苯胺点检测标准苯胺点-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

苯胺点相关标准参考信息

GB/T 262-2010 石油产品和烃类溶剂苯胺点和混合苯胺点测定法
简介：警告：本标准涉及某些有危险性的材料、操作和设备，但无意对此有关的所有安全问题都提出建议。因此，使用者在应用本标准之前应建立适当的安全和防护措施，并确定相关规章限制的适用性。本标准规定了石油产品和烃类溶剂苯胺点的测定方法，以及当样品苯胺点低于苯胺-试样混合物中苯胺结晶温度时上述产品的混合苯胺点的测定方法。本标准方法一适用于测定初馏点高于室温、且苯胺点低于苯胺-试样混合物的泡点、而高于其凝点的透明样品。本标准方法二适用于采用自动仪器测定方法一所适用的样品以及方法一无法测定的颜色极深的样品。本标准方法三适用于测定在苯胺点温度时会明显挥发的样品，如航空汽油。
信息：ICS：75.080 CCS：E30 发布：2011-01-10 实施：2011-05-01

ASTM D611-82(1998) 石油产品和烃类溶剂的苯胺点和混合苯胺点的标准测试方法
简介：
信息：ICS：75.080 CCS：发布：2001-12-10 实施：

JIS K2256-1985 石油产品的苯胺点及混合苯胺点的测定方法
简介：
信息：ICS：75.080 CCS：E30 发布：1985-11-01 实施：1985-11-01

GB/T 262-1988 石油产品苯胺点测定法
简介：本标准规定了测定石油产品苯胺点的方法。．本标准提供两种试验装置测定苯胺点。第一种装置适用于浅色石油产品;第二种装置适用于深色石油产品。
信息：ICS：75.080 CCS：E30 发布：1988-09-05 实施：1989-06-01

FORD FLTM BJ 004-01-2001 碳氢化合物溶剂的苯胺点
简介：
信息：ICS： CCS：发布：2001-07-23 实施：

NBN T 52-079-1985 石油产品和碳氢化合物溶剂．苯胺点和混合苯胺点的测定
简介：La présente norme spécifie les méthodes de détermination du point d'aniline des produits pétroliers et des solvants hydrocarbonés, utilisables lorsque le point d'aniline du produit est inférieur au point de bulle, et supérieur au point de solidification du mélange aniline-prise d'essai.Elle décrit également une variante dite de détermination du point d'aniline "enmélange", applicable aux produits pétroliers et aux solvants hydrocarbonés dont lespoints d'aniline sont inférieurs à la température de cristallisation de l'aniline dans le mélange d'aniline et de prise d'essai.
信息：ICS： CCS：发布：1985-10-24 实施：

ISO 21493-2019 石油产品浊点和苯胺点当量的测定
简介：
信息：ICS：75.080 CCS：发布：2019-07-24 实施：

ASTM D611-2001a 石油产品和烃类溶剂苯胺点和混合苯胺点的标准试验方法
简介：1.1 These test methods cover the determination of the aniline point of petroleum products and hydrocarbon solvents. Method A is suitable for transparent samples with an initial boiling point above room temperature and where the aniline point is below the bubble point and above the solidification point of the aniline-sample mixture. Method B, a thin-film method, is suitable for samples too dark for testing by Method A. Methods C and D are for samples that may vaporize appreciably at the aniline point. Method D is particularly suitable where only small quantities of sample are available. Method E describes a procedure using an automatic apparatus suitable for the range covered by Methods A and B. 1.2 These test methods also cover the determination of the mixed aniline point of petroleum products and hydrocarbon solvents having aniline points below the temperature at which aniline will crystallize from the aniline-sample mixture. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Sections 7.
信息：ICS：71.080.01 (Organic chemicals in general); 87.060.3 CCS：E30 发布：2001 实施：

CSN 65 6180-1985 石油产品和烃溶剂．苯胺点的测定
简介：Schválení ST SEV 4535-84■ doporu?ilo ministerstvo pr?myslu CSR. Zpracovatel a oborové normaliza?ní st?edisko: Chemopetrol, G?, Praha — Ing. Ivana SvadlenkováPracovník ??adu pro normalizaci a mě?ení: Ing. Emílie Skardová
信息：ICS： CCS：发布：1985-02-28 实施：

ASTM D611-12(2016) 石油产品和烃类溶剂的苯胺点和混合苯胺点的标准测试方法
简介：
信息：ICS：71.080.01 CCS：发布：2016-10-01 实施：

ASTM D611-2001 石油产品和烃类溶剂苯胺点和混合苯胺点的标准试验方法
简介：1.1 These test methods cover the determination of the aniline point of petroleum products and hydrocarbon solvents. Method A is suitable for transparent samples with an initial boiling point above room temperature and where the aniline point is below the bubble point and above the solidification point of the aniline-sample mixture. Method B, a thin-film method, is suitable for samples too dark for testing by Method A. Methods C and D are for samples that may vaporize appreciably at the aniline point. Method D is particularly suitable where only small quantities of sample are available. Method E describes a procedure using an automatic apparatus suitable for the range covered by Methods A and B. 1.2 These test methods also cover the determination of the mixed aniline point of petroleum products and hydrocarbon solvents having aniline points below the temperature at which aniline will crystallize from the aniline-sample mixture. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Sections 7.
信息：ICS：71.080.01 (Organic chemicals in general); 87.060.3 CCS：E30 发布：2001 实施：

STAS 178-1982 液态石油产品．测定苯胺点
简介：Prezentul standard stabile?te metodele de determinare a punctului de anilin? al produselor petroliere lichide.
信息：ICS： CCS：发布：1982-02-01 实施：

JIS K2256-2013 石油产品.苯胺点及混合苯胺点的测定
简介：
信息：ICS：75.080 CCS：E30 发布：2013-12-20 实施：

ASTM D611-2001b 石油产品和烃类溶剂苯胺点和混合苯胺点的标准试验方法
简介：1.1 These test methods cover the determination of the aniline point of petroleum products and hydrocarbon solvents. Method A is suitable for transparent samples with an initial boiling point above room temperature and where the aniline point is below the bubble point and above the solidification point of the aniline-sample mixture. Method B, a thin-film method, is suitable for samples too dark for testing by Method A. Methods C and D are for samples that may vaporize appreciably at the aniline point. Method D is particularly suitable where only small quantities of sample are available. Method E describes a procedure using an automatic apparatus suitable for the range covered by Methods A and B. 1.2 These test methods also cover the determination of the mixed aniline point of petroleum products and hydrocarbon solvents having aniline points below the temperature at which aniline will crystallize from the aniline-sample mixture. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Sections 7.
信息：ICS：71.080.01 (Organic chemicals in general); 87.060.3 CCS：E30 发布：2001 实施：

ASTM D611-1982(1998) 石油产品和烃类溶剂苯胺点和混合苯胺点的标准试验方法
简介：1.1 These test methods cover the determination of the aniline point of petroleum products and hydrocarbon solvents. Method A is suitable for transparent samples with an initial boiling point above room temperature and where the aniline point is below the bubble point and above the solidification point of the aniline-sample mixture. Method B, a thin-film method, is suitable for samples too dark for testing by Method A. Methods C and D are for samples that may vaporize appreciably at the aniline point. Method D is particularly suitable where only small quantities of sample are available. Method E describes a procedure using an automatic apparatus suitable for the range covered by Methods A and B. 1.2 These test methods also cover the determination of the mixed aniline point of petroleum products and hydrocarbon solvents having aniline points below the temperature at which aniline will crystallize from the aniline-sample mixture. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Sections 7.
信息：ICS：71.080.01 (Organic chemicals in general); 87.060.3 CCS：E30 发布：1982 实施：

JIS K2256-2013 石油产品.苯胺点及混合苯胺点的测定
简介：
信息：ICS：75.080 CCS：E30 发布：2013-12-20 实施：

DIN ISO 2977-2000 石油产品和烃类溶剂.苯胺点和混合苯胺的点测定
简介：The method described in the document determines the aniline point or the mixed aniline point of petroleum products and hydrocarbon based solvents. For the test, the sample and aniline of sample, aniline and n-heptane are mixed. The mixture is then heated in temperature increments prescribed in the document, until the phases of the mixture are thoroughly mixed. Subsequently the sample is cooled until the phases separate again. The corresponding temperature is the aniline point or the mixed aniline point respectively.,,
信息：ICS：75.080 CCS：E30 发布：2000-11 实施：

GOST 12329-1977 溶剂.对苯胺点及芳香碳氢化合物测定法
简介：Настоящий стандарт устанавливает метод определения анилиновой точки нефтепродуктов и углеводородных растворителей с началом кипения вы
信息：ICS：75.080 CCS：发布：1977 实施：1978-07-01

ASTM D611-12 石油产品和烃类溶剂的苯胺点和混合苯胺点的标准测试方法
简介：
信息：ICS：71.080.01 CCS：发布：2012-11-01 实施：

BS 2000-2-1998 石油及其产品的试验方法.石油产品和烃类溶剂.苯胺点和混合苯胺点的测定.
简介：Identical with IP 2/98.
信息：ICS：75.080 CCS：E30 发布：1998-03-01 实施：1998-03-01

ISO 2977-1974 石油产品和碳氢化合物溶剂.苯胺点和混合苯胺点的测定
简介：
信息：ICS：75.080 CCS：发布：1974-07-01 实施：

ASTM D611-2012 石油产品和烃类溶剂的苯胺点和混合苯胺点的标准试验方法
简介：5. Significance and UseTop Bottom 5.1 The aniline point (or mixed aniline point) is useful as an aid in the characterization of pure hydrocarbons and in the analysis of hydrocarbon mixtures. Aromatic hydrocarbons exhibit the lowest, and paraffins the highest values. Cycloparaffins and olefins exhibit values that lie between those for paraffins and aromatics. In homologous series the aniline points increase with increasing molecular weight. Although it occasionally is used in combination with other physical properties in correlative methods for hydrocarbon analysis, the aniline point is most often used to provide an estimate of the aromatic hydrocarbon content of mixtures. 1.1 These test methods cover the determination of the aniline point of petroleum products and hydrocarbon solvents. Test Method A is suitable for transparent samples with an initial boiling point above room temperature and where the aniline point is below the bubble point and above the solidification point of the aniline-sample mixture. Test Method B, a thin-film method, is suitable for samples too dark for testing by Test Method A. Test Methods C and D are for samples that may vaporize appreciably at the aniline point. Test Method D is particularly suitable where only small quantities of sample are available. Test Method E describes a procedure using an automatic apparatus suitable for the range covered by Test Methods A and B. 1.2 These test methods also cover the determination of the mixed aniline point of petroleum products and hydrocarbon solvents having aniline points below the temperature at which aniline will crystallize from the aniline-sample mixture. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 WARNING???Mercury has been designated by many regulatory agencies as a hazardous material that can cause central nervous system, kidney and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPA???s website???http://www.epa.gov/mercury/faq.htm???for additional information. Users should be aware that selling mercury and/or mercury containing products into your state or country may be prohibited by law. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific warning statements are given in Section 7.
信息：ICS：71.080.01 (Organic chemicals in general); 87.060.3 CCS：E30 发布：2012 实施：

JIS K2256-1998 石油产品.苯胺点及混合苯胺点的测定
简介：この規格は，石油製品のアニリン点及び混合アニリン点を測定する方法について規定する。
信息：ICS：75.080 CCS：E30 发布：1998-01-20 实施：

CSN 25 8154-1972 苯胺点试验用温度计
简介：Zpracovatel: Sklárny Kavalier, n. p., Sázava, závod Dr?kov,Miroslav Markup Pracovník lí?adu pro normalizaci a mě?ení: Ing. Ji?í Kolá?
信息：ICS： CCS：发布：1972-01-01 实施：

INTA 15 02 48 苯胺和苯胺庚烷点
简介：1. Determinar el punto de anilina de productos petrolíferos y disolventes, cuando son inferiores al punto de ebullición y superiores al de solidificación de la mezcla anilina-muestra y, además, el punto de anilina-heptano cuando es inferior a la temperatura de cristalización de la anilina en la mezcla anilina-muestra.1.1 Los puntos de anilina-heptano difieren de los determinados sobre los mismos productos empleando como diluyen tes gasolinas con puntos de anilina de 60 °C y son, en general, algunos grados más altos que los últimos. Estas diferencias dependen tanto de la naturaleza del producto ensayado como de la del diluyente empleado.
信息：ICS： CCS：发布：2008-1-1 实施：

ISO 2977:1997 石油产品和碳氢化合物溶剂——苯胺点和混合苯胺点的测定
简介：
信息：ICS：75.080 CCS：发布：1997-07-03 实施：

NF T67-123-1968 芳香烃.溶剂石脑油的试验方法.混合物苯胺点的测定
简介：
信息：ICS：71.080.15 CCS：G17 发布：1968-08-01 实施：1968-07-31

UNE 48 171 苯胺点和混合苯胺点
简介：Esta norma tiene por objeto indicar el método que se debe seguir para determinar el punto de anilina de los di-solventes, cuando son inferiores al punto de ebullición y superiores al de solidificación de la mezcla anilina-muestra y además, el punto de anilina mezclada, cuando es inferior a la temperatura de cristalización de la anilina en la mezcla anilina-muestra.
信息：ICS： CCS：发布：2008-1-1 实施：

ISO 2977-1997 石油产品和烃类溶剂苯胺点和混合苯胺点的测定
简介：This International Standard specifies a method for the determination of the aniline point of petroleum products and hydrocarbon solvents, and the mixed aniline point of those products having aniline points below the temperature at which aniline will crystallize from the aniline-sample mixture.Method 1 describes a procedure for transparent samples with an initial boiling point above ambient temperature, and for those with an aniline point below the bubble point and above the solidification point of the aniline-sample mixture.Method 2, a thin film method, describes a procedure for samples too dark for testing by method 1.Methods 3 and 4 are for samples that may vaporize appreciably at the aniline point.NOTE 1 Method 4 is particularly suitable where only small quantities of sample are available.Method 5 describes a procedure using automated or automatic apparatus suitable for the range covered by methods 1 and 2.NOTE 2 The aniline point (or mixed aniline point) is useful as an aid in the characterization of pure hydrocarbons and in the analysis of hydrocarbon mixtures. Aromatic hydrocarbons exhibit the lowest values and paraffins the highest, with cycloparaffins and olefins exhibiting intermediate values. In a homologous series, the aniline points increase with increasing molecular mass.NOTE 3 Although the aniline point can be used in combination with other physical properties in correlative methods for hydrocarbon analysis, the most frequent usage is to provide an estimate of the aromatic content (or "aromaticity") of hydrocarbon mixtures.
信息：ICS：75.080 CCS：E30 发布：1997-07 实施：

VSM 13760-1967 矿物油．苯胺点
简介：
信息：ICS： CCS：发布：1967-5-1 实施：

TCVN 3173-2008 石油产品和烃类溶剂.苯胺点和混合苯胺点测定
简介：
信息：ICS： CCS：发布：2008 实施：

STAS SR ISO 2977-1996 石油产品和烃类溶剂．苯胺点和混合苯胺点的测试
简介：1.1 Prezentul Standard Interna?ional stabile?te metodele de determinare a punctului de anilin? al produselor petroliere ?i solven?ilor.1.2 De asemenea stabile?te metoda de determinare a punctului de anilin? ?n amestec pentru produse petroliere ?i solven?i ce au punctul de anilin? sub temperatura de cristalizare a anilinei din amestecul anilin?-prob?.1.3 Metoda 1 este indicat? pentru probele transparente cu un punct
信息：ICS：76.080 CCS：发布：1996-3-1 实施：

ABNT MB-299-1962 石油产品苯胺点和混合苯胺点检测的试验方法
简介：Este método fixa o modo de proceder-se à determina??o do ponto de anilina de produtos de petróleo e solventes das séries dos hidrocarbonetos cujo ponto de anilina seja inferior ao ponto de bolha e superior ao ponto de solidifica??o da mistura anilina-amostra. Fixa também o modo de proceder-se à determina??o do ponto de anilina misto de produtos de petróleo e solventes das séries de hidrocarbonetos que apresentam ponto de anilina inferior à temperatura na qual a anilina separa, por cristaliza??o, da mistura com a amostra.
信息：ICS： CCS：发布：1962-1-1 实施：

ASTM D611-07 石油产品和烃类溶剂的苯胺点和混合苯胺点的标准测试方法
简介：
信息：ICS：71.080.01 CCS：发布：2007-11-01 实施：

NF M07-021-1996 液体石油产品.苯胺点和混合苯胺点的测定
简介：
信息：ICS：75.080 CCS：E30 发布：1996-12-01 实施：1996-12-05

SIS 15 02 18 油和油脂，苯胺点
简介：
信息：ICS： CCS：发布：1953-04-15 实施：

ASTM D611-2007 石油产品和烃类溶剂的苯胺点和混合苯胺点用标准试验方法
简介：The aniline point (or mixed aniline point) is useful as an aid in the characterization of pure hydrocarbons and in the analysis of hydrocarbon mixtures. Aromatic hydrocarbons exhibit the lowest, and paraffins the highest values. Cycloparaffins and olefins exhibit values that lie between those for paraffins and aromatics. In homologous series the aniline points increase with increasing molecular weight. Although it occasionally is used in combination with other physical properties in correlative methods for hydrocarbon analysis, the aniline point is most often used to provide an estimate of the aromatic hydrocarbon content of mixtures.1.1 These test methods cover the determination of the aniline point of petroleum products and hydrocarbon solvents. Test Method A is suitable for transparent samples with an initial boiling point above room temperature and where the aniline point is below the bubble point and above the solidification point of the aniline-sample mixture. Test Method B, a thin-film method, is suitable for samples too dark for testing by Test Method A. Test Methods C and D are for samples that may vaporize appreciably at the aniline point. Test Method D is particularly suitable where only small quantities of sample are available. Test Method E describes a procedure using an automatic apparatus suitable for the range covered by Test Methods A and B.1.2 These test methods also cover the determination of the mixed aniline point of petroleum products and hydrocarbon solvents having aniline points below the temperature at which aniline will crystallize from the aniline-sample mixture.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific warning statements are given in Section 7.
信息：ICS：71.080.01 (Organic chemicals in general); 87.060.3 CCS：E30 发布：2007 实施：

SIS SS-ISO 2977/Cor1-1992 石油产品和烃类溶剂．苯胺点和混合苯胺点的测定．技术勘误表1
简介：
信息：ICS： CCS：发布：1992-11-16 实施：

MNOSZ 11736-1952 矿物产品．苯胺点含量定义
简介：
信息：ICS： CCS：发布：1952-01-01 实施：

KS M 2053-2004 石油产品苯胺点及混合苯胺点测定法
简介：이 규격은 석유 제품의 아닐린점 및 혼합 아닐린점을 측정하는 방법에 대하여 규정한다.
信息：ICS：75.08 CCS：G60 发布：2004-06-30 实施：2004-06-30

ISO 2977 CORR 1-1992 石油产品和烃类溶剂.苯胺点和混合苯胺点测定.技术勘误1
简介：
信息：ICS：5740;5650 CCS：E30 发布：1992-10 实施：

简介： 信息：

KS M 2053-2004(2019) 石油产品苯胺点和混合苯胺点试验方法
简介：
信息：ICS：75.080 CCS：发布：2004-06-30 实施：

JUS B.H8.046-1990 石油产品和烃类溶剂．苯胺点和混合苯胺点的测定
简介：
信息：ICS： CCS：发布：1990-01-01 实施：

简介： 信息：

ASTM D611-04 石油产品和烃类溶剂的苯胺点和混合苯胺点的标准测试方法
简介：
信息：ICS：71.080.01 CCS：发布：2004-05-01 实施：

ISO 2977-1989 石油产品和烃类溶剂.苯胺点和混合苯胺点的测定
简介：
信息：ICS：5740;5650 CCS：E30 发布：1989-07 实施：1989-07-15

简介： 信息：

ASTM D611-2004 石油产品和烃类溶剂苯胺点和混合苯胺点的标准试验方法
简介：1.1 These test methods cover the determination of the aniline point of petroleum products and hydrocarbon solvents. Test Method A is suitable for transparent samples with an initial boiling point above room temperature and where the aniline point is below the bubble point and above the solidification point of the aniline-sample mixture. Test Method B, a thin-film method, is suitable for samples too dark for testing by Test Method A. Test Methods C and D are for samples that may vaporize appreciably at the aniline point. Test Method D is particularly suitable where only small quantities of sample are available. Test Method E describes a procedure using an automatic apparatus suitable for the range covered by Test Methods A and B.1.2 These test methods also cover the determination of the mixed aniline point of petroleum products and hydrocarbon solvents having aniline points below the temperature at which aniline will crystallize from the aniline-sample mixture.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.Specific warning statements are given in Section 7.
信息：ICS：71.080.01 (Organic chemicals in general); 87.060.3 CCS：E30 发布：2004 实施：

ISO 2977:1989 石油产品和碳氢化合物溶剂.苯胺点和混合苯胺点的测定
简介：
信息：ICS：75.080 CCS：发布：1989-06-29 实施：

简介： 信息：

ASTM D611-01 石油产品和烃类溶剂的苯胺点和混合苯胺点的标准测试方法
简介：
信息：ICS：75.080 CCS：发布：2001-12-10 实施：

SNI 06-0802-1989 石油产品与相关产品. 苯胺点测试方法
简介：
信息：ICS：75.080 CCS：发布：1989 实施：

简介： 信息：

ASTM D611-82(1998) 石油产品和烃类溶剂的苯胺点和混合苯胺点的标准测试方法
简介：
信息：ICS：75.080 CCS：发布：2001-12-10 实施：

CNS 3575-1987 石油产品及烃类溶剂苯胺点及混合苯胺点试验法
简介：本标准规定石油产品及烃类溶剂苯胺点试验方法，并包括以下各项。1.1 A 法适用于透明试样其初沸点高于室温，苯胺点低于起泡点且高于凝固点之苯胺–试样混合液。1.2 B 法为薄膜法，不适用于 A 法之具深颜色试样者。1.3 C 法及 D 法适用于试样可能于苯胺点蒸发者。D 法特别适用
信息：ICS：75.080;71.040.40 CCS：发布：1987-07-16 实施：1987-07-16

简介： 信息：

ASTM D611-01b 石油产品和烃类溶剂的苯胺点和混合苯胺点的标准测试方法
简介：
信息：ICS：71.080.01 CCS：发布：2001-12-10 实施：

NC 33-50-1986 油和油类产品苯胺点测定
简介：Esta norma establece los métodos de determinación del punto de anilina en los productos del petróleo y solventes hidrocarbu-rados con una temperatura inicial de ebullición superior a la temperatura ambiente y cuyos puntos de anilina son inferiores a la temperatura inicial de ebullición y superiores a la tem-peratura de congelación de la mezcla anilina-muestra.
信息：ICS： CCS：发布：1986-6-1 实施：

简介： 信息：