机械危险检测标准

发布时间：2023-03-01 10:10:13 • 阅读量： • 来源：中析研究所

机械危险检测标准相关信息

GB/T 38367-2019 机械安全点燃危险的风险评估
简介：
信息：ICS：13.110 CCS：J09 发布：2019-12-31 00:00:00.0 实施：2020-07-01 00:00:00.0

BS ISO 11684-1995 拖拉机,农林机械,电动草坪和园艺设施.安全性标志和危险图解.总则
简介：
信息：ICS：65.060.01 CCS：B90 发布：2010-07-31 实施：2010-07-31

DIN EN ISO 14121-1-2007 机械安全.危险评估.第1部分:原则
简介：This part of ISO 14121 establishes general principles intended to be used to meet the risk reduction objectivesestablished in ISO 12100-1:2003, Clause 5. These principles of risk assessment bring together knowledgeand experience of the design, use, incidents, accidents and harm related to machinery in order to assess therisks posed during the relevant phases of the life cycle of a machine.This part of ISO 14121 provides guidance on the information that will be required to enable risk assessment tobe carried out. Procedures are described for identifying hazards and estimating and evaluating risk.It also gives guidance on the making of decisions relating to the safety of machinery and on the type ofdocumentation required to verify the risk assessment carried out.It is not applicable to risks posed to domestic animals, property or the environment.
信息：ICS：13.110 CCS：C66 发布：2007-12 实施：2007-12-01

GB/T 33579-2017 机械安全危险能量控制方法上锁/挂牌
简介：
信息：ICS：13.110 CCS：J09 发布：2017-05-12 00:00:00.0 实施：2017-12-01 00:00:00.0

BIP 2184-2010 机械和工作设备的危险管理
简介：
信息：ICS：03.100.01 CCS：J09 发布：2010-01-11 实施：2010-01-11

KS B 6947-2007 机械安全性.防止上肢接近危险区域的安全距离
简介：? ??? 3? ??? ??? ???? ?? ???? ?? ?? ??? ???? ?? ??
信息：ICS：13.110 CCS：J00 发布：2007-10-25 实施：2007-10-25

GB 10396-2006 农林拖拉机和机械、草坪和园艺动力机械.安全标志和危险图形.总则
简介： 本标准规定了农林拖拉机和机械、草坪和园艺动力机械用安全标志和危险图形的设计和使用原则。本标准还给出了安全标志的作用、安全标志的基本型式和颜色、安全标志带的设计规范等。
信息：ICS：01.080.20;65.060.01 CCS：B90 发布：2006-03-29 实施：2006-11-01

DIN EN 842-2009 机械安全.可视危险信号.一般要求、设计和试验
简介：This European Standard describes criteria for the perception of visual danger signals in the area that peopleare intended to perceive and to react to such a signal. It specifies the safety and ergonomic requirements andthe corresponding physical measurements and subjective visual check. It also provides guidance for thedesign of the signals to be clearly perceived and differentiated as described in 5.3 of EN 292-2:1991.This European Standard does not apply to danger indicators: Presented in either written or pictorial form; Transmitted by data display units.This European Standard does not apply to special regulations such as those for public disaster and publictransport.
信息：ICS：13.110 CCS：C65 发布：2009-01 实施：2009-01-01

BS EN ISO 14121-1-2007 机械安全.危险评估.原则
简介：ISO 14121-1:2007 establishes general principles intended to be used to meet the risk reduction objectives established in ISO 12100-1:2003, Clause 5. These principles of risk assessment bring together knowledge and experience of the design, use, incidents, accidents and harm related to machinery in order to assess the risks posed during the relevant phases of the life cycle of a machine.ISO 14121-1:2007 provides guidance on the information that will be required to enable risk assessment to be carried out. Procedures are described for identifying hazards and estimating and evaluating risk. It also gives guidance on the making of decisions relating to the safety of machinery and on the type of documentation required to verify the risk assessment carried out.It is not applicable to risks posed to domestic animals, property or the environment.
信息：ICS：13.110 CCS：C66 发布：2007-09-28 实施：2007-09-28

GB 20178-2006 土方机械.安全标志和危险图示.通则
简介： 本标准概述了土方机械用安全标志的作用，规定了安全标志和危险图示的设计和使用通则、安全标志的基本形式和颜色，以及安全标志的构成。本标准适用于GB/T 8498规定的土方机械。
信息：ICS：53.100 CCS：P97 发布：2006-03-29 实施：2006-11-01

GOST R EN 388-2009 职业安全标准体系.手的个人保护方法.机械危险防护手套.技术要求.测试方法
简介：
信息：ICS：13.340.40 CCS：发布：2009 实施：2010-12-01

ISO 14121-1-2007 机械安全.危险评估.第1部分:原理
简介：This part of ISO 14121 establishes general principles intended to be used to meet the risk reduction objectives established in ISO 12100-1:2003, Clause 5. These principles of risk assessment bring together knowledge and experience of the design, use, incidents, accidents and harm related to machinery in order to assess therisks posed during the relevant phases of the life cycle of a machine.This part of ISO 14121 provides guidance on the information that will be required to enable risk assessment to be carried out. Procedures are described for identifying hazards and estimating and evaluating risk.It also gives guidance on the making of decisions relating to the safety of machinery and on the type of documentation required to verify the risk assessment carried out.It is not applicable to risks posed to domestic animals, property or the environment.
信息：ICS：13.110 CCS：C66;J04 发布：2007-09 实施：

GB 10396-1999 农林拖拉机和机械、草坪和园艺动力机械安全标志和危险图形总则
简介： 本标准规定了农林拖拉机和机械、草坪和园艺动力机械用安全标志和危险图形的设计和使用导则。
信息：ICS：01.080.20;65.060.01 CCS：B90 发布：1999-02-14 实施：1999-12-01

NF E09-070/IN1-2008 机械安全.评定和降低由机器辐射产生的危险.第1部分:一般原则
简介：
信息：ICS：13.110 CCS：C71 发布：2008-11-01 实施：

NF X35-106-5-2007 机械安全.人体物理特性.第5部分:高频重复搬运的危险评估
简介：
信息：ICS：13.110;13.180 CCS：C66 发布：2007-05-01 实施：2007-05-05

GB/T 32070-2015 土方机械危险监测系统及其可视辅助装置性能要求和试验
简介：
信息：ICS： CCS：发布：实施：2016-06-01

NF X35-118-2008 机械的安全性.可听的和可视的危险信号及信息信号系统
简介：
信息：ICS：13.110 CCS：C66 发布：2008-11-01 实施：2008-11-22

NF E09-081-3-2007 机械的安全性.空气中危险物质排放的评定.第3部分:测定给出污染物排放率的试验台法
简介：
信息：ICS：13.040.40;13.300 CCS：C70 发布：2007-02-01 实施：2007-02-20

KS K ISO 23388-2022 防机械危险的防护手套
简介：
信息：ICS：13.340.40 CCS：发布：2022-08-25 实施：

NF X35-116/IN1-2008 机械的安全性.可视的危险警报信号.一般要求、设计和试验
简介：
信息：ICS：13.110;13.180 CCS：C66 发布：2008-11-01 实施：

EN 1093-3-2006 机械安全.空中危险物质的排放评估.第3部分:测量给出污染物排放率的试验台法.包含修改件A1-2008
简介：This European Standard specifies a test bench method for the measurement of the emission rate of a given airborne hazardous substance from machines using a test bench under specified operating conditions of the machine. The measurement of the emission rates of a given pollutant emitted from machines can serve for: a) the evaluation of the performance of a machine; b) the evaluation of the reduction of pollutant emissions of the machine; c) the comparison of machines within groups of machines with the same intended use (groups are defined by the function and materials processed); d) the ranking of machines from the same group according to their emission rates; e) the determination of the state of the art of machines with respect to their emission rates.This European Standard is not applicable to machinery which is manufactured before the date of its publication as an EN.
信息：ICS：13.040.40;13.110 CCS：发布：2006 实施：

KS B ISO 16001-2020 土方机械危险检测系统和视觉辅助设备性能要求和试验
简介：
信息：ICS：53.100 CCS：发布：2020-06-01 实施：

NF X35-118/IN1-2008 机械的安全性.危险警报和信息提示信号的视听系统
简介：
信息：ICS：13.110;13.180 CCS：C66 发布：2008-11-01 实施：

SANS 868-4-2005 用于带有爆炸性气体环境和/或爆炸性粉尘环境的矿井和工厂的压缩点火引擎系统和由此引擎系统提供动力的机械装置．第4部分：地下煤矿非危险场所
简介：Specifies constructional and performance requirements for commercial transport vehicles for use in non-hazardous locations in underground mines. The main purpose of this standard is to allow the introduction of commercial vehicles, adapted to prevent the
信息：ICS：27.020;29.260.20 CCS：发布：2005-12-02 实施：

ISO 13857:2019 机械安全 - 安全距离防止上肢和下肢到达危险区域
简介：
信息：ICS：13.110 CCS：发布：2019-10-10 实施：

NF X35-116-2008 机械的安全性.可视的危险警报信号.一般要求、设计和试验
简介：
信息：ICS：13.110 CCS：C66 发布：2008-11-01 实施：2008-11-22

SANS 868-1-2-2005 用于带有爆炸性气体环境和/或爆炸性粉尘环境的矿井和工厂的压缩点火引擎系统和由此引擎系统提供动力的机械装置．第1．2部分：地下矿井危险场所．爆炸保护
简介：Specifies constructional and performance requirements for explosion protected compression-ignition engine systems for use in hazardous locations in underground mines.
信息：ICS：27.020;29.260.20 CCS：D98 发布：2005-03-18 实施：2005-03-18

KS B ISO 9244-2017 土方机械安全标志和危险图示通则
简介：
信息：ICS： CCS：发布：2017-12-13 实施：

NF E09-070-2008 机械安全.评定和降低由机器辐射产生的危险.第1部分:一般原则
简介：
信息：ICS：13.110;13.280 CCS：C71 发布：2008-11-01 实施：2008-11-22

SANS 868-1-1-2005 用于带有爆炸性气体环境和/或爆炸性粉尘环境的矿井和工厂的压缩点火引擎系统和由此引擎系统提供动力的机械装置．第1．1部分：地下矿井危险场所．基本爆炸保护
简介：Specifies constructional and performance requirements for basic explosion protected engines for use in hazardous locations in underground mines and works. It facilitates the repair of the engine as a specialized activity. Specific provision is made for g
信息：ICS：27.020;29.260.20 CCS：D98 发布：2005-03-18 实施：

KS B ISO 9244-2017(2022) 土方机械安全标志和危险图片总则
简介：
信息：ICS： CCS：发布：2017-12-13 实施：

NF E09-081-9-2008 机械安全.空气中危险物质排放的评定.第9部分:用房间法测定污染物浓度参数
简介：
信息：ICS：13.040.40 CCS：J09 发布：2008-09-01 实施：2008-09-20

SANS 868-1-3-2005 用于带有爆炸性气体环境和/或爆炸性粉尘环境的矿井和工厂的压缩点火引擎系统和由此引擎系统提供动力的机械装置．第1．3部分：地下矿井危险场所．机械设备
简介：Specifies constructional and performance requirements for machines fitted with explosion protected compression-ignition engine systems,for use in hazardous locations in underground mines and works.
信息：ICS：27.020;29.260.20 CCS：D98 发布：2005-03-18 实施：

BS EN 388-2016 防机械危险的防护手套
简介：
信息：ICS：13.340.40 CCS：C73 发布：2016-11-30 实施：2016-11-30

EN 981+A1-2008 机械安全.听觉和视觉的危险和信息信号系统
简介：To reduce risks associated with misinterpretation of visual and auditory danger signals, a system of danger and information signals is specified taking into account the different degrees of urgency. This European Standard is applicable to all danger and information signals which have to be clearly perceived and differentiated as specified in 5.3 of EN 292-2:1991, by other requirements or by the work situation, and to all degrees of urgency - from extreme urgency to an ALL CLEAR situation. Where visual signals are to be complementary to sound signals, the signal character is specified for both. This European Standard does not apply to certain fields covered by specific standards or other conventions in force (international or national); in particular, fire alarms, medical alarms, alarms used in the field of public transport, navigation signals and signals for special fields of activity (for example, military). When new signals are being planned, however, this European Standard should be considered in order to avoid inconsistency. For auditory signals, the system of signal character is a guideline for a signal language based on message categories which are classified according to urgency. Certain characters are specified for purposes which require safe and rapid recognition. Certain categories allow possibilities for variants, e. g. control and warning signals at workplaces where the signalling is intended for personnel with specific training. For visual signals, the established meanings of the safety colours are not affected by this European Standard. For different needs, complementary meanings have been assigned to the signals by timed patterns, and in a very few cases by alternating colours.
信息：ICS：13.110 CCS：C90 发布：2008-09 实施：

PD CEN/TR 15172-1-2005 整体振动.减少振动危险导则.第1部分:机械设计的技术措施
简介：This Technical Report provides best practices and methods available for limiting the effects of mechanicalwhole-body vibration on operators’ positions. The guidelines given outline practical ways in which whole-bodyvibration hazards associated with mobile machinery can be reduced by machinery design. The TechnicalReport covers four important aspects of the reduction of the effects arising from exposure to hazardousmachinery vibration:a) identification of main sources and operational modes producing vibration that might be hazardous tohealth and of additional factors worsening the adverse health effects of vibration on the operators;b) reduction of vibration magnitudes at source;c) reduction of transmission of vibration from source to the operator;d) ergonomic adaptation of operators’ position: posture, range of vision.This Technical Report does not provide universal or detailed technical solutions but only a review ofengineering methods available. It is not concerned with hand-arm vibration which is covered by CR 1030-1.This Technical Report is primarily intended as a guideline for people involved in purchasing, using, supplying,marketing or inspecting mobile machinery. It is also intended to be a guidance for writers of type C standardsfor specific types of machinery.
信息：ICS：13.160;17.160 CCS：发布：2005 实施：

BS EN 388-2016 防机械危险的防护手套
简介：
信息：ICS：13.340.40 CCS：C73 发布：2016-11-30 实施：2016-11-30

EN 842+A1-2008 机械安全.视觉危险信号.一般要求,设计和测试
简介：This European Standard describes criteria for the perception of visual danger signals in the area that people are intended to perceive and to react to such a signal. It specifies the safety and ergonomic requirements and the corresponding physical measurements and subjective visual check. It also provides guidance for the design of the signals to be clearly perceived and differentiated as described in 5.3 of EN 292-2:1991. This European Standard does not apply to danger indicators: Presented in either written or pictorial form; Transmitted by data display units. This European Standard does not apply to special regulations such as those for public disaster and public transport.
信息：ICS：13.110 CCS：A83 发布：2008-09 实施：

CNS 14805-2004 机械安全－防止上肢触及危险区域之安全距离
简介：本标准所建立之安全距离值适用于防止三岁以上之人的上肢到达危险区域之安全距离。此距离用于以该距离就可以达到适当安全之情形。
信息：ICS：13.110 CCS：发布：2004-04-20 实施：2004-04-20

KS B ISO 16001-2012 土方机械.危险检测系统与视力保护装置.性能要求事项与测试
简介：이 표준은 토공기계에 사용되는 위험감지시스템(HDS)과 시각보조장치(VA)의 성능에 대한
信息：ICS：53.100 CCS：P95 发布：2012-12-26 实施：2012-12-26

DIN EN ISO 13857-2008 机械安全.上部和下部机械臂延伸的危险区域防护的安全距离
简介：This International Standard establishes values for safety distances in both industrial and non-industrialenvironments to prevent machinery hazard zones being reached. The safety distances are appropriate forprotective structures. It also gives information about distances to impede free access by the lower limbs(see 4.3).This International Standard covers people of 14 years and older (the 5th percentile stature of 14 year olds isapproximately 1 400 mm). In addition, for upper limbs only, it provides information for children older than3 years (5th percentile stature of 3 year olds is approximately 900 mm) where reaching through openingsneeds to be addressed.NOTE I Data for preventing lower limb access for children is not considered.The distances apply when adequate safety can be achieved by distance alone. Because safety distancesdepend on size, there will be some people of extreme dimensions who will be able to reach hazard zoneseven when the requirements of this International Standard are complied with.NOTE 2 These safety distances will not provide sufficient protection against certain hazards, for example, radiationand emission of substances. For such hazards, additional or other measures need to be taken.The clauses of the International Standard covering lower limbs apply when access by the upper limbs is notforeseeable according to the risk assessment.The safety distances are intended to protect those persons trying to reach hazard zones under the conditionsspecified (see 4.1.1 ).NOTE 3 This International Standard is not intended to provide measures against reaching a hazard zone by climbingover.
信息：ICS：13.110 CCS：C65;J09 发布：2008-06 实施：2008-06-01

CNS 14806-2004 机械安全－防止下肢触及危险区域之安全距离
简介：本标准所建立之安全距离值适用于防止十四岁以上之人的下肢进入及可以阻止自由进入机械危险区之距离。
信息：ICS：13.110 CCS：发布：2004-04-20 实施：2004-04-20

NF E58-157-2008 土方机械.危险探测设备和目视辅助设备.性能要求和试验.
简介：
信息：ICS：53.100 CCS：P97 发布：2008-05-01 实施：2008-05-30

NF S75-502-2004 防机械危险的防护手套
简介：
信息：ICS：13.340.40 CCS：C73 发布：2004-04-01 实施：2004-04-05

JIS B9100-2012 农林拖拉机和机械,草坪和园艺动力机械.安全标志和危险图示.通则
简介：
信息：ICS：01.080.20;65.060.01 CCS：B91 发布：2012-02-20 实施：

ISO 16001:2008 土方机械——危险检测系统和视觉辅助装置——性能要求和测试
简介：
信息：ICS：53.100 CCS：发布：2008-02-25 实施：

SANS 1654-2004 在矿地中的危险场所使用的直流电动（蓄电池动力）机械
简介：This standard specifies requirements for d.c.-powered (battery-operated) machines for use in hazardous locations in mines.
信息：ICS：29.260.20 CCS：发布：2004 实施：

ISO 16001-2008 土方机械.危险探测设备和目视辅助设备.性能要求和试验
简介：
信息：ICS：53.100 CCS：P95 发布：2008-02 实施：

KS F ISO 9244-2003 土方机械.安全信号和危险图形符号的通用原则
简介：이 규격은 ISO 6165에 정의한 건설 기계에 영구 부착하는 안전 표시 및 위험 그림
信息：ICS：53.100;01.080.20 CCS：P97 发布：2003-12-31 实施：2003-12-31

GOST EN 388-2012 职业安全标准体系.个人护手方法.防机械危险的防护手套.技术要求.试验方法
简介：
信息：ICS：13.340.40 CCS：发布：2012 实施：2013-09-01

TCVN 6720-2000 机械安全.防止上肢触及危险区域的安全距离
简介：
信息：ICS： CCS：发布：2008 实施：

JIS A8338-2011 土方机械.危险探测设备和目视辅助设备.性能要求和试验
简介：
信息：ICS：53.100 CCS：P95 发布：2011-02-21 实施：

TCVN 7014-2002 机械安全.防止下肢触及危险区域的安全距离
简介：
信息：ICS： CCS：发布：2008 实施：

BS EN 388-2003 防机械危险的防护手套
简介：This European Standard specifies requirements, test methods, marking and information to be supplied, for protective gloves against the mechanical risks of abrasion, blade cut, tear and puncture.This standard is only applicable in conjunction with EN 420.The test methods developed in this standard can also be applicable to arm protectors which are protective devices separate from the glove or the clothing.
信息：ICS：13.340.40 CCS：C73 发布：2003-09-25 实施：2003-09-25

ANSI/ASABE AD11684-2011 农业和林业用机械,拖拉机,动力草坪和园艺设备.安全标志和危险图示.通用规则
简介：
信息：ICS：65.060.01 CCS：B90 发布：2011 实施：

ISO/TR 14121-2-2007 机械安全.危险评估.第2部分:实施指南和评估方法实例
简介：This part of ISO 14121 gives practical guidance on the conducting of risk assessments for machinery inaccordance with ISO 14121-1 and describes various methods and tools for each step in the process.It also provides practical guidance on risk reduction (in accordance with ISO 12100) for machinery, givingadditional guidance on the selection of appropriate protective measures for achieving safety.The intended users of this part of ISO 14121 are those involved in the integration of safety into the design,installation or modification of machinery (e.g. designers, technicians, safety specialists).
信息：ICS：13.110 CCS：C66 发布：2007-12 实施：

EN 388-2003 防机械危险的防护手套
简介：This European Standard specifies requirements, test methods, marking and information to be supplied, forprotective gloves againstThe mechanical risks of abrasion, blade cut, tear and puncture.This standard is only applicable in conjunction with EN 420.The test methods developed inThis standard can also be applicable to arm protectors which are protective devicesseparate fromThe glove orThe clothing.
信息：ICS：01.040.59;59.080.30 CCS：发布：2003-09-01 实施：