荣誉资质图片

cma资质(CMA)     CNAS资质(CNAS)     iso体系(ISO) 高新技术企业(高新技术企业)

din 1988相关标准参考信息

DIN 1988-600-2021
简介:This standard specifies the planning, construction, operation, changing and maintenance of the drinking water installations from the connecting point to connector of fire water to fire-fighting and fire protection installation as well as underground and pillar fire hydrant system
信息:ICS:13.060.20 CCS发布:2021-07-00 实施

DIN 4000-19-1988 第19部分:晶体管和可控硅用物品特性表格设计
简介:This standard deals with transistors and thyristors. Tabular layouts of article characteristics make it possible that standardized and non-standardized articles which are similar to each other can be grouped, fined and selected.,,
信息:ICS:21.020 CCS:L41 发布:1988-12-01 实施

DIN 51509-2-1988 润滑剂.齿轮传动用润滑剂的选择.第2部分:半流体润滑剂
简介:
信息:ICS:75.100 CCS:E30 发布:1988-12 实施

DIN 1988-500-2021 饮用水装置实施规范. 第500部分: 带有 RPM 调节泵的增压站
简介:This standard specifies criteria for design and construction of pressure boosting stations with RPM-regulated pumps in drinking water installations inside buildings to ensure failure-free and economic operation.
信息:ICS:13.060.20 CCS发布:2021-05-01 实施

DIN 4000-18-1988 第18部分:半导体二极管用物品特性表格设计
简介:
信息:ICS:21.020 CCS:L41 发布:1988-12-01 实施

DIN 15560-40-1988 电影、电视摄影棚、舞台和摄影用放映机.第40部分:舞台和摄影棚放映机用滤色器比色参数
简介:
信息:ICS:97.200.10 CCS:K73 发布:1988-12 实施

DIN 1988-300-2012 饮用水设施的使用法规.第300部分:管道尺寸,DVGW 使用法规
简介:
信息:ICS:91.140.60 CCS:Q81 发布:2012-05-01 实施

DIN 44717-1988 手持的电机控制的电动工具.排气套管.连接尺寸
简介:This standard applies to hand-held electric tools whose directly or indirectly operated machine tools produce dust during their operation. It specifies the dimensions of the exhaust spigots for connection of exhaust tubes.
信息:ICS:4200 CCS:K64 发布:1988-12 实施

DIN 5042-7-1988 燃气灯和煤气灯.第7部分:固定喷嘴
简介:This standard deals with fixed nozzles for gas lamps and states in detail: outer dimensions, internal and external threads, tolerances, materials to be used and inside diameter.,,
信息:ICS:91.160.00 CCS:P31 发布:1988-12 实施

DIN 1988-200-2012 饮水装置实用规程. 第200部分: 安装类型A(封闭系统). 计划, 部件, 器械, 材料; DVGW实用规程
简介:
信息:ICS:93.025 CCS:C53 发布:2012-05 实施

DIN 6809-4-1988 临床剂量.第4部分:放射疗法和软组织诊断中峰值电压 10 - 100 kV X 射线的应用
简介:The definitions of the energy dose for water as a measured quantity for the entire sector of radiotherapy gives rises to practical problems when implemented for dosimetry of soft X-rays, as the flat chambers which are commonly used in this energy range cannot be applied to a water phantom. For this reason, the ionization chamber is inserted into the surface region of a solid-state phantom.
信息:ICS:17.240 CCS:C43 发布:1988-12 实施

DIN 6809-4-1988 临床剂量.第4部分:放射疗法和软组织诊断中峰值电压 10 - 100 kV X 射线的应用
简介:The definitions of the energy dose for water as a measured quantity for the entire sector of radiotherapy gives rises to practical problems when implemented for dosimetry of soft X-rays, as the flat chambers which are commonly used in this energy range cannot be applied to a water phantom. For this reason, the ionization chamber is inserted into the surface region of a solid-state phantom.
信息:ICS:17.240 CCS:C43 发布:1988-12 实施

DIN 1988-100-2011 饮用水设施的实施规程.第100部分:饮用水保护,饮用水质量监控;DVGW惯例
简介:
信息:ICS:93.025 CCS:Q81 发布:2011-08 实施

DIN 65167-1988 航空航天.直流28V.5A.2和4极极化单稳态插入式继电器
简介:This standard contains the dimensions and masses of plug-in relays 28 VDC, 5 Amp.,,
信息:ICS:49.060 CCS:V25 发布:1988-12 实施

DIN 23011-8-1988 选煤.选煤设备.选煤设备工艺技术要求
简介:
信息:ICS:73.120 CCS:D96 发布:1988-12 实施

DIN 1988-500-2011 饮用水设施的实施规程.第500部分:带脉冲重复率调制(PRM)调控泵的压力助推站.DVGW实施规程
简介:
信息:ICS:13.060.20;91.140.60 CCS:Q81 发布:2011-02 实施

DIN ISO 7030-1988 道路车辆.12,13,14,15,16,17,18 和19 型 螺旋拧入式喷嘴固定架
简介:
信息:ICS:43.060.40 CCS:T13;J94 发布:1988-12 实施

DIN 44717-1988 手持的电机控制的电动工具.排气套管.连接尺寸
简介:This standard applies to hand-held electric tools whose directly or indirectly operated machine tools produce dust during their operation. It specifies the dimensions of the exhaust spigots for connection of exhaust tubes.
信息:ICS:4200 CCS:K64 发布:1988-12 实施

DIN 1988-600-2010 饮用水装置的实施规程.第600部分:与消防和防火装置相关的饮用水装置; DVGW实施规程
简介:
信息:ICS:13.060.20;91.140.60 CCS:Q81 发布:2010-12 实施

DIN 862-1988 游标卡尺.要求和试验
简介:This standard specifies dimensional, functional and quality characteristics of vernier callipers reading to 0,1,0,05 and 0,02 mm with a maximum range of 2000 mm and vernier callipers with digital indication reading 0,01 mm. Methods for testing the accuracy of the instrument are given.
信息:ICS:17.040.30 CCS:J42 发布:1988-12 实施

DIN 55189-1-1988 机床.静态负荷下板金加工冲压参数的测定.第1部分:机械冲压机
简介:
信息:ICS:25.120.10 CCS:J62 发布:1988-12 实施

DIN 1988-500-2010 饮用水设施的实施规程(TRWI).第500部分:带PRM-调控泵的压力助推站.DVGW实施规程
简介:
信息:ICS:13.060.20;91.140.60 CCS发布:2010-10 实施

DIN 5042-7-1988 燃气灯和煤气灯.第7部分:固定喷嘴
简介:This standard deals with fixed nozzles for gas lamps and states in detail: outer dimensions, internal and external threads, tolerances, materials to be used and inside diameter.,,
信息:ICS:91.160.00 CCS:P31 发布:1988-12 实施

DIN 65078-1988 航空航天.用有机溶剂进行清洗.代号0014
简介:This standard is used for cleaning of components with organic solvents. It covers the practice, requirements, inspections and tests. It corresponds to code number 0014 according to LN 9368 part 2.
信息:ICS:1010 CCS:V55 发布:1988-12 实施

VDE 0816-3 BERICHTIGUNG 2-2010 External cables for telecommunication and data processing systems - Paper insulated cables@ Corrigendum to DIN VDE 0816-3 (VDE 0816-3):1988-02
简介:
信息:ICS:/ CCS:/ 发布:2010-04-01 实施:2016-06-25

DIN 16927-1988 非增塑聚氯乙烯板.交货技术条件
简介:This standard contains the technical delivery specifications (requirements and test methods) for normal impact unplasticized polyvinylchloride (PVC-U) and raised impact unplasticized polyvinylchloride (PVC-RI) sheets.
信息:ICS:83.140.10 CCS:G33 发布:1988-12 实施

DIN 1988-1-1988 饮用水设施的技术法规(TRWI).通用的DVGW技术法规
简介:The standard settles the responsibilities for planning, construction and operation of drinking water installations, it defines important terms and gives the abbreviations and graphic symbols to use in drawings and plans.
信息:ICS:93.025 CCS:P40 发布:1988-12 实施

DIN VDE 0816-3 Berichtigung 2-2010 电信和数据处理系统用室外电缆.纸绝缘电缆.技术勘误DIN VDE 0816-3 (VDE 0816-3)-1988
简介:
信息:ICS:33.120.20 CCS:K13 发布:2010-04 实施

DIN 23011-8-1988 选煤.选煤设备.选煤设备工艺技术要求
简介:
信息:ICS:73.120 CCS:D96 发布:1988-12 实施

DIN 65300-1988 航空航天.旋转轴用长期润滑的滚针轴承支承的万向节.技术规范
简介:This technical specification applies to needle bearing supported, long-time lubricated, universal joints for rotary shafts according to DIN 65298 and DIN 65299.
信息:ICS:3530 CCS:V22 发布:1988-12 实施

DIN EN 60255-6 Berichtigung 1-2008 继电器.第6部分:测量继电器和保护设备(修改的IEC 60255-6-1988).技术勘误DIN EN 60255-6(VDE 0435-301)-1994-11
简介:
信息:ICS:29.120.70 CCS:L25 发布:2008-11 实施

DIN 65604-1988 航空航天.专用检验装置.颜色标识
简介:This standard covers the colour identification of special gauging facilities used in the aerospace industry. Its purpose is to unambignously identify the aircraft model and gauge type.
信息:ICS:1050 CCS:V08;V92 发布:1988-12 实施

DIN 1988-2 Bb.1-1988 饮用水设施惯例(TRWI).材料.零部件和装置标准及其他惯例汇编.DVGW惯例
简介:
信息:ICS:93.025 CCS:P40;Q81 发布:1988-12 实施

DIN 1988-7-2004 钢管和圆钢棒制作套筒螺母
简介:The standard describes the measures to take for construction and operation of drinking water installations to keep down the rate of corrosion of the materials and the calcareous deposit.
信息:ICS:93.025 CCS:P40 发布:2004-12 实施

DIN 108-7-1988 幻灯放映机和幻灯片.字幕片放映机.第7部分:孔径区、定位销、银幕、评价
简介:The standard specifies the dimensions, adjustments and the projection aids for overhead projectors of the types A, B and C which allow the compazibility between overhead projectors and the transparencies.
信息:ICS:37.040.10 CCS:N45 发布:1988-12 实施

DIN 1988-3-1988 饮用水供水系统.管径的确定(DVGW惯例 )
简介:The standard gives the basis and the methods for the calculation of the pipe diameters of drinking water installations in buildings and properties.
信息:ICS:93.025 CCS:P40;Q81 发布:1988-12 实施

VDE 0816-3 BERICHTIGUNG 1-2002 Corrigenda to DIN VDE 0816-3 (VDE 0816 Teil 3):1988-02
简介:
信息:ICS:/ CCS:/ 发布:2002-11-01 实施:2016-06-25

DIN 8349-1988 锉和粗锉.锉齿数量
简介:This standard includes the coarseness of cut for engineers' files, taper saw files, mill files, rasps and for files with milled teeth.,,
信息:ICS:25.140.30 CCS:J47 发布:1988-12 实施

DIN 1988-4-1988 饮用水设施的技术规范(TRWI).饮用水保护.饮水质量维护.DVGW技术规范
简介:The standard gives the safety devices and measures for drinking water installations, which serve the protection of the drinking water and the preservation of the drinking water quality.,,
信息:ICS:13.060.10 CCS:P40;Q81 发布:1988-12 实施

VDE 0816-1 BERICHTIGUNG 1-2002 Corrigenda to DIN VDE 0816-1 (VDE 0816 Teil 1):1988-02
简介:
信息:ICS:/ CCS:/ 发布:2002-11-01 实施:2016-06-25

DIN 65168-1988 航空航天.直流28V.10A.1和3极极化单稳态插入式继电器
简介:
信息:ICS:49.060 CCS:V25 发布:1988-12 实施

DIN 1988-5-1988 饮用水的供水系统.第5部分:增压和减压(DVGW 使用法规)
简介:
信息:ICS:13.060.10 CCS:P40;Q81 发布:1988-12 实施

DIN VDE 0816-3 Berichtigung 1-2002 DIN VDE 0816-3 技术勘误 (VDE 0816 Teil 3):1988-02
简介:
信息:ICS:33.120.20 CCS:L91 发布:2002-11 实施

DIN 51562-2-1988 粘度测量.用余白罗德(Ubberlohde)粘度计测量运动粘度.微型余白罗德(Ubberlohde)粘度计
简介:The standard describes the measurement of kinematic viscosity with the micro Ubbelohde viscometer.
信息:ICS:17.060 CCS:N51 发布:1988-12 实施

DIN 65183-1988 航空航天.为测定有机涂层耐侵蚀性能进行的雨水试验
简介:This standard is used for rain testing of organic coating for the determination of the resistance of erosion. Testing is performed by means of two rotating arms, rading 1,2 m, at a pressure of 20 m bar.,,
信息:ICS:5905 CCS:A29;V13 发布:1988-12 实施

DIN VDE 0816-1 Berichtigung 1-2002 DIN VDE 0816-1 技术勘误 (VDE 0816 Teil 1):1988-02
简介:
信息:ICS:33.120.20 CCS:L91 发布:2002-11 实施

DIN 108-17-1988 幻灯放映机和幻灯片.字幕片放映机.第17部分:透明胶片、透明度、放映辅助设备
简介:The standard specifies the dimensions for unframed and framed transparencies including all projection aids for overhead projectors of the types A, B and C according to DIN 108 part 7, allowing the compatibility between the overhead projectors and the transparencies.
信息:ICS:37.040.10 CCS:N45 发布:1988-12 实施

DIN 65298-1988 航空航天.旋转轴用长期润滑的滚针轴承支承的万向节.单接点.连接尺寸.负荷.质量
简介:
信息:ICS:3530 CCS:V22 发布:1988-12 实施

DIN 1988-6-2002 饮用水装置实用规程(TRWI).第6部分:消防和防火装置、DVGW实用规程
简介:The document settles the planning, the construction and operation of fire fighting and fire protection installations, which are combined with a drinking water installation. It describes mainly the different types of these plants and gives the corresponding requirements.
信息:ICS:13.220.20;91.140.60 CCS:P41 发布:2002-05 实施

DIN 4663-1988 压缩气容器.无缝铝合金气瓶.额定压力为250巴和300巴试验压力
简介:
信息:ICS:23.020.30 CCS:J74 发布:1988-12 实施

DIN 65080-1988 航空航天.铝和铝合金的硷浸洗.代号0110
简介:This standard is used for alkaline pickling of aluminium and aluminium-alloys. It covers the practice, requirements, inspections and tests. It corresponds to code number 0110 according to LN 9368 part 2.
信息:ICS:3320 CCS:A29;V10 发布:1988-12 实施

DIN EN 1988-2-1998 食品.亚硫酸盐的测定.第2部分:酶催化法
简介:The document specifies an enzymatic method for the determination of sulfite in foodstuffs.
信息:ICS:67.050 CCS:X04 发布:1998-05 实施

DIN 4000-20-1988 第20部分:光电子半导体元件用物品特性表格设计
简介:
信息:ICS:21.020 CCS:L50 发布:1988-12 实施

DIN 38405-14-1988 德国检验水、废水和污泥的标准方法.阴离子(D 组).第14部分:用低度污染标准(D 14)对饮用水、地下水和地面水含氰化物的测定
简介:The standard describes a chemical methods for the determination of cyanides in drinking water. The principle of the method is a decomposition of the cyanide compounds by hydrochloric acid, a separation of the hydrogen cyanide and the following photometric determination of the cyanide.,,
信息:ICS:13.060.40 CCS:Z16;P41 发布:1988-12 实施

DIN EN 1988-1-1998 食品.亚硫酸盐的测定.第1部分:优化的莫尼-威廉法(Monier-Williams)
简介:The document specifies a destillative method (Monier-Williams) for the determination of sulfite in foodstuffs.
信息:ICS:67.050 CCS:X04 发布:1998-05 实施

DIN 4000-23-1988 第23部分:钢铁用物品特性表格设计
简介:
信息:ICS:21.020 CCS:H40 发布:1988-12 实施

DIN 65230-1988 航空航天.马氏体硬化不锈钢阳极抛光.代号2600
简介:This standard is used for anodic polishing of maraging stainless steels. It covers the practice, requirements, inspections and tests. It corresponds to code number 2600 according to LN 9368 part 4.
信息:ICS:49.025.10 CCS:V10;A29 发布:1988-12 实施

VDI/VDE/DGQ 2618 Blatt 10-1991 Pruefanweisung fuer Hoehenmessschieber (in Anlehnung an DIN 862:1988-12)
简介:
信息:ICS:/ CCS:/ 发布:1991-01-01 实施:2011-05-10

DIN IEC 60487-2-3-1988 地面无线电中继系统设备测量方法.第2部分:分系统测量.第3节:射频分支网络
简介:The standard gives methods of measurement for the linear and non-linear characteristics of r.f. branching networks for radio-relay receivers and transmitters.
信息:ICS:33.060.30 CCS:M74;M36 发布:1988-12 实施

DIN 862-1988 游标卡尺.要求和试验
简介:This standard specifies dimensional, functional and quality characteristics of vernier callipers reading to 0,1,0,05 and 0,02 mm with a maximum range of 2000 mm and vernier callipers with digital indication reading 0,01 mm. Methods for testing the accuracy of the instrument are given.
信息:ICS:17.040.30 CCS:J42 发布:1988-12 实施

我们的实力

我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力 我们的实力

部分实验仪器

实验仪器 实验仪器 实验仪器 实验仪器

合作客户

我们的实力

注意:因业务调整,暂不接受个人委托测试望见谅。