ISO1872-2检测标准

发布时间：2023-02-06 18:33:06 • 阅读量： • 来源：中析研究所

ISO1872-2相关标准参考信息

KS M ISO 1872-2-2016
简介：
信息：ICS：83.080.20 CCS：发布：2016-12-26 实施：

简介： 信息：

KS M ISO 1872-2-2016
简介：
信息：ICS：83.080.20 CCS：发布：2016-12-26 实施：

简介： 信息：

KS M ISO 1872-2-2011 塑料.聚乙烯(PE)模塑和挤制材料.第2部分:试样制备和性能测定
简介：이 표준은 성형 및 압출용 폴리에틸렌 재료의 물성을 측정하기 위한 시험편 제작 및 시험방법
信息：ICS：83.080.20 CCS：G32 发布：2011-12-23 实施：2011-12-23

简介： 信息：

ISO 1872-2:2007
简介：
信息：ICS：83.080.20 CCS：发布：2009-10-09 实施：

简介： 信息：

LST EN ISO 1872-2-2007
简介：
信息：ICS：83.080.20 CCS：发布：2007-07-31 实施：2007-07-31

简介： 信息：

DS/EN ISO 1872-2-2007
简介：This part of 1872 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyethylene (PE) moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given.Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are also given. Properties and test methods that are suitable and necessary to characterize PE moulding and extrusion materials are listed.The properties have been selected fr
信息：ICS：83.080.20 CCS：发布：2007-05-31 实施：2007-05-31

简介： 信息：

DIN EN ISO 1872-2-2007 塑料.聚乙烯(PE)模塑和挤塑材料.第2部分:试样的制备和特性的测定
简介：This part of ISO 1872 specifies the methods of preparation of test specimens and the test methods to be usedin determining the properties of polyethylene (PE) moulding and extrusion materials.Requirements ofrhandling test material and for conditioning both the test material before moulding and the specimens before testing are given.procedures and condetions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are also given.Properties and test methods that are suitable and necessary to characterize PE moulding and extrusion materials are listed.The properties have been selected from the general test methods in ISO 10350-1．Other test methods in wideuse for or of particular significance to these moulding and extrusion materials are also included in this part ofISO 1872，as are the designatory properties specified in ISO 1872-1．In order to obtain reproducible and comparable test results,it is necessary to use the mehtods of preparation and conditioning,the specimen dimensions and the test procedures specified herein.Values determined will not necessarily be identical to those obtained using specimens of different dimensions or prepared using different procedures.
信息：ICS：83.080.20 CCS：G32 发布：2007-05 实施：

简介： 信息：

BS EN ISO 1872-2-2007 塑料.聚乙烯(PE)模塑和挤塑材料.试样制备和性能测定
简介：This part of ISO 1872 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyethylene (PE) moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given. Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are also given. Properties and test methods that are suitable and necessary to characterize PE moulding and extrusion materials are listed. The properties have been selected from the general test methods in ISO 10350-1. Other test methods in wide use for or of particular significance to these moulding and extrusion materials are also included in this part of ISO 1872, as are the designatory properties specified in ISO 1872-1. In order to obtain reproducible and comparable test results, it is necessary to use the methods of preparation and conditioning, the specimen dimensions and the test procedures specified herein. Values determined will not necessarily be identical to those obtained using specimens of different dimensions or prepared using different procedures.
信息：ICS：83.080.20 CCS：G33 发布：2007-03-30 实施：2007-03-30

简介： 信息：

EN ISO 1872-2-2007 塑料.聚乙烯(PE)模塑和挤塑材料.第2部分:试样制备和性能测定
简介：This part of ISO 1872 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyethylene(PE) moulding and extrusion materials.Requirements for handing test material and for conditioning both the test material before moulding and the specimens before testing are given.Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are also given.Properties and test methods that are suitable and necessary to characterize PE moulding and extrusion materials are listed.The properties have been selected fr
信息：ICS： CCS：发布：2007-02-01 实施：

简介： 信息：

ISO 1872-2-2007 塑料.聚乙烯(PE)模塑和挤塑材料.第2部分:试样制备和性能测定
简介：This part of ISO 1872 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyethylene (PE) moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given.Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are also given. Properties and test methods that are suitable and necessary to characterize PE moulding and extrusion materials are listed.The properties have been selected from the general test methods in ISO 10350-1. Other test methods in wide use for or of particular significance to these moulding and extrusion materials are also included in this part of ISO 1872, as are the designatory properties specified in ISO 1872-1.In order to obtain reproducible and comparable test results, it is necessary to use the methods of preparation and conditioning, the specimen dimensions and the test procedures specified herein. Values determined will not necessarily be identical to those obtained using specimens of different dimensions or prepared using different procedures.
信息：ICS：83.080.20 CCS：G32 发布：2007-02 实施：

简介： 信息：

ISO 1872-2-1997/Amd 1-2000 塑料.聚乙烯（PE）模塑和挤压材料.第2部分:试样制备和性能测定.修改件1
简介：
信息：ICS：83.080.20 CCS：发布：2000-06-08 实施：

简介： 信息：

ISO 1872-2 AMD 1-2000 塑料聚乙烯(PE)模塑和挤塑材料第2部分:试样制备和性能测定修改1
简介：
信息：ICS：83.080.20 CCS：G31 发布：2000-06 实施：

简介： 信息：

EN ISO 1872-2-1997
简介：
信息：ICS：/ CCS：/ 发布：1997-04-01 实施：2007-03-13

简介： 信息：

ISO 1872-2-1997 塑料.聚乙烯(PE)模塑和挤制材料.第2部分:试样制备和性能测定
简介：This part of ISO 1872 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of PE moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given here.Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are given. Properties and test methods which are suitable and necessary to characterize PE moulding and extrusion materials are listed.The properties have been selected from the general test methods in ISO 10350. Other test methods in wide use for or of particular significance to these moulding and extrusion materials are also included in this part of ISO 1872, as are the designator/ properties specified in part 1.In order to obtain reproducible and comparable test results, it is necessary to use the methods of preparation and conditioning, the specimen dimensions and the test procedures specified herein. Values determined will not necessarily be identical to those obtained using specimens of different dimensions or prepared using different procedures.
信息：ICS：83.080.20 CCS：G31 发布：1997-04 实施：

简介： 信息：

ISO 1872-2:1997 塑料.聚乙烯（PE）模塑和挤压材料.第2部分:试样制备和性能测定
简介：
信息：ICS：83.080.20 CCS：发布：1997-03-27 实施：

简介： 信息：

ISO 1872-2-1989 塑料.聚乙烯和乙烯共聚物热塑性塑料.第2部分:试验样品的制备和性能的测定
简介：
信息：ICS：6770 CCS：G31 发布：1989-11 实施：1989-11-01

简介： 信息：

ISO 1872-2:1989 塑料.聚乙烯（PE）和乙烯共聚物热塑性塑料.第2部分:试样制备和性能测定
简介：
信息：ICS：83.080.20 CCS：发布：1989-10-12 实施：

简介： 信息：