State certified or licensed appraiser is required for all real estate-related financial transactions except those in which:
信息：ICS： CCS：A11 发布：2014-05-16 实施：2014-05-16

SAE AS 7110/5C-2003 针对熔焊的国家航空航天和国防承包商认证计划要求
简介：This Aerospace Standard (AS) is to be used to supplement AS7110. In addition to therequirements contained in AS7110, the requirements contained herein shall apply tosuppliers seeking Nadcap accreditation for fusion welding.
信息：ICS： CCS：V00 发布：2003-12 实施：

SAE AS 7114/2-1997 针对无损检测磁粉调查的国家航空航天和国防承包商认证计划要求,代替AS 7100/1A
简介：This Aerospace Standard is to be used as a supplement to SAE AS7114. In addition to the requirements contained in AS7114, the requirements contained herein shall apply to suppliers seeking NADCAP accreditation for Magnetic Particle Inspection. When customer requirements differ from those specified herein, the customer requirements shall take precedence.
信息：ICS：19.100;49.020 CCS：V00 发布：1997-07-01 实施：

CFR 40-141.852-2014 环境保护. 第141部分:国家主要饮用水规定. 第141.852节:分析方法和实验室认证.
简介：(a) Analytical methodology. (1) The standard sample volume required for analysis, regardless of analytical method used, is 100 ml.
信息：ICS： CCS：发布：2014-02-26 实施：2014-02-26

SAE AS 7110C-2003 针对焊接/钎焊的国家航空航天和国防承包商认证计划要求
简介：This Aerospace Standard (AS) establishes the requirements for suppliers ofWelding/Brazing Services to be accredited by Nadcap. These requirements may besupplemented by additional requirements specified by Nadcap Welding Task Group. Usingthe audit checklist (AC7110) will ensure that accredited Welding/Brazing suppliers meet allof the requirements in this standard and all applicable supplementary standards.
信息：ICS： CCS：V00 发布：2003-12 实施：

SAE AS 7108/2-1997 针对蚀刻制程(宏观结构,硝酸乙醇溶液,韧度,蓝蚀刻阳极)的国家航空航天和国防承包商认证计划要求
简介：This Aerospace Standard (AS) establishes the requirements for suppliers for Etching Processes to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). These requirements may be supplemented by additional requirements specified by NADCAP Chemical Processing suppliers meet all of the requirements in this standard and all applicable supplementary standards.
信息：ICS： CCS：V00 发布：1997-07 实施：

GOST R 51725.4-2014 "联邦国家需要的产品目录. 供应项目的标准描述格式. 开发, 认证, 维护和应用规则"
简介：
信息：ICS：35.240.01 CCS：发布：2014 实施：2015-07-01

SAE AS 7110/9C-2003 针对敲击螺柱焊接的国家航空航天和国防承包商认证计划要求
简介：This Aerospace Standard (AS) is to be used to supplement AS7110. In addition to therequirements contained in AS7110, the requirements contained herein shall apply tosuppliers seeking Nadcap accreditation for percussion stud welding.
信息：ICS： CCS：V00 发布：2003-12 实施：

SAE AS 7113-1997 针对紧固件制造的国家航空航天和国防承包商认证计划要求
简介：This Aerospace Standard (AS) establishes the requirments for manufacturers of Fasteners to be accredited by the National Aeroapce and Defense Contractors Accreditation Program (NADCAP). NADCAP accreditation is granted in accordance with SAE AS7003 after demonstrating compliance with the requirements herein. These requirements may be supplemented by additional requirements specified by NADCAP Fastener Manufacturing Task Group. Using the corrsponding Audit Criteria checklists (PRI ACs) will ensure that accredited Fastener Manufacturing suppliers meet all of the requirements in this standard and all applicable supplementary standards.
信息：ICS：49.030.01 CCS：V20 发布：1997-03-01 实施：

CFR 7-205.605-2013 农业. 第205部分:美国国家有机认证计划. 第205.605节:非农(食)允许物质作为原料或加工产品贴上"有机"或"用有机(指定的原料或食品集团)."
简介：The following nonagricultural substances may be used as ingredients in or on processed products labeled as “organic” or “made with organic (specified ingredients or food group(s))” only in accordance with any restrictions specified in this section.
信息：ICS： CCS：B17 发布：2013-10-03 实施：2013-10-03

SAE AS 7110/7C-2003 针对旋转摩擦/惯性焊接的国家航空航天和国防承包商认证计划要求
简介：This Aerospace Standard (AS) is to be used to supplement AS7110, and/or any otherNadcap recognized quality system. In addition to the requirements contained in AS7110,the requirements contained herein shall apply to suppliers seeking Nadcap accreditation forRotational Friction/Inertia Welding.
信息：ICS： CCS：V00 发布：2003-12 实施：

GOST R 51000.9-1997 俄罗斯联邦国家标准化体系.俄罗斯联邦的评定制度.认证机构进行人员认证的一般标准
简介：Настоящий стандарт устанавливает общие критерии, которым должен соответствовать орган по сертификации персонала в целях обеспечения его
信息：ICS：03.120.20 CCS：发布：1997 实施：1997-07-01

CFR 7-205.601-2013 农业. 第205部分:美国国家有机认证计划. 第205.601节:合成物质允许用于有机作物生产.
简介：In accordance with restrictions specified in this section, the following synthetic substances may be used in organic crop production: Provided, That, use of such substances do not contribute to contamination of crops, soil, or water. Substances allowed by this section, except disinfectants and sanitizers in paragraph (a) and those substances in paragraphs (c), (j), (k), and (l) of this section, may only be used when the provisions set forth in § 205.206(a) through (d) prove insufficient to prevent or control the target pest.
信息：ICS： CCS：B17 发布：2013-05-28 实施：2013-05-28

SAE AS 7110/3C-2003 针对电子束焊的国家航空航天和国防承包商认证计划要求
简介：This Aerospace Standard (AS) is to be used to supplement AS7110. In addition to therequirements contained in AS7110, the requirements contained herein shall apply tosuppliers seeking Nadcap accreditation for electron beam welding.
信息：ICS： CCS：V00 发布：2003-12 实施：

GOST R 8.566-1996 国家测量一致性保证体制.温度为-50+2500鳦时黑体模型的标准辐射源(参照源).测量认证及验证的标准规程
简介：Настоящий стандарт распространяется на эталонные (образцовые) излучатели 1-го и 2-го разрядов в виде моделей абсолютно черного тела, предна
信息：ICS：17.200.10;17.200.20 CCS：发布：1996 实施：1997-07-01

CFR 7-205.606-2013 农业. 第205部分:美国国家有机认证计划. 第205.606节:非有机生产农产品允许作为原料或加工刺激摘要利用贴上"有机".
简介：Only the following nonorganically produced agricultural products may be used as ingredients in or on processed products labeled as ‘‘organic,’’ only in accordance with any restrictions specified in this section, and only when the product is not commercially available in organic form.
信息：ICS： CCS：B17 发布：2013-05-28 实施：2013-05-28

SAE AS 7110/8C-2003 针对扩散焊的国家航空航天和国防承包商认证计划要求
简介：This Aerospace Standard (AS) is to be used to supplement AS7110, and/or any Nadcaprecognized quality system. In addition to the requirements contained in AS7110, therequirements contained herein shall apply to suppliers seeking Nadcap accreditation fordiffusion welding.
信息：ICS： CCS：V00 发布：2003-12 实施：

SAE AS 7102A-1995 针对热处理的国家航空航天和国防承包商认证计划一般要求
简介：This Aerospace Standard (AS) establishes the requirements for heat treating accreditation by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). These requirements may be supplemented by additional requirements specified by the NADCAP heat treating task group. Using the audit checklist (AC7102) will ensure that accredited heat treat suppliers meet all of the requirements in this standard and all applicable supplementary standards. All instructions, procedures, tests and inspection records, etc., referenced herein shall be in writing; distribution of instructions and procedures (including all revisions) shall be recorded and controlled. The NADCAP heat treating task group recognizes SAE AS7004, SAE AS7106, and SAE AS7107 as equivalent to the systems questions of this document as noted in the NADCAP auditor handbook.
信息：ICS：49.020 CCS：V00 发布：1995-01-01 实施：

CFR 12-722.3-2013 银行和银行业务. 第722部分:估量. 第722.3节:需要的评估;需要国家认证或授权鉴定人的交易.
简介：(a) Appraisals required. An appraisal performed by a State certified or licensed appraiser is required for all real estate-related financial transactions except those in which:
信息：ICS： CCS：发布：2013-02-13 实施：2013-02-13

SAE AS 7110/1C-2003 针对钎焊(焊灯和感应)的国家航空航天和国防承包商认证计划要求
简介：This Aerospace Standard (AS) is to be used to supplement AS7110. In addition to therequirements contained in AS7110, the requirements contained herein shall apply tosuppliers seeking Nadcap accreditation for brazing (torch and/or induction).
信息：ICS： CCS：V00 发布：2003-12 实施：

SAE AS 7110/11-1995 针对气体融合点焊的国家航空航天和国防承包商认证计划要求
简介：This Aerospace Standard (AS) is to be used to supplement AS7110. In addition to the requirementscontained in AS7110, the requirements contained herein shall apply to suppliers seeking NADCAPaccreditation for gas tungsten arc fusion spot welding.
信息：ICS： CCS：V00 发布：1995 实施：

CFR 12-722.3-2014 银行和银行业务. 第722部分:评估. 第722.3节:评估要求;交易需要国家认证或注册评估师.
简介：(a)Appraisals required. An appraisal performed by a State certified or licensed appraiser is required for all real estate-related financial transactions except those in which:
信息：ICS： CCS：A11 发布：2013-02-13 实施：2014

SAE AS 7110/6C-2003 针对激光焊的国家航空航天和国防承包商认证计划要求
简介：This Aerospace Standard (AS) is to be used to supplement AS7110. In addition to therequirements contained in AS7110, the requirements contained herein shall apply tosuppliers seeking Nadcap accreditation for laser welding.
信息：ICS： CCS：V00 发布：2003-12 实施：

SAE AS 7110/10-1995 针对铸件铸造过程中焊接的国家航空航天和国防承包商认证计划要求
简介：This Aerospace Standard (AS) is to be used to supplement AS71 1 O. In addition to therequirements contained in AS71 1 O, the requirements contained herein shall apply tosuppliers seeking NADCAP accreditation for foundry in-process welding of castings.
信息：ICS： CCS：V00 发布：1995 实施：

CFR 9-77.10-2013 动物与动物产品. 第77部分:肺结核. 第77.10节:国家和地区的跨境流动的修改的认证
简介：Cattle or bison that originate in a modified accredited advanced State or zone, and that are not known to be infected with or exposed to tuberculosis, may be moved interstate only in accordance with 9 CFR part 86 and, if moved anywhere other than directly to slaughter at a recognized slaughtering establishment, under one of the following additional conditions.
信息：ICS： CCS：B40 发布：2013-01-09 实施：2013-01-09

SAE AS 7110/4C-2003 针对电阻焊接(点焊,缝焊,凸焊)的国家航空航天和国防承包商认证计划要求
简介：This Aerospace Standard (AS) is to be used to supplement AS7110. In addition to therequirements contained in AS7110, the requirements contained herein shall apply tosuppliers seeking Nadcap accreditation for resistance welding (spot, seam, and projection).
信息：ICS： CCS：V00 发布：2003-12 实施：

GOST R 40.101-1995 国家自动认证系统登记证和其合格标志
简介：Настоящий стандарт устанавливает критерии и порядок проведения государственной регистрации систем добровольной сертификации и их знако
信息：ICS：03.120.20 CCS：发布：1995 实施：1996-01-01

CFR 9-77.27-2013 动物与动物产品. 第77部分:肺结核. 第77.27节:国家和地区的跨境流动的修改的认证
简介：Except for captive cervids from a qualified herd or monitored herd, as provided in §§ 77.36 and 77.37, respectively, captive cervids that originate in a modified accredited State or zone, and that are not known to be infected with or exposed to tuberculosis, may be moved interstate only in accordance with 9 CFR part 86 and, if moved anywhere other than directly to slaughter at a recognized slaughtering establishment, under one of the following additional conditions.
信息：ICS： CCS：B40 发布：2013-01-09 实施：2013-01-09

SAE AS 7110/2C-2003 针对闪光焊的国家航空航天和国防承包商认证计划要求
简介：This Aerospace Standard (AS) is to be used to supplement AS7110. In addition to therequirements contained in AS7110, the requirements contained herein shall apply tosuppliers seeking Nadcap accreditation for Flash Welding.
信息：ICS： CCS：V00 发布：2003-12 实施：

SAE AS 7200/1A-1994 国家航空航天和国防承包商认证计划(NADCAP)对密封剂生产商认证项目的审计检查程序和检查表
简介：This standard includes the procedures and forms to be used by a third party for auditing and on-going inspection for assessing the capability of sealant manufacturers to furnish products to indicated standards.
信息：ICS：49.020 CCS：V00;V13 发布：1994-01-01 实施：

CFR 9-77.29-2013 动物与动物产品. 第77部分:肺结核. 第77.29节:国家和地区跨境流动的认证的准备
简介：Except for captive cervids from a qualified herd or monitored herd, as provided in §§ 77.36 and 77.37, respectively, captive cervids that originate in an accreditation preparatory State or zone, and that are not known to be infected with or exposed to tuberculosis, may be moved interstate only in accordance with 9 CFR part 86 and, if moved anywhere other than directly to slaughter at a recognized slaughtering establishment, under one of the following additional conditions.
信息：ICS： CCS：B40 发布：2013-01-09 实施：2013-01-09

SAE AS 7112/3-2003 针对联轴器和成形钣金部件的国家航空航天和国防承包商认证计划要求
简介：This Aerospace Standard (AS) is to be used as a supplement to SAE AS 7112. In addition to the requirements contained in SAE AS 7112, the requirements contained herein shall apply to suppliers seeking Nadcap Fluid Systems Components Accreditation for the manufacturer of Couplings and formed Sheet Metal Components.
信息：ICS：49.080 CCS：V00 发布：2003 实施：

SAE AS 7103-1993 针对通过分销商认可的国家航空航天和国防承包商认证计划(NADCAP)要求
简介：1.1 This aerospace standard outlines the minimum requirements for the quality assurance program of adistributor of new aircraft or aerospace parts and material. It is designed to aid in the surveillance andaccreditation of a distributor who procures new parts and materials and resells these products tocustomers or other distributors in the aviation or aerospace industry, i.e., a PASS THROUGHdistributor. This standard may be used to determine the adequacy and implementation of thedistributor’s quality assurance program.1.2 For the purposes of this standard, a pass through distributor shall.1.3 This standard recognizes that customer practices and the nature of the commodities make itnecessary to establish several levels of quality assurance disciplines for pass through distributors.These levels are defined.1.4 Compliance with this standard does not necessarily indicate that a distributor will be granted NADCAPaccreditation.1.5 Distributors are subject to a quality program audit by the accrediting agency at any time during regularworking hours. Normally, the auditor will notify the distributor and arrange the audit so as to causeminimal interference with the distributor’s operations, but, should circumstances dictate, the auditormay arrive unannounced.1.6 An accreditation audit for distribution of new aircraft parts is not interchangeable and cannot besubstituted for an audit applicable to distributors performing remanufacturing, alteration and/or repairservices or those selling remanufactured, altered, or repaired products.1.7 Conforming parts and materials are necessary to support compliance with applicable Federal AviationRegulations (FARs) which may include FAR 121.215, 121.303, 121.312, 121.363 and/or 135.143. FAAAdvisory Circular (AC) 20-62 provides relevant information on aeronautical replacement parts.Unapproved parts should be reported in accordance with AC 21-29.1.8 In those instances where this standard is used for distributors servicing the commercial/civil aviationsector, the requirements referencing "certified" or "authorized inspection personnel" is mandatory.1.9 Any verified evidence of product or document alteration will result in loss of PRI/NADCAPaccreditation. Such action will be pursued through PRI’s Due Process procedures. Product alterationis any physical, chemical, or dimensional change from the original "as manufactured" configuration.Document alteration is any deletion, addition, or alteration to documents provided by the manufacturerattesting to physical, chemical, dimensional, functional, or other conformity or traceability aspect of theproducts.1.10 This standard is compatible with the requirements of ISO 9003 (1987) "Quality systems - Model forquality assurance in final inspection and test" or the equivalent ANSI/ASQC Q93.1.11 PRI AC7103 is the checklist to be used with this standard.
信息：ICS： CCS：V00 发布：1993-06-24 实施：

CFR 9-77.12-2013 动物与动物产品. 第77部分:肺结核. 第77.12节:国家和地区的跨境流动的修改的认证
简介：Cattle or bison that originate in a modified accredited State or zone, and that are not known to be infected with or exposed to tuberculosis, may be moved interstate only in accordance with 9 CFR part 86 and, if moved anywhere other than directly to slaughter at a recognized slaughtering establishment, under one of the following additional conditions.
信息：ICS： CCS：B40 发布：2013-01-09 实施：2013-01-09

SAE AS 7101B-2002 美国国家航空航天和国防承包商认证计划(NADCAP)一般要求,主要针对材料测试实验室认可计划
简介：1.1 This standard establishes the minimum requirements for materials testing laboratories (MTL)accredited by NADCAP. The following test methods and processes for metallic material systemsare covered in this standard.a. Chemical Testingb. Mechanical Testingc. Metallography and Microhardnessd. Hardnesse. Corrosionf. Mechanical Testing Specimen Preparationg. Differential Thermal Analysish. Heat Treatingi. X-Ray Diffractionj. Fastener Testing
信息：ICS： CCS：V10 发布：2002-10 实施：

SAE AS 7202-1991 国家航空航天和国防承包商认证计划对增值配电器的认证要求
简介：This aerospace standard outlines minimum quality assurance requirements common to commodities which must be met by a value added distributor for third party accreditation. Requirements peculiar to a specific commodity are outlined in the document applicable to that commodity and the accredited distributor shall be listed in the appropriate qualified manufacturers list (QML). For purposes of this standard, a value added distributor shall a. not affect the specification conformance of the product as imparted by the manufacturer; b. maintain on file and, if required, provide the purchaser with unchanged copies of the documentation created and provided by the original manufacturer and that establishes traceability for specification conformance; c. provide certification to ensure that product quality has been maintained; and d. be allowed to cut, repackage, or perform other value added services to the original shipment without adversely affecting specification conformance, environmental protection, age control, traceability, or manufacturers warranty. Manufacturers accredited under this document are automatically accredited to AS7201
信息：ICS：03.120.10;49.020 CCS：V00;V40 发布：1991-01-01 实施：

CFR 9-77.14-2013 动物与动物产品. 第77部分:肺结核. 第77.14节:国家和地区跨境流动的认证的准备
简介：Cattle or bison that originate in an accreditation preparatory State or zone, and that are not known to be infected with or exposed to tuberculosis, may be moved interstate only in accordance with 9 CFR part 86 and, if moved anywhere other than directly to slaughter at a recognized slaughtering establishment, under one of the following additional conditions.
信息：ICS： CCS：B40 发布：2013-01-09 实施：2013-01-09

SAE AS 7116/3-2002 国家航空航天和国防承包商认证计划电火花加工(EDM)要求
简介：This Aerospace Standard (AS) is to be used to supplement AS7116. In addition to the requirements contained in AS7116, the requirements contained herein shall apply to suppliers seeking NADCAP accreditation for electrical discharge machining (EDM). The EDM requirements contained herein address the wire, sinker and fast hole EDM process methods.
信息：ICS：49.020 CCS：V00 发布：2002-02-01 实施：

SAE AS 7001-1990 国家航空航天和国防承包商认证计划(NADCAP)项目描述
简介：1.1 This standard describes the National Aerospace and Defense Contractors AccreditationProgram (NADCAP) to accredit the capability of suppliers furnishing processes, products, andservices for the aerospace and defense industries as provided for in specific programs.
信息：ICS：49.020 CCS：V00 发布：1990-01-01 实施：

CFR 9-77.25-2013 动物与动物产品. 第77部分:肺结核. 第77.25节:国家和地区的跨境流动的修改的认证
简介：Captive cervids that originate in a modified accredited advanced State or zone, and that are not known to be infected with or exposed to tuberculosis, may be moved interstate only in accordance with 9 CFR part 86 and, if moved anywhere other than directly to slaughter at a recognized slaughtering establishment, under one of the following additional conditions.
信息：ICS： CCS：B40 发布：2013-01-09 实施：2013-01-09

SAE AS 7116-2002 国家航空航天和国防承包商认证计划非常规加工要求
简介：This Aerospace Standard (AS) establishes the requirements for suppliers of Nonconventional Machining Services to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). NADCAP accreditation is granted in accordance with SAE AS7003 after demonstration of compliance with the requirements herein. The requirements may be supplemented by additional requirements specified by the NADCAP Nonconventional Machining and Surface Enhancement (NMSE) Task Group. Using the corresponding Audit Criteria (PRI AC7116) will ensure that accredited Nonconventional Machining suppliers meet all of the requirements in this standard and all applicable supplementary standards. The purpose of this audit program is to assess a suppliers ability to consistently provide a product or service that conforms to the technical specifications and customer requirements. The corresponding audit criteria are also structured to obtain information relevant to management practices and processes that directly or indirectly affect the product or service. This information will be used in the determination of accreditation status and may be used by the supplier to guide improvements in the product or service and the associated processes.
信息：ICS：49.020 CCS：V00 发布：2002-02-01 实施：

IRAM OFICIALIZADA 104 N.I.O.-1945 由国家材料标准化委员会认证的金属布氏硬度的试验方法
简介：B-l Esta norma se refiere al método, de determinación de la dureza Brinell de los materiales metálicos, a temperatura ambiente.
信息：ICS： CCS：发布：1945-1-1 实施：

GOST R 8.691-2010 国家测量统一性保证体系.认证参照材料.证书及标签内容
简介：
信息：ICS：17.020 CCS：发布：2010 实施：2012-01-01

SAE AS 7116/1-2002 国家航空航天和国防承包商认证计划电解加工(ECM)要求
简介：This Aerospace Standard (AS) is to be used to supplement AS7116. In addition to the requirements contained in AS7116, the requirements contained herein shall apply to suppliers seeking NADCAP accreditation for electrochemical machining (ECM).
信息：ICS：49.020 CCS：V00 发布：2002-02-01 实施：

简介： 信息：

GOST R 8.690-2009 确保测量一致性的国家体系.测试认证实验室间比较的水平测试使用
简介：
信息：ICS：17.020 CCS：发布：2009 实施：2011-01-01

SAE AS 7116/4-2002 国家航空航天和国防承包商认证计划激光束加工(LBM)要求
简介：This Aerospace Standard (AS) is to be used to supplement AS7116. In addition to the requirements contained in AS7116, the requirements contained herein shall apply to suppliers seeking NADCAP accreditation for laser beam machining (LBM). The LBM requirements contained herein address the drilling, cutting and marking LBM process methods.
信息：ICS：49.020 CCS：V00 发布：2002-02-01 实施：

简介： 信息：