橡胶试验标准油检测标准

橡胶试验标准油相关标准参考信息

ASTM D4573-22 橡胶化学品的标准试验方法油处理硫中油含量的测定
简介：
信息：ICS：83.040.20 CCS： 发布：2022-06-01 实施：

ASTM D3186-06 橡胶的标准试验方法&8212；炭黑或炭黑与油混合的丁苯橡胶（SBR）的评价
简介：
信息：ICS：83.060 CCS： 发布：2006-10-01 实施：

ASTM D2007-2002 粘土凝胶吸附色谱法测定橡胶增量和加工油及来自汽油的其他油的特性基团的标准试验方法
简介：1.1 This test method covers a procedure for classifying oil samples of initial boiling point of at least 260716;C (500176;F) into the hydrocarbon types of polar compounds, aromatics and saturates, and recovery of representative fractions of these types. This classification is used for specification purposes in rubber extender and processing oils. Note 18212;See Test Method D 2226.1.2 This test method is not directly applicable to oils of greater than 0.1 mass % pentane insolubles. Such oils can be analyzed after removal of these materials, but precision is degraded (See Appendix X1).1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precaution statements are given in 6.1, Section 7, A1.4.1, and A1.5.5.
信息：ICS：83.040.20 (Rubber compounding ingredients) CCS：E30 发布：2002 实施：

ASTM D3186-07(2021) 与炭黑或炭黑和油混合的丁苯橡胶（苯乙烯-丁二烯橡胶）橡胶评价的标准试验方法
简介：
信息：ICS：83.060 CCS： 发布：2021-11-01 实施：

ASTM D3484-06 橡胶的标准试验方法&8212；充油溶液BR（聚丁二烯橡胶）的评价
简介：
信息：ICS：83.060 CCS： 发布：2006-10-01 实施：

ASTM D2007-01 用粘土测定橡胶填充剂、加工油和其他石油衍生油中特征基团的标准试验方法&8212；凝胶吸收色谱法
简介：
信息：ICS：83.040.20 CCS： 发布：2001-11-10 实施：

ASTM D3185-06(2021) 包括油混合物的丁苯橡胶（苯乙烯-丁二烯橡胶）橡胶评价的标准试验方法
简介：
信息：ICS：83.060 CCS： 发布：2021-11-01 实施：

ASTM D3185-06 丁苯橡胶（包括与油的混合物）的橡胶评定的标准试验方法
简介：
信息：ICS：83.060 CCS： 发布：2006-03-01 实施：

ASTM D2007-98 用粘土测定橡胶填充剂、加工油和其他石油衍生油中特征基团的标准试验方法&8212；凝胶吸收色谱法
简介：
信息：ICS：83.040.20 CCS： 发布：2001-11-10 实施：

ASTM D4573-03(2018) 橡胶化学品的标准试验方法&x2014；油处理硫磺中油含量的测定
简介：
信息：ICS：83.040.20 CCS： 发布：2018-11-01 实施：

ASTM D3186-2006 橡胶的标准试验方法.与炭黑或炭黑和油混合的SBR(丁苯橡胶)的评定
简介：1.1 These test methods cover the standard materials, test formula, mixing procedures, and test methods for the evaluation and production control of pigmented types of styrene-butadiene rubbers (SBR). This includes the pigmented SBR oil masterbatches.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.060 (Rubber) CCS：G34 发布：2006 实施：

ASTM D2007-01a 用粘土测定橡胶填充剂、加工油和其他石油衍生油中特征基团的标准试验方法&8212；凝胶吸收色谱法
简介：
信息：ICS：83.040.20 CCS： 发布：2001-11-10 实施：

ASTM D3568-03(2018) 橡胶的标准试验方法&x2014；EPDM（乙烯-丙烯-二烯三元共聚物）的评价 包括与油的混合物
简介：
信息：ICS：83.060 CCS： 发布：2018-06-01 实施：

ASTM D3185-2006(2010) 橡胶的标准试验方法 - 包括和油混合的丁苯橡胶(SBR)的评估
简介：These test methods are mainly intended for referee purposes but may be used for quality control of synthetic rubber production. They may also be used in research and development work and for comparison of different rubber samples in a standard formula. These test methods may also be used to obtain values for customer acceptance of rubber.1.1 These test methods cover the standard materials, test formulas, mixing procedures, and test methods for the evaluation of emulsion polybutadiene (EBR) and styrene-butadiene rubbers (SBR) including the emulsion polybutadiene oil masterbatch rubbers, SBR oil masterbatches, and partially crosslinked and high Mooney rubbers. 1.2 These test methods are also applicable to certain types of solution SBR and solution SBR oil masterbatches that are used in applications requiring vulcanization. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.060 CCS：G34 发布：2006 实施：

ASTM D2007-2001 粘土凝胶吸附色谱法测定橡胶增量剂和作业油及其他石油衍生油中特性基团的标准试验方法
简介：1.1 This test method covers a procedure for classifying oil samples of initial boiling point of at least 260716;C (500176;F) into the hydrocarbon types of polar compounds, aromatics and saturates, and recovery of representative fractions of these types. This classification is used for specification purposes in rubber extender and processing oils. Note 18212;See Test Method D 2226.1.2 This test method is not directly applicable to oils of greater than 0.1 mass % pentane insolubles. Such oils can be analyzed after removal of these materials, but precision is degraded (See Appendix X1).1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precaution statements are given in 6.1, Section 7, A1.4.1, and A1.5.5.
信息：ICS：83.040.20 (Rubber compounding ingredients) CCS：G31 发布：2001 实施：

ASTM D2007-11(2016) 通过粘土凝胶吸附色谱法在橡胶延伸剂和加工油及其他石油衍生油中的特征组的标准试验方法
简介：
信息：ICS：75.100 CCS： 发布：2016-10-01 实施：

ASTM D3185-2006 包括混合物和油的SBR（苯乙烯合金橡胶）的橡胶评估的标准试验方法
简介：These test methods are mainly intended for referee purposes but may be used for quality control of synthetic rubber production. They may also be used in research and development work and for comparison of different rubber samples in a standard formula. These test methods may also be used to obtain values for customer acceptance of rubber.1.1 These test methods cover the standard materials, test formulas, mixing procedures, and test methods for the evaluation of emulsion polybutadiene (EBR) and styrene-butadiene rubbers (SBR) including the emulsion polybutadiene oil masterbatch rubbers, SBR oil masterbatches, and partially crosslinked and high Mooney rubbers.1.2 These test methods are also applicable to certain types of solution SBR and solution SBR oil masterbatches that are used in applications requiring vulcanization.1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.060 (Rubber) CCS：G34 发布：2006 实施：

ASTM D2007-2001a 粘土凝胶吸附色谱法测定橡胶增量剂和作业油及其他石油衍生油中特性基团的标准试验方法
简介：1.1 This test method covers a procedure for classifying oil samples of initial boiling point of at least 260716;C (500176;F) into the hydrocarbon types of polar compounds, aromatics and saturates, and recovery of representative fractions of these types. This classification is used for specification purposes in rubber extender and processing oils. Note 18212;See Test Method D 2226.1.2 This test method is not directly applicable to oils of greater than 0.1 mass % pentane insolubles. Such oils can be analyzed after removal of these materials, but precision is degraded (See Appendix X1).1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precaution statements are given in 6.1, Section 7, A1.4.1, and A1.5.5.
信息：ICS：83.040.20 (Rubber compounding ingredients) CCS：G31 发布：2001 实施：

ASTM D3186-07(2016) 橡胶的标准试验方法&x2014；炭黑或炭黑与油混合的丁苯橡胶（SBR）的评价
简介：
信息：ICS：83.060 CCS： 发布：2016-06-01 实施：

ASTM D3185-05 丁苯橡胶（包括与油的混合物）的橡胶评定的标准试验方法
简介：
信息：ICS：83.060 CCS： 发布：2005-12-01 实施：

ASTM D3185-99 丁苯橡胶（包括与油的混合物）的橡胶评定的标准试验方法
简介：
信息：ICS：83.060 CCS： 发布：1999-05-10 实施：

ASTM D3484-06(2016) 橡胶的标准试验方法&x2014；充油溶液BR（聚丁二烯橡胶）的评价
简介：
信息：ICS：83.060 CCS： 发布：2016-06-01 实施：

ASTM D3568-03 橡胶的标准试验方法&8212；EPDM（乙烯-丙烯-二烯三元共聚物）的评价 包括与油的混合物
简介：
信息：ICS：83.060 CCS： 发布：2003-11-01 实施：

ASTM D3185-1999 橡胶的标准试验方法.包含有油混合物的丁苯橡胶(SBR)的标准试验方法
简介：1.1 These test methods cover the standard materials, test formulas, mixing procedures, and test methods for the evaluation of emulsion polybutadiene (EBR) and styrene-butadiene rubbers (SBR) including the emulsion polybutadiene oil masterbatch rubbers, SBR oil masterbatches, and partially crosslinked and high Mooney rubbers. 1.2 These test methods are also applicable to certain types of solution SBR and solution SBR oil masterbatches that are used in applications requiring vulcanization. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.060 (Rubber) CCS：G34 发布：1999 实施：

ASTM D3185-06(2016) 橡胶的标准试验方法&x2014；SBR（丁苯橡胶）的评价 包括与油的混合物
简介：
信息：ICS：83.060 CCS： 发布：2016-06-01 实施：

ASTM D4573-03 橡胶化学品的标准试验方法&8212；油处理硫磺中油含量的测定
简介：
信息：ICS：83.040.20 CCS： 发布：2003-06-10 实施：

ASTM D4573-98 橡胶化学品标准试验方法油处理硫磺中含油量的测定
简介：
信息：ICS：83.040.20 CCS： 发布：1998-11-10 实施：

ASTM D3186-07(2011) 橡胶的标准试验方法&mdash；炭黑或炭黑与油混合的丁苯橡胶（SBR）的评价
简介：
信息：ICS：83.060 CCS： 发布：2011-11-01 实施：

ASTM D2007-03 通过粘土凝胶吸附色谱法在橡胶延伸剂和加工油及其他石油衍生油中的特征组的标准试验方法
简介：
信息：ICS：83.040.20 CCS： 发布：2003-05-10 实施：

ASTM D4573-1998 橡胶加工用化学药品的标准试验方法.测定被油浸过的硫磺中的含油量
简介：1.1 This test method covers the determination of the amount of hydrocarbon oils added to oil-treated sulfurs. The test method is employed when the amount of oil added is 1% or more of the total sample. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.040.20 (Rubber compounding ingredients) CCS：G34 发布：1998 实施：

ASTM D2007-11 通过粘土凝胶吸附色谱法在橡胶延伸剂和加工油及其他石油衍生油中的特征组的标准试验方法
简介：
信息：ICS：83.040.20 CCS： 发布：2011-05-01 实施：

ASTM D2007-03e1 通过粘土凝胶吸附色谱法在橡胶延伸剂和加工油及其他石油衍生油中的特征组的标准试验方法
简介：
信息：ICS：83.040.20 CCS： 发布：2003-05-10 实施：

ASTM D2007-1998 粘土凝胶吸附色谱法测定橡胶增量剂和作业油及其他石油衍生油中特性基团的标准试验方法
简介：1.1 This test method covers a procedure for classifying oil samples of initial boiling point of at least 260716;C (500176;F) into the hydrocarbon types of polar compounds, aromatics and saturates, and recovery of representative fractions of these types. This classification is used for specification purposes in rubber extender and processing oils. Note 18212;See Test Method D 2226.1.2 This test method is not directly applicable to oils of greater than 0.1 mass % pentane insolubles. Such oils can be analyzed after removal of these materials, but precision is degraded (See Appendix X1).1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precaution statements are given in 6.1, Section 7, A1.4.1, and A1.5.5.
信息：ICS：83.040.20 (Rubber compounding ingredients) CCS：G31 发布：1998 实施：

ASTM D2007-2011 粘土凝胶吸附色谱法测定橡胶填充剂和加工油及其他石油衍生油的特性组的标准试验方法
简介：The composition of the oil included in rubber compounds has a large effect on the characteristics and uses of the compounds. The determination of the saturates, aromatics, and polar compounds is a key analysis of this composition. The determination of the saturates, aromatics, and polar compounds and further analysis of the fractions produced is often used as a research method to aid understanding of oil effects in rubber and other uses.1.1 This test method covers a procedure for classifying oil samples of initial boiling point of at least 260x00B0;C (500x00B0;F) into the hydrocarbon types of polar compounds, aromatics and saturates, and recovery of representative fractions of these types. This classification is used for specification purposes in rubber extender and processing oils. Note 18212;See Test Method D2226. 1.2 This test method is not directly applicable to oils of greater than 0.1 mass % pentane insolubles. Such oils can be analyzed after removal of these materials, but precision is degraded (see Appendix X1). 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific warning statements are given in 6.1, Section 7, A1.4.1, and A1.5.5.
信息：ICS：83.040.20 (Rubber compounding ingredients) CCS：G34 发布：2011 实施：

ASTM D4573-2003 橡胶化学制品的标准试验方法.被油浸过的硫磺中含油量的测定
简介：This test method measures the hydrocarbon oils added to sulfur to help control dusting of the sulfur. It can be used for research, development, and quality control to measure the level of oil added to the sulfur to help maintain the oil content at required levels.1.1 This test method covers the determination of the amount of hydrocarbon oils added to oil-treated sulfurs. The test method is employed when the amount of oil added is 1 % or more of the total sample.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.040.20 (Rubber compounding ingredients) CCS：G34 发布：2003 实施：

ASTM D3568-1998 橡胶用的标准试验方法.评价包括与油混合的EPDM(乙烯丙烯二烯三聚物)
简介：1.1 These test methods specify the standard materials, test formulas, mixing procedures, and test methods for the evaluation and production control of ethylene propylene diene rubbers (EPDM). 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS： CCS：G34 发布：1998 实施：

ASTM D3484-06(2010) 橡胶的标准试验方法&8212；充油溶液BR（聚丁二烯橡胶）的评价
简介：
信息：ICS：83.060 CCS： 发布：2010-12-01 实施：

ASTM D4573-2003(2009) 橡胶加工用化学药品的标准试验方法.测定被油浸过的硫磺中的含油量
简介：This test method measures the hydrocarbon oils added to sulfur to help control dusting of the sulfur. It can be used for research, development, and quality control to measure the level of oil added to the sulfur to help maintain the oil content at required levels.1.1 This test method covers the determination of the amount of hydrocarbon oils added to oil-treated sulfurs. The test method is employed when the amount of oil added is 1 % or more of the total sample. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.040.20 (Rubber compounding ingredients) CCS：G34 发布：2003 实施：

ASTM D3484-97(2002) 扩油溶液BR（聚丁二烯橡胶）橡胶评价标准试验方法
简介：
信息：ICS：83.060 CCS： 发布：1997-11-10 实施：

ASTM D3185-06(2010) 丁苯橡胶（包括与油的混合物）的橡胶评定的标准试验方法
简介：
信息：ICS：83.060 CCS： 发布：2010-12-01 实施：

ASTM D2007-2003(2008) 用粘土胶吸收色谱法测定橡胶膨胀剂和加工油以及其他石油衍生油的特性集的标准试验方法
简介：The composition of the oil included in rubber compounds has a large effect on the characteristics and uses of the compounds. The determination of the saturates, aromatics, and polar compounds is a key analysis of this composition. The determination of the saturates, aromatics, and polar compounds and further analysis of the fractions produced is often used as a research method to aid understanding of oil effects in rubber and other uses.1.1 This test method covers a procedure for classifying oil samples of initial boiling point of at least 260x00B0;C (500x00B0;F) into the hydrocarbon types of polar compounds, aromatics and saturates, and recovery of representative fractions of these types. This classification is used for specification purposes in rubber extender and processing oils. Note 18212;See Test Method D 2226. 1.2 This test method is not directly applicable to oils of greater than 0.1 mass % pentane insolubles. Such oils can be analyzed after removal of these materials, but precision is degraded (see Appendix X1). 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific warning statements are given in 6.1, Section 7, A1.4.1, and A1.5.5.
信息：ICS：83.040.20 CCS：E45 发布：2003 实施：

ASTM D3484-97 扩油溶液BR（聚丁二烯橡胶）橡胶评价标准试验方法
简介：
信息：ICS： CCS： 发布：1997-11-10 实施：

ASTM D3568-03(2009) 橡胶的标准试验方法&8212；EPDM（乙烯-丙烯-二烯三元共聚物）的评价 包括与油的混合物
简介：
信息：ICS：83.060 CCS： 发布：2009-11-01 实施：

ASTM D3568-2003 橡胶的标准试验方法.包括与油混合的EPDM(三聚乙丙橡胶)的评估
简介：These test methods are intended mainly for referee purposes but may be used for quality control of rubber production. They may also be used in research and development work and for comparison of different rubber samples in a standard formula. These test methods may be used to obtain values for customer acceptance of rubber.1.1 These test methods specify the standard materials, test formulas, mixing procedures, and test methods for the evaluation and production control of ethylene propylene diene rubbers (EPDM). 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.060 (Rubber) CCS：G34 发布：2003 实施：

ASTM D4573-2003(2018) 橡胶化学品的标准试验方法油处理硫中油含量的测定
简介：
信息：ICS：83.040.20 CCS： 发布： 实施：0000-00-00

ASTM D4573-03(2009) 橡胶化学品的标准试验方法&8212；油处理硫磺中油含量的测定
简介：
信息：ICS：83.040.20 CCS： 发布：2009-01-01 实施：

ASTM D2007-2003 粘土凝胶吸附色谱法测定橡胶填充剂和加工油及其他石油衍生油的特性组的标准试验方法
简介：The composition of the oil included in rubber compounds has a large effect on the characteristics and uses of the compounds. The determination of the saturates, aromatics, and polar compounds is a key analysis of this composition. The determination of the saturates, aromatics, and polar compounds and further analysis of the fractions produced is often used as a research method to aid understanding of oil effects in rubber and other uses.1.1 This test method covers a procedure for classifying oil samples of initial boiling point of at least 260176;C (500176;F) into the hydrocarbon types of polar compounds, aromatics and saturates, and recovery of representative fractions of these types. This classification is used for specification purposes in rubber extender and processing oils.Note 18212;See Test Method D 2226.1.2 This test method is not directly applicable to oils of greater than 0.1 mass % pentane insolubles. Such oils can be analyzed after removal of these materials, but precision is degraded (see Appendix X1).1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific warning statements are given in 6.1, Section 7, A1.4.1, and A1.5.5.
信息：ICS：83.040.20 (Rubber compounding ingredients) CCS：G34 发布：2003 实施：

ASTM D2007-19 用粘土测定橡胶填充剂、加工油和其他石油衍生油中特征基团的标准试验方法&8212；凝胶吸收色谱法
简介：
信息：ICS：83.040.20 CCS：/ 发布： 实施：0000-00-00

ASTM D2007-03(2008) 通过粘土凝胶吸附色谱法在橡胶延伸剂和加工油及其他石油衍生油中的特征组的标准试验方法
简介：
信息：ICS：83.040.20 CCS： 发布：2008-12-01 实施：

ASTM D3568-2003(2009) 橡胶的标准试验方法:评价包括与油混合的EPDM(三聚乙丙橡胶)的标准试验方法
简介：These test methods are intended mainly for referee purposes but may be used for quality control of rubber production. They may also be used in research and development work and for comparison of different rubber samples in a standard formula. These test methods may be used to obtain values for customer acceptance of rubber.1.1 These test methods specify the standard materials, test formulas, mixing procedures, and test methods for the evaluation and production control of ethylene propylene diene rubbers (EPDM). 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.060 (Rubber) CCS：G34 发布：2003 实施：

ASTM D3484-2006(2016) 橡胶的标准试验方法&x2014;充油溶液BR (聚丁二烯橡胶) 的评估
简介：3.1x00a0;These tests are mainly intended for referee purposes but may also be used for quality control of rubber production. They may be used in research and development work for comparison of different rubber samples in a standard formula. 3.2x00a0;These test methods may also be used to obtain values for customer acceptance of rubber. 1.1x00a0;These test methods cover the standard materials, test formulas, mixing procedures, and test methods for the evaluation and production control of oil-extended polybutadiene rubber (OE-BR) polymerized in an appropriate solution. 1.2x00a0;The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.060 CCS： 发布： 实施：

ASTM D3186-07 橡胶的标准试验方法&8212；炭黑或炭黑与油混合的丁苯橡胶（SBR）的评价
简介：
信息：ICS：83.060 CCS： 发布：2007-03-01 实施：

ASTM D4573-2003(2014) 橡胶加工用化学药品的标准试验方法. 被油浸过的硫磺中的含油量的测定
简介：4.1x00a0;This test method measures the hydrocarbon oils added to sulfur to help control dusting of the sulfur. It can be used for research, development, and quality control to measure the level of oil added to the sulfur to help maintain the oil content at required levels. 1.1x00a0;This test method covers the determination of the amount of hydrocarbon oils added to oil-treated sulfurs. The test method is employed when the amount of oil added is 18201;% or more of the total sample. 1.2x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.040.20 CCS： 发布：2003 实施：

简介： 信息：

ASTM D3186-2007 橡胶的标准试验方法.与炭黑或炭黑和油混合的丁苯橡胶(SBR)的评定
简介：These test methods are intended mainly for referee purposes but may be used for quality control of masterbatch production. They may also be used in research and development work and for comparison of different rubber samples in a standard formula. These test methods may also be used to obtain values for customer acceptance of rubber.1.1 These test methods cover the standard materials, test formula, mixing procedures, and test methods for the evaluation and production control of pigmented types of styrene-butadiene rubbers (SBR). This includes the pigmented SBR oil master batches.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.060 (Rubber) CCS：G34 发布：2007 实施：

ASTM D3568-98(2002) 橡胶的标准试验方法&8212；EPDM（乙烯-丙烯-二烯三元共聚物）的评价 包括与油的混合物
简介：
信息：ICS：83.060 CCS： 发布：2002-12-10 实施：

简介： 信息：

ASTM D3186-2007(2011) 橡胶的标准试验方法.加炭黑或加炭黑和油混合的丁苯橡胶(SBR)的评估
简介：These test methods are intended mainly for referee purposes but may be used for quality control of masterbatch production. They may also be used in research and development work and for comparison of different rubber samples in a standard formula. These test methods may also be used to obtain values for customer acceptance of rubber.1.1 These test methods cover the standard materials, test formula, mixing procedures, and test methods for the evaluation and production control of pigmented types of styrene-butadiene rubbers (SBR). This includes the pigmented SBR oil masterbatches. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.060 (Rubber) CCS：G34 发布：2007 实施：

ASTM D2007-02 用粘土测定橡胶填充剂、加工油和其他石油衍生油中特征基团的标准试验方法&8212；凝胶吸收色谱法
简介：
信息：ICS：83.040.20 CCS： 发布：2002-11-11 实施：

简介： 信息：