橄榄油的酸值检测标准橄榄油的酸值-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

橄榄油的酸值相关标准参考信息

GB/T 28552-2012 变压器油、汽轮机油酸值测定法（BTB法）
简介：本标准规定了变压器油、汽轮机油酸值的测定方法。本标准适用于变压器油、汽轮机油酸值的测定。磷酸酯抗燃油的酸值测定可参照使用本方法。
信息：ICS：75.100 CCS：E38 发布：2012-06-29 实施：2012-11-01

KS C IEC 60811-5-1-2006 电缆绝缘和护套材料的通用试验方法.第5部分:填充复合物的专用方法.第1节:滴点、油分离、较低温脆性、总酸值、无腐蚀性成分.在23℃时的电容率、在23℃和100℃时的直流电阻率
简介：이 규격은 선박 해양용으로 사용되는 케이블, 배전용 및 전기 통신용 전기 케이블과 광 케이
信息：ICS：29.060.20;29.035.20 CCS：K13 发布：2006-11-03 实施：2006-11-03

BS EN ISO 660-1996 动植物脂肪和油.酸值和酸度的测定
简介：
信息：ICS：67.200.10 CCS：发布：1996-09-15 实施：1996-09-15

GB/T 2951.51-2008 电缆和光缆绝缘和护套材料通用试验方法.第51部分:填充膏专用试验方法.滴点.油分离.低温脆性.总酸值.腐蚀性.23℃时的介电常数.23℃和100℃时的直流电阻率
简介：GB/T 2951的本部分规定了通信设备，包括船舶和近海用电缆和光缆填充膏的实验方法。本部分规定了填充膏的滴点测定、油分离测定、低温脆性试验、总酸值测定、腐蚀性试验、23℃时介电常数测定、23℃和100℃时的直流电阻率测定等试验方法。
信息：ICS：29.060 CCS：K15 发布：2008-06-26 实施：2009-04-01

KS C IEC 60811-5-1-2006(2016) 电缆和光缆绝缘和护套材料通用试验方法第5－1部分:填充化合物专用方法滴点油分离低温脆性总酸值无腐蚀性组分23℃介电常数23℃和100℃直流电阻率
简介：
信息：ICS： CCS：发布：2006-11-03 实施：

ISO 660:1996 动植物脂肪和油.酸值和酸度的测定
简介：
信息：ICS：67.200.10 CCS：发布：1996-05-09 实施：

GB/T 2951.10-1997 电缆绝缘和护套材料通用试验方法第5部分;填充膏专用试验方法第1节:滴点--油分离--低温脆性--总酸值--腐蚀性--23℃时的介电常数--23℃和100℃时的直流电阻率
简介：本标准规定的试验条件和试验参数适用于通信电缆中的填充膏材料。
信息：ICS：29.060 CCS：K13 发布：1997-10-28 实施：1998-10-01

ASTM D5559-95(2006) 用于测定磺酸和硫酸化油中铵或三乙醇胺皂的游离脂肪酸/酸值的酸度的标准测试方法
简介：
信息：ICS：71.080.40 CCS：发布：2006-04-01 实施：

ASTM D465-1996 松脂制品包括妥尔油及其它相关产品酸值的标准试验方法
简介：1.1 These test methods are intended for determining the acid number of naval store products as defined in Terminology D804 including tall oil products, wood and gum rosin, and other related materials. These test methods may not be applicable to all modified rosin products. Two test methods are covered, as follows: 1.1.1 Potentiometric method (referee), and 1.1.2 Internal indicator method (alternate). 1.2 The potentiometric method is suitable for use with both light- and dark-colored products. It should be considered the referee method. The internal indicator method is suitable for use only with light- and medium-colored products with a Gardner color of less than 12. It should be considered the alternate method. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.060.20 (Binders) CCS：G50 发布：1996 实施：

GB/T 7599-1987 运行中变压器油、汽轮机油酸值测定法(BTB法)
简介：本方法适用于测定运行中变压器油、汽轮机油的酸值。
信息：ICS：75.100 CCS：E38 发布：1987-03-26 实施：1988-01-01

ASTM D465-05 包括塔尔油和其他相关产品在内的海军仓库产品酸值的标准试验方法
简介：
信息：ICS：87.060.20 CCS：发布：2005-12-01 实施：

ASTM D5559-95 用于测定磺酸和硫酸化油中铵或三乙醇胺皂的游离脂肪酸/酸值的酸度的标准测试方法
简介：
信息：ICS： CCS：发布：1995-05-15 实施：

KS C IEC 60811-5-1-2021 电缆和光缆的绝缘和护套材料.通用试验方法.第5-1部分:填充化合物专用方法.滴点.油分离.低温脆性.总酸值.无腐蚀成分.23℃下的介电常数.23℃和100℃下的直流电阻率
简介：
信息：ICS： CCS：发布：2021-10-21 实施：

ASTM D465-2005 松脂制品包括妥尔油及其相关产品酸值的标准试验方法
简介：These test methods are designed to broaden the scope of the earlier editions of the test method by the inclusion of tall oil and tall oil derived products as test materials and will be referenced in Test Methods D 803. The acid number is an important property of naval stores products, tall oil, and the products obtained by the fractionation of tall oil. It is the test method widely used to determine the total free acid content of these products. The potentiometric test method should be used when the most reproducible results are required.1.1 These test methods are intended for determining the acid number of naval store products as defined in Terminology D 804 including tall oil products, wood and gum rosin, and other related materials. These test methods may not be applicable to all modified rosin products. Two test methods are covered, as follows:1.1.1 Potentiometric method (referee), and1.1.2 Internal indicator method (alternate).1.2 The potentiometric method is suitable for use with both light- and dark-colored products. It should be considered the referee method. The internal indicator method is suitable for use only with light- and medium-colored products with a Gardner color of less than 12. It should be considered the alternate method.1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.060.20 (Binders) CCS：B66;G52 发布：2005 实施：

ASTM D5559-95(2001) 用于测定磺酸和硫酸化油中铵或三乙醇胺皂的游离脂肪酸/酸值的酸度的标准测试方法
简介：
信息：ICS：71.080.40 CCS：发布：1995-05-15 实施：

DIN EN 14104-2021 脂肪和油的衍生物. 脂肪酸甲基酯(FAME). 酸值的测定; 德文版本EN 14104-2021
简介：This document specifies a titrimetric method for the determination of acid value in Fatty Acid Methyl Esters, hereinafter referred as FAME.
信息：ICS：67.200.10 CCS：X14 发布：2021-04-00 实施：

ASTM D465-2005(2010) 松脂制品包括妥尔油及其相关产品酸值的标准试验
简介：These test methods are designed to broaden the scope of the earlier editions of the test method by the inclusion of tall oil and tall oil derived products as test materials and will be referenced in Test Methods D803. The acid number is an important property of naval stores products, tall oil, and the products obtained by the fractionation of tall oil. It is the test method widely used to determine the total free acid content of these products. The potentiometric test method should be used when the most reproducible results are required.1.1 These test methods are intended for determining the acid number of naval store products as defined in Terminology D804 including tall oil products, wood and gum rosin, and other related materials. These test methods may not be applicable to all modified rosin products. Two test methods are covered, as follows: 1.1.1 Potentiometric method (referee), and 1.1.2 Internal indicator method (alternate). 1.2 The potentiometric method is suitable for use with both light- and dark-colored products. It should be considered the referee method. The internal indicator method is suitable for use only with light- and medium-colored products with a Gardner color of less than 12. It should be considered the alternate method. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.060.20 CCS：G52 发布：2005 实施：

ASTM D5559-1995(2006) 磺酸化或硫酸化油中不存在铵或三乙醇胺皂时酸度作为游离脂肪酸/酸值测定的标准试验方法
简介：This test method is intended for use in the determination of the acidity as free fatty acids in the absence of ammonium or triethanolamine soaps in sulfonated and sulfated oils for the purpose of quality assurance.1.1 This test method covers the determination of the acidity as free fatty acids existing in a sample of sulfonated or sulfated oil, or both, by titrating the sample dissolved in a solvent. It is not applicable in the presence of ammonium or triethanolamine soaps or salts or other compounds that do not react neutral to phenolphthalein when dissolved in alcohol. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：71.080.40 (Organic acids) CCS：G16 发布：1995 实施：

ASTM D465-15(2020) 包括妥尔油及其他相关产品在内的松木化工产品的酸值标准试验方法
简介：
信息：ICS：87.060.20 CCS：发布：2020-06-01 实施：

NF C32-033/A1-2004 电缆和光缆的绝缘和护套材料.通用试验方法.第5-1部分:填充复合物的专用方法.滴点.油的分离.较低温脆性.总酸值.无腐蚀性成分.23℃时的介电常数.23℃和100℃的直流电阻率
简介：
信息：ICS：29.035.20 CCS：K13 发布：2004-07-01 实施：2004-07-05

ASTM D5559-1995(2001) 磺酸化或硫酸化油中不存在铵或三乙醇胺皂时酸度作为游离脂肪酸/酸值测定的标准试验方法
简介：1.1 This test method covers the determination of the acidity as free fatty acids existing in a sample of sulfonated or sulfated oil, or both, by titrating the sample dissolved in a solvent. It is not applicable in the presence of ammonium or triethanolamine soaps or salts or other compounds that do not react neutral to phenolphthalein when dissolved in alcohol. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：71.080.40 (Organic acids) CCS：G16 发布：1995 实施：

ASTM D5559-95(2017) 用于测定磺酸和硫酸化油中铵或三乙醇胺皂的游离脂肪酸/酸值的酸度的标准测试方法
简介：
信息：ICS：71.080.40 CCS：发布：2017-04-01 实施：

IEC 60811-5-1 Edition 1.1-2004 电缆和光缆用绝缘和护套材料.通用试验方法.第5-1部分:填充复合物的专用方法.滴点.油分离.较低温脆性.总酸值.无腐蚀性成分.23鳦时的电容率.23鳦和100鳦时的直流电阻率
简介：Specifies the test methods for filling compounds of electric cables used with telecommunication equipment. Gives the methods for drop-point, separation of oil, lower temperature brittleness, total acid number, absence of corrosive components, permittivit
信息：ICS：29.035.01 CCS：K13 发布：2004-01 实施：

ASTM D5559-1995 磺酸化或硫酸化油中不存在铵或三乙醇胺皂时酸度作为游离脂肪酸/酸值测定的标准试验方法
简介：1.1 This test method covers the determination of the acidity as free fatty acids existing in a sample of sulfonated or sulfated oil, or both, by titrating the sample dissolved in a solvent. It is not applicable in the presence of ammonium or triethanolamine soaps or salts or other compounds that do not react neutral to phenolphthalein when dissolved in alcohol. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS： CCS：G16 发布：1995 实施：

ASTM D465-15 包括妥尔油及其他相关产品在内的松木化工产品的酸值标准试验方法
简介：
信息：ICS：87.060.20 CCS：发布：2015-12-01 实施：

IEC 60811-5-1 AMD 1-2003 电缆和光缆用绝缘和护套材料.通用试验方法.第5-1部分:填充复合物的专用方法.滴点.油分离.较低温脆性.总酸值.无腐蚀性成分.23℃时的介电常数.23℃和100℃时的直流电阻率.修改件1
简介：This standard is Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C; Amendment 1.
信息：ICS：29.035.01 CCS：K13 发布：2003-12 实施：

ASTM D5559-1995(2011) 磺酸化或硫酸化油中不存在铵或三乙醇胺皂时酸度作为游离脂肪酸/酸值测定的标准试验方法
简介：This test method is intended for use in the determination of the acidity as free fatty acids in the absence of ammonium or triethanolamine soaps in sulfonated and sulfated oils for the purpose of quality assurance.1.1 This test method covers the determination of the acidity as free fatty acids existing in a sample of sulfonated or sulfated oil, or both, by titrating the sample dissolved in a solvent. It is not applicable in the presence of ammonium or triethanolamine soaps or salts or other compounds that do not react neutral to phenolphthalein when dissolved in alcohol. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：71.080.40 CCS：G16 发布：1995 实施：

JIS C3660-5-1-2011 电缆绝缘和护套材料.通用试验方法.第5-1部分:填料用专门方法.下降点.油分离.低温脆性.总酸值.腐蚀组件的缺失.23°C的电容率.23°C和100°C的直流电阻率
简介：
信息：ICS：29.035.20;29.060.20 CCS：K15 发布：2011-01-20 实施：

DIN EN 14104-2003 脂肪和油的衍生物.脂肪酸甲基酯(FAME).酸值的测定
简介：
信息：ICS：67.200.10 CCS：X14 发布：2003-10 实施：

NF C32-033-1993 绝缘材料和电缆套管的普通试验方法.第5部分:填料特殊方法.第1节:滴点.油的分离.低温脆化.全部酸值.腐蚀元件的缺乏.23℃的电容率.23℃及100℃时的直流电阻率
简介：
信息：ICS：29.060.20;29.035.20 CCS：K13;K15 发布：1993-08 实施：1993-07-20

ASTM D5559-95(2011) 用于测定磺酸和硫酸化油中铵或三乙醇胺皂的游离脂肪酸/酸值的酸度的标准测试方法
简介：
信息：ICS：71.080.40 CCS：发布：2011-01-01 实施：

NF T60-702-2003 脂肪和油的衍生物.脂肪酸甲酯(FAME).酸值的测定
简介：
信息：ICS：67.200.10 CCS：X14 发布：2003-07-01 实施：2003-07-20

HD 505.5.1 S1-1992 电缆绝缘和护套材料通用试验方法.第5部分:填充复合物的专用方法.第1节:滴点.油分离.较低温脆性.总酸值.
简介：
信息：ICS： CCS：发布：1992-01-01 实施：

GOST IEC 60811-5-1-2011 电缆填充复合物的专门试验方法.滴点.油分离.较低温脆性.总酸值.无腐蚀性成分.23℃时的电容率.23℃和100℃时的直流电阻率
简介：
信息：ICS：29.035.01 CCS：发布：2011 实施：2013-01-01

EN 14104-2003 脂肪和油的衍生物.脂肪酸甲基酯(FAME).酸值的测定
简介：This European Standard specifies one titrimetric method for the determination of acid value in light coloured Fatty Acid Methyl Esters, hereinafter referred as FAME.It allowed the determination of acid value within a range of 0,10 mg KOH/g to 100 mg KOH/g.
信息：ICS：67.200.10 CCS：发布：2003-05-13 实施：

DS/IEC 811-5-1-1991 电缆绝缘护套材料的通用试验方法.第5部分:填充复合物的专用方法.第1节:滴点、分离油、较低温脆性、总酸值、不腐蚀组分.在23℃时的电容率、在23℃和100℃时的电阻率
简介：
信息：ICS：142 CCS：发布：1991 实施：

ASTM D465-05(2010) 包括塔尔油和其他相关产品在内的海军仓库产品酸值的标准试验方法
简介：
信息：ICS：87.060.20 CCS：发布：2010-06-01 实施：

ISO 660-1996/Amd 1-2003 动植物脂肪和油.酸值和酸度的测定.修改件1:初榨橄榄油的精度数据
简介：
信息：ICS：67.200.10 CCS：发布：2003-03-11 实施：

IEC 60811-5-1-1990 电缆绝缘和护套材料的通用试验方法.第5部分:填充复合物的专用方法.第1节:滴点.油分离.较低温脆性.总酸值.无腐蚀性成分.23℃时的电容率.23℃和100℃时的直流电阻率
简介：Specifies specific test methods. Gives parameters to be measured, conditions to be maintained, and requirements to be met.
信息：ICS：29.035.01 CCS：K13 发布：1990-02 实施：

TCVN 6127-2010 动物和植物的脂肪和油.酸值和酸度的测定
简介：
信息：ICS： CCS：发布：2010 实施：

ASTM D465-96 包括塔尔油和其他相关产品在内的海军仓库产品酸值的标准试验方法
简介：
信息：ICS：87.060.20 CCS：发布：2001-06-10 实施：

ISO 660:1983 动植物脂肪和油.酸值和酸度的测定
简介：
信息：ICS：67.200.10 CCS：发布：1983-11-01 实施：

DIN EN ISO 660-2009 动植物脂肪和油.酸值和酸度的测定(ISO 660:2009),DIN EN ISO 660:2009-10的英文版本
简介：This International Standard specifies three methods (two titrimetric and one potentiometric) for thedetermination of the acidity in animal and vegetable fats and oils, hereinafter referred to as fats, The acidity isexpressed preferably as acid value, or alternatively as acidity calculated conventionallyThis International Standard is applicable to refined and crude vegetable or animal fats and oils, soap stockfatty acids or technical fatty acids. The methods are not applicable to waxes.Since the methods are completely non-specific, they cannot be used to differentiate between mineral acids.free fatty acids, and other organic acids. The acid value, therefore, also includes any mineral acids that maybe present.
信息：ICS：67.200.10 CCS：X14 发布：2009-10 实施：

ASTM D465-01 包括塔尔油和其他相关产品在内的海军仓库产品酸值的标准试验方法
简介：
信息：ICS：87.060.20 CCS：发布：2001-06-10 实施：

ISO 660-1983 动植物脂肪和油.酸值和酸度的测定
简介：
信息：ICS：0520;5700 CCS：X14 发布：1983-11 实施：

BS EN ISO 660-2009 动植物脂肪和油.酸值和酸度的测定(ISO 660-2009)
简介：This International Standard specifies three methods (two titrimetric and one potentiometric) for thedetermination of the acidity in animal and vegetable fats and oils, hereinafter referred to as fats. The acidity is expressed preferably as acid value, or alternatively as acidity calculated conventionally.This International Standard is applicable to refined and crude vegetable or animal fats and oils, soap stock fatty acids or technical fatty acids. The methods are not applicable to waxes.Since the methods are completely non-specific, they cannot be used to differentiate between mineral acids, free fatty acids, and other organic acids. The acid value, therefore, also includes any mineral acids that may be present.
信息：ICS：67.200.10 CCS：X14 发布：2009-07-31 实施：2009-07-31

ASTM D465-2001 松脂制品包括妥尔油及其它相关产品酸值的标准试验方法
简介：1.1 These test methods are intended for determining the acid number of naval store products as defined in Terminology D804 including tall oil products, wood and gum rosin, and other related materials. These test methods may not be applicable to all modified rosin products. Two test methods are covered, as follows: 1.1.1 Potentiometric method (referee), and 1.1.2 Internal indicator method (alternate). 1.2 The potentiometric method is suitable for use with both light- and dark-colored products. It should be considered the referee method. The internal indicator method is suitable for use only with light- and medium-colored products with a Gardner color of less than 12. It should be considered the alternate method. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.060.20 (Binders) CCS：G50 发布：2001 实施：

PN R66165-1974 含油种子．油中酸值的测定
简介：Przedmiotem normy jest oznaczanie liczby kwasowej t?uszczu w ziarnie ro?lin oleistych.
信息：ICS： CCS：发布：1974 实施：

ISO 660:2009 动植物脂肪和油——酸值和酸度的测定
简介：
信息：ICS：67.200.10 CCS：发布：2009-06-09 实施：

BS EN 60811-5-1-2000 电缆的绝缘和护套材料.通用试验方法.填充复合物的专用方法.滴点.油分离.低温脆性.总酸值.无腐蚀性成分.23℃时的电容率.23℃和100℃时的直流电阻率
简介：Specifies test methods for filling compounds of electric and optical fibre cables used with telecommunications equipment.
信息：ICS：29.035.01 CCS：K15 发布：2000-06-15 实施：2000-06-15

简介： 信息：

EN ISO 660-2009 动植物脂肪和油.酸值和酸度的测定
简介：This International Standard specifies three methods (two titrimetric and one potentiometric) for the determination of the acidity in animal and vegetable fats and oils, hereinafter referred to as fats. The acidity is expressed preferably as acid value, or alternatively as acidity calculated conventionally.This International Standard is applicable to refined and crude vegetable or animal fats and oils, soap stock fatty acids or technical fatty acids. The methods are not applicable to waxes.Since the methods are completely non-specific, they cannot be used to differentiate between mineral acids, free fatty acids, and other organic acids. The acid value, there
信息：ICS：67.200.10 CCS：发布：2009-06-01 实施：

NF T60-204-1999 动植物脂肪和油.酸值和酸度的测定
简介：
信息：ICS：67.200.10 CCS：X14 发布：1999-07-01 实施：1999-07-05

简介： 信息：

ISO 660-2009 动物和植物的脂肪和油.酸值和酸度的测定
简介：
信息：ICS：67.200.10 CCS：X14 发布：2009-06 实施：

SN/T 0776-1999 出口芳香油、单离和合成香料酸值测定法
简介：
信息：ICS： CCS：A10 发布：1999-05-05 实施：1999-08-01

简介： 信息：