EN485检测标准
EN485相关标准参考信息
DIN EN 485-2-2016 铝和铝合金.片材、带材和板材.第2部分:机械特性.德文版本EN 485-2-2016
简介：
信息：ICS：77.150.10 CCS：H61 发布：2016-10 实施：
DIN EN 485-1-2008 铝和铝合金.薄板材、带材和厚板材.第1部分:检验和交货技术条件
简介：This document specifies the technical conditions for inspection and delivery of wrought aluminium and wroughtaluminium alloy sheet, strip and plate for general engineering applications. It also includes provision for orderingand testing.It applies to products with a thickness over 0,20 mm up to and including 400 mm.It does not directly apply to semi-finished rolled products in coiled form to be subjected to further rolling (rerollstock) or to special applications such as aerospace, can stock, finstock, etc. which are dealt with in separateEuropean Standards.NOTE Most of these specific standards refer for some provisions to the present standard.
信息：ICS：77.150.10 CCS：H61 发布：2008-06 实施：
EN 300 485-2001
简介：Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Services and Protocols for Advanced Networks (SPAN).
信息：ICS：/ CCS：/ 发布：2001-01-01 实施：2014-04-18
DIN EN 485-1-2016 铝和铝合金.薄板材、带材和厚板材.第1部分:检验和交货技术条件.德文版本EN 485-1-2016
简介：
信息：ICS：77.150.10 CCS：H61;H04 发布：2016-10 实施：
BS EN 485-1-2008 铝和铝合金.薄板材、带材和厚板材.检验和交货技术条件
简介：This document specifies the technical conditions for inspection and delivery of wrought aluminium and wroughtaluminium alloy sheet, strip and plate for general engineering applications. It also includes provision for orderingand testing.It applies to products with a thickness over 0,20 mm up to and including 400 mm.It does not directly apply to semi-finished rolled products in coiled form to be subjected to further rolling (rerollstock) or to special applications such as aerospace, can stock, finstock, etc. which are dealt with in separateEuropean Standards.NOTE Most of these specific standards refer for some provisions to the present standard.
信息：ICS：77.150.10 CCS：H61 发布：2008-05-30 实施：2008-05-30
DS/EN 485-4-2000
简介：This part of EN 485 specifies the tolerances on shape and dimensions for wrought aluminium and aluminium alloy sheet, strip and plate obtained by cold-rolling, for general engineering applications.
信息：ICS：77.150.10 CCS： 发布：2000-10-09 实施：2000-08-30
DIN EN 485-2-2016 铝和铝合金.片材、带材和板材.第2部分:机械特性.德文版本EN 485-2-2016
简介：
信息：ICS：77.150.10 CCS：H61 发布：2016-10 实施：
BS EN 485-1-2008+A1-2009 铝和铝合金.薄板材、带材和厚板材.检验和交货技术条件
简介：This document specifies the technical conditions for inspection and delivery of wrought aluminium and wrought aluminium alloy sheet, strip and plate for general applications. It also includes provisions for ordering and testing.It applies to products with a thickness over 0,20 mm up to and including 400 mm.deleted textFor many special applications of aluminium strip, sheet and plate, specific European Standards exist, where different or additional requirements are formulated and the appropriate alloys and tempers are selected: see Annex A. Most of these special European Standards refer to provisions of this document.The selection of the relevant special European Standards is under the responsibility of the purchaser.Whenever the application involves special properties, such as corrosion resistance, toughness, fatigue strength, surface appearance and welding properties, the user should consult the supplier and consider the relevant special European Standard, as applicable.
信息：ICS：77.150.10 CCS：H61 发布：2008-05-30 实施：2008-05-30
ETSI EN 301 485-1-2000 宽带综合业务数字网(B-ISDN).2号数字用户信令系统(DSS2)协议.号码识别补充业务对ATM末端系统寻址格式的支持.第1部分:协议规范(版本1.1.1).ITU-T建议
简介：
信息：ICS： CCS：M21 发布：2000-09-01 实施：
BS EN 485-2-2016 铝和铝合金.薄板材、带材和厚板材.机械性能
简介：
信息：ICS：77.150.10 CCS：H61 发布：2016-08-31 实施：2016-08-31
BS EN 485-1+A1-2008
简介：
信息：ICS：77.150.10 CCS： 发布：2008-05-30 实施：2008-05-30
EN 300 485-2000
简介：Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Services and Protocols for Advanced Networks (SPAN)@ and is now submitted for the Public Enquiry phase of the ETSI standards Two-step Approval Procedure.
信息：ICS：/ CCS：/ 发布：2000-09-01 实施：2014-04-18
BS EN 485-1-2016 铝和铝合金.薄板材、带材和厚板材.检验和交货技术条件
简介：
信息：ICS：77.150.10 CCS：H61 发布：2016-08-31 实施：2016-08-31
EN 485-1-2008 铝和铝合金.薄板材,带材和厚板材.第1部分:检验和交货技术条件.包含修改件A1-2009
简介：This document specifies the technical conditions for inspection and delivery of wrought aluminium and wrought aluminium alloy sheet, strip and plate for general applications. It also includes provisions for ordering and testing. It applies to products with a thickness over 0,20 mm up to and including 400 mm. For many special applications of aluminium strip, sheet and plate, specific European Standards exist, where different or additional requirements are formulated and the appropriate alloys and tempers are selected: see Annex A. Most of these special European Standards refer to provisions of this document. The selection of the relevant special European Standards is under the responsibility of the purchaser. Whenever the application involves special properties, such as corrosion resistance, toughness, fatigue strength, surface appearance and welding properties, the user should consult the supplier and consider the relevant special European Standard, as applicable.
信息：ICS：77.150.10 CCS： 发布：2008-03-01 实施：
ETSI EN 300 485-2000 综合业务数字网(ISDN).1号数字用户信令系统(DSS1)和7号信令系统ISDN用户部分(ISUP)中原因和位置的定义和用途(版本1.3.1)
简介：
信息：ICS： CCS：M12 发布：2000-09-01 实施：
EN 485-2-2016
简介：This European Standard specifies the mechanical properties of wrought aluminium and wrought aluminium alloy sheet, strip and plate for general engineering applications. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products such as corrugated, embossed, painted, sheets and strips or to special applications such as aerospace, can stock, finstock, for which mechanical properties are specified in separate European Standards. The chemical composition limits of the alloys are specified in EN 573-3. Temper designations are defined in EN 515.
信息：ICS：77.150.10 CCS： 发布：2016-07 实施：
EN 485-2-2008 铝和铝合金.薄板材,带材和厚板材.第2部分:机械性能
简介：This European Standard specifies the mechanical properties of wrought aluminium and wrought aluminium alloy sheet, strip and plate for general engineering applications. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products such as corrugated, embossed, painted, sheets and strips or to special applications such as aerospace, can stock, finstock, for which mechanical properties are specified in separate European Standards. The chemical composition limits of the alloys are specified in EN 573-3. Temper designations are defined in Annex B, in compliance with the provisions of EN 515.
信息：ICS：77.150.10 CCS： 发布：2008 实施：
EN 301 485-1-2000
简介：
信息：ICS：/ CCS：/ 发布：2000-09-01 实施：2000-10-13
EN 485-1-2016
简介：This document specifies the technical conditions for inspection and delivery of wrought aluminium and wrought aluminium alloy sheet, strip and plate for general applications. It also includes provisions for ordering and testing. It applies to products with a thickness over 0,20 mm up to and including 400 mm. For many special applications of aluminium strip, sheet and plate, specific European Standards exist, where different or additional requirements are formulated and the appropriate alloys and tempers are selected: see Annex A. Most of these special European Standards refer to provisions of this document. The selection of the relevant special European Standards is under the responsibility of the purchaser. Whenever the application involves special properties, such as corrosion resistance, toughness, fatigue strength, surface appearance and welding properties, the user should consult the supplier and consider the relevant special European Standard, as applicable.
信息：ICS：77.150.10 CCS： 发布：2016-07 实施：
DIN EN 485-2-2007 铝和铝合金.薄板材、带材和板材.第2部分:机械特性
简介：This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy sheet,strip and plate for general engineering applications.It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products such as corrugated, embossed, painted, sheets and strips or to special applications such as aerospace, can stock, finstock, for which mechanical properties are specified in separate European Standards.The chemical composition limits of the alloys are specified in EN 573-3.Temper designations are defined in Annex B, in compliance with the provisions of EN 515.
信息：ICS：77.150.10 CCS：H61 发布：2007-07 实施：2007-07-01
LST EN 485-4-2000
简介：
信息：ICS：77.150.10 CCS： 发布：2000-02-15 实施：2000-02-15
EN 485-2-2016 铝及铝合金板-带材和板材-第2部分:机械性能
简介：This European Standard specifies the mechanical properties of wrought aluminium and wrought aluminium alloy sheet, strip and plate for general engineering applications. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products such as corrugated, embossed, painted, sheets and strips or to special applications such as aerospace, can stock, finstock, for which mechanical properties are specified in separate European Standards. The chemical composition limits of the alloys are specified in EN 573-3. Temper designations are defined in EN 515.
信息：ICS：77.150.10 CCS：H61 发布：2016-07 实施：
BS EN 485-2-2007 铝和铝合金.薄板材、带材和板材.机械特性
简介：This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy sheet,strip and plate for general engineering applications.It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock)or to special products such as corrugated, embossed, painted, sheets and strips or to special applicationssuch as aerospace, can stock, finstock, for which mechanical properties are specified in separate EuropeanStandards.The chemical composition limits of the alloys are specified in EN 573-3.Temper designations are defined in Annex B, in compliance with the provisions of EN 515.
信息：ICS：77.150.10;77.120.10 CCS：H61 发布：2007-04-30 实施：2007-04-30
EN 301 485-1-1999
简介：
信息：ICS：/ CCS：/ 发布：1999-12-01 实施：2014-03-29
EN 485-1-2016 铝及铝合金板-带材和板材-第1部分:检验和交货技术条件
简介：This document specifies the technical conditions for inspection and delivery of wrought aluminium and wrought aluminium alloy sheet, strip and plate for general applications. It also includes provisions for ordering and testing. It applies to products with a thickness over 0,20 mm up to and including 400 mm. For many special applications of aluminium strip, sheet and plate, specific European Standards exist, where different or additional requirements are formulated and the appropriate alloys and tempers are selected: see Annex A. Most of these special European Standards refer to provisions of this document. The selection of the relevant special European Standards is under the responsibility of the purchaser. Whenever the application involves special properties, such as corrosion resistance, toughness, fatigue strength, surface appearance and welding properties, the user should consult the supplier and consider the relevant special European Standard, as applicable.
信息：ICS：77.150.10 CCS：H61 发布：2016-07 实施：
LST EN 301 485-1 V1.1.1-2007
简介：
信息：ICS：33.080 CCS： 发布：2007-04-25 实施：2007-04-25
EN 300 485-1999
简介：Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Signalling Protocols and Switching (SPS).
信息：ICS：/ CCS：/ 发布：1999-10-01 实施：2014-04-18
LST EN 485-2-2014 铝和铝合金. 薄板材, 带材和厚板材. 第2部分: 机械性能
简介：
信息：ICS：77.150.10 CCS： 发布：2014-02-17 实施：
EN 485-2-2007
简介：
信息：ICS：/ CCS：/ 发布：2007-04-01 实施：2008-11-26
ETSI EN 300 485-1999 综合业务数字网(ISDN).1号数字用户信令系统(DSS1)和7号信令系统ISDN用户部分(ISUP)中原因和位置的定义和用途.ITU-T建议Q.850(1998),修正本(版本1.2.3)
简介：
信息：ICS： CCS：M12 发布：1999 实施：
DIN EN 485-2-2013 铝和铝合金.片材、带材和板材.第2部分:机械特性.德文版本EN 485-2-2013
简介：
信息：ICS：77.150.10 CCS：H61 发布：2013-12 实施：
LST EN 300 485 V1.3.1-2006
简介：
信息：ICS：33.080 CCS： 发布：2006-12-29 实施：2006-12-29
EN 300 485-1998
简介：Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Signalling Protocols and Switching (SPS).
信息：ICS：/ CCS：/ 发布：1998-09-01 实施：2014-04-18
BS EN 485-2-2013 铝和铝合金.薄板材、带材和厚板材.机械性能
简介：
信息：ICS：77.150.10 CCS：H61 发布：2013-10-31 实施：2013-10-31
DS/EN 485-3-2005
简介：This part of EN 485 specifies the tolerances on form and dimensions for wrought aluminium and aluminium alloy sheet, strip and plate obtained by hot-rolling, for general engineering applications.
信息：ICS：77.150.10 CCS： 发布：2005-10-26 实施：2005-10-26
STAS SR EN 485-2-1995 铝和铝合金．片、条和板．第2部分：机械性能
简介：
信息：ICS：77.120.10 CCS： 发布：1995-8-1 实施：
DS/EN 485-2-2013
简介：This European Standard specifies the mechanical properties of wrought aluminium and wrought aluminium alloy sheet, strip and plate for general engineering applications. It does not apply to semi-finished rolled products in coiled form to be subjected to f
信息：ICS：77.150.10 CCS： 发布：2013-10-25 实施：2013-10-25
BS EN 485-2-2004 铝和铝合金.薄板、带材和板材.机械性能
简介：This part of EN 485 specifies the mechanical properties of wrought aluminium and aluminium alloy sheet, strip and plate for general engineering applications.It applies to flat rolled products.It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products such as corrugated, embossed, painted, etc. sheets and strips or to special applications such as aerospace, can stock, finstock, etc. which are dealt with in separate European Standards.The systems for designating these materials are described in EN 573-1 and EN 573-2. Their chemical composition limits are specified in EN 573-3.Mechanical property limits are specified for all Class A alloys, as defined in EN 573-4. Temper designations are defined in EN 515.NOTE Some of the products listed in the present standard can be subject to patent or patent applications, and their listing herein does not in any way imply the granting of a licence under such patent right.CEN/TC 132 affirms it is its policy that in the case when a patentee refuses to grant licences on standardised standard products under reasonable and not discriminatory conditions then this product shall be removed from the corresponding standard.
信息：ICS：77.150.10 CCS：H61 发布：2004-07-14 实施：2004-07-14
STAS SR EN 485-4-1995 铝和铝合金．片、条和板．第4部分：冷轧产品的形状和尺寸公差
简介：
信息：ICS：77.140.90 CCS： 发布：1995-4-1 实施：
EN 485-2-2013
简介：This European Standard specifies the mechanical properties of wrought aluminium and wrought aluminium alloy sheet, strip and plate for general engineering applications. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products such as corrugated, embossed, painted, sheets and strips or to special applications such as aerospace, can stock, finstock, for which mechanical properties are specified in separate European Standards. The chemical composition limits of the alloys are specified in EN 573-3. Temper designations are defined in Annex B, in compliance with the provisions of EN 515.
信息：ICS：77.150.10 CCS： 发布：2013 实施：
EN 485-2-2004
简介：
信息：ICS：/ CCS：/ 发布：2004-07-01 实施：2007-04-28
STAS SR EN 485-3-1995 铝和铝合金．片、条和板．第3部分：热卷产品形状和尺寸的公差
简介：
信息：ICS：77 140.90 CCS： 发布：1995-4-1 实施：
DS/EN 485-1+A1-2011
简介：This document specifies the technical conditions for inspection and delivery of wrought aluminium and wrought aluminium alloy sheet, strip and plate for general applications. It also includes provisions for ordering and testing.It applies to products with a thickness over 0,20 mm up to and including 400 mm.For many special applications of aluminium strip, sheet and plate, specific European Standards exist, where different or additional requirements are formulated and the appropriate alloys and tempers are selected: see Annex A. Most of these special European Standards refer to provisions of this document.The selection of the relevant special European Standa
信息：ICS：77.150.10 CCS： 发布：2011-04-01 实施：2011-04-01
LST EN 485-3-2003
简介：
信息：ICS：77.150.10 CCS： 发布：2003-07-02 实施：2003-07-02
STAS SR EN 485-1-1995 铝及铝合金．板材，带材和板．第1部分：检查和交付的技术条件
简介：
信息：ICS：77.140.90 CCS： 发布：1995-10-1 实施：
LST EN 485-1-2008+A1-2010
简介：
信息：ICS：77.150.10 CCS： 发布：2010-02-26 实施：2010-02-26
DIN EN 485-3-2003 铝和铝合金.带材、薄板和板材.第3部分:热轧制品的尺寸和外形公差
简介：This part of this European Standard specifies the tolerances on form and dimensions for wrought aluminium and aluminium alloy sheet, strip and plate obtained by hot-rolling, for general engineering applications. It applies to products with a thickness from 2,5 mm up to and including 400 mm. It does not apply to semi-finished rolled produits in coiled form to be subjected to further rolling (reroll stock) or to special products such as corrugated, embossed, etc. sheet and strip or to special applications such as aerospace which are dealt with in separate European Standards.,,
信息：ICS：77.150.10 CCS：H61 发布：2003-06 实施：
BS EN 485-2-1995 锻铝和铝合金.薄板材、带材和中厚板材.第2部分:机械性能
简介：
信息：ICS：77.150.10 CCS：H61 发布：1995-04-15 实施：1995-04-15
DIN EN 485-1-2010 铝和铝合金.薄板材、带材和厚板材.第1部分:检验和交货技术条件.德文版本EN 485-1-2008+A1-2009
简介：This document specifies the technical conditions for inspection and delivery of wrought aluminium and wrought aluminium alloy sheet, strip and plate for general applications. It also includes provisions for ordering and testing. It applies to products with a thickness over 0, 20 mm up to and including 400 mm. For many special applications of aluminium strip, sheet and plate, specific European Standards exist, where different or additional requirements are formulated and the appropriate alloys and tempers are selected: see Annex A. Most of these special European Standards refer to provisions of this document. The selection of the relevant special European Standards is under the responsibility of the purchaser. Whenever the application involves special properties, such as corrosion resistance, toughness, fatigue strength, surface appearance and welding properties, the user should consult the supplier and consider the relevant special European Standard, as applicable.
信息：ICS：77.150.10 CCS：H61;H04 发布：2010-02 实施：
BS EN 485-3-2003 铝和铝合金.片材、带材和板材.热轧制品的形状和尺寸公差
简介：This part of this European Standard specifies the tolerances on form and dimensions for wrought aluminium and aluminium alloy sheet, strip and plate obtained by hot-rolling, for general engineering applications.It applies to products with a thickness from 2,5 mm up to and including 400 mm.It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products such as corrugated, embossed, etc. sheet and strip or to special applications such as aerospace which are dealt with in separate European Standards.Technical conditions for inspection and delivery of products covered by this standard are specified in EN 485-1.NOTE Some of the products listed in the present standard can be subject to patent or patent applications, and their listing herein does not in any way imply the granting of a licence under such patent right.CEN/TC 132 affirms it is its policy that in the case when a patentee refuses to grant licences on standardised standard products under reasonable and not discriminatory conditions, then this product shall be removed from the corresponding standard.
信息：ICS：77.150.10 CCS：H61 发布：2003-03-26 实施：2003-03-26
ONORM EN 485-1-1994 铝及铝合金．薄板，条和板．第1部分：检验和交货技术条件
简介：Diese Norm legt die Technischen Lieferbedingungen für B?nder, Bleche und Platten aus Aluminium und Aluminium-Knetlegierungen für allgemeine Verwendungen fest. Sie gilt für Erzeugnisse mit einer Dicke über 0,20 mm bis 200 mm.Sie gilt nicht für Vorwalzb?nder und nicht für Sonderanwendungen wie beispielsweise Luft- und Raumfahrt, Herstellung von Dosen und Verschlüssen, W?rmeaustauscher usw., welche Gegenstand besonderer Europ?ischer Normen sind.
信息：ICS： CCS： 发布：1994-03-01 实施：1994-03-01
LST EN 485-2-2009
简介：
信息：ICS：77.150.10 CCS： 发布：2009-02-13 实施：2009-02-13
EN 485-3-2003 铝和铝合金.带材,薄板和板材.第3部分:热轧制品的尺寸和外形公差
简介：This part of this European Standard specifies the tolerances on form and dimensions for wrought aluminium andaluminium alloy sheet, strip and plate obtained by hot-rolling, for general engineering applications.It applies to products with a thickness from 2,5 mm up to and including 400 mm.It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (rerollspecial products such as corrugated, embossed, etc. sheet and strip or to special applications such aswhich are dealt with in separate European Standards.stock) or toaerospaceTechnical conditions for inspection and delivery of products covered byThis standard are specified in EN 485-1.NOTE Some of the products listed inThe present standard can be subject to patent or patent applications, andTheir listingherein does not in any way implyThe granting of a licence under such patent right.CEN/TC 132 affirms it is its policy that inThe case when a patentee refuses to grant licences on standardisedstandard products under reasonable and not discriminatory conditions,ThenThis product shall be removed fromThecorresponding standard.
信息：ICS：77.150.10 CCS： 发布：2003-03-01 实施：
ONORM EN 485-4-1994 铝及铝合金．薄板，条和板．第4部分：冷轧制品形状和尺寸公差
简介：Dieser Teil der Norm EN 485 legt die Grenzabma?e und Formtoleranzen für kaltgewalzte B?nder, Bleche und Platten aus Aluminium und Aluminium-Knetlegierungen fest, die für allgemeine Verwendungen bestimmmt sind. Er gilt für Erzeugnisse mit einer Dicke über 0,20 mm bis 50 mm.Er gilt nicht für Vorwalzb?nder, nicht für Spezialerzeug-nisse wie z.B. gepr?gte oder rollgeformte B?nder und Bleche und nicht für Erzeugnisse, die für Spezialanwen-dungen, wie beispielsweise Luft- und Raumfahrt, Getr?nkedosen usw. eingesetzt werden. Diese werden in gesonderten Europ?ischen Normen abgehandelt. Die zugeh?rigen Technischen Lieferbedingungen sind in der EN 485-1 festgelegt.
信息：ICS： CCS： 发布：1994-03-01 实施：1994-03-01
DIN EN 485-2-2009 铝和铝合金.薄板材、带材和厚板材.第2部分:机械特性
简介：This European Standard specifies the mechanical properties Of wrought aluminium and wrought aluminiumalloy sheet, strip and plate for general engineering applications.It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock)or to special products such as corrugated, embossed, painted, sheets and strips or to special applicationssuch as aerospace, can stock, finstock, for which mechanical properties are specified in separate EuropeanStandards.The chemical composition limits of the alloys are specified in EN 573-3.Temper designations are defined in Annex B, in compliance with the provisions of EN 515.
信息：ICS：77.150.10 CCS：H61 发布：2009-01 实施：
LST EN 300 485 V1.2.3-2002
简介：
信息：ICS：33.080 CCS： 发布：2002-11-26 实施：2002-11-26
ONORM EN 485-3-1994 铝及铝合金．薄板，条和板．第3部分：热轧制品形状和尺寸公差
简介：Dieser Teil der EN 485 legt die Grenzabma?e und Formtoleranzen für warmgewalzte B?nder, Bleche und Platten aus Aluminium und Aluminium-Knetlegierungen fest, die für allgemeine Verwendungen bestimmt sind. Er gilt für Erzeugnisse mit einer Dicke von 2,5 mm bis einschlie?lich 200 mm.Er gilt nicht für Vorwalzb?nder, nicht für Spezialerzeugnisse wie z. B. gepr?gte oder rollgeformte B?nder und Bleche, und nicht für Erzeugnisse, die für Spezialanwendungen, wie beispielsweise Luft- und Raumfahrt eingesetzt werden. Diese werden in gesonderten Europ?ischen Normen abgehandelt. Die zugeh?rigen Technischen Lieferbedingungen sind in der EN 485-1 festgelegt.
信息：ICS： CCS： 发布：1994-03-01 实施：1994-03-01
BS EN 485-2-2008 铝和铝合金.薄板材、带材和厚板材.机械性能
简介：This European Standard specifies the mechanical properties of wrought aluminium and wrought aluminiumalloy sheet, strip and plate for general engineering applications.It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock)or to special products such as corrugated, embossed, painted, sheets and strips or to special applicationssuch as aerospace, can stock, finstock, for which mechanical properties are specified in separate EuropeanStandards.The chemical composition limits of the alloys are specified in EN 573-3.Temper designations are defined in Annex B, in compliance with the provisions of EN 515.
信息：ICS：77.150.10 CCS：H61 发布：2008-11-30 实施：2008-11-30
ETSI EN 300 485-2001 综合业务数字网(ISDN).1号数字用户信令系统(DSS1)和7号信令系统ISDN用户部分(ISUP)中原因和位置的定义和用途.带修正补遗的ITU-T建议Q.850(1998)(版本1.3.)
简介：
信息：ICS： CCS：M12 发布：2001-04-01 实施：
BS EN 485-4-1994 铝和铝合金.薄板材、带材和板材.冷轧制品的形状和尺寸公差
简介：This Part of EN 485 specifies the tolerances on shape and dimensions for wrought aluminium and aluminium alloy sheet, strip and plate obtained by cold-rolling, for general engineering applications.It applies to products with a thickness over 0,20 mm up to and including 50 mm.It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products such as corrugated, embossed, etc. sheet and strip or to special applications such as aerospace, can stock, etc. which are dealt with in separate European Standards.Technical conditions for inspection and delivery of products covered by this standard are specified in EN 485-1.
信息：ICS：77.150.10 CCS：H61 发布：1994-01-15 实施：1994-01-15
