IEC60439-1检测标准

发布时间:2023-02-04 01:12:02 阅读量: 来源:中析研究所

IEC60439-1相关标准参考信息

SNI IEC 60439-1-2009 低压开关设备和控制设备组件. 第1部分:型式试验和部分型式试验的组件
简介:
信息:ICS:29.130.20 CCS发布:2009 实施

SNI IEC 60439-1-2009 低压开关设备和控制设备组件. 第1部分:型式试验和部分型式试验的组件
简介:
信息:ICS:29.130.20 CCS发布:2009 实施

SNI IEC 60439-1-2009 低压开关设备和控制设备组件. 第1部分:型式试验和部分型式试验的组件
简介:
信息:ICS:29.130.20 CCS发布:2009 实施

IEC 60439-2 AMD 1-2005 低压开关设备和控制设备组合装置.第2部分:母线干线系统总线的特殊要求.修改件1
简介:This is Amendment 1 to IEC 60439-2-2000 (Low-voltage switchgear and controlgear assemblies Part 2: Particular requirements for busbar trunking systems (busways))
信息:ICS:29.130.20 CCS:K31 发布:2005-08 实施

IEC 60439-2 AMD 1-2005 低压开关设备和控制设备组合装置.第2部分:母线干线系统总线的特殊要求.修改件1
简介:This is Amendment 1 to IEC 60439-2-2000 (Low-voltage switchgear and controlgear assemblies Part 2: Particular requirements for busbar trunking systems (busways))
信息:ICS:29.130.20 CCS:K31 发布:2005-08 实施

IEC 60439-2 AMD 1-2005 低压开关设备和控制设备组合装置.第2部分:母线干线系统总线的特殊要求.修改件1
简介:This is Amendment 1 to IEC 60439-2-2000 (Low-voltage switchgear and controlgear assemblies Part 2: Particular requirements for busbar trunking systems (busways))
信息:ICS:29.130.20 CCS:K31 发布:2005-08 实施

IEC 60439-1 CORR 1-2004 Ensembles d'appareillage à basse tension – Partie 1: Ensembles de série et ensembles dérivés de série CORRIGENDUM 1 (Edition 4.0)
简介:Scope and objectThis International Standard applies to low-voltage switchgear and controlgear ASSEMBLIES (type-tested ASSEMBLIES (TTA) and partially type-tested ASSEMBLIES (PTTA))@ the rated voltage?of which does not exceed 1 000 V a.c. at frequencies not exceeding 1 000 Hz@ or 1 500 V d.c.This standard also applies to ASSEMBLIES incorporating control and/or power equipment@ the frequencies of which are higher. In this case@ appropriate additional requirements will apply.This standard applies to stationary or movable ASSEMBLIES with or without enclosure.NOTE Additional requirements for certain specific types of assemblies are given in supplementary IEC standards.This standard applies to ASSEMBLIES intended for use in connection with the generation@ transmission@ distribution and conversion of electric energy@ and for the control of electric energy consuming equipment.It also applies to ASSEMBLIES designed for use under special service conditions@ for example in ships@ in rail vehicles@ for hoisting equipment or in explosive atmospheres@ and for domestic?(operated by unskilled persons) applications@ provided that the relevant specific requirements are complied with. This standard applies also to ASSEMBLIES designed for electrical equipment of machines. However@ where applicable the additional requirements of IEC 60204-1 have to be fulfilled.This standard does not apply to individual devices and self-contained components@ such as motor starters@ fuse switches@ electronic equipment@ etc. complying with their relevant standards.The object of this standard is to lay down the definitions and to state the service conditions@ construction requirements@ technical characteristics and tests for low-voltage switchgear and controlgear ASSEMBLIES.?
信息:ICS:/ CCS:/ 发布:2004-11-01 实施:2009-01-30

IEC 60439-1 CORR 1-2004 Ensembles d'appareillage à basse tension – Partie 1: Ensembles de série et ensembles dérivés de série CORRIGENDUM 1 (Edition 4.0)
简介:Scope and objectThis International Standard applies to low-voltage switchgear and controlgear ASSEMBLIES (type-tested ASSEMBLIES (TTA) and partially type-tested ASSEMBLIES (PTTA))@ the rated voltage?of which does not exceed 1 000 V a.c. at frequencies not exceeding 1 000 Hz@ or 1 500 V d.c.This standard also applies to ASSEMBLIES incorporating control and/or power equipment@ the frequencies of which are higher. In this case@ appropriate additional requirements will apply.This standard applies to stationary or movable ASSEMBLIES with or without enclosure.NOTE Additional requirements for certain specific types of assemblies are given in supplementary IEC standards.This standard applies to ASSEMBLIES intended for use in connection with the generation@ transmission@ distribution and conversion of electric energy@ and for the control of electric energy consuming equipment.It also applies to ASSEMBLIES designed for use under special service conditions@ for example in ships@ in rail vehicles@ for hoisting equipment or in explosive atmospheres@ and for domestic?(operated by unskilled persons) applications@ provided that the relevant specific requirements are complied with. This standard applies also to ASSEMBLIES designed for electrical equipment of machines. However@ where applicable the additional requirements of IEC 60204-1 have to be fulfilled.This standard does not apply to individual devices and self-contained components@ such as motor starters@ fuse switches@ electronic equipment@ etc. complying with their relevant standards.The object of this standard is to lay down the definitions and to state the service conditions@ construction requirements@ technical characteristics and tests for low-voltage switchgear and controlgear ASSEMBLIES.?
信息:ICS:/ CCS:/ 发布:2004-11-01 实施:2009-01-30

IEC 60439-1 CORR 1-2004 Ensembles d'appareillage à basse tension – Partie 1: Ensembles de série et ensembles dérivés de série CORRIGENDUM 1 (Edition 4.0)
简介:Scope and objectThis International Standard applies to low-voltage switchgear and controlgear ASSEMBLIES (type-tested ASSEMBLIES (TTA) and partially type-tested ASSEMBLIES (PTTA))@ the rated voltage?of which does not exceed 1 000 V a.c. at frequencies not exceeding 1 000 Hz@ or 1 500 V d.c.This standard also applies to ASSEMBLIES incorporating control and/or power equipment@ the frequencies of which are higher. In this case@ appropriate additional requirements will apply.This standard applies to stationary or movable ASSEMBLIES with or without enclosure.NOTE Additional requirements for certain specific types of assemblies are given in supplementary IEC standards.This standard applies to ASSEMBLIES intended for use in connection with the generation@ transmission@ distribution and conversion of electric energy@ and for the control of electric energy consuming equipment.It also applies to ASSEMBLIES designed for use under special service conditions@ for example in ships@ in rail vehicles@ for hoisting equipment or in explosive atmospheres@ and for domestic?(operated by unskilled persons) applications@ provided that the relevant specific requirements are complied with. This standard applies also to ASSEMBLIES designed for electrical equipment of machines. However@ where applicable the additional requirements of IEC 60204-1 have to be fulfilled.This standard does not apply to individual devices and self-contained components@ such as motor starters@ fuse switches@ electronic equipment@ etc. complying with their relevant standards.The object of this standard is to lay down the definitions and to state the service conditions@ construction requirements@ technical characteristics and tests for low-voltage switchgear and controlgear ASSEMBLIES.?
信息:ICS:/ CCS:/ 发布:2004-11-01 实施:2009-01-30

IEC 60439-1 AMD 1 CORR 1-2004 低压开关设备和控制设备组件.第1部分:已通过型式试验和部分型式试验的组件.勘误1
简介:This standard is Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies; Amendment 1; Corrigendum 1.
信息:ICS:29.130.20 CCS:K31 发布:2004-11 实施

IEC 60439-1 AMD 1 CORR 1-2004 低压开关设备和控制设备组件.第1部分:已通过型式试验和部分型式试验的组件.勘误1
简介:This standard is Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies; Amendment 1; Corrigendum 1.
信息:ICS:29.130.20 CCS:K31 发布:2004-11 实施

IEC 60439-1 AMD 1 CORR 1-2004 低压开关设备和控制设备组件.第1部分:已通过型式试验和部分型式试验的组件.勘误1
简介:This standard is Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies; Amendment 1; Corrigendum 1.
信息:ICS:29.130.20 CCS:K31 发布:2004-11 实施

IEC 60439-1-2004 Ensembles d'appareillage à basse tension – Partie 1: Ensembles de série et ensembles dérivés de série (Edition 4.1; Edition 4:1999 Consolidated with Amendment 1:2004)
简介:Scope and object This International Standard applies to low-voltage switchgear and controlgear ASSEMBLIES (type-tested ASSEMBLIES (TTA) and partially type-tested ASSEMBLIES (PTTA))@ the rated voltage of which does not exceed 1 000 V a.c. at frequencies not exceeding 1 000 Hz@ or 1 500 V d.c. This standard also applies to ASSEMBLIES incorporating control and/or power equipment@ the frequencies of which are higher. In this case@ appropriate additional requirements will apply. This standard applies to stationary or movable ASSEMBLIES with or without enclosure. NOTE Additional requirements for certain specific types of assemblies are given in supplementary IEC standards. This standard applies to ASSEMBLIES intended for use in connection with the generation@ transmission@ distribution and conversion of electric energy@ and for the control of electric energy consuming equipment. It also applies to ASSEMBLIES designed for use under special service conditions@ for example in ships@ in rail vehicles@ for hoisting equipment or in explosive atmospheres@ and for domestic (operated by unskilled persons) applications@ provided that the relevant specific requirements are complied with. This standard applies also to ASSEMBLIES designed for electrical equipment of machines. However@ where applicable the additional requirements of IEC 60204-1 have to be fulfilled. This standard does not apply to individual devices and self-contained components@ such as motor starters@ fuse switches@ electronic equipment@ etc. complying with their relevant standards. The object of this standard is to lay down the definitions and to state the service conditions@ construction requirements@ technical characteristics and tests for low-voltage switchgear and controlgear ASSEMBLIES.
信息:ICS:/ CCS:/ 发布:2004-04-01 实施:2009-01-30

IEC 60439-1-2004 Ensembles d'appareillage à basse tension – Partie 1: Ensembles de série et ensembles dérivés de série (Edition 4.1; Edition 4:1999 Consolidated with Amendment 1:2004)
简介:Scope and object This International Standard applies to low-voltage switchgear and controlgear ASSEMBLIES (type-tested ASSEMBLIES (TTA) and partially type-tested ASSEMBLIES (PTTA))@ the rated voltage of which does not exceed 1 000 V a.c. at frequencies not exceeding 1 000 Hz@ or 1 500 V d.c. This standard also applies to ASSEMBLIES incorporating control and/or power equipment@ the frequencies of which are higher. In this case@ appropriate additional requirements will apply. This standard applies to stationary or movable ASSEMBLIES with or without enclosure. NOTE Additional requirements for certain specific types of assemblies are given in supplementary IEC standards. This standard applies to ASSEMBLIES intended for use in connection with the generation@ transmission@ distribution and conversion of electric energy@ and for the control of electric energy consuming equipment. It also applies to ASSEMBLIES designed for use under special service conditions@ for example in ships@ in rail vehicles@ for hoisting equipment or in explosive atmospheres@ and for domestic (operated by unskilled persons) applications@ provided that the relevant specific requirements are complied with. This standard applies also to ASSEMBLIES designed for electrical equipment of machines. However@ where applicable the additional requirements of IEC 60204-1 have to be fulfilled. This standard does not apply to individual devices and self-contained components@ such as motor starters@ fuse switches@ electronic equipment@ etc. complying with their relevant standards. The object of this standard is to lay down the definitions and to state the service conditions@ construction requirements@ technical characteristics and tests for low-voltage switchgear and controlgear ASSEMBLIES.
信息:ICS:/ CCS:/ 发布:2004-04-01 实施:2009-01-30

IEC 60439-1-2004 Ensembles d'appareillage à basse tension – Partie 1: Ensembles de série et ensembles dérivés de série (Edition 4.1; Edition 4:1999 Consolidated with Amendment 1:2004)
简介:Scope and object This International Standard applies to low-voltage switchgear and controlgear ASSEMBLIES (type-tested ASSEMBLIES (TTA) and partially type-tested ASSEMBLIES (PTTA))@ the rated voltage of which does not exceed 1 000 V a.c. at frequencies not exceeding 1 000 Hz@ or 1 500 V d.c. This standard also applies to ASSEMBLIES incorporating control and/or power equipment@ the frequencies of which are higher. In this case@ appropriate additional requirements will apply. This standard applies to stationary or movable ASSEMBLIES with or without enclosure. NOTE Additional requirements for certain specific types of assemblies are given in supplementary IEC standards. This standard applies to ASSEMBLIES intended for use in connection with the generation@ transmission@ distribution and conversion of electric energy@ and for the control of electric energy consuming equipment. It also applies to ASSEMBLIES designed for use under special service conditions@ for example in ships@ in rail vehicles@ for hoisting equipment or in explosive atmospheres@ and for domestic (operated by unskilled persons) applications@ provided that the relevant specific requirements are complied with. This standard applies also to ASSEMBLIES designed for electrical equipment of machines. However@ where applicable the additional requirements of IEC 60204-1 have to be fulfilled. This standard does not apply to individual devices and self-contained components@ such as motor starters@ fuse switches@ electronic equipment@ etc. complying with their relevant standards. The object of this standard is to lay down the definitions and to state the service conditions@ construction requirements@ technical characteristics and tests for low-voltage switchgear and controlgear ASSEMBLIES.
信息:ICS:/ CCS:/ 发布:2004-04-01 实施:2009-01-30

IEC 60439-1 Edition 4.1-2004 低压开关设备和控制设备组件.第1部分:已通过型式试验和部分型式试验的组件
简介:Applies to low-voltage switchgear and controlgear assemblies (type-tested assemblies (TTA) and partially type-tested assemblies (PTTA)), the rated voltage of which does not exceed 1000 V a.c. at frequencies not exceeding 1000 Hz, or 1500 V d.c.
信息:ICS:29.130.20 CCS:K31 发布:2004-04 实施

IEC 60439-1 Edition 4.1-2004 低压开关设备和控制设备组件.第1部分:已通过型式试验和部分型式试验的组件
简介:Applies to low-voltage switchgear and controlgear assemblies (type-tested assemblies (TTA) and partially type-tested assemblies (PTTA)), the rated voltage of which does not exceed 1000 V a.c. at frequencies not exceeding 1000 Hz, or 1500 V d.c.
信息:ICS:29.130.20 CCS:K31 发布:2004-04 实施

IEC 60439-1 Edition 4.1-2004 低压开关设备和控制设备组件.第1部分:已通过型式试验和部分型式试验的组件
简介:Applies to low-voltage switchgear and controlgear assemblies (type-tested assemblies (TTA) and partially type-tested assemblies (PTTA)), the rated voltage of which does not exceed 1000 V a.c. at frequencies not exceeding 1000 Hz, or 1500 V d.c.
信息:ICS:29.130.20 CCS:K31 发布:2004-04 实施

IEC 60439-1 AMD 1-2004 修改件1.低压开关设备和控制设备组合装置.第1部分:已通过型式试验和部分型式试验的组合装置
简介:This is Amendment 1 to IEC 60439-1-1999 (Low-voltage switchgear and controlgear assemblies Part1: Type-tested and partially type-tested assemblies)
信息:ICS:29.130.20 CCS:K31 发布:2004-01 实施

IEC 60439-1 AMD 1-2004 修改件1.低压开关设备和控制设备组合装置.第1部分:已通过型式试验和部分型式试验的组合装置
简介:This is Amendment 1 to IEC 60439-1-1999 (Low-voltage switchgear and controlgear assemblies Part1: Type-tested and partially type-tested assemblies)
信息:ICS:29.130.20 CCS:K31 发布:2004-01 实施

IEC 60439-1 AMD 1-2004 修改件1.低压开关设备和控制设备组合装置.第1部分:已通过型式试验和部分型式试验的组合装置
简介:This is Amendment 1 to IEC 60439-1-1999 (Low-voltage switchgear and controlgear assemblies Part1: Type-tested and partially type-tested assemblies)
信息:ICS:29.130.20 CCS:K31 发布:2004-01 实施

KS C IEC 60439-1-2003(2018) 低电压开关装置及控制装置元件-第1部分:形式测试及部分元件形式测试
简介:
信息:ICSCCS发布:2003-11-03 实施

KS C IEC 60439-1-2003(2018) 低电压开关装置及控制装置元件-第1部分:形式测试及部分元件形式测试
简介:
信息:ICSCCS发布:2003-11-03 实施

KS C IEC 60439-1-2003(2018) 低电压开关装置及控制装置元件-第1部分:形式测试及部分元件形式测试
简介:
信息:ICSCCS发布:2003-11-03 实施

KS C IEC 60439-1-2003 低压开关设备和控制设备组件.第1部分:经过型式试验和部分型式试验的组件
简介:이 규격은 1 000 Hz, 또는 1 500 V 직류를 넘지 않는 주파수에서, 1 00
信息:ICS:29.120.60 CCS:K30 发布:2003-11-03 实施:2003-11-03

KS C IEC 60439-1-2003 低压开关设备和控制设备组件.第1部分:经过型式试验和部分型式试验的组件
简介:이 규격은 1 000 Hz, 또는 1 500 V 직류를 넘지 않는 주파수에서, 1 00
信息:ICS:29.120.60 CCS:K30 发布:2003-11-03 实施:2003-11-03

KS C IEC 60439-1-2003 低压开关设备和控制设备组件.第1部分:经过型式试验和部分型式试验的组件
简介:이 규격은 1 000 Hz, 또는 1 500 V 직류를 넘지 않는 주파수에서, 1 00
信息:ICS:29.120.60 CCS:K30 发布:2003-11-03 实施:2003-11-03

KS C IEC 60439-1-2003 低压开关设备和控制设备组件.第1部分:经过型式试验和部分型式试验的组件
简介:이 규격은 1 000 Hz, 또는 1 500 V 직류를 넘지 않는 주파수에서, 1 00
信息:ICS:29.120.60 CCS:K30 发布:2003-11-03 实施:2003-11-03

KS C IEC 60439-1-2003 低压开关设备和控制设备组件.第1部分:经过型式试验和部分型式试验的组件
简介:이 규격은 1 000 Hz, 또는 1 500 V 직류를 넘지 않는 주파수에서, 1 00
信息:ICS:29.120.60 CCS:K30 发布:2003-11-03 实施:2003-11-03

KS C IEC 60439-1-2003 低压开关设备和控制设备组件.第1部分:经过型式试验和部分型式试验的组件
简介:이 규격은 1 000 Hz, 또는 1 500 V 직류를 넘지 않는 주파수에서, 1 00
信息:ICS:29.120.60 CCS:K30 发布:2003-11-03 实施:2003-11-03

IEC 60439-1-1999 Ensembles D'Appareillage A Basse Tension - Partie 1: Ensembles De Serie Et Ensembles Derives De Serie (Edition 4.0)
简介:
信息:ICS:/ CCS:/ 发布:1999-09-01 实施:2004-02-10

IEC 60439-1-1999 Ensembles D'Appareillage A Basse Tension - Partie 1: Ensembles De Serie Et Ensembles Derives De Serie (Edition 4.0)
简介:
信息:ICS:/ CCS:/ 发布:1999-09-01 实施:2004-02-10

IEC 60439-1-1999 Ensembles D'Appareillage A Basse Tension - Partie 1: Ensembles De Serie Et Ensembles Derives De Serie (Edition 4.0)
简介:
信息:ICS:/ CCS:/ 发布:1999-09-01 实施:2004-02-10

IEC 60439-1-1999 低压开关设备和控制设备组合装置 第1部分:已通过型式试验和部分型式试验的组合装置
简介:This International Standard applies to low-voltage switchgear and controlgear ASSEMBLIES (type-tested ASSEMBLIES (TTA) and partially type-tested ASSEMBLIES (PTTA)), the rated voltage of which does not exceed 1000 V a.c. at frequencies not exceeding 1000 Hz, or 1500 V d.c.This standard also applies to ASSEMBLIES incorporating control and/or power equipment, the frequencies of which are higher. In this case, appropriate additional requirements will apply.This standard applies to stationary or movable ASSEMBLIES with or without enclosure.NOTE Additional requirements for certain specific types of assemblies are given in supplementary IEC standards.This standard applies to ASSEMBLIES intended for use in connection with the generation, transmission, distribution and conversion of electric energy, and for the control of electric energy consuming equipment.It also applies to ASSEMBLIES designed for use under special service conditions, for example in ships, in rail vehicles, for hoisting equipment or in explosive atmospheres, and for domestic (operated by unskilled persons) applications, provided that the relevant specific requirements are complied with.This standard applies also to ASSEMBLIES designed for electrical equipment of machines. However, where applicable the additional requirements of IEC 60204-1 have to be fulfilled.This standard does not apply to individual devices and self-contained components, such as motor starters, fuse switches, electronic equipment, etc. complying with their relevant standards.The object of this standard is to lay down the definitions and to state the service conditions, construction requirements, technical characteristics and tests for low-voltage switchgear and controlgear ASSEMBLIES.
信息:ICS:29.130.20 CCS:K31 发布:1999-09 实施

IEC 60439-1-1999 低压开关设备和控制设备组合装置 第1部分:已通过型式试验和部分型式试验的组合装置
简介:This International Standard applies to low-voltage switchgear and controlgear ASSEMBLIES (type-tested ASSEMBLIES (TTA) and partially type-tested ASSEMBLIES (PTTA)), the rated voltage of which does not exceed 1000 V a.c. at frequencies not exceeding 1000 Hz, or 1500 V d.c.This standard also applies to ASSEMBLIES incorporating control and/or power equipment, the frequencies of which are higher. In this case, appropriate additional requirements will apply.This standard applies to stationary or movable ASSEMBLIES with or without enclosure.NOTE Additional requirements for certain specific types of assemblies are given in supplementary IEC standards.This standard applies to ASSEMBLIES intended for use in connection with the generation, transmission, distribution and conversion of electric energy, and for the control of electric energy consuming equipment.It also applies to ASSEMBLIES designed for use under special service conditions, for example in ships, in rail vehicles, for hoisting equipment or in explosive atmospheres, and for domestic (operated by unskilled persons) applications, provided that the relevant specific requirements are complied with.This standard applies also to ASSEMBLIES designed for electrical equipment of machines. However, where applicable the additional requirements of IEC 60204-1 have to be fulfilled.This standard does not apply to individual devices and self-contained components, such as motor starters, fuse switches, electronic equipment, etc. complying with their relevant standards.The object of this standard is to lay down the definitions and to state the service conditions, construction requirements, technical characteristics and tests for low-voltage switchgear and controlgear ASSEMBLIES.
信息:ICS:29.130.20 CCS:K31 发布:1999-09 实施

IEC 60439-1-1999 低压开关设备和控制设备组合装置 第1部分:已通过型式试验和部分型式试验的组合装置
简介:This International Standard applies to low-voltage switchgear and controlgear ASSEMBLIES (type-tested ASSEMBLIES (TTA) and partially type-tested ASSEMBLIES (PTTA)), the rated voltage of which does not exceed 1000 V a.c. at frequencies not exceeding 1000 Hz, or 1500 V d.c.This standard also applies to ASSEMBLIES incorporating control and/or power equipment, the frequencies of which are higher. In this case, appropriate additional requirements will apply.This standard applies to stationary or movable ASSEMBLIES with or without enclosure.NOTE Additional requirements for certain specific types of assemblies are given in supplementary IEC standards.This standard applies to ASSEMBLIES intended for use in connection with the generation, transmission, distribution and conversion of electric energy, and for the control of electric energy consuming equipment.It also applies to ASSEMBLIES designed for use under special service conditions, for example in ships, in rail vehicles, for hoisting equipment or in explosive atmospheres, and for domestic (operated by unskilled persons) applications, provided that the relevant specific requirements are complied with.This standard applies also to ASSEMBLIES designed for electrical equipment of machines. However, where applicable the additional requirements of IEC 60204-1 have to be fulfilled.This standard does not apply to individual devices and self-contained components, such as motor starters, fuse switches, electronic equipment, etc. complying with their relevant standards.The object of this standard is to lay down the definitions and to state the service conditions, construction requirements, technical characteristics and tests for low-voltage switchgear and controlgear ASSEMBLIES.
信息:ICS:29.130.20 CCS:K31 发布:1999-09 实施

IEC 60439-5 AMD 1-1998 低压开关设备和控制设备组件.第5部分:室外公共场所安装用组件的特殊要求.网络电力分配用电缆交接箱.第1次修订
简介:
信息:ICS:29.130.20 CCS:K32;K31 发布:1998-06 实施

IEC 60439-5 AMD 1-1998 低压开关设备和控制设备组件.第5部分:室外公共场所安装用组件的特殊要求.网络电力分配用电缆交接箱.第1次修订
简介:
信息:ICS:29.130.20 CCS:K32;K31 发布:1998-06 实施

IEC 60439-5 AMD 1-1998 低压开关设备和控制设备组件.第5部分:室外公共场所安装用组件的特殊要求.网络电力分配用电缆交接箱.第1次修订
简介:
信息:ICS:29.130.20 CCS:K32;K31 发布:1998-06 实施

IEC 60439-1 AMD 2-1996 低压开关设备和控制设备组件.第1部分:经过型式试验和部分型式试验的组件.补充件2
简介:
信息:ICS:29.120.60 CCS:K31 发布:1996-11 实施

IEC 60439-1 AMD 2-1996 低压开关设备和控制设备组件.第1部分:经过型式试验和部分型式试验的组件.补充件2
简介:
信息:ICS:29.120.60 CCS:K31 发布:1996-11 实施

IEC 60439-1 AMD 2-1996 低压开关设备和控制设备组件.第1部分:经过型式试验和部分型式试验的组件.补充件2
简介:
信息:ICS:29.120.60 CCS:K31 发布:1996-11 实施

IEC 60439-4 AMD 1-1995 低压开关设备和控制设备组合装置 第4部分:施工现场用组合装置(ACS)的特殊要求 修改1
简介:
信息:ICS:29.130.20 CCS:K31 发布:1995-12 实施

IEC 60439-4 AMD 1-1995 低压开关设备和控制设备组合装置 第4部分:施工现场用组合装置(ACS)的特殊要求 修改1
简介:
信息:ICS:29.130.20 CCS:K31 发布:1995-12 实施

IEC 60439-4 AMD 1-1995 低压开关设备和控制设备组合装置 第4部分:施工现场用组合装置(ACS)的特殊要求 修改1
简介:
信息:ICS:29.130.20 CCS:K31 发布:1995-12 实施

IEC 60439-3 AMD 1-1993 Amendement 1 Ensembles d’appareillage à basse tension Troisième partie: Règles particulières pour ensembles d’appareillage BT destinés à être installés en des lieux accessibles à des personnes non qualifiées pendant leur utilisation - Tableaux de répartit
简介:
信息:ICS:/ CCS:/ 发布:1993-10-01 实施:2012-03-03

IEC 60439-3 AMD 1-1993 Amendement 1 Ensembles d’appareillage à basse tension Troisième partie: Règles particulières pour ensembles d’appareillage BT destinés à être installés en des lieux accessibles à des personnes non qualifiées pendant leur utilisation - Tableaux de répartit
简介:
信息:ICS:/ CCS:/ 发布:1993-10-01 实施:2012-03-03

IEC 60439-3 AMD 1-1993 Amendement 1 Ensembles d’appareillage à basse tension Troisième partie: Règles particulières pour ensembles d’appareillage BT destinés à être installés en des lieux accessibles à des personnes non qualifiées pendant leur utilisation - Tableaux de répartit
简介:
信息:ICS:/ CCS:/ 发布:1993-10-01 实施:2012-03-03

IEC 60439-3 AMD 1-1993 低压开关设备和控制设备组合装置 第3部分:用于安装在非熟练人员可能进入使用的场所的低压开关设备和控制设备组合装置的特殊要求 配电盘 修改1
简介:Amends subclauses 1.1, 5.1, 7.4.2.2.1, 7.4.2.2.3a), 8.2.12.5, replaces table 7 (in subclause 8.1), subclauses 8.1.1, 8.2.9, adds table 7b, subclauses 8.2.13, 8.2.14.
信息:ICS:29.130.20 CCS:K31; 发布:1993-10 实施

IEC 60439-3 AMD 1-1993 低压开关设备和控制设备组合装置 第3部分:用于安装在非熟练人员可能进入使用的场所的低压开关设备和控制设备组合装置的特殊要求 配电盘 修改1
简介:Amends subclauses 1.1, 5.1, 7.4.2.2.1, 7.4.2.2.3a), 8.2.12.5, replaces table 7 (in subclause 8.1), subclauses 8.1.1, 8.2.9, adds table 7b, subclauses 8.2.13, 8.2.14.
信息:ICS:29.130.20 CCS:K31; 发布:1993-10 实施

IEC 60439-3 AMD 1-1993 低压开关设备和控制设备组合装置 第3部分:用于安装在非熟练人员可能进入使用的场所的低压开关设备和控制设备组合装置的特殊要求 配电盘 修改1
简介:Amends subclauses 1.1, 5.1, 7.4.2.2.1, 7.4.2.2.3a), 8.2.12.5, replaces table 7 (in subclause 8.1), subclauses 8.1.1, 8.2.9, adds table 7b, subclauses 8.2.13, 8.2.14.
信息:ICS:29.130.20 CCS:K31; 发布:1993-10 实施

IEC 60439-1-1992 Amendement 2 Ensembles d'appareillage a basse tension Partie 1 : Ensembles de série et ensembles dérivés de serie (Edition 3.0; Corrigendum-1993; Amendment 1-1995; Amendment 2-1996)
简介:
信息:ICS:/ CCS:/ 发布:1992-01-01 实施:1969-12-31

IEC 60439-1-1992 Amendement 2 Ensembles d'appareillage a basse tension Partie 1 : Ensembles de série et ensembles dérivés de serie (Edition 3.0; Corrigendum-1993; Amendment 1-1995; Amendment 2-1996)
简介:
信息:ICS:/ CCS:/ 发布:1992-01-01 实施:1969-12-31

IEC 60439-1-1992 Amendement 2 Ensembles d'appareillage a basse tension Partie 1 : Ensembles de série et ensembles dérivés de serie (Edition 3.0; Corrigendum-1993; Amendment 1-1995; Amendment 2-1996)
简介:
信息:ICS:/ CCS:/ 发布:1992-01-01 实施:1969-12-31

检测标准 IEC60439-1检测标准

检测资质

权威认证,确保检测数据的准确性和可靠性

CMA认证

CMA认证

中国计量认证

CNAS认证

CNAS认证

中国合格评定国家认可委员会

ISO认证

ISO认证

质量管理体系认证

行业资质

行业资质

多项行业权威认证

了解我们

专业团队,丰富经验,为您提供优质的检测服务

了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们

先进检测设备

引进国际先进仪器设备,确保检测数据的准确性和可靠性

精密检测仪器

精密光谱分析仪

用于材料成分分析和元素检测,精度可达ppm级别

色谱分析仪器

高效液相色谱仪

用于食品安全检测和化学成分分析,分离效率高

材料测试设备

万能材料试验机

用于材料力学性能测试,可进行拉伸、压缩等多种测试

热分析仪器

差示扫描量热仪

用于材料热性能分析,测量相变温度和热焓变化

显微镜设备

扫描电子显微镜

用于材料微观结构观察,分辨率可达纳米级别

环境检测设备

气相色谱质谱联用仪

用于复杂有机化合物的分离和鉴定,灵敏度高

我们的优势

选择中科光析,选择专业与信赖

权威资质

具备CMA、CNAS等多项国家级资质认证,检测报告具有法律效力

先进设备

引进国际先进检测设备,确保检测数据的准确性和可靠性

专业团队

拥有经验丰富的检测工程师和技术专家团队

快速响应

7×24小时服务热线,快速响应客户需求,及时出具检测报告

需要专业检测服务?

我们的专业技术团队随时为您提供咨询和服务支持,欢迎随时联系我们

在线咨询工程师

定制实验方案

24小时专业客服在线

需要检测服务?

专业工程师在线解答

400-640-9567

全国服务热线

查看报告模版