钛合金焊丝检测标准钛合金焊丝-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

钛合金焊丝相关标准参考信息

GB/T 41110-2021 镍及镍合金药芯焊丝
简介：
信息：ICS：25.160.20 CCS：J33 发布：2021-12-31 00:00:00.0 实施：2022-07-01 00:00:00.0

DIN EN 2402-2014 航空航天系列. 耐热镍基合金NiCr20Co3Fe3. 退火. 焊丝. 直径小于等于10 mm; 德文版本和英文版本EN 2402-2014
简介：
信息：ICS：49.025.15 CCS：V11 发布：2014-07-01 实施：

ISO 24034-2010 焊接耗材.钛和钛合金的熔焊用焊丝和焊条.分类
简介：This International Standard specifies requirements for the classification of solid wire electrodes, solid wiresand rods for fusion welding of titanium and titanium alloys. The classification is based on their chemicalcomposition.The compositions of solid wire electrodes for metal inert gas (MIG) welding are the same as solid wireelectrodes, solid wires and rods for tungsten inert gas (TIG) arc welding, plasma arc welding, laser beamwelding, and other fusion welding processes.
信息：ICS：25.160.20 CCS：J33 发布：2010-10-01 实施：2010-10-01

GB/T 37612-2019 耐蚀合金焊丝
简介：
信息：ICS：77.140.99;77.140.65 CCS：H59 发布：2019-06-04 00:00:00.0 实施：2020-05-01 00:00:00.0

JIS Z3335-2014 电弧焊用镍和镍合金药芯焊丝
简介：
信息：ICS：25.160.20 CCS：J33 发布：2014-06-20 实施：

ISO 24034:2010 焊接耗材——钛及钛合金熔焊用实心焊丝、实心焊丝和焊条——分类
简介：
信息：ICS：25.160.20 CCS：发布：2010-09-29 实施：

GB/T 37609-2019 耐蚀合金焊带和焊丝通用技术条件
简介：
信息：ICS：77.140.99;77.140.65 CCS：H59 发布：2019-06-04 00:00:00.0 实施：2020-05-01 00:00:00.0

JIS Z3335-2014 电弧焊用镍和镍合金药芯焊丝
简介：
信息：ICS：25.160.20 CCS：J33 发布：2014-06-20 实施：

EN ISO 24034-2010 焊接消耗品.钛和钛合金熔焊用实芯焊丝和焊条.分类
简介：This International Standard specifies requirements for the classification of solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys. The classification is based on their chemical composition.The compositions of solid wire electrodes for metal inert gas (MIG) welding are the same as solid wire electrodes, solid wires and rods for tungsten inert gas (TIG) arc welding, plasma arc welding, laser beam welding, and other fusion welding processes.
信息：ICS：25.160.20 CCS：发布：2010 实施：

GB/T 35365-2017 潜水器用钛合金焊丝
简介：
信息：ICS：77.150 CCS：H64 发布：2017-12-29 00:00:00.0 实施：2018-07-01 00:00:00.0

BS EN 2402-2014 航空航天系列. 耐热镍基合金NiCr20Co3Fe3. 退火. 焊丝. 直径小于等于10毫米
简介：
信息：ICS：49.025.15 CCS：V11 发布：2014-05-31 实施：2014-05-31

EN ISO 18274-2010 焊接耗材.镍和镍合金熔焊用丝状和杆状电极,焊丝和焊条.分类
简介：This International Standard specifies requirements for classification of solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. The classification of the solid wire electrodes, solid strip electrodes, solid wires and solid rods is based on their chemical composition
信息：ICS：25.160.20 CCS：发布：2010 实施：

GB/T 30562-2014 钛及钛合金焊丝
简介：本标准规定了钛及钛合金实心焊丝和填充丝的型号、技术要求、试验方法、检验规则、包装、标志和质量证明。本标准适用于熔化极惰性气体保护电弧焊(MIG)、钨极惰性气体保护电弧焊(TIG)、等离子弧焊和激光焊等焊接用钛及钛合金实心焊丝和填充丝(以下简称焊丝)。
信息：ICS：25.160.20 CCS：J33 发布：2014-05-06 实施：2014-12-01

SAE AMS 5836C-2009 耐腐蚀和耐热镍合金72Ni-3.0Mn-20Cr-2.5Cb(Nb)焊丝
简介：This specification covers a corrosion and heat resistant nickel alloy in the form of welding wire. This wire has been used typically as filler metal for gas-tungsten-arc or gas-metal-arc welding of parts fabricated from high nickel alloys or combinations of such alloys and corrosion-resistant or plain-carbon steels, but usage is not limited to such applications.
信息：ICS：49.025.99 CCS：V11;J33 发布：2009-10-23 实施：

GB/T 15620-2008 镍及镍合金焊丝
简介：本标准规定了镍及镍合金实心焊丝和填充丝分类和型号、技术要求、试验方法、检验规则、包装、标志和品质证明书。本标准适用于溶化极气体保护电弧焊、钨极气体保护电弧焊、气焊及等离子弧焊等焊接用镍及镍合金实心焊丝和填充丝（以下简称焊丝）。
信息：ICS：25.160.20 CCS：J33 发布：2008-06-26 实施：2009-01-01

YS/T 887-2013 锆及锆合金焊丝
简介：本标准规定了锆及锆合金焊丝的要求、试验方法、检验规则、标志、包装、运输、贮存和质量证明书以及合同(或订货单)内容、本标准适用于冷拉方法生产的锆及锆合金焊丝、
信息：ICS：77.150 CCS：H63 发布：2013-04-25 实施：2013-09-01

SAE AMS 5778H-2009 72Ni-15.5Cr-1.0Cb-2.4Ti-0.70Al-7.0Fe耐热耐腐蚀镍合金焊丝
简介：This specification covers a corrosion and heat resistant nickel alloy in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc or gas-tungsten-arc welding of parts fabricated from alloys of similar composition, but usage is not limited to such applications.
信息：ICS：49.025.99 CCS：V11 发布：2009-09-02 实施：

GB/T 15620-1995 镍及镍合金焊丝
简介：本标准规定了镍及镍合金焊丝（包括镍含量超过其他任一元素含量的焊丝）的型号分类、技术要求、试验方法、检验规则及缠绕、包装等项内容。本标准适用于气体保护电弧焊、钨极氩弧焊、等离子弧焊、埋弧焊用的镍及镍合金焊丝（以下简称焊丝）。
信息：ICS：25.160.20 CCS：J33 发布：1995-07-12 实施：1996-05-01

SAE AMS 4954J-2012 6Al 4V钛合金焊丝
简介：This specification covers a titanium alloy in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc and gas-tungsten-arc welding of titanium with chemistry matched to weld standard grade Ti 6Al-4V alloy, but usage is not limited to such applications.
信息：ICS：25.160.20;49.025.30 CCS：发布：2012-10-25 实施：

JIS Z3331 AMD 1-2009 钛及钛合金弧焊条及实心焊丝(修改件1)
简介：This translation has been made based on the Amendment to the origi-nal Japanese Industrial Standard revised by the Minister of Economy,Trade and Industry through deliberations at the Japanese IndustrialStandards Committee as the result of proposal for revision of JapaneseIndustrial Standard with the draft being attached, based on the provi-sion of Article 12 Clause 1 of the Industrial Standardization Law ap-plicable to the case of revision by the provision of Article 14.Consequently, JIS Z 3331:2002 is partially replaced with this Amend-ment.
信息：ICS：25.160.20;77.150.50 CCS：J33 发布：2009-02-20 实施：2009-02-20

KS B ISO 24034-2022 焊接耗材.钛和钛合金熔焊用实心焊丝、实心焊丝和焊条.分类
简介：
信息：ICS：25.160.20 CCS：发布：2022-10-04 实施：

SAE AMS 4955G-2012 8Al 1Mo 1V钛合金焊丝
简介：This specification covers a titanium alloy in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc and gas-tungsten-arc welding of titanium alloys, but usage is not limited to such applications.
信息：ICS：25.160.20;49.025.30 CCS：J33;V11 发布：2012-04-05 实施：

SAE AMS 5778G-2009 72Ni 15.5Cr 1.0Cb 2.4Ti 0.70Al 7.0Fe焊丝耐腐蚀和热的镍合金
简介：This specification covers a corrosion and heat resistant nickel alloy in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc or gas-tungsten-arc welding of parts fabricated from alloys of similar composition, but usage is not limited to such applications.
信息：ICS：49.025.99 CCS：发布：2009-02-16 实施：

T/CNEA 102.11-2021 压水堆承压部件焊接第11部分：镍基合金焊丝
简介：本文件是T/CNEA102《压水堆承压部件焊接》的第11部分。本文件共计8章，其中，1-3章为规范性条款，4-8章为压水堆承压部件焊接第11部分：镍基合金焊丝主要内容。主要内容包括：型号、技术要求、试验方法、检验规则和包装、标志和质量证明文件。
信息：ICS：27.120.20 CCS：D441 发布：2021-06-04 实施：2022-03-15

NB/T 20009.8-2012 压水堆核电厂用焊接材料.第8部分：1、2、3 级设备用镍基合金焊丝和填充丝
简介：本部分规定了压水堆核电厂1、2、3级设备用镍基合金焊丝和填充丝（以下简称焊丝）的型号、技术要求、试验方法及检验规则等内容。本部分适用于压水堆核电厂1、2、3级设备钨极气体保护电弧焊（GTAW）用镍基合金焊丝。
信息：ICS：25.160.20 CCS：J33 发布：2012-01-06 实施：2012-04-06

SAE AMS 5675G-2009 70Ni 2.4Mn 15.5Cr 3.0Ti 7.0Fe耐腐蚀和热的镍合金焊丝
简介：This specification covers a corrosion and heat resistant nickel alloy in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc or gas-tungsten-arc welding of parts fabricated from alloys of dissimilar composition, but usage is not limited to such application.
信息：ICS：49.025.99 CCS：V11 发布：2009-02-06 实施：

DIN EN ISO 24034-2020 焊接耗材. 钛和钛合金熔焊用实心焊条、实心焊丝和焊条. 分类(ISO 24034-2020); 德文版 EN ISO 24034-2020
简介：This document specifies requirements for classification of solid wire electrodes, solid wires and rods for arc welding of titanium and titanium alloys. The classification is based on their chemical composition.
信息：ICS：25.160.20 CCS：J33 发布：2020-12-01 实施：

SAE AMS 4953F-2011 含5Al-2.5Sn退火的钛合金焊丝
简介：This specification covers a titanium alloy in the form of welding wire. This wire has been used typically for gas-metal-arc and gas-tungsten-arc welding, but usage is not limited to such applications.
信息：ICS：25.160.20;49.025.30 CCS：J33 发布：2011-09-13 实施：

DIN EN ISO 24034-2008 焊接消耗品.钛和钛合金熔焊用实芯焊丝和焊条.分类(ISO 24034:2005+Amd 1:2008)
简介：This International Standard specifies requirements for the classification of solid wires and rods for fusionwelding of titanium and titanium alloys. The classification of the solid wires and rods is based on theirchemical composition.For titanium-welding consumables, the compositions of the wire electrodes for the MIG process (metal inertgas welding) are the same as for the TIG process (tungsten inert-gas arc welding), the plasma arc process,the laser beam process, and other fusion welding processes. Therefore, the use of the word "wires/rods" inthis classification refers to both "wire electrodes" and "wires and rods" in this International Standard.NOTE In this International Standard, the word "titanium" is used for "titanium and titanium alloys".The classification of titanium wires/rods is based upon the chemical composition of the wires/rods.
信息：ICS：25.160.20 CCS：J33 发布：2008-10 实施：

JIS Z3334-2017 镍及镍合金焊接用棒、实心焊丝和条状电极
简介：
信息：ICS：25.160.20 CCS：J33 发布：2017-04-20 实施：

SAE AMS 4952E-2011 含6Al-2Sn-4Zr-2Mo的钛合金焊丝
简介：This specification covers a titanium alloy in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc and gas-tungsten-arc welding, but usage is not limited to such applications.
信息：ICS：25.160.20;49.025.30 CCS：J33 发布：2011-09-13 实施：

NF A81-372/A1-2008 焊接消耗品.钛和钛合金的熔焊用实芯焊丝和焊条.分类.修改件1
简介：
信息：ICS：25.160.20 CCS：J33 发布：2008-08-01 实施：2008-08-16

KS B ISO 24034-2016(2021) 焊接耗材－钛及钛合金熔焊用实心焊丝和焊条－分类
简介：
信息：ICS：25.160.20 CCS：发布：2016-12-28 实施：

NB/T 47018.7-2011 承压设备用焊接材料订货技术条件第 7 部分：钛及钛合金焊丝和填充丝
简介：NB/T 47018的本部分规定了钛及钛合金焊丝和填充丝的牌号编制、技术要求、试验方法及检验规则。本部分适用于承压设备钨极气体保护焊、熔化极气体保护焊和等离子弧焊用钛及钛合金焊丝和填充丝。
信息：ICS：25.160.10 CCS：J33 发布：2011-07-01 实施：2011-10-01

SAE AMS 4244B-2008 焊接A206.0型合金用4.6Cu 0.35Mn 0.25Mg 0.22Ti铝合金焊丝
简介：1.1 FormThis specification covers an aluminum alloy in the form of two types of welding wire.1.2 ApplicationThis wire has been used typically as filler metal for gas-metal-arc and gas-tungsten-arc welding of aluminum alloycastings having similar composition (206.0 and A206.0) and requiring response to heat treatment, properties, andcorrosion resistance in the weld zone comparable to those of the castings, but usage is not limited to such applications.1.3 ClassificationWire supplied to this specification is classified as follows:Type 1 - As Extruded and SizedType 2 - As Drawn1.3.1 Unless a specific type is ordered, either type may be supplied.
信息：ICS：25.160.20;49.025.20 CCS：V11 发布：2008-07-15 实施：

DIN EN ISO 14171-2016 焊接消耗品.非合金和细粒钢埋弧焊用实芯焊丝,实芯焊丝和药芯焊丝混合助熔剂.分类(ISO 14171-2016).德文版本EN ISO 14171-2016
简介：
信息：ICS：25.160.20 CCS：J33 发布：2016-12 实施：

DIN EN ISO 18274-2011 焊接耗材.镍和镍合金熔焊用实心焊丝、,实心带状焊条,实心线材和实心棒材.分类(ISO 18274-2010);德文版本EN ISO 18274-2010
简介：This International Standard specifies requirements for classification of solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. The classification of the solid wire electrodes, solid strip electrodes, solid wires and solid rods is based on their chemical composition.
信息：ICS：25.160.20 CCS：J33 发布：2011-04 实施：

ISO 24034-2005/Amd 1-2008 焊接耗材.钛和钛合金熔焊用实心焊丝和焊条.分类.修改件1:
简介：
信息：ICS：25.160.20 CCS：发布：2008-06-09 实施：

EN ISO 636-2015 焊接消耗品.非合金和细的钨极惰性气体保护用焊条,焊丝和镀层.非晶钢.分类(ISO 636:2015)
简介：Diese Internationale Norm legt Anforderungen zur Einteilung von Stäben und Drähten zum Wolfram-Inert- gas-Schweißen von unlegierten Stählen und Feinkornstählen mit einer Mindeststreckgrenze bis 500 MPa oder einer Mindestzugfestigkeit bis 570 MPa im Schweißzustand und nach einer Wärmenachbehandlung fest. Diese Internationale Norm enthält eine gemeinsame Spezifikation zur Einteilung entweder nach der Streck- grenze und der mittleren Kerbschlagarbeit von 47 J des reinen Schweißgutes oder nach der Zugfestigkeit und der mittleren Kerbschlagarbeit von 27 J des reinen Schweißgutes. a) Abschnitte und Tabellen, die durch ein nachgestelltes "A" gekennzeichnet sind, können nur für Stäbe und Drähte angewendet werden, die nach der Streckgrenze und der mittleren Kerbschlagarbeit von 47 J des reinen Schweißgutes nach dieser Internationalen Norm eingeteilt werden. b) Abschnitte und Tabellen, die durch ein nachgestelltes "B" gekennzeichnet sind, können nur für Stäbe und Drähte angewendet werden, die nach der Zugfestigkeit und der mittleren Kerbschlagarbeit von 27 J des reinen Schweißgutes nach dieser Internationalen Norm eingeteilt werden. c) Abschnitte und Tabellen ohne nachgestelltes "A" oder "B" sind für alle nach dieser Internationalen Norm eingeteilten Stäbe und Drähte anwendbar.
信息：ICS：25.160.20 CCS：J33 发布：2015-12 实施：

JIS Z3331-2011 钛和钛合金的熔焊用焊条和实心焊丝
简介：
信息：ICS：25.160.20;77.150.50 CCS：J33 发布：2011-03-22 实施：

ISO 24034 AMD 1-2008 焊接消耗品.钛和钛合金的熔焊用实心焊丝和焊条.分类.修改件1
简介：ISO (the international Organization for Standardization) is a worldwide federation of national standards bodies(ISO member bodies). The work of preparing International Standards is normally carried out through ISOtechnical committees. Each member body interested in a subject for which a technical committee has beenestablished has the right to be represented on that committee. International organizations, governmental andnon-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with theInternational Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standardsadopted by the technical committees are circulated to the member bodies for voting. Publication as anInternational Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patentrights. ISO shall not be held responsible for identifying any or all such patent rights.Amendment 1 to ISO 24034:2005 was prepared by Technical Committee ISO/TC 44, Welding and alliedprocesses, Subcommittee SC 3, Welding consumables.
信息：ICS：25.160.20 CCS：J33 发布：2008-06 实施：

DIN EN 61189-5-4-2015 电气材料, 印刷电路板和其它互联结构和组件的试验方法. 第5-4部分: 材料和组件的通用试验方法. 印刷电路板组件的焊接合金和带焊剂与不带焊剂的实心焊丝 (IEC 61189-5-4-2015); 德文版本EN 61189-5-4-2015
简介：
信息：ICS：31.180 CCS：发布：2015-11 实施：

JIS Z3334-2011 焊接用镍和镍合金焊棒,实心焊丝和条状电极
简介：
信息：ICS：25.160.20 CCS：J33 发布：2011-03-22 实施：

SAE AMS 4954H-2008 6Al 4V钛合金焊丝
简介：This specification covers a titanium alloy in the form of wire for welding filler metal.This wire has been used typically as filler metal for gas-metal-arc and gas-tungsten-arc welding of titanium with chemistry matched to weld standard grade Ti 6Al-4V alloy, but usage is not limited to such applications.
信息：ICS：25.160.20;49.025.30 CCS：V11;J33 发布：2008-02-01 实施：

NB/T 20009.28-2015 压水堆核电厂用焊接材料第28部分:安全级设备用镍基合金焊丝
简介：本部分规定了非能动压水堆核电厂安全级设备气体保护焊用镍基合金焊丝的型号、技术要求、试验方法、检验规则、包装、标志和质量证明文件。本部分适用于非能动压水堆核电厂安全级设备气体保护焊用镍基合金焊丝。
信息：ICS：27.120.20 CCS：F69 发布：2015-07-01 实施：2015-12-01

BS EN ISO 18274-2010 焊接耗材.镍和镍合金熔焊用丝状和杆状电极,焊丝和焊条.分类
简介：
信息：ICS：25.160.20 CCS：J33 发布：2011-01-31 实施：2011-01-31

SAE AMS 4956E-2008 超低时间间隔环境控制包装的6A1 4V钛合金焊丝
简介：This specification covers a titanium alloy in the form of wire for welding filler metal.This wire has been used typically as filler metal for gas-tungsten-arc welding with chemistry matched to weld lowinterstitial grade Ti 6Al-4V ELI (UNS R56401) intended for cryogenic or elevated temperature applications, but usage isnot limited to such applications. It is particularly intended for use with equipment providing continuous inert gas shieldingof the wire as it passes from the dispenser to the welding arc, where high reliability of joints is required.
信息：ICS：25.160.20;49.025.30 CCS：发布：2008-02-01 实施：

NF L10-594-2014 航空航天系列. NiCr20Co3Fe3型耐热镍基合金. 退火. 焊丝. D ≤ 10 mm
简介：Cette Norme européenne spécifie les exigences relatives à :Alliage résistant à chaud à base de nickel NiCr20Co3Fe3RecuitFilD < ou = à 10 mmpour les applications aérospatiales.
信息：ICS：49.025.15 CCS：发布：2014-12-26 实施：2014-12-26

DIN EN ISO 14171-2011 焊接消耗品.非合金和细粒钢埋弧焊用实芯焊丝,实芯焊丝和药芯焊丝混合助熔剂.分类(ISO 14171-2010);德文版本EN ISO 14171-2010
简介：
信息：ICS：25.160.20 CCS：J33 发布：2011-01 实施：

SAE AMS 4955F-2008 8Al 1Mo 1V钛合金焊丝
简介：This specification covers a titanium alloy in the form of welding wire. This wire has been used typically as filler metal for gas-metal-arc and gas-tungsten-arc welding of titanium alloys, but usage is not limited to such applications.
信息：ICS：25.160.20;49.025.30 CCS：J33;V11 发布：2008-01-01 实施：

KS B ISO 18274-2014 焊接材料.镍和镍合金电弧焊用焊丝和条式电极、金属线和棒材.分类
简介：
信息：ICS：25.160.20 CCS：J64 发布：2014-12-26 实施：2014/12/26

ISO 18274-2010 焊接耗材.镍和镍合金熔焊用实心焊丝,实心带状焊条,实心线材和实心棒材.分类
简介：This International Standard specifies requirements for classification of solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. The classification of the solid wire electrodes, solid strip electrodes, solid wires and solid rods is based on their chemical composition.
信息：ICS：25.160.20 CCS：J33 发布：2010-12-15 实施：2010-12-15

SAE AMS 4953E-2007 5Al 2.5Sn钛合金焊丝
简介：This specification covers a titanium alloy in the form of welding wire. This wire has been used typically for gas-metal-arc and gas-tungsten-arc welding, but usage is not limited to such applications.
信息：ICS：25.160.20;49.025.30 CCS：V11 发布：2007-11-20 实施：

NF A81-372-2010 焊接耗材.钛和钛合金的熔焊用焊丝和焊条.分类.
简介：
信息：ICS：25.160.20 CCS：J33 发布：2010-12-01 实施：2010-12-24

SAE AMS 5830C-2007 12.5Cr 42.5Ni 6.0Mo 2.7Ti 0.015B 35Fe耐腐蚀和耐高温镍铁合金的焊丝
简介：This specification covers a corrosion and heat resistant nickel-iron alloy in the form of welding wire. This wire has been used typically as filler metal for electron beam, gas-tungsten-arc, or gas-metal-arc weld buildup of alloys of similar composition, but usage is not limited to such applications.
信息：ICS：49.025.99 CCS：V11 发布：2007-04-01 实施：

YB/T 5263-2014 耐蚀合金焊丝
简介：本标准规定了镍基、铁镍基耐蚀合金焊丝的订货内容、尺寸、外形、技术要求、试验方法、检验规则、包装、标志和质量证明书等。本标准适用于在腐蚀性介质中使用的镍基、铁镍基耐蚀合金焊丝。
信息：ICS：77.140.99 CCS：H59 发布：2014-10-14 实施：2015-04-01

BS EN ISO 24034-2010 焊接消耗品.钛和钛合金的熔焊用焊丝和焊条.分类
简介：This International Standard specifies requirements for the classification of solid wire electrodes, solid wiresand rods for fusion welding of titanium and titanium alloys. The classification is based on their chemicalcomposition.The compositions of solid wire electrodes for metal inert gas (MIG) welding are the same as solid wireelectrodes, solid wires and rods for tungsten inert gas (TIG) arc welding, plasma arc welding, laser beamwelding, and other fusion welding processes.
信息：ICS：25.160.20 CCS：J33 发布：2010-10-31 实施：2010-10-31

JIS Z3334 AMD 1-2007 电弧焊用镍和镍合金焊条和实心焊丝(修改件1)
简介：This translation has been made based on the Amendment to the original Japanese Industrial Standard revised by the Minister of Economy,Trade and Industry through deliberations at the Japanese Industrial Standards Committee in accordance with the Industrial Standardization Law. Consequently,JIS Z3334-1999 is partically replaced with this Amendment.
信息：ICS：25.160.20 CCS：J33 发布：2007-03-20 实施：