荣誉资质图片

cma资质(CMA)     CNAS资质(CNAS)     iso体系(ISO) 高新技术企业(高新技术企业)

接触电阻检测标准相关信息

GB/T 15078-2021 贵金属电触点材料接触电阻的测量方法
简介:
信息:ICS:77.120.99 CCS:H21 发布:2021-08-20 00:00:00.0 实施:2022-03-01 00:00:00.0

KS C IEC 60512-2-6-2008 电子设备连接器.试验和测量.第2-6部分:电连续性和接触电阻试验.试验2f:外壳电连续性
简介:이 표준에서 정의하고 있는 세부 명세에 따른 시험은 IEC 기술위원회 48의 업무 범위인
信息:ICS:31.220.10 CCS:L23 发布:2008-11-28 实施:2008-11-28

DIN EN 60512-2-2-2004 电子设备连接器.试验和测量.第2-2部分:电连续性和接触电阻试验.试验2b:接触电阻.规定试验电流法
简介:The object of this test is to define a standard test method to measure the electrical resistance across a pair of mated contacts or a contact with a measuring gauge.
信息:ICSCCS:L23 发布:2004-01 实施:2004-01-01

GB/T 15078-2008 贵金属电触点材料接触电阻的测量方法
简介:本标准规定了贵金属及其合金电触点材料(静态)接触电阻的测量方法。本标准适用于贵金属及其合金电触点材料接触电阻的测量。其他金属及合金电触点材料也可参照使用。
信息:ICS:77.120.99 CCS:H68 发布:2008-03-31 实施:2008-09-01

KS C IEC 60512-2-1-2008 电子设备连接器.试验和测量.第2-1部分:电连续性和接触电阻试验.试验2a:接触电阻.毫伏法
简介:이 표준은 IEC TC 48의 업무 범위 내에서 전자 기계적 부품에 적용한다. 이 시험은
信息:ICS:31.220.10 CCS:L23 发布:2008-11-28 实施:2008-11-28

DIN EN 60512-2-5-2004 电子设备连接器.试验和测量.第2-5部分:电连续性和接触电阻试验.试验2e:接触干扰
简介:The object of this test is to define a standard test method for detecting contact disturbance of electromechanical components under specified dynamic conditions.
信息:ICS:31.220.10 CCS:L23 发布:2004-01 实施:2004-01-01

GB/T 5095.2-1997 电子设备用机电元件 基本试验规程及测量方法 第2部分;一般检查、电连续性和接触电阻测试、绝缘试验和电压应力试验
简介: 本标准规定的试验方法,在IEC/TC48范围内的电子设备用机电元件的详细规范要求时,应给以采用。类似元件的详细规范要求时,也可以采用。
信息:ICS:31.220 CCS:L23 发布:1997-12-26 实施:1998-10-01

KS C IEC 60512-2-3-2008 电子设备连接器.试验和测量.第2-3部分:电连续性和接触电阻试验.试验2c:接触电阻偏差
简介:KS C IEC 60512의 이 부에서 정의하고 있는 세부 명세에 따른 시험은 IEC TC
信息:ICS:31.220.10 CCS:L23 发布:2008-11-28 实施:2008-11-28

ASTM B667-97(2003)e1 测量电接触电阻用探针的结构和使用的标准实施规程
简介:
信息:ICS:17.220.20 CCS发布:2003-11-01 实施

GB/T 15078-1994 贵金属电触点材料接触电阻的测量方法
简介: 本标准规定了贵金属及其合金电触点材料接触电阻的测量方法(静态接触)。 本标准适用于贵金属及其合金电触点材料接触电阻的测量。其他金属及合金电触点材料亦可参照使用。
信息:ICSCCS:H21 发布:1994-05-11 实施:1994-12-01

KS C IEC 60512-2-6-2008 电子设备连接器.试验和测量.第2-6部分:电连续性和接触电阻试验.试验2f:外壳电连续性
简介:이 표준에서 정의하고 있는 세부 명세에 따른 시험은 IEC 기술위원회 48의 업무 범위인
信息:ICS:31.220.10 CCS:L23 发布:2008-11-28 实施:2008-11-28

NF C93-400-2-2-2003 电子设备连接器.试验和测量.第2-2部分:电连续性和接触电阻试验.试验2b:接触电阻.规定试验电流法
简介:
信息:ICS:31.220.10 CCS:L23 发布:2003-11-01 实施:2003-11-05

IEC 62899-503-3:2021 印刷电子.第503-3部分:质量评定.印刷薄膜晶体管接触电阻的测量方法.传输长度法
简介:
信息:ICS:31.080.30 CCS发布:2021-08-24 实施

KS C IEC 60512-2-1-2008 电子设备连接器.试验和测量.第2-1部分:电连续性和接触电阻试验.试验2a:接触电阻.毫伏法
简介:이 표준은 IEC TC 48의 업무 범위 내에서 전자 기계적 부품에 적용한다. 이 시험은
信息:ICS:31.220.10 CCS:L23 发布:2008-11-28 实施:2008-11-28

NF C93-400-2-5-2003 电子设备连接器.试验和测量.第2-5部分:电连续性和接触电阻试验.试验2e:接触干扰
简介:
信息:ICS:31.220.10 CCS:L23 发布:2003-11-01 实施:2003-11-05

ASTM B539-20 电连接电阻测量的标准试验方法(静态接触)
简介:
信息:ICS:29.120.20 CCS发布:2020-04-01 实施

ASTM B539-02(2008) 电连接电阻测量的标准试验方法(静态接触)
简介:
信息:ICS:29.120.20 CCS发布:2008-03-01 实施

BS EN 60512-2-2-2003 电子设备连接器.试验和测量.电连续性和接触电阻试验.试验2b.接触电阻.规定试验电流法
简介:This part of IEC 60512, when required by the detail specification, is used for testing connectors for electronic equipment within the scope of IEC technical committee 48. This test may also be used for similar devices when specified in a detail specification.The object of this test is to define a standard test method to measure the electrical resistance across a pair of mated contacts or a contact with a measuring gauge.
信息:ICS:31.220.10 CCS:L23 发布:2003-07-31 实施:2003-07-31

ASTM B667-97(2019) 测量电接触电阻用探针的结构和使用的标准实施规程
简介:
信息:ICS:17.220.20 CCS发布:2019-11-01 实施

ANSI/SCTE 152-2008 主要插头接口的接触电阻测量用试验程序
简介:The purpose of this test procedure is to measure the resistance between the contact of the connector and cable interfaces. High resistance contacts may cause excessive energy losses, overheating and possibly common path distortions. It is most desirable to have contact resistance as low as possible.
信息:ICS:29.120.30 CCS:K32 发布:2008 实施

EN 60512-2-2-2003 电子设备用连接器.试验和测量.第2-2部分:电连续性和接触电阻试验.试验2b:接触电阻.规定试验电流法 IEC 60512-2-2-2003
简介:
信息:ICSCCS发布:2003-07-01 实施

ASTM B539-18 电连接电阻测量的标准试验方法(静态接触)
简介:
信息:ICS:29.120.20 CCS发布:2018-11-01 实施

ASTM B63-07 金属导电电阻和接触材料电阻率的标准试验方法
简介:
信息:ICS:77.040.99 CCS发布:2007-05-01 实施

EN 60512-2-5-2003 电子设备用连接器.试验和测量.第2-5部分:电连续性和接触电阻试验.试验2e:接触干扰 IEC 60512-2-5-2003
简介:
信息:ICSCCS发布:2003-07-01 实施

ASTM B63-07(2018) 金属导电电阻和接触材料的电阻率的标准测试方法
简介:
信息:ICS:77.040.99 CCS发布:2018-11-01 实施

JB/T 6954-2007 灰铸铁接触电阻加热淬火质量检验和评级
简介: 本标准规定了灰铸铁接触电阻加热淬火质量检验和评定。 本标准适用于采用铜滚轮电极接触电阻加热淬火的场合,其他电极接触电阻加热淬火质量检验和评级也可参照执行。
信息:ICS:25.200 CCS:J36 发布:2007-03-06 实施:2007-09-01

IEC 60512-2-5:2003 电子设备连接器 - 测试和测量第2-5部分:电气连续性和接触电阻测试 - 测试2e:接触骚扰
简介:
信息:ICS:31.220.10 CCS发布:2003-05-16 实施

ASTM B667-97(2014) 测量电接触电阻用探针的结构和使用的标准实施规程
简介:
信息:ICS:17.220.20 CCS发布:2014-10-01 实施

ASTM B63-2007 金属传导电阻和接触材料的电阻系数用标准试验方法
简介:In the case of materials for resistors and heating elements, a knowledge of resistivity is important in determining whether wire or strip of a specified area of cross section and length will have a required resistance. It serves as one basis for the selection of materials for specific applications and its measurement is a necessary acceptance test for resistance materials. In the case of materials for electrical contacts, the measurement of resistivity can serve as a test for uniformity of materials of nominally the same composition and structure.1.1 This test method covers the determination, to a precision of 2 %, of the electrical resistivity of materials used in resistors, heating elements, and electrical contacts, as well as products of powder metallurgy processes which are used for other purposes. Note 1 - For determining the resistivity of electrical conductors, see Test Method B 193.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
信息:ICS:77.040.99 (Other methods of testing metals) CCS:K10 发布:2007 实施

IEC 60512-2-2:2003 电子设备连接器 - 测试和测量 - 第2-2部分:电气连续性和接触电阻测试 - 测试2b:接触电阻 - 指定的测试电流方法
简介:
信息:ICS:31.220.10 CCS发布:2003-05-16 实施

ASTM B539-02(2013) 电连接电阻测量的标准试验方法(静态接触)
简介:
信息:ICS:29.120.20 CCS发布:2013-08-01 实施

ASTM B63-2007(2013) 金属传导电阻和接触材料的电阻系数的标准试验方法
简介: 4.1x00a0;In the case of materials for resistors and heating elements, a knowledge of resistivity is important in determining whether wire or strip of a specified area of cross section and length will have a required resistance. It serves as one basis for the selection of materials for specific applications and its measurement is a necessary acceptance test for resistance materials. 4.2x00a0;In the case of materials for electrical contacts, the measurement of resistivity can serve as a test for uniformity of materials of nominally the same composition and structure. 1.1x00a0;This test method covers the determination, to a precision of 28201;%, of the electrical resistivity of materials used in resistors, heating elements, and electrical contacts, as well as products of powder metallurgy processes which are used for other purposes. Note 1x2014;For determining the resistivity of electrical conductors, see Test Method B193. 1.2x00a0;The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
信息:ICS:77.040.99 (Other methods of testing metals) CCS:K10 发布:2007 实施

IEC 60512-2-2-2003 电子设备连接器.试验和测量.第2-2部分:电连续性和接触电阻试验.试验2b:接触电阻.规定试验电流法
简介:Defines a standard test method to measure the electrical resistance across a pair of mated contacts or a contact with a measuring gauge.
信息:ICS:31.220.10 CCS:L04 发布:2003-05 实施

ASTM B63-07(2013) 金属导电电阻和接触材料的电阻率的标准测试方法
简介:
信息:ICS:77.040.99 CCS发布:2013-05-01 实施

ANSI/EIA-364-23C-2006 电连接器和插座的低层接触电阻试验程序
简介:This test procedure may applies to any type or combination of current carrying members such as pin and socket contacts, relay contacts, wire and crimp connectors, or printed circuit board.
信息:ICS:29.120.20 CCS:L23 发布:2006 实施

IEC 60512-2-5-2003 电子设备连接器.试验和测量.第2-5部分:电连续性和接触电阻试验.试验2e:接触干扰
简介:Defines a standard test method for detecting contact disturbance of electromechanical components under specified dynamic conditions.
信息:ICS:31.220.10 CCS:L04 发布:2003-05 实施

KS K ISO 16603-2012(2017) 服装为针对与防护服的材料的电阻的血液和体液的测定接触保护使用合成血液通过血液和体液试验方法穿透
简介:
信息:ICS:13.340.10 CCS发布:2012-12-28 实施

JIS C5402-2-2-2005 电子设备连接器.试验和测量.第2-2部分:电连续性和接触电阻试验.试验2b:接触电阻.规定试验电流法
简介:この規格は,電子機器用コネクタの一対の結合したコンタクト間,又はコンタタトと測定ゲージ間との接触抵抗を測定するのための試験方法について規定する。
信息:ICS:31.220.10 CCS:L23 发布:2005-12-20 实施

DIN EN 60512-2-6-2003 电子设备连接器.试验和测量.第2-6部分:电力连续性和接触电阻试验.试验2f:外壳(壳式)电连续性 (IEC 60512-2-6:2002); 德文版本 EN 60512-2-6:2002
简介:The object of this test is to define a standard test method for measuring the resistance between component housings (shells) which are intended to provide electrical continuity when mated. This test is not intended to verify shielding against magnetic or r. f. interference.
信息:ICS:31.220.10;31.240 CCS:L23 发布:2003-01 实施:2003-01-01

KS K ISO 16604-2012(2017) 服装为针对与防护服的材料电阻的血液和体液的测定接触保护通过使用披-X174噬菌体血源性病原体试验方法穿透
简介:
信息:ICS:13.340.10 CCS发布:2012-12-28 实施

JIS C5402-2-5-2005 电子设备连接器.试验和测量.第2-5部分:电连续性和接触电阻试验.试验2e:接触干扰
简介:この規格は,電子機器用コネクタの規定する動的条件下でのコンタクトディスターバンスを検出するための試験方法について規定する。
信息:ICS:31.220.10 CCS:L23 发布:2005-12-20 实施

DIN EN 60512-2-3-2003 电子设备连接器.试验和测量.第2-3部分:电力连续性和接触电阻试验.试验2c:接触电阻变量 (IEC 60512-2-3:2002); 德文版本 EN 60512-2-3:2002
简介:The object of this test is to define a standard test method to determine the variation of contact resistance of electromechanical components under specified dynamic conditions. This test should be carried out only on components the contact resistance of which is measured by test 2a.
信息:ICS:31.220.10 CCS:L23 发布:2003-01 实施:2003-01-01

ANSI/SCTE 103-2012 F连接器和F81筒的分接电缆的直流接触电阻的试验方法
简介:The purpose of this test procedure is to measure the contact resistance or intimacy of contact between an F connector and the drop cable shield (outer conductor contact resistance) or the cable center conductor and the F81 barrel (inner conductor contact resistance.)
信息:ICS:33.120.01 CCS:K13 发布:2012 实施

JIS C5402-2-1-2005 电子设备用连接器.试验和测量.第2-1部分:电气连续性和接触电阻试验.试验2a:接触电阻.毫伏电平仪法
简介:この規格は,電子機器用コネクタ(以下,コネクタという。)の一対の結合したコンタクト間又はコンタクトと測定ゲージ間の電気的抵抗を測定するための試験方法について規定する。
信息:ICS:31.220.10 CCS:L23 发布:2005-03-20 实施

DIN EN 60512-2-1-2003 电子设备连接器.试验和测量.第2-1部分:电力连续性和接触电阻试验.试验2a:接触电阻.毫伏级方法 (IEC 60512-2-1:2002); 德文版本 EN 60512-2-1:2002
简介:The object of this tst is to define a standard test method to measure the electrical resistance across a pair of mated contacts or a contact with a measuring gauge.
信息:ICSCCS:L23 发布:2003-01 实施:2003-01-01

ECA EIA-364-112-2010 TP-112型电连接器、连接器和插座平行电路测试程序的接触电阻和电流分级
简介:
信息:ICSCCS发布:2010-01-01 实施

JIS C5402-2-3-2005 电子设备连接器.试验和测量.第2-3部分:电连续性和接触电阻试验.试验2c:接触电阻偏差
简介:この規格は,規定した動的条件下における電子機器用コネクタ(以下,コネクタという。)の接触抵抗の変動を決定するための試験方法について規定する。
信息:ICS:31.220.10 CCS:L23 发布:2005-03-20 实施

BS EN 60512-2-1-2002 电子设备用连接器.试验和测量.电气连续性和接触电阻试验.试验2a.接触电阻. 毫伏电压级方法
简介:This part of IEC 60512, when required by the detail specification, is used for testingelectromechanical components within the scope of IEC technical committee 48. This test mayalso be used for similar devices when specified in a detail specification.
信息:ICS:31.220.10 CCS:L23 发布:2002-09-30 实施:2002-09-30

ANSI/EIA-364-112-2010 电气连接器或插座中并联电路的接触电阻和电流额定值的测定用试验程序
简介:This procedure applies to connectors and sockets when multiple circuits are electrically connected in a parallel configuration and there is a need to determine the expected parallel resistance and or current rating
信息:ICSCCS:K31 发布:2010 实施

JIS C5402-2-6-2005 电子设备连接器.试验和测量.第2-6部分:电连续性和接触电阻试验.试验2f:外壳电连续性
简介:この規格は,電子機器用コネクタ(以下,コネクタという。)を結合したときに導通するように設計されたコネクタのハウジング(シェル)間の抵抗を測定するための試験方法について規定する。
信息:ICS:31.220.01 CCS:L23 发布:2005-03-20 实施

NF C93-400-2-3-2002 电子设备连接器.试验和测量.第2-3部分:带电连续性和接触电阻试验.试验2c:接触电阻变化量
简介:
信息:ICS:31.220.10 CCS:L23 发布:2002-07-01 实施:2002-07-05

KS C IEC 60512-2-2-2009 电子设备连接器.试验和测量.第2-2部分:电连续性和接触电阻试验.试验2b:接触电阻.规定试验电流法
简介:이 표준은 세부 명세를 요구할 때, IEC 기술 위원회 48의 업무 범위 내의 전자기기용
信息:ICS:31.220.10 CCS:L04 发布:2009-09-09 实施:2009-09-09

KS C IEC 60512-2-2004 电子设备用机电元件.基本试验规程和测量方法.第2部分:一般检查、电连续性和接触电阻试验、绝缘试验和电压应力试验
简介:이 규격에 포함된 시험은 세부 명세에 의해 요구될 때 TC 48*의 업무 범위 내에서
信息:ICS:31.220.01 CCS:L10 发布:2004-08-24 实施:2004-08-24

NF C93-400-2-1-2002 电子设备连接器.试验和测量.第2-1部分:带电连续性和接触电阻试验.试验 2a:接触电阻.毫伏电平法
简介:
信息:ICS:31.220.10 CCS:L23 发布:2002-07-01 实施:2002-07-05

ASTM B667-97(2009) 测量电接触电阻用探针的结构和使用的标准实施规程
简介:
信息:ICS:17.220.20 CCS发布:2009-04-15 实施

KS C IEC 60512-2-2004 电子设备用机电元件.基本试验规程和测量方法.第2部分:一般检查、电连续性和接触电阻试验、绝缘试验和电压应力试验
简介:이 규격에 포함된 시험은 세부 명세에 의해 요구될 때 TC 48*의 업무 범위 내에서
信息:ICS:31.220.01 CCS:L10 发布:2004-08-24 实施:2004-08-24

NF C93-400-2-6-2002 电子设备连接器.试验和测量.第2-6部分:带电连续性和接触电阻试验.试验 2f:壳体带电连续性
简介:
信息:ICS:31.220.10 CCS:L23 发布:2002-07-01 实施:2002-07-05

KS C IEC 60512-2-1-2008 电子设备连接器.试验和测量.第2-1部分:电连续性和接触电阻试验.试验2a:接触电阻.毫伏法
简介:이 표준은 IEC TC 48의 업무 범위 내에서 전자 기계적 부품에 적용한다. 이 시험은
信息:ICS:31.220.10 CCS:L23 发布:2008-11-28 实施:2008-11-28

KS C IEC 60512-2-2004(2009) 电子设备用机电元件基本试验程序和测量方法第2部分:一般检验、电气连续性和接触电阻试验、绝缘试验和电压应力试验
简介:
信息:ICS:31.220.01 CCS发布:2004-08-24 实施

BS EN 60512-2-6-2002 电子设备连接器.试验和测量.电连续性和接触电阻试验.试验2f.外壳电连续性
简介:This part of IEC 60512, when required by the detail specification, is used for testing electromechanical components within the scope of IEC technical committee 48. This test may also be used for similar devices when specified in a detail specification.The object of this test is to define a standard test method for measuring the resistance between component housings (shells) which are intended to provide electrical continuity when mated.This test is not intended to verify shielding against magnetic or r.f. interference.
信息:ICS:31.220.10 CCS:L23 发布:2002-05-24 实施:2002-05-24

我们的实力

我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力

部分实验仪器

实验仪器 实验仪器 实验仪器 实验仪器

合作客户

我们的实力

注意:因业务调整,暂不接受个人委托测试望见谅。