IEC 61298检测标准IEC 61298-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

IEC 61298相关标准参考信息

GOST R IEC 61298-1-2015 过程测量和控制装置. 绩效评估的通用方法和程序. 第1部分. 通用考量
简介：
信息：ICS：25.040.40 CCS：A50 发布：2015 实施：2016-01-01

IEC 61298-4:2008 过程测量和控制设备 - 评估性能的一般方法和程序 - 第4部分:评估报告内容
简介：
信息：ICS：25.040.40 CCS：发布：2008-10-08 实施：

KS C IEC 61298-4-2003(2008) 过程测量和控制设备 - 用于评估性能和程序一般方法 - 第4部分:评定报告的内容
简介：
信息：ICS：25.040.40 CCS：发布：2003-12-30 实施：

GOST R IEC 61298-1-2015 过程测量和控制装置. 绩效评估的通用方法和程序. 第1部分. 通用考量
简介：
信息：ICS：25.040.40 CCS：发布：2015 实施：2016-01-01

IEC 61298-3:2008 过程测量和控制设备 - 评估性能的一般方法和程序 - 第3部分:影响量的影响测试
简介：
信息：ICS：25.040.40 CCS：发布：2008-10-08 实施：

KS C IEC 61298-2-2003(2008) 过程测量和控制设备 - 通常是用于评价性能的方法和过程 - 第2部分:参考条件下测试
简介：
信息：ICS：25.040.40 CCS：发布：2003-12-30 实施：

GOST R IEC 61298-4-2015 过程测量和控制装置. 绩效评估的通用方法和程序. 第4部分. 评估报告内容
简介：
信息：ICS：25.040.40 CCS：发布：2015 实施：2016-01-01

IEC 61298-2:2008 过程测量和控制设备 - 评估性能的一般方法和程序 - 第2部分:参考条件下的测试
简介：
信息：ICS：25.040.40 CCS：发布：2008-10-08 实施：

IEC 60770-1-1999 Transmetteurs Utilises Dans Les Systemes De Conduite Des Processus Industriels - Partie 1: Methodes D?Evaluation Des Performances (Edition 1.0; Should be Read in Conjunction with IEC 61298 Parts 1 Through 4)
简介：Scope and objectThis part of IEC 60770 is applicable to transmitters which have either a standard analogue electric current output signal or a standard pneumatic output signal in accordance with IEC 60381-1 or IEC 60382. The tests detailed herein may be applied to transmitters which have other output signals@ provided that due allowance is made for such differences.For certain types of transmitters where the sensor is an integral part@ other specific IEC or ISO standards may need to be consulted (e.g. for chemical analysers@ flowmeters@ etc.)This standard is intended to specify uniform methods of test for the evaluation of the performance of transmitters with pneumatic or electric output signals.The methods of evaluation specified in this standard are intended for use by manufacturers to determine the performance of their products and by users or independent testing establishments to verify manufacturersapos; performance specifications.The test conditions defined in this standard@ for example the range of ambient temperatures and power supply@ represent those which commonly arise in use. Consequently@ the values specified herein should be used where no other values are specified by the manufacturer.The tests specified in this standard are not necessarily sufficient for instruments specifically designed for unusually arduous or safety related duties. Conversely@ a restricted series of test may be suitable for instruments designed to perform within a more limited range of conditions.When a full evaluation in accordance with this standard is not required@ those tests which are required shall be performed and the results reported in accordance with those parts of the standard which are relevant.
信息：ICS：/ CCS：/ 发布：1999-02-01 实施：2010-07-31

GOST R IEC 61298-2-2015 过程测量和控制装置. 绩效评估的通用方法和程序. 第2部分. 参考条件下的试验
简介：
信息：ICS：25.040.40 CCS：发布：2015 实施：2016-01-01

IEC 61298-1:2008 过程测量和控制设备 - 评估性能的一般方法和程序 - 第1部分:一般注意事项
简介：
信息：ICS：25.040.40 CCS：发布：2008-10-08 实施：

IEC 61298-3-1998 Dispositifs De Mesure Et De Commande De Processus - Methodes Et Procedures Generales D?Evaluation Des Performances - Partie 3: Essais Pour La Determination Des Effets Des Grandeurs D?Influence (Edition 1.0)
简介：
信息：ICS：/ CCS：/ 发布：1998-02-01 实施：2008-10-11

GOST R IEC 61298-3-2015 过程测量和控制装置. 绩效评估的通用方法和程序. 第3部分. 影响量效应的试验
简介：
信息：ICS：25.040.40 CCS：发布：2015 实施：2016-01-01

IEC 61298-1-2008 Process measurement and control devices – General methods and procedures for evaluating performance – Part 1: General considerations (Edition 2.0)
简介：This part of IEC 61298 specifies general methods and procedures for conducting tests@ and reporting on the functional and performance characteristics of process measurement and control devices. The methods and procedures specified in this standard are applicable to any type of process measurement and control device. The tests are applicable to any such devices characterized by their own specific input and output variables@ and by the specific relationship (transfer function) between the inputs and outputs@ and include analogue and digital devices. For devices that require special tests@ this standard should be used@ together with any product specific standard specifying special tests. This standard covers general principles which apply to the series.
信息：ICS：/ CCS：/ 发布：2008-10-01 实施：2008-10-11

IEC 61298-3-1998 过程测量和控制装置性能评定用一般方法和程序第3部分:影响量作用的试验
简介：This part of IEC 61298 specifies general methods and procedures for conducting tests and reporting on the functional and performance characteristics of process measurement and control devices. The tests are applicable to any such devices characterized by their own specific input and output variables, and by the specific relationship (transfer function) between the inputs and outputs, and include analogue and digital devices. For devices that require special tests, this part of IEC 61298 is to be used, together with any product-specific standard specifying special tests.This part of IEC 61298 covers tests for the effects of influence quantities.
信息：ICS：25.040.40 CCS：N10 发布：1998-02 实施：

GOST R IEC 61298-2-2015 过程测量和控制装置. 绩效评估的通用方法和程序. 第2部分. 参考条件下的试验
简介：
信息：ICS：25.040.40 CCS：A50 发布：2015 实施：2016-01-01

IEC 61298-2-2008 Dispositifs de mesure et de commande de processus – Méthodes et procédures générales d'évaluation des performances – Partie 2: Essais dans les conditions de référence (Edition 2.0)
简介：This part of IEC 61298 specifies general methods and procedures for conducting tests and reporting on the functional and performance characteristics of process measurement and control devices. The tests are applicable to any such devices characterized by their own specific input and output variables@ and by the specific relationship (transfer function) between the inputs and outputs@ and include analogue and digital devices. For devices that require special tests@ this standard should be used@ together with any product specific standard specifying special tests. This standard covers tests made under reference conditions.
信息：ICS：/ CCS：/ 发布：2008-10-01 实施：2008-10-11

IEC 61298-2-1995 Dispositifs de mesure et de commande de processus - Méthodes et procédures générales d?évaluation des performances - Partie 2: Essais dans les conditions de référence (Edition 1.0)
简介：
信息：ICS：/ CCS：/ 发布：1995-07-01 实施：2008-10-11

GOST R IEC 61298-3-2015 过程测量和控制装置. 绩效评估的通用方法和程序. 第3部分. 影响量效应的试验
简介：
信息：ICS：25.040.40 CCS：A50 发布：2015 实施：2016-01-01

IEC 61298-4-2008 Process measurement and control devices – General methods and procedures for evaluating performance – Part 4: Evaluation report content (Edition 2.0)
简介：This part of IEC 61298 specifies general methods and procedures for conducting tests@ and reporting on the functional and performance characteristics of process measurement and control devices. The tests are applicable to any such devices characterized by their own specific input and output variables@ and by the specific relationship (transfer function) between the inputs and outputs@ and include analogue and digital devices. For devices that require special tests@ this standard should be used@ together with any product specific standard specifying special tests. This standard specifies the content of the written report on the evaluation or tests on a process measurement or control device@ and the results obtained. It specifies the major items which should be included in the evaluation report@ but it does not specify the exact format in which the contents should be presented. (This is left to the discretion of the test laboratory which prepares and issues the report.)
信息：ICS：/ CCS：/ 发布：2008-10-01 实施：2008-10-11

IEC 61298-4-1995 Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content (Edition 1.0)
简介：
信息：ICS：/ CCS：/ 发布：1995-07-01 实施：2008-10-11

GOST R IEC 61298-4-2015 过程测量和控制装置. 绩效评估的通用方法和程序. 第4部分. 评估报告内容
简介：
信息：ICS：25.040.40 CCS：A50 发布：2015 实施：2016-01-01

IEC 61298-3-2008 Dispositifs de mesure et de commande de processus – Méthodes et procédures générales d'évaluation des performances – Partie 3: Essais pour la détermination des effets des grandeurs d'influence (Edition 2.0)
简介：This part of IEC 61298 specifies general methods and procedures for conducting tests and reporting on the functional and performance characteristics of process measurement and control devices. The tests are applicable to any such devices characterized by their own specific input and output variables@ and by the specific relationship (transfer function) between the inputs and outputs@ and include analogue and digital devices. For devices that require special tests@ this standard should be used@ together with any product-specific standard specifying special tests. This standard covers tests for the effects of influence quantities.
信息：ICS：/ CCS：/ 发布：2008-10-01 实施：2008-10-11

IEC 61298-1-1995 Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations (Edition 1.0)
简介：
信息：ICS：/ CCS：/ 发布：1995-07-01 实施：2008-10-11

KS C IEC 61298-2-2013
简介：
信息：ICS：25.040.40 CCS：发布：2013-11-25 实施：

IEC 61298-4-2008 过程测量和控制装置.性能评定用一般方法和程序.第4部分:评定报告的内容
简介：This part of IEC 61298 specifies general methods and procedures for conducting tests, andreporting on the functional and performance characteristics of process measurement andcontrol devices. The tests are applicable to any such devices characterized by their ownspecific input and output variables, and by the specific relationship (transfer function) betweenthe inputs and outputs, and include analogue and digital devices. For devices that requirespecial tests, this standard should be used, together with any product specific standardspecifying special tests.This standard specifies the content of the written report on the evaluation or tests on aprocess measurement or control device, and the results obtained.It specifies the major items which should be included in the evaluation report, but it does notspecify the exact format in which the contents should be presented. (This is left to thediscretion of the test laboratory which prepares and issues the report.)
信息：ICS：25.040.40 CCS：N18 发布：2008-10 实施：

IEC 61298-1-1995 过程测量和控制装置性能评定用一般方法和程序第1部分:一般考虑
简介：Specifies general methods and procedures for conducting tests, and reporting on the functional and performance characteristics of process measurement and control devices. The specified methods and procedures are applicable to any kind of test or to any t
信息：ICS：25.040.40 CCS：N10 发布：1995-07 实施：

KS C IEC 61298-3-2013
简介：
信息：ICS：25.040.40 CCS：发布：2013-11-25 实施：

IEC 61298-1-2008 过程测量和控制装置.性能评定用一般方法和程序.第1部分:一般考虑
简介：This part of IEC 61298 specifies general methods and procedures for conducting tests, andreporting on the functional and performance characteristics of process measurement andcontrol devices. The methods and procedures specified in this standard are applicable to anytype of process measurement and control device. The tests are applicable to any suchdevices characterized by their own specific input and output variables, and by the specificrelationship (transfer function) between the inputs and outputs, and include analogue anddigital devices. For devices that require special tests, this standard should be used, togetherwith any product specific standard specifying special tests.This standard covers general principles which apply to the series.
信息：ICS：25.040.40 CCS：N18 发布：2008-10 实施：

IEC 61298-2-1995 过程测量和控制装置性能评定用一般方法和程序第2部分:参考条件下的试验
简介：Specifies general methods and procedures for conducting tests and reporting on the functional and performance characteristics of process measurement and control devices.
信息：ICS：25.040.40 CCS：N18 发布：1995-07 实施：

KS C IEC 61298-2-2013
简介：
信息：ICS：25.040.40 CCS：发布：2013-11-25 实施：

IEC 61298-3-2008 过程测量和控制装置.性能评定用一般方法和程序.第3部分:影响量作用的试验
简介：This part of IEC 61298 specifies general methods and procedures for conducting tests andreporting on the functional and performance characteristics of process measurement andcontrol devices. The tests are applicable to any such devices characterized by their ownspecific input and output variables, and by the specific relationship (transfer function) betweenthe inputs and outputs, and include analogue and digital devices. For devices that requirespecial tests, this standard should be used, together with any product-specific standardspecifying special tests.This standard covers tests for the effects of influence quantities.
信息：ICS：25.040.40 CCS：N18 发布：2008-10 实施：

IEC 61298-4-1995 过程测量和控制装置性能评定用一般方法和程序第4部分:评定报告的内容
简介：Specifies the content of the written report on the evaluation or tests on a process measurement or control device, and the results obtained.
信息：ICS：25.040.40 CCS：N10 发布：1995-07 实施：

KS C IEC 61298-4-2013
简介：
信息：ICS：25.040.40 CCS：发布：2013-11-25 实施：

IEC 61298-2-2008 过程测量和控制装置.性能评定用一般方法和程序.第2部分:参考条件下的试验
简介：This part of IEC 61298 specifies general methods and procedures for conducting tests andreporting on the functional and performance characteristics of process measurement andcontrol devices. The tests are applicable to any such devices characterized by their ownspecific input and output variables, and by the specific relationship (transfer function) betweenthe inputs and outputs, and include analogue and digital devices. For devices that requirespecial tests, this standard should be used, together with any product specific standardspecifying special tests.This standard covers tests made under reference conditions.
信息：ICS：25.040.40 CCS：N18 发布：2008-10 实施：

简介： 信息：

KS C IEC 61298-4-2013
简介：
信息：ICS：25.040.40 CCS：发布：2013-11-25 实施：

KS C IEC 61298-4-2003 加工测量和控制装置.性能评估用常用方法和程序.第4部分:评定报告含量
简介：이 규격은 공정 계측 제어 기기의 기능과 성능 특성에 대한 시험과 보고서 작성을 지도하
信息：ICS：25.040.40 CCS：L30 发布：2003-12-30 实施：2003-12-30

简介： 信息：

KS C IEC 61298-1-2013
简介：
信息：ICS：25.040.40 CCS：发布：2013-11-25 实施：

KS C IEC 61298-2-2003 过程测量和控制装置.性能评估用常用方法和程序.第2部分:参考条件下的试验
简介：이 규격은 공정 계측 제어 기기의 기능과 성능 특성에 대한 시험과 보고서 작성을 지도하
信息：ICS：25.040.40 CCS：N18 发布：2003-12-30 实施：2003-12-30

简介： 信息：

KS C IEC 61298-3-2013
简介：
信息：ICS：25.040.40 CCS：发布：2013-11-25 实施：

KS C IEC 61298-1-2003 加工测量和控制装置.性能评估用常用方法和程序.第1部分:通用要求
简介：이 규격은 공정 계측 제어 기기의 기능과 성능 특성에 대한 시험과 보고서 작성을 지도하
信息：ICS：25.040.40 CCS：L30 发布：2003-12-30 实施：2003-12-30

简介： 信息：

KS C IEC 61298-1-2013
简介：
信息：ICS：25.040.40 CCS：发布：2013-11-25 实施：

简介： 信息：

DIN EN 61298-3-2009 过程测量和控制装置.通用性能评定方法和程序.第3部分:影响值作用的试验(IEC 61298-3-2008).德文版本EN 61298-3-2008
简介：
信息：ICS：25.040.40 CCS：N18 发布：2009-08 实施：2009-08-01

KS C IEC 61298-3-2003 过程测量和控制装置.性能评估用常用方法和程序.第3部分:影响量作用的测试
简介：IEC 61298의 이 부는 시험을 수행하기 위한 일반적 방법과 절차 및 공정 계측 제
信息：ICS：25.040.40 CCS：N18 发布：2003-12-30 实施：2003-12-30

简介： 信息：

DIN EN 61298-2-2009 过程测量和控制装置.通用性能评定方法和程序.第2部分:基准条件下的试验(IEC 61298-2-2008).德文版本EN 61298-2-2008
简介：
信息：ICS：25.040.40 CCS：N18 发布：2009-08 实施：2009-08-01

简介： 信息：

DIN EN 61298-4-2009 过程测量和控制装置.评估运行特性的一般方法和程序.第4部分:评估报告内容(IEC 61298-4-2008).德文版本EN 61298-4-2008
简介：
信息：ICS：25.040.40 CCS：N18 发布：2009-08 实施：2009-08-01

KS C IEC 61298-3-2003(2008) 过程测量和控制装置性能评定的一般方法和程序第3部分:影响量的影响试验
简介：
信息：ICS：25.040.40 CCS：发布：2003-12-30 实施：

简介： 信息：

DIN EN 61298-1-2009 过程测量和控制装置.通用性能评定方法和程序.第1部分:总则(IEC 61298-1-2008),德文版本EN 61298-1-2008
简介：
信息：ICS：25.040.40 CCS：N18 发布：2009-08 实施：2009-08-01

KS C IEC 61298-1-2003(2008) 过程测量和控制设备 - 用于评估性能和程序一般方法 - 第1部分:一般考虑
简介：
信息：ICS：25.040.40 CCS：发布：2003-12-30 实施：

简介： 信息：