表观硬度检测标准表观硬度检测标准-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

表观硬度检测标准相关信息

GB/T 39693.7-2022 硫化橡胶或热塑性橡胶硬度的测定第7部分：邵氏硬度法测定胶辊的表观硬度
简介：
信息：ICS：83.140.99 CCS：G47 发布：2022-12-30 实施：2023-04-01

EN ISO 4498-2010 不包括硬质金属的烧结金属材料.表观硬度和显微硬度的测定
简介：This International Standard specifies methods of hardness testing of sintered metal materials, excluding hardmetals.
信息：ICS：77.160 CCS：发布：2010-06-01 实施：

KS D ISO 4498-1-2001(2006) 烧结金属材料（不包括硬质合金）表观硬度的测定第1部分:截面硬度基本均匀的材料
简介：
信息：ICS： CCS：发布：2001-12-31 实施：

GB/T 39693.8-2022 硫化橡胶或热塑性橡胶硬度的测定第8部分：赵氏硬度（P&J)法测定胶辊的表观硬度
简介：
信息：ICS：83.140.99 CCS：G47 发布：2022-12-30 实施：2023-04-01

ISO 4498-2010 不包括硬质金属的烧结金属材料.表观硬度和显微硬度的测定
简介：1.1 This International Standard specifies methods of hardness testing of sintered metal materials, excluding hardmetals. 1.2 Procedure 1 determines the apparent hardness of the whole material. Procedure 1
信息：ICS：77.040.10;77.160 CCS：H22 发布：2010-06 实施：2010-06-15

HG/T 2450-1999 胶辊表观硬度的测定.橡胶国际硬度计法
简介：本标准规定了以橡胶国际硬度计测定胶辊表观硬度的试验条件、仪器及试验步骤等。本标准适用于橡胶(包括热塑性弹性体)辊的表观硬度测试，以橡胶国际硬度(IRHD)值表示。
信息：ICS：83.140.99 CCS：G47 发布：1999-08-12 实施：2000-10-01

GB/T 39693.6-2020 硫化橡胶或热塑性橡胶硬度的测定第6部分：IRHD法测定胶辊的表观硬度
简介：
信息：ICS：83.140.99 CCS：G47 发布：2020-12-14 00:00:00.0 实施：2021-11-01 00:00:00.0

KS M ISO 7267-2-2010(2015) 胶辊表观硬度的测定第2部分:肖氏硬度计法
简介：
信息：ICS：83.140.99 CCS：发布：2010-04-21 实施：

BS 7442-3.1-1998 橡胶或塑料涂层的辊子.试验方法.表观硬度测定(IRHD方法)
简介：This part of ISO 7267 specifies a method for the determination of the apparent hardness of vulcanized or thermoplastic rubber roller covers, expressed in International Rubber Hardness Degrees (IRHD). The method is similar in principle to the methods used for the determination of the hardness of rubber in ISO 48, in that it consists essentially of measuring the depth of penetration of a spherical indentor operating under a specified force. The apparatus used is similar to that described in ISO 48, having a base specifically designed for application to roller covers and similar curved surfaces.
信息：ICS：83.140.99 CCS：G40;G33 发布：1998-01-15 实施：1998-01-15

GB/T 10425-2002 烧结金属摩擦材料表观硬度的测定
简介：本标准规定了烧结金属摩擦材料及制品的表观硬度测定方法。本标准适用于烧结金属摩擦材料及摩擦层厚度不小于o．7 mm的带芯板烧结金属摩擦片表观硬度的测定。
信息：ICS：77.160 CCS：H72 发布：2002-04-09 实施：2002-10-01

KS M ISO 7267-1-2010(2015) 胶辊表观硬度的测定第1部分:IRHD法
简介：
信息：ICS：83.140.99 CCS：发布：2010-04-21 实施：

GOST 25698-1998 硬质合金以外的烧结金属材料.表观硬度的测定.大体沿截面硬度均匀的材料
简介：Настоящий стандарт устанавливает методы определения твердости спеченных металлических материалов. Стандарт распространяется на: а) спеч
信息：ICS：77.160 CCS：发布：1998 实施：2001-07-01

GB/T 9097.1-2002 烧结金属材料(不包括硬质合金)表观硬度的测定第1部分;截面硬度基本均匀的材料
简介：本标准规定了烧结金属材料(不包括硬质合金)表观硬度的测定方法。本标准适用于：a)未经热处理的烧结金属材料；b)经过热处理，但距表面至少5 mm深度之内硬度基本均匀的烧结金属材料。注：对于经过表面处理(例如表面硬化)但与b)所要求的状态不一致的烧结金属材料，其表观硬度的测定由本标准的其他部分另作规定。
信息：ICS：77.160 CCS：H72 发布：2002-04-09 实施：2002-10-01

KS M ISO 7267-1-2010 橡胶包覆滚柱.表观硬度的测定.第1部分:国际橡胶硬度标度(IRHD)法
简介：이 표준은 국제 고무 경도 등급(IRHD)으로 표시되는 가황 또는 열가소성 고무 피복 롤러
信息：ICS：83.140.99 CCS：G40 发布：2010-04-21 实施：2010-04-21

ISO 7267-1:1997 橡胶包覆辊表观硬度的测定第1部分:IRHD法
简介：
信息：ICS：83.140.99 CCS：发布：1997-05-29 实施：

GB/T 9097-2016 烧结金属材料(不包括硬质合金) 表观硬度和显微硬度的测定
简介：
信息：ICS： CCS：发布：实施：2016-06-01

BS ISO 7267-1-2008 橡胶包覆的滚柱.表观硬度的测定.国际橡胶硬度标度(IRHD)法
简介：
信息：ICS：83.140.99 CCS：G40 发布：2009-04-30 实施：2009-04-30

DS/EN 24498-1-1994 不包括硬质合金的烧结金属材料．表观硬度的测定．第1部分：截面硬度基本均匀的材料
简介：This part of ISO 4498 specifies methods of hardness testing of sintered metal materials.It applies toa) sintered materials which have not been sub-jected to heat treatment;b) sintered materials heat treated in such a way that the hardness is essentially uniform to a depth of at least 5 mm below the surface.NOTE 1 Sintered metal materials which, because of a surface treatment, for example case hardening, do not conform with requirement b) will be covered by subse-quent parts of this International Standard.
信息：ICS： CCS：发布：1994-05-09 实施：1994-05-09

DIN ISO 48-8-2021 硫化橡胶或热塑性橡胶. 硬度的测定. 第8部分: 用Pusey和Jones方法测定橡胶包覆辊的表观硬度(ISO 48-8-2018)
简介：This document specifies a method for the determination of the apparent hardness of vulcanized- or thermoplastic-rubber roller covers, expressed as the Pusey and Jones indentation value. The Pusey and Jones plastometer apparatus is used to measure the depth of indentation of an in
信息：ICS：83.140.99 CCS：G34 发布：2021-02-00 实施：

ISO 7267-1-2008 橡胶包覆的滚柱.表观硬度的测定.第1部分:国际橡胶硬度标度(IRHD)法
简介：This part of ISO 7267 specifies a method for the determination of the apparent hardness, expressed inInternational Rubber Hardness Degrees (IRHD), of vulcanized- or thermoplastic-rubber roller covers. Themethod is similar in principle to the methods used for the determination of the hardness of rubber in ISO 48 inthat it consists essentially of measuring the depth of penetration of a spherical indentor operating under aspecified force. The apparatus used is similar to that described in ISO 48, having a base specifically designedfor application to roller covers and similar curved surfaces.NOTE With some rollers, there may be significant variation in the thickness of the rubber over the surface of theroller, which could affect the measured apparent hardness.
信息：ICS：83.140.99 CCS：G40 发布：2008-08 实施：

NF A95-321-1-1993 除硬质合金以外的烧结金属材料.表观硬度的测定.第1部分:截面硬度基本均匀的材料
简介：
信息：ICS：77.160 CCS：H70 发布：1993-08-01 实施：1993-08-05

ISO 48-6:2018 硫化橡胶或热塑性橡胶硬度的测定第6部分:用IRHD法测定胶辊的表观硬度
简介：
信息：ICS：83.140.99 CCS：发布：2018-08-20 实施：

ISO 7267-1:2008 橡胶覆盖辊——表观硬度的测定第1部分:IRHD法
简介：
信息：ICS：83.140.99 CCS：发布：2008-07-21 实施：

HG/T 2450-1993 胶辊表观硬度的测定橡胶国际硬度计法
简介：
信息：ICS： CCS：化学工业部发布：1993-07-08 实施：1994-07-01

ISO 48-7:2018 硫化橡胶或热塑性橡胶硬度的测定第7部分:肖氏硬度计法测定胶辊的表观硬度
简介：
信息：ICS：83.140.99 CCS：发布：2018-08-20 实施：

ISO 7267-2:2008 橡胶覆盖辊——表观硬度的测定第2部分:肖氏硬度计法
简介：
信息：ICS：83.140.99 CCS：发布：2008-07-21 实施：

BS 7442-4.1-1992 有橡胶或塑料涂层辊子.要求.表观硬度规范
简介：Specifies requirements in terms of Shore, IRHD or P & J Values.
信息：ICS：83.140.99 CCS：G33 发布：1992-12-15 实施：1992-12-15

ISO 48-8:2018 硫化橡胶或热塑性橡胶硬度的测定第8部分:用Pusey和Jones法测定橡胶辊的表观硬度
简介：
信息：ICS：83.140.99 CCS：发布：2018-08-20 实施：

NF A95-321-2008 不包括硬质金属的烧结金属材料.表观硬度和显微硬度的测定
简介：
信息：ICS：77.040.10;77.160 CCS：H70 发布：2008-02-01 实施：2008-02-02

BS 7442 Sec.4.1-1992 橡胶或塑料包覆的滚子要求.表观硬度规范
简介：
信息：ICS： CCS：J87 发布：1992-12-15 实施：

BS ISO 7267-3-2017 橡胶涂覆滚柱.表观硬度的测定.普西-琼斯(Pusey和Jones)法
简介：
信息：ICS：83.140.99 CCS：G40 发布：2017-09-22 实施：2017-09-30

ISO 7267-3-2007 橡胶涂覆滚柱.表观硬度测定.第3部分:普西-琼斯(Pusey和Jones)法
简介：This part of ISO 7267 specifies a method for the determination of the apparent hardness of vulcanized rubberroller covers, expressed as the Pusey and Jones indentation value.The Pusey and Jones plastometer apparatus is used to measure the depth of indentation of an indentor undera specified force into the surface of the rubber. The indentation value should not be confused with hardnessas measured by the international rubber hardness test method ISO 48 [1], since in this method the rubberimmediately adjacent to the indentor is precompressed. The Pusey and Jones indentation value is an inversemeasurement of hardness, i.e. the harder the rubber the lower the Pusey and Jones indentation value.
信息：ICS：83.140.99 CCS：J62;G47 发布：2007-06 实施：

HG/T 2413.2-1992 胶辊表观硬度的测定邵尔硬度计法
简介：本标准规定了邵尔硬度计法测定胶辊表观硬度的试验条件、仪器及试验步骤等。本标准适用于在硫化胶辊上测定邵尔硬度、主要用于中级精度要求的测定。
信息：ICS：83.140.99 CCS：G47 发布：1992-10-22 实施：1993-07-01

BS ISO 7267-1-2017 橡胶包覆的滚柱.表观硬度的测定.国际橡胶硬度标度(IRHD)法
简介：
信息：ICS：83.140.99 CCS：G40 发布：2017-09-18 实施：2017-09-30

ISO 7267-3:2007 橡胶包覆辊表观硬度的测定第3部分:普西和琼斯法
简介：
信息：ICS：83.140.99 CCS：发布：2007-05-31 实施：

prEN 24498-1-1992 不包括硬质合金的烧结金属材料的表观硬度的测定.第1部分:截面硬度基本均匀的材料
简介：
信息：ICS： CCS：H22 发布：1992-09 实施：

ISO 7267-3-2017 橡胶覆盖辊 - 表观硬度的测定 - 第3部分:Pusey和Jones法
简介：
信息：ICS：83.140.99 CCS：发布：2017-08-18 实施：

DIN EN ISO 4498-2007 不包括硬质金属的烧结金属材料.表观硬度和显微硬度的测定
简介：This International Standard specifies methods of hardness testing of sintered metal materials，excludinghardmetals．1.1 Procedure 1 determines the apparent hardness of the whole materia.Procedure 1- applies to sintered meta materials which have either not been subjected to any heat treatment，or which have been heat treated in such a way that the hardness is essentially unifOrm to a depth of at least 5 mm below the surface, - applies to the surfaces of sintered metal materials which have been treated in such a way that thehardness is not uniform in the section to a depth of 5 mm below the surface，- therefore applies to materials in which the hardness is obtained essentially by surface enrichment by carbon，or by carbon and nitrogen(for example，and by carburising，carbonitriding，nitrOcarburIsing orsulphidising)，and- applies to materials which have been induction hardened.1.2 Procedure 2 determines the microhardness of the metal phase.
信息：ICS：77.160 CCS：H72 发布：2007-05 实施：

ISO 4498-1:1990 烧结金属材料不包括硬质合金.表观硬度的测定.第1部分:截面硬度基本均匀的材料
简介：
信息：ICS：77.040.10 CCS：发布：1990-08-23 实施：

ISO 7267-1-2017 橡胶覆盖辊 - 表观硬度的测定 - 第1部分:IRHD法
简介：
信息：ICS：83.140.99 CCS：发布：2017-08-18 实施：

BS EN ISO 4498-2007 不包括硬质金属的烧结金属材料.表观硬度和显微硬度的测定
简介：This International Standard specifies methods of hardness testing of sintered metal materials, excluding hardmetals. 1 Procedure 1 determines the apparent hardness of the whole material. Procedure 1 — applies to sintered metal materials which have either not been subjected to any heat treatment, or which have been heat treated in such a way that the hardness is essentially uniform to a depth of at least 5 mm below the surface, — applies to the surfaces of sintered metal materials which have been treated in such a way that the hardness is not uniform in the section to a depth of 5 mm below the surface, — therefore applies to materials in which the hardness is obtained essentially by surface enrichment by carbon, or by carbon and nitrogen (for example, and by carburising, carbonitriding, nitrocarburising or sulphidising), and — applies to materials which have been induction hardened. 2 Procedure 2 determines the microhardness of the metal phase. Procedure 2 — applies to all types of sintered metal materials. — is used, in particular, to determine the hardness profile of case-hardened or carbonitrided materials according to the method described in ISO 4507. — also applies to any sintered metallic materials which have been subjected to surface treatments such as electrodeposited plating, chemical coating, chemical vapour deposition (CVD), physical vapour deposition (PVD), laser, ion bombardment, etc. To determine the microhardness of treated surfaces, Procedure 2 applies. NOTE However, it should be noted that international agreement has not yet been reached on a number of factors involved in microhardness testing. Nevertheless, the parameters defined in Procedure 2 are important enough to enable a considerable measure of standardisation of extensively used practices.
信息：ICS：77.040.10;77.160 CCS：H21;H22 发布：2007-03-30 实施：2007-03-30

ISO 4498-1-1990 烧结金属材料,不包括硬质金属表观硬度的测定第1部分:截面硬度基本均匀的材料
简介：
信息：ICS：77.160 CCS：H22 发布：1990-08 实施：1990-08-01

BS ISO 7267-3-2011 橡胶涂覆滚柱.表观硬度的测定.普西-琼斯(Pusey和Jones)法
简介：
信息：ICS：83.140.99 CCS：G40 发布：2011-11-30 实施：2011-11-30

EN ISO 4498-2007 不包括硬质金属的烧结金属材料.表观硬度和显微硬度的测定［代替:CEN EN 24498-1］
简介：
信息：ICS： CCS：发布：2007-02-01 实施：

HB 5441.9-1989 粉末冶金制品和粉末的性能测试.烧结金属材料（硬质合金除外）表观硬度的测定
简介：本标准适用于除硬质合金以外的烧结金属材料硬度的测定，包括未经热处理的材料和虽经热处理，但其硬度值至少从表面至5mm深处基本是均匀的材料。
信息：ICS： CCS：H70 发布：1990-04-11 实施：1990-06-01

ISO 7267-3:2011 橡胶覆盖辊——表观硬度的测定第3部分:普西-琼斯法
简介：
信息：ICS：83.140.99 CCS：发布：2011-11-04 实施：

DIN ISO 4498-2005 不包括硬质金属的烧结金属材料.表观硬度和显微硬度的测定
简介：This International Standard specifies methods of hardness testing of sintered metal materials, excludinghardmetals.1.1 Procedure 1 determines the apparent hardness of the whole material.Procedure 1 applies to sintered metal materials which have either not been subjected to any heat treatment, or which have been heat treated in such a way that the hardness is essentially uniform to a depth of at least 5 mm below the surface,-- applies to the surfaces of sintered metal materials which have been treated in such a way that the hardness is not uniform in the section to a depth of 5 mm below the surface, therefore applies to materials in which the hardness is obtained essentially by surface enrichment by carbon, or by carbon and nitrogen (for example, and by carburising, carbonitriding, nitrocarburising or sulphidising), and-- applies to materials which have been induction hardened.1.2 Procedure 2 determines the microhardness of the metal phase.Procedure 2-- applies to all types of sintered metal materials.-- is used, in particular, to determine the hardness profile of case-hardened or carbonitrided materials according to the method described in ISO 4507.-- also applies to any sintered metallic materials which have been subjected to surface treatments such as electrodeposited plating, chemical coating, chemical vapour deposition (CVD), physical vapour deposition (PVD), laser, ion bombardment, etc. To determine the microhardness of treated surfaces, Procedure 2 applies.NOTE However, it should be noted that international agreement has not yet been reached on a number of factorsinvolved in microhardness testing. Nevertheless, the parameters defined in Procedure 2 are important enough to enable aconsiderable measure of standardisation of extensively used practices.
信息：ICS：77.160 CCS：H22 发布：2005-11 实施：

ISO 7267-3:1988 橡胶包覆辊表观硬度的测定第3部分:普西和琼斯法
简介：
信息：ICS：83.140.99 CCS：发布：1988-03-17 实施：

DIN EN ISO 4498-2010 不包括硬质金属的烧结金属材料.表观硬度和显微硬度的测定(ISO 4498-2010).德文版本EN ISO 4498-2010
简介：
信息：ICS：77.160 CCS：H71 发布：2010-11 实施：

ISO 4498:2005 烧结金属材料不包括硬质合金.表观硬度和显微硬度的测定
简介：
信息：ICS：77.040.10 CCS：发布：2005-06-13 实施：

JUS C.A4.055-1987 金属的机械试验．烧结金属材料（不包括硬质合金）表观硬度的测定．表面渗碳或渗碳和氮的表面硬化黑色金属材料
简介：
信息：ICS： CCS：发布：1987-01-01 实施：

KS D ISO 4498-2010 不包括硬质金属的烧结金属材料.表观硬度和显微硬度的测定
简介：이 표준은 초경합금을 제외한 소결 금속 재료의 경도 시험방법에 대하여 규정한다.
信息：ICS：77.040.10 CCS：H22 发布：2010-10-27 实施：2010-10-27

ISO 4498-2005 不包括硬质金属的烧结金属材料.表观硬度和显微硬度的测定
简介：This International Standard specifies methods of hardness testing of sintered metal materials, excluding hardmetals.1 Procedure 1 determines the apparent hardness of the whole material.Procedure 1— applies to sintered metal materials which have either not been subjected to any heat treatment, or which have been heat treated in such a way that the hardness is essentially uniform to a depth of at least 5 mm below the surface,— applies to the surfaces of sintered metal materials which have been treated in such a way that the hardness is not uniform in the section to a depth of 5 mm below the surface,— therefore applies to materials in which the hardness is obtained essentially by surface enrichment by carbon, or by carbon and nitrogen (for example, and by carburising, carbonitriding, nitrocarburising or sulphidising), and— applies to materials which have been induction hardened.2 Procedure 2 determines the microhardness of the metal phase.Procedure 2— applies to all types of sintered metal materials.— is used, in particular, to determine the hardness profile of case-hardened or carbonitrided materials according to the method described in ISO 4507.— also applies to any sintered metallic materials which have been subjected to surface treatments such as electrodeposited plating, chemical coating, chemical vapour deposition (CVD), physical vapour deposition (PVD), laser, ion bombardment, etc. To determine the microhardness of treated surfaces, Procedure 2 applies.NOTE However, it should be noted that international agreement has not yet been reached on a number of factors involved in microhardness testing. Nevertheless, the parameters defined in Procedure 2 are important enough to enable a considerable measure of standardisation of extensively used practices.
信息：ICS：77.040.10;77.160 CCS：H22 发布：2005-06 实施：

DS/ISO 7267/2-1987 橡胶包覆的辊筒. 表观硬度的测定.第2部分: 肖氏(SHORE)硬度计法
简介：This part of ISO 7267 specifies a method for the determination of the apparent hardness of vulcanized rubber roller covers, expressed in Shore hardness, for measurement where only medium precision is required. The method and apparatus used are essentially those described in ISO 7619, the measurements in this case being made on the curved surface of the conditioned rubber covered roller rather than on a flat test piece. Shore-type A and D instruments are specified, the latter being used for measurements on rollers of high hardness.
信息：ICS：828 CCS：发布：1987 实施：

NF A95-321-2010 不包括硬质金属的烧结金属材料.表观硬度和显微硬度的测定
简介：
信息：ICS：77.040.10;77.160 CCS：H16 发布：2010-08-01 实施：2010-08-28

NP ISO 7267-3-2001 橡胶涂覆滚柱．表观硬度测定．第3部分：普西-琼斯（Pusey和Jones）法
简介：A presente parte desta Norma especifica um método para determinar a dureza aparente dos revestimentos de borracha vulcanizada dos rolos, expressa como o valor de penetra??o de Pusey e Jones. Utiliza-se o plastómetro de Pusey e Jones para medir a profundidade de penetra??o de um penetrador na superfície da borracha sob uma for?a especificada. O valor de penetra??o n?o deve ser confundido com a dureza medida pelos métodos de ensaio da dureza da borracha ISO 48°, ISO 1400" e ISO 1818°, visto que, nestes métodos, a borracha na vizinhan?a imediata do penetrador está pré-comprimida. O valor de penetra??o de Pusey e Jones é uma medida inversa da dureza, isto é, quanto mais dura for a borracha, menor será o valor de penetra??o de Pusey e Jones.
信息：ICS：83.140.99 CCS：发布：2002-06 实施：2002-06

DS/ISO 7267/1-1987 橡胶包覆的辊筒. 表观硬度的测定.第1部分: 国际橡胶硬度标度(IRHD)法
简介：This part of ISO 7267 specifies a method for the determination of the apparent hardness of vulcanized rubber roller covers, expressed in international rubber hardness degrees (IRHD). The method is similar in principle to the methods used for the determination of the hardness of rubber vulcanizates in ISO 48, ISO 1400 and ISO 1818 in that it consists essentially of measuring the depth of penetration of a spherical indentor operating under a specified force. The apparatus used is similar to that described in ISO 48, ISO 1400 and ISO 1818, differing only in that the base is designed specifically for application to roller covers and similar curved surfaces.
信息：ICS：828 CCS：发布：1987 实施：

ISO 4498:2010 烧结金属材料不包括硬质合金和粉煤灰；表观硬度和显微硬度的测定
简介：
信息：ICS：77.040.10 CCS：发布：2010-06-09 实施：

KS D ISO 4498-2-2001(2006) 烧结金属材料不包括硬质合金 - 表观硬度的测定 - 第2部分:表面硬化的铁基材料由碳或碳和氮富集的表面
简介：
信息：ICS： CCS：发布：2001-12-31 实施：

ISO 7267-2:1986 橡胶包覆辊表观硬度的测定第2部分:肖氏硬度计法
简介：
信息：ICS：83.140.99 CCS：发布：1986-07-03 实施：