en 1074检测标准

发布时间:2023-02-07 08:47:33 阅读量: 来源:中析研究所

en 1074相关标准参考信息

VDE 0750-2-43/A2-2018 Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures (IEC 62B/1074/CDV:2018); German and English version EN 60601-2-43:2010/prA2:2018
简介:
信息:ICS:/ CCS:/ 发布:2018-09-01 实施:2018-08-30

DS/EN 1074-1-2000
简介:This European Standard defines the minimum fitness for purpose requirements for valves to be used in, or connected to, water supply pipe systems, above or below ground, carrying water intended for human consumption.
信息:ICS:23.060.01;93.025 CCS发布:2000-11-08 实施:2000-10-03

简介: 信息:

DIN EN 1074-6-2009 供水用阀 适用性要求和相应的鉴定试验 第6部分:消防栓
简介:This European Standard defines the minimum fitness for purpose requirements for hydrants to be used in, orconnected to, water supply pipe systems, above or below ground (see EN 805), carrying water intended forhuman consumption.This European Standard specifies the design requirements, the performance requirements, and the conformityassessment method for hydrants, whatever their type, materials and functions. Where hydrants can be usedfor fire fighting, irrigation or other function, additional requirements can be given in other standards.This part of EN 1074 deals with the requirements applicable to both underground and pillar hydrants, in sizesDN 65 to DN 150, and PFA up to 16 bar.This part of EN 1074 does not give requirements for the outlets or their interface with the hydrants, since theyare subject to national standards.
信息:ICS:23.060.99 CCS:J16 发布:2009-03 实施

DS/EN 1074-2-2000
简介:This European Standard defines the minimum fitness for purpose requirements for isolating valves to be used in, or connected to water supply pipe systems, above or below ground, carrying water intended for human consumption.
信息:ICS:23.060.99;93.025 CCS发布:2000-11-08 实施:2000-10-03

简介: 信息:

LST EN 1074-6-2009
简介:
信息:ICS:23.060.99 CCS发布:2009-02-27 实施:2009-02-27

DS/EN 1074-3-2000
简介:This European Standard defines the minimum fitness for purpose requirements for check valves to be used in, or connected to, water supply systems, above or below ground, carrying water intended for human consumption.
信息:ICS:23.060.50;93.025 CCS发布:2000-11-08 实施:2000-10-03

简介: 信息:

BS EN 1074-6-2008 供水用阀门.目的要求和适当检定试验的合理性.消防栓
简介:This European Standard defines the minimum fitness for purpose requirements for hydrants to be used in, orconnected to, water supply pipe systems, above or below ground (see EN 805), carrying water intended forhuman consumption.This European Standard specifies the design requirements, the performance requirements, and the conformityassessment method for hydrants, whatever their type, materials and functions. Where hydrants can be usedfor fire fighting, irrigation or other function, additional requirements can be given in other standards.This part of EN 1074 deals with the requirements applicable to both underground and pillar hydrants, in sizesDN 65 to DN 150, and PFA up to 16 bar.This part of EN 1074 does not give requirements for the outlets or their interface with the hydrants, since theyare subject to national standards.
信息:ICS:23.060.99 CCS:J16 发布:2009-01-31 实施:2009-01-31

DS/EN 1074-4-2000
简介:This European Standard specifies the minimum fitness for purpose requirements for valves to be used in, or connected to, water supply pipe systems above or below ground, carrying water intended for human consumption.
信息:ICS:93.025 CCS发布:2000-10-09 实施:2000-09-15

简介: 信息:

DS/EN 1074-6-2009
简介:This European Standard defines the minimum fitness for purpose requirements for hydrants to be used in, or connected to, water supply pipe systems, above or below ground (see EN 805), carrying water intended for human consumption.This European Standard specifies the design requirements, the performance requirements, and the conformity assessment method for hydrants, whatever their type, materials and functions. Where hydrants can be used for fire fighting, irrigation or other function, additional requirements can be given in other standards.This part of EN 1074 deals with the requirements applicable to both underground and pillar hydrants, in sizes DN 65 to
信息:ICS:93.025 CCS发布:2009-01-12 实施:2009-01-12

DIN EN 1074-4-2000 供水用阀门.目的要求适用性和适用验证试验.第4部分:空气阀
简介:The document specifies the fitness for purpose and certification requirements for float type air valves and purgers having nominal pressures of PN 6, PN 10, PN 16, PN 25 and all diamters as specified in prEN 1074-1 but limited to a maximum of DN 300.,,
信息:ICS:23.060.10 CCS:J16 发布:2000-10 实施

简介: 信息:

EN 1074-6-2008 供水用阀门.适用性要求和合适的验证试验.第6部分:消防栓
简介:This European Standard definesThe minimum fitness for purpose requirements for hydrants to be used in, or connected to, water supply pipe systems, above or below ground (see EN 805), carrying water intended for human consumption.This European Standard specifies the design requirements,The performance requirements, andThe conformity assessment method for hydrants, whateverTheir type, materials and functions. Where hydrants can be used for fire fighting, irrigation or other function, additional requirements can be given in other standards.This part of EN 1074 deals withThe requirements applicable to both underground and pillar hydrants, in sizes DN 65 to DN 150, and PFA up to 16 bar.This part of EN 1074 does not give requirements forThe outlets orTheir interface withThe hydrants, sinceThey are subject to national standards.
信息:ICS:23.060.99 CCS发布:2008 实施

BS EN 1074-4-2000 供水系统用的阀门.产品与用途要求的适用性和合适的验证试验.空气阀
简介:This European Standard specifies the minimum fitness for purpose requirements for valves to be used in, or connected to, water supply pipe systems above or below ground (see EN 805), carrying water intended for human consumption.This standard specifies the design requirements, the performance requirements, and the conformity assessment method for valves, whatever their type and materials.This standard applies in priority to any other product or test standard: the requirements from other standards apply only when this standard refers to them.This standard deals with the requirements applicable to air valves with DN up to DN 300 and PFA 6 to PFA 25.
信息:ICS:23.060.10 CCS:J16 发布:2000-09-15 实施:2000-09-15

简介: 信息:

DS/EN 1074-2/A1-2004
简介:This European Standard defines the minimum fitness for purpose requirements for isolating valves to be used in, or connected to water supply pipe systems, above or below ground, carrying water intended for human consumption.
信息:ICS:23.060.99;93.025 CCS发布:2004-08-13 实施:2004-07-09

BS EN 1074-2-2000 供水用阀门.对目的要求的符合性及合适的验证试验.截止阀
简介:This European Standard defines the minimum fitness for purpose requirements for isolating valves to be used in, or connected to, water supply pipe systems, above or below ground (see EN 805), carrying water intended for human consumption.This standard specifies the design requirements, the performance requirements, and the conformity assessment method for isolating valves, whatever their type and materials.This standard applies in priority to any other product or test standard: the requirements from other standards apply only when this standard refers to them.This part of the standard deals with the requirements applicable to isolating valves up to DN 2 000 and PFA 6 bar to PFA 25 bar.
信息:ICS:23.060.01 CCS:J16 发布:2000-07-15 实施:2000-07-15

简介: 信息:

DIN EN 1074-2-2004 供水用阀门.适用性要求和适当的验证试验.第2部分:隔离阀
简介:
信息:ICS:23.060.01 CCS:J16 发布:2004-07 实施

BS EN 1074-1-2000 供水用阀门.对目的要求的符合性及合适的验证试验.一般要求
简介:This European Standard defines the minimum fitness for purpose requirements for valves to be used in, or connected to, water supply pipe systems, above or below ground (see EN 805), carrying water intended for human consumption.This standard specifies the general design requirements, the performance requirements and the conformity assessment method for valves, whatever their type and materials.This standard deals with the requirements that are common to several types of valves; it is applicable only when quoted as reference in one of the other parts of this standard.
信息:ICS:23.060.01;91.140.60 CCS:J16 发布:2000-07-15 实施:2000-07-15

简介: 信息:

LST EN 1074-2-2000/A1-2004
简介:
信息:ICS:23.060.01 CCS发布:2004-05-25 实施:2004-05-25

BS EN 1074-3-2000 供水用阀门.对目的要求的符合性及合适的验证试验.止回阀
简介:This European Standard defines the minimum fitness for purpose requirements for check valves to be used in, or connected to, water supply pipe systems, above or below ground (see EN 805), carrying water intended for human consumption.This standard specifies the design requirements, the performance requirements, and the conformity assessment method for check valves, whatever their type and materials.This standard applies in priority to any other product or test standard: the requirements from other standards apply only when this standard refers to them.This standard deals with the requirements applicable to check valves up to DN 2 000 and PFA 6 bar to PFA 25 bar. It does not apply to anti-pollution check valves which are covered by other standards.
信息:ICS:23.060.50 CCS:J16 发布:2000-07-15 实施:2000-07-15

简介: 信息:

BS EN 1074-6-2004 供水用阀门.目的要求和适当检定试验的合理性.给水栓
简介:This European Standard defines the minimum fitness for purpose requirements for hydrants to be used in, or connected to, water supply pipe systems, above or below ground (see EN 805), carrying water intended for human consumption.This standard specifies the design requirements, the performance requirements, and the conformity assessment method for hydrants, whatever their type, materials and functions. Where hydrants can be used for fire fighting, irrigation or other function, additional requirements can be given in other standards (e.g. prEN 14339:2001).This standard applies in priority to any other product or test standard. The requirements from other standards apply only when this European Standard refers to them.This part of EN 1074 deals with the requirements applicable to both underground and pillar hydrants, in sizes DN 65 to DN 150, and PFA up to 16 bar.This part of EN 1074 does not give requirements for the outlets or their interface with the hydrants, since they are subject to national standards.
信息:ICS:23.060.99 CCS:J16 发布:2004-02-05 实施:2004-02-05

EN 1074-4-2000 供水用阀门.适用性要求和合适的验证试验.第4部分:气体阀门
简介:The document specifies the fitness for purpose and certification requirements for float type air valves and purgers having nominal pressures of PN 6, PN 10, PN 16, PN 25 and all diamters as specified in prEN 1074-1 but limited to a maximum of DN 300
信息:ICS:23.060.10 CCS发布:2000-07-01 实施

简介: 信息:

EN 1074-6-2004 供水用阀门.适用性要求和合适的验证试验.第6部分:消防栓
简介:
信息:ICSCCS发布:2004-01-01 实施

DIN EN 1074-3-2000 供水用阀门.目的要求和专用检查试验的合理性.第3部分:止回阀
简介:The document specifies the fitness for purpose and certification requirements for check valves used for water supply.
信息:ICS:23.060.50 CCS:J16 发布:2000-07 实施

简介: 信息:

LST EN 1074-4-2002
简介:
信息:ICS:23.060.99;91.140.60 CCS发布:2002-09-01 实施:2002-09-01

DIN EN 1074-1-2000 供水用阀门.适用性要求和专用验证试验.第1部分:一般要求
简介:The document covers valves used in the treatment, transportation and distribution of water. It specifies general specifications for use and appropriate verification tests.,,
信息:ICS:23.060.01;91.140.60 CCS:J16 发布:2000-07 实施

简介: 信息:

LST EN 1074-5-2002
简介:
信息:ICS:23.060.40 CCS发布:2002-09-01 实施:2002-09-01

EN 1074-3-2000 供水用阀门.适用性要求和合适的验证试验.第3部分:止回阀
简介:This European Standard definesThe minimum fitness for purpose requirements for check valves to be used in, or connected to, water supply pipe systems, above or below ground (see EN 805), carrying water intended for human consumption.This standard specifies the design requirements,The performance requirements, andThe conformity assessment method for check valves, whateverTheir type and materials.This standard applies in priority to any other product or test standard:the requirements from other standards apply only whenThis standard refers toThem.This standard deals withThe requirements applicable to check valves up to DN 2 000 and PFA 6 bar to PFA 25 bar. It does not apply to anti-pollution check valves which are covered by other standards.
信息:ICS:23.060.50 CCS发布:2000-04-01 实施

简介: 信息:

DS/EN 1074-5-2001
简介:This European Standard defines the minimum fitness for purpose requirements for automatic control valves providing a regulation function to be used in, or connected to, water supply pipe systems, above or below ground, carrying water intended for human consumption.
信息:ICS:23.060.99;93.025 CCS发布:2001-08-07 实施:2001-06-19

EN 1074-2-2000 供水用阀门.适用性要求和合适的验证试验.第2部分:隔离阀;包含修改件A1-2004
简介:This European Standard definesThe minimum fitness for purpose requirements for isolating valves to be used in, or connected to, water supply pipe systems, above or below ground (see EN 805), carrying water intended for human consumption.This standard specifies the design requirements,The performance requirements, andThe conformity assessment method for isolating valves, whateverTheir type and materials.This standard applies in priority to any other product or test standard:the requirements from other standards apply only whenThis standard refers toThem.This part of the standard deals withThe requirements applicable to isolating valves up to DN 2 000 and PFA 6 bar to PFA 25 bar.
信息:ICS:23.060.01 CCS发布:2000-04-01 实施

简介: 信息:

DIN EN 1074-5-2001 供水阀门.适用性要求和适配试验.第5部分:控制阀门
简介:
信息:ICS:23.060.40 CCS:J16 发布:2001-04 实施

EN 1074-1-2000 供水用阀门.适用性要求和合适的验证试验.第1部分:一般要求
简介:This European Standard definesThe minimum fitness for purpose requirements for valves to be used in, or connected to, water supply pipe systems, above or below ground (see EN 805), carrying water intended for human consumption.This standard specifies the general design requirements,The performance requirements andThe conformity assessment method for valves, whateverTheir type and materials.This standard deals withThe requirements that are common to several types of valves; it is applicable only when quoted as reference in one of the other parts of this standard.
信息:ICS:23.060.01.91.140.60 CCS发布:2000-04-01 实施

简介: 信息:

BS EN 1074-5-2001 供水阀门.与用途要求的适用性和合适的验证试验.控制阀门
简介:This European Standard defines the minimum fitness for purpose requirements for automatic control valves providing a regulation function to be used in, or connected to, water supply pipe systems, above or below ground (see EN 805), carrying water intended for human consumption.This standard specifies the design requirements, the performance requirements and the conformity assessment method for control valves, whatever their type and materials.This standard applies in priority to any other product or test standard: the requirements from other standards apply only when this standard refers to them.This part of EN 1074 deals with the requirements applicable to control valves up to DN 2000 and PFA 6 bar to PFA 25 bar.This part of EN 1074 does not deal with the specific performances of the controlling system accessories, whether they be integrated or not, nor with the other components of such control systems e.g. pressure sensors, flow meters, level detectors, regulating devices, powered actuators, etc.Control valves manufactured in accordance with this standard are not intended for buried service.
信息:ICS:23.060.40 CCS:J16 发布:2001-03-15 实施:2001-03-15

简介: 信息:

简介: 信息:

EN 1074-5-2001 供水用阀门.适用性要求和合适的验证试验.第5部分:控制阀门
简介:This European Standard definesThe minimum fitness for purpose requirements for automatic control valves providing a regulation function to be used in, or connected to, water supply pipe systems, above or below ground (see EN 805), carrying water intended for human consumption.This standard specifies the design requirements,The performance requirements andThe conformity assessment method for control valves, whateverTheir type and materials.This standard applies in priority to any other product or test standard:the requirements from other standards apply only whenThis standard refers toThem.This part of EN 1074 deals withThe requirements applicable to control valves up to DN 2000 and PFA 6 bar to PFA 25 bar.This part of EN 1074 does not deal withThe specific performances of the controlling system accessories, whetherThey be integrated or not, nor withThe other components of such control systems
信息:ICS:23.060.40 CCS发布:2001-01-01 实施

简介: 信息:

简介: 信息:

LST EN 1074-1-2000
简介:
信息:ICS:91.140.60;23.060.01 CCS发布:2000-12-15 实施:2000-12-15

简介: 信息:

简介: 信息:

LST EN 1074-2-2000
简介:
信息:ICS:23.060.01 CCS发布:2000-12-04 实施:2000-12-04

简介: 信息:

简介: 信息:

LST EN 1074-3-2000
简介:
信息:ICS:23.060.50 CCS发布:2000-12-04 实施:2000-12-04

简介: 信息:

简介: 信息:

检测标准 en 1074检测标准

检测资质

权威认证,确保检测数据的准确性和可靠性

CMA认证

CMA认证

中国计量认证

CNAS认证

CNAS认证

中国合格评定国家认可委员会

ISO认证

ISO认证

质量管理体系认证

行业资质

行业资质

多项行业权威认证

了解我们

专业团队,丰富经验,为您提供优质的检测服务

了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们

先进检测设备

引进国际先进仪器设备,确保检测数据的准确性和可靠性

精密检测仪器

精密光谱分析仪

用于材料成分分析和元素检测,精度可达ppm级别

色谱分析仪器

高效液相色谱仪

用于食品安全检测和化学成分分析,分离效率高

材料测试设备

万能材料试验机

用于材料力学性能测试,可进行拉伸、压缩等多种测试

热分析仪器

差示扫描量热仪

用于材料热性能分析,测量相变温度和热焓变化

显微镜设备

扫描电子显微镜

用于材料微观结构观察,分辨率可达纳米级别

环境检测设备

气相色谱质谱联用仪

用于复杂有机化合物的分离和鉴定,灵敏度高

我们的优势

选择中科光析,选择专业与信赖

权威资质

具备CMA、CNAS等多项国家级资质认证,检测报告具有法律效力

先进设备

引进国际先进检测设备,确保检测数据的准确性和可靠性

专业团队

拥有经验丰富的检测工程师和技术专家团队

快速响应

7×24小时服务热线,快速响应客户需求,及时出具检测报告

需要专业检测服务?

我们的专业技术团队随时为您提供咨询和服务支持,欢迎随时联系我们

在线咨询工程师

定制实验方案

24小时专业客服在线

需要检测服务?

专业工程师在线解答

400-640-9567

全国服务热线

查看报告模版