末端淬火检测标准

发布时间：2023-02-22 10:44:26 • 阅读量： • 来源：中析研究所

末端淬火检测标准相关信息

GB/T 225-2006 钢淬透性的末端淬火试验方法(Jominy试验)
简介： 本标准规定用末端淬火试验方法（Jominy试验）测定钢的淬透性，试验时采用直径为25mm，长为100mm的试样。
信息：ICS：77.040.99 CCS：H24 发布：2006-11-01 实施：2007-02-01

GB/T 225-1988 钢的淬透性末端淬火试验方法
简介： 本标准规定用末端淬火试验方法（简称“端淬法”或“Jominy法”）测定钢的淬透性。本标准适用于优质碳素结构钢、合金结构钢、弹簧钢、部分工模具钢、轴承钢及低淬透性结构钢；不适用于空气淬硬钢和甚低淬透性钢。
信息：ICS：77.040.30 CCS：H23 发布：1988-12-10 实施：1990-01-01

ASTM A304-2016 有末端淬火淬透性要求的合金钢棒材的标准规格
简介： 1.1x00a0;This specification covers hot-worked alloy, carbon, and carbon-boron steels in a variety of compositions and sizes, which may attain specified depth of hardening in the end quench test. These steel compositions are identified by the suffix letter x201c;Hx201d; added to the conventional grade number. 1.2x00a0;This specification provides for analyses other than those listed under Tables 1 and 2. Special hardenability limits are also permissible when approved by the purchaser and manufacturer. (A)x00a0;New designations established in accordance with Practice E527 and SAE J8201;1086, Recommended Practice for Numbering Metals and Alloys (UNS).(B)x00a0;Sulfur content range is 0.035 to 0.0508201;%.(C)x00a0;These steels can be expected to have a 0.00058201;% min boron content.(D)x00a0;Vanadium content range is 0.10 to 0.158201;%.(E)x00a0;Minimum vanadium content is 0.158201;%. (A)x00a0;Standard H Steels can be produced with a lead range of 0.15x2013;0.358201;%. Such steels are identified by inserting the letter x201c;Lx201d; between the second and third numerals of the grade designation, for example, 15L22 H. Lead is generally reported as a range of 0.15x2013;0.358201;%.(B)x00a0;New designations established in accordance with Practice E527 and SAE J8201;1086, Recommended Practice for Numbering Metals and Alloys (UNS).(C)x00a0;These steels can be expected to have 0.00058201;% min boron content. 1.3x00a0;The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
信息：ICS：77.140.60 CCS：H44 发布：2016 实施：

JIS G0561-2006 钢的淬透性试验方法(末端淬火法)
简介：この規格は，鋼の焼入性をジョミニー式一端焼入法によって測定する試験方法について規定する。
信息：ICS：77.040.99 CCS：H21 发布：2006-02-20 实施：

ASTM A304-2005(2011) 有末端淬火淬透性要求的碳和合金钢棒材的标准规范
简介：1.1 This specification covers hot-worked alloy, carbon, and carbon-boron steels in a variety of compositions and sizes, which may attain specified depth of hardening in the end quench test. These steel compositions are identified by the suffix letter x201C;Hx201D; added to the conventional grade number. 1.2 This specification provides for analyses other than those listed under Tables 1 and 2. Special hardenability limits are also permissible when approved by the purchaser and manufacturer. 1.3 The values stated in inch-pound units are to be regarded as the standard. 1.3.1 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
信息：ICS：77.140.60 (Steel bars and rods) CCS：H44 发布：2005 实施：

KS D 0206-2002 钢的淬透性末端淬火试验方法
简介：이 규격은 지름 25 mm, 길이 100 mm의 시험편을 사용하여 한쪽 끝 &53
信息：ICS：77.040.99 CCS：H21 发布：2002-05-29 实施：2002-05-29

JIS G0561-1998 钢的淬透性试验方法(末端淬火法)
简介：
信息：ICS：77.040.99 CCS：H20 发布：1998-12-20 实施：

ASTM A914/A914M-1992(2011) 对末端淬火淬透性有限制要求的钢棒材标准规范
简介：1.1 This specification covers hot-worked alloy and carbon-boron steels designed to attain restricted depth of hardening in the end-quench test. These steel compositions are identified by the suffix letter x201C;RHx201D; added to the conventional grade number. 1.2 In general, steels with restricted hardenability (RH steels) will exhibit a hardness range not greater than 5 HRC at the initial position on the end-quench hardenability bar and not greater than 65 % of the hardness range for standard H-band steels (Specification A304) in the inflection region. Generally the restricted hardenability band follows the middle of the corresponding standard H-band. An example of the RH band compared with the H band is given for Grade 4140 in Fig. 1. 1.2.1 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
信息：ICS：77.140.60 (Steel bars and rods) CCS：H44 发布：1992 实施：

AECMA PREN 2003-14-1986 航空航天系列.钢产品试验方法.第14部分:淬透性末端淬火试验方法 (JOminy 试验).P1版
简介：This draft is now available for public comment and your views and technical comments on it would be appreciated. If you have no specific comments to make hut find it generally acceptable it would be helpful if you would notify US accordingly. Suggestions entailing revision of the text should indicate the preferred wording. Please quote the relevant clause number against any comment.
信息：ICS：49.060 CCS：V11 发布：1986-04-01 实施：