gc气相检测标准gc气相-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

gc气相相关标准参考信息

GB/T 37185-2018 气体分析室内挥发性有害有机物的测定 “SUMMA罐-硅烷化管”采样气相色谱/质谱联用（GC/MS）法
简介：
信息：ICS：71.040.40 CCS：G86 发布：2018-12-28 实施：2019-11-01 00:00:00.0

ASTM D6843-10(2015) 橡胶制剂中使用的硅烷的标准试验方法（b-（三乙氧基甲硅烷基丙基）硫烷）:气相色谱（GC）
简介：
信息：ICS：71.040.40 CCS：发布：2015-06-01 实施：

BS EN 12393-2-2013 植物源食品.通过气相色谱(GC)或液相色谱-质谱联用/质谱(LC-MS/MS)法测定农药残留物的多种残留法.萃取和提纯方法
简介：
信息：ICS：67.050 CCS：X04 发布：2013-11-30 实施：2013-11-30

IEC 62321-3-3:2021 电工产品中某些物质的测定.第3-3部分:筛选.使用热解/热脱附附件（Py/TD？GC？MS）通过气相色谱-质谱法测定聚合物中的多溴联苯、多溴二苯醚和邻苯二甲酸酯
简介：
信息：ICS：43.040.10 CCS：发布：2021-09-14 实施：

ASTM D7798-2015 使用超快速气相色谱法 (UF GC) 对最终沸点高达538 ℃的石油馏分的沸程分布的标准试验方法
简介：5.1x00a0;The boiling range distribution of petroleum distillate fractions provides an insight into the composition of feed stocks and products related to petroleum refining processes. A major advantage of the fast analysis time obtained by this test method is increasing product through put and reduced lab testing time by a minimum factor of 3. This gas chromatographic determination of boiling range may be used to replace conventional distillation methods for control of refining operations and for product specification testing with the mutual agreement of interested parties. 5.2x00a0;Boiling range distributions obtained by this test method are essentially equivalent to those obtained by true boiling point (TBP) distillation (see Test Method D2892). They are not equivalent to results from low efficiency distillations such as those obtained with Test Method D86 or D1160. 1.1x00a0;This test method covers the determination of the boiling range distribution of petroleum products and biodiesel formulations, B5, B10, and B20. It is applicable to petroleum distillates having a final boiling point not greater than 5388201;x00b0;C or lower at atmospheric pressure as measured by this test method. The difference between the initial boiling point and the final boiling point shall be greater than 558201;x00b0;C. 1.2x00a0;The test method is not applicable for analysis of petroleum distillates containing low molecular weight components (for example naphthas, reformates, gasolines, full range crude oils). Materials containing heterogeneous mixtures (for example, alcohols, ethers, acids or esters, except biodiesels) or residue are not to be analyzed by this test method. See Test Methods D3710, D7096, D6352, or D7169. 1.3x00a0;This test method uses the principles of simulated distillation methodology. This test method uses gas chromatographic components that allow the entire analysis from sample to sample to occur in 58201;min or less. In these instruments the column is heated directly at rates 10 to 15 times that of a conventional gas chromatograph and thus the analysis time is reduced from sample to sample. 1.4x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4.1x00a0;Exceptionx2014;Appendix X1 includes temperatures in Fahrenheit for information only. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.080 CCS：发布：2015 实施：

BS EN 12393-3-2013 植物源食品.通过气相色谱(GC)或液相色谱-质谱联用/质谱(LC-MS/MS)法测定农药残留物的多种残留法.测定和确认试验
简介：
信息：ICS：67.050 CCS：X04 发布：2013-11-30 实施：2013-11-30

IEC 62321-3-3-2021 电工产品中某些物质的测定.第3-3部分:筛选.使用热解/热脱附附件（Py/TD？GC？MS）通过气相色谱-质谱法测定聚合物中的多溴联苯、多溴二苯醚和邻苯二甲酸酯
简介：
信息：ICS：43.040.10 CCS：发布：2021-09-14 实施：

DIN ISO 11916-2-2014 土质. 选定的炸药和相关化合物的测定. 第2部分: 使用带电子俘获探测 (ECD) 或质谱检测 (MS) 的气相色谱 (GC) 法 (ISO 11916-2-2013)
简介：
信息：ICS：13.080.10 CCS：B11 发布：2014-11 实施：

BS EN 12393-1-2013 植物食品. 利用气相色谱法(GC)或液相色谱-质谱联用/质谱法(LC-MS/MS)测定农药残留物的多种残留法. 一般考虑
简介：
信息：ICS：67.050 CCS：X04 发布：2013-11-30 实施：2013-11-30

ASTM D6843-10(2019) 橡胶制剂中使用的硅烷的标准试验方法（b-（三乙氧基甲硅烷基丙基）硫烷）:气相色谱（GC）
简介：
信息：ICS：71.040.40 CCS：发布：2019-11-01 实施：

LST EN 12393-3-2014 植物食品. 气相色谱(GC)或液相色谱-质谱联用/质谱法(LC-MS/MS)测定农药残留物用多种残留检测法. 第3部分: 测定和证实试验
简介：
信息：ICS：67.050 CCS：发布：2014-03-17 实施：

ISO 13914:2013 土壤质量——气相色谱-高分辨率质量选择检测法（GC/HRMS）测定二恶英、呋喃和类二恶英多氯联苯
简介：
信息：ICS：13.080.10 CCS：发布：2013-11-20 实施：

ISO 20163-2019 硫化橡胶 - 通过气相色谱（Gc）和高效液相色谱（Hplc）测定游离硫
简介：
信息：ICS：83.060 CCS：发布：2019-07-24 实施：

LST EN 12393-1-2014 植物食品. 气相色谱(GC)或液相色谱-质谱联用/质谱法(LC-MS/MS)测定农药残留物用多种残留检测法. 第1部分: 常规考虑事项
简介：
信息：ICS：67.050 CCS：发布：2014-03-17 实施：

NF X31-404-2-2013 土质 - 选定的炸药和相关化合物的测定 - 第2部分: 使用带电子俘获探测 (ECD) 或质谱检测 (MS) 的气相色谱 (GC) 法
简介：
信息：ICS：13.080.10 CCS：Z13 发布：2013-10-11 实施：2013-10-11

ISO 16000-33-2017 室内空气 - 第33部分:气相色谱/质谱法测定邻苯二甲酸酯（GC/MS）
简介：
信息：ICS：13.040.20 CCS：发布：2017-08-10 实施：

ISO 13913:2014 土壤质量——使用毛细管气相色谱-质谱检测（GC/MS）测定选定的邻苯二甲酸酯
简介：
信息：ICS：13.080.10 CCS：发布：2014-02-07 实施：

BS ISO 11916-2-2013 土质.选定的炸药和相关化合物的测定.使用带电子俘获探测(ECD)或质谱检测(MS)的气相色谱(GC)法
简介：
信息：ICS：13.080.10 CCS：Z18 发布：2013-09-30 实施：2013-09-30

ASTM E1642-00(2016) 气相色谱红外（GC/IR）分析的一般技术标准实践
简介：
信息：ICS：71.040.50 CCS：发布：2016-04-01 实施：

ISO 13859:2014 土壤质量.用气相色谱法（GC）和高效液相色谱法（HPLC）测定多环芳烃（PAH）
简介：
信息：ICS：13.080.10 CCS：发布：2014-02-03 实施：

XP X31-430-2-2016 土壤质量. 基于风险的石油烃. 第2部分: 采用焰离子化检测气相色谱法 (GC/FID) 测定半挥发性石油烃的脂族和芳香族馏分
简介：
信息：ICS：13.080.10 CCS：发布：2016-03-09 实施：2016-03-09

ISO 13859-2014 土壤质量. 利用气相质谱法 (GC) 和高性能液相色谱法 (HPLC) 进行多环芳烃 (PAH) 的测定
简介：
信息：ICS：13.080.10 CCS：B11 发布：2014-02 实施：

ISO 11916-2-2013 土质. 选定爆炸物和相关化合物的测定. 第2部分: 带电子捕获检测(ECD)或者质谱检测(MS)的气相色谱法(GC)的使用方法
简介：This part of ISO 11916 specifies the measurement of explosive and related compounds (nitroaromatics and nitroamines, as given in Table 1) in soils and soil materials. This part of ISO 11916 is intended for the trace analysis of explosives and related compounds by gas chromatography (GC) using electron capture detector(s) (ECD) or a mass spectrometer (MS) as detector.
信息：ICS：13.080.10 CCS：Z13 发布：2013-09 实施：

BS PD CEN ISO/TS 16558-2-2015 土质. 基于风险的石油烃. 使用带有火焰离子化检测器的气相色谱法 (GC/FID) 测定半挥发性石油烃的脂族和芳烃组分
简介：
信息：ICS：13.080.10 CCS：发布：2015-09-30 实施：2015-09-30

ISO 13913-2014 土质.使用带有质谱检测的毛细管气相色谱法(GC/MS)对选定邻苯二甲酸盐的测定
简介：
信息：ICS：13.080.10 CCS：Z18 发布：2014-02 实施：

ISO 11916-2:2013 土壤质量——选定炸药和相关化合物的测定Spart 2:使用气相色谱（GC）和电子捕获检测（ECD）或质谱检测（MS）的方法
简介：
信息：ICS：13.080.10 CCS：发布：2013-08-27 实施：

DIN EN 12393-2-2014 食用植物的食品.气相色谱(GC)或液相色谱-质谱联用/质谱法(LC-MS/MS)测定农药残留物用多种残留法.第2部分:萃取和净化方法.德文版本EN 12393-2-2013
简介：
信息：ICS：67.050 CCS：X04 发布：2014-01 实施：

NF M07-148-2013 石油产品 - 填充油中苯并芘 (BaP) 和选定的多环芳香烃 (PAH)含量的测定 - 使用双液相 (LC) 清洗和气相色谱/质谱 (GC/MS) 分析规程
简介：
信息：ICS：75.100 CCS：E30 发布：2013-07-19 实施：2013-07-19

EN ISO/TS 16558-2-2015 土壤质量.基于风险的石油烃.第2部分:采用具有火焰离子化检测器(GC/FID)的气相色谱对脂肪族和芳香族半挥发性石油烃的测定
简介：
信息：ICS：13.080.10 CCS：B10 发布：2015-09-01 实施：

DIN EN 12393-1-2014 植物食品.利用气相色谱(GC)或液相色谱-质谱联用/质谱法(LC-MS/MS)测定农药残留物的多种残留法.第1部分:总则.德文版本EN 12393-1-2013
简介：
信息：ICS：67.050 CCS：X04 发布：2014-01 实施：

DIN EN 16143-2013 石油产品.填充油中苯并芘(BaP)和选定的多环芳烃(PAH)含量的测定.使用双液相(LC)清洗和气相/质谱(GC/MS)分析的规程.德文版本EN 16143-2013
简介：
信息：ICS：75.100 CCS：E34 发布：2013-05 实施：

BS PD ISO/TS 16780-2015 水质. 多氯萘 (PCN) 的测定. 气相色谱 (GC) 和质谱法 (MS)
简介：
信息：ICS：13.060.50 CCS：发布：2015-08-31 实施：2015-08-31

GOST EN 12766-3-2014 石油产品和废油. 多氯联二苯 (PCB) 和相关产品的测定. 第3部分. 用电子俘获探测器 (ECD) 的气相色谱法 (GC) 测定和量化多氯三联苯 (PCT) 和多氯甲苯 (PCBT) 的含量
简介：
信息：ICS：75.080;75.100 CCS：发布：2014 实施：2016-07-01

BS EN 16143-2013 石油产品.填充油中苯并芘(BaP)和选定的多环芳烃(PAH)的含量测定.使用双液相(LC)清洗和气相色谱-质谱(GC/MS)分析规程
简介：
信息：ICS：75.100 CCS：E30 发布：2013-02-28 实施：2013-02-28

BS ISO 18363-1-2015 动植物油脂. 采用气相色谱/质谱联用法 (GC/MS) 测定脂肪酸氯丙醇 (MCPD) 和缩水甘油. 采用快速碱酯交换和测量法测定三氯丙二醇和用差分测量法测定缩水甘油
简介：
信息：ICS：67.200.10 CCS：发布：2015-08-31 实施：2015-08-31

GOST EN 12766-1-2014 石油产品和废油. 多氯联二苯 (PCB) 和相关产品的测定. 第1部分. 通过有电子俘获探测器 (ECD) 的气相色谱法 (GC) 分离和测定选择的多氯联二苯同种类物
简介：
信息：ICS：75.080;75.100 CCS：发布：2014 实施：2016-07-01

EN 12393-1-2013 植物食品.利用气相色谱(GC)或液相色谱-质谱联用/质谱法(LC-MS/MS)测定农药残留物的多种残留法.第1部分:总则
简介：This European Standard gives general considerations for the determination of pesticide residues in foods of plant origin. Each method specified in this European Standard is suitable for identifying and quantifying a definite range of those organohalogen, and/or organophosphorus and/or organonitrogen pesticides which occur as residues in foodstuffs of plant origin. This European Standard contains the following methods that have been subjected to interlaboratory studies and/or are adopted throughout Europe: method M: Extraction with acetone and liquid-liquid partition with dichloromethane/light petroleum, if necessary clean-up on Florisil; method N: Extraction with acetone, liquid-liquid partition with dichloromethane or cyclohexane/ethyl acetate and clean-up with gel permeation and silica gel chromatography; method P: Extraction with ethyl acetate and, if necessary, clean-up with gel permeation chromatography. The applicability of the three methods M, N and P for residue analysis of organohalogen, organophosphorus and organonitrogen pesticides, respectively, is given for each method.
信息：ICS：67.050 CCS：X04 发布：2013 实施：2013-11

BS PD ISO/TS 16780-2015 水质. 多氯萘 (PCN) 的测定. 气相色谱 (GC) 和质谱法 (MS)
简介：
信息：ICS：13.060.50 CCS：Z16 发布：2015-08-31 实施：2015-08-31

BS ISO 13914-2013 土质.利用带高分辨率质谱选择性检测仪的气相色谱法(GC/HRMS)对二噁英、呋喃和二噁英类似多氯联苯的测定
简介：
信息：ICS：13.080.10 CCS：Z18 发布：2013-12-31 实施：2013-12-31

ASTM UOP690-2013 通过气相色谱法(GC)测定不含烯烃的汽油中的辛烷和低沸点烃类
简介：This gas chromatographic method is for determining C8 and lower boiling paraffins and naphthenes in hydrocarbons containing less than 2 mass-% olefins (see Note 1) having a maximum final boiling point of 260癈. Benzene and toluene are also determined. Certain non-aromatic components of interest are reported as composites and C8 aromatics are not determined (see Note 2). The quantitation limit for any reported component is 0.01 mass-%.
信息：ICS： CCS：E31 发布：2013 实施：

BS ISO 18363-1-2015 动植物油脂. 采用气相色谱/质谱联用法 (GC/MS) 测定脂肪酸氯丙醇 (MCPD) 和缩水甘油. 采用快速碱酯交换和测量法测定三氯丙二醇和用差分测量法测定缩水甘油
简介：
信息：ICS：67.200.10 CCS：X14 发布：2015-08-31 实施：2015-08-31

EN 12393-2-2013 植物食品.利用气相色谱(GC)或液相色谱-质谱联用/质谱法(LC-MS/MS)测定农药残留物的多种残留法.第2部分:萃取和净化方法
简介：This European Standard specifies methods for the extraction and clean-up of food samples of plant origin for quantitative determination of pesticide residues. Different solvents can be used for this purpose. These pesticide residues are generally associated with other co-extracted compounds which would interfere in the analysis. To purify the crude extracts to be analysed, several techniques can be used. This European Standard contains the following extraction and clean-up methods that have been subjected to interlaboratory studies and/or are adopted throughout Europe: method M: Extraction with acetone and liquid-liquid partition with dichloromethane/light petroleum, if necessary clean-up on Florisil; method N: Extraction with acetone, liquid-liquid partition with dichloromethane or cyclohexane/ethyl acetate and clean-up with gel permeation and silica gel chromatography; method P: Extraction with ethyl acetate, and if necessary, clean-up by gel permeation chromatography. This European Standard specifies the details of methods M, N and P for the extraction and the clean-up of food samples of plant origin. Several solvents at different volumes are used for extraction. Techniques of clean-up are listed such as liquid-liquid partition, liquid chromatography on various adsorbents and gel permeation chromatography. A table providing the couples (matrix/pesticide) which have been submitted to collaborative studies and a list of indicative applicability of the method to different pesticides are given for each method, wherever possible.
信息：ICS：67.050 CCS：X04 发布：2013 实施：2013-11

ISO/TS 16780:2015 水质 - 多氯萘（PCN）的测定 - 使用气相色谱（GC）和质谱（MS）的方法
简介：
信息：ICS：13.060.50 CCS：发布：2015-08-14 实施：

NF V03-090-2-2013 植物食品 - 气相色谱 (GC) 或液相色谱-质谱联用/质谱法 (LC-MS/MS) 测定农药残留物用多种残留检测法 - 第2部分: 萃取和清理法
简介：
信息：ICS：67.050 CCS：X04 发布：2013-12-13 实施：2013-12-13

ASTM D7798-2013 用超快速气相色谱法 (UF GC) 对最终沸点高达538℃的石油馏分的沸程划分的标准试验方法
简介：5.1x00a0;The boiling range distribution of petroleum distillate fractions provides an insight into the composition of feed stocks and products related to petroleum refining processes. A major advantage of the fast analysis time obtained by this test method is increasing product through put and reduced lab testing time by a minimum factor of 3. This gas chromatographic determination of boiling range may be used to replace conventional distillation methods for control of refining operations and for product specification testing with the mutual agreement of interested parties. 5.2x00a0;Boiling range distributions obtained by this test method are essentially equivalent to those obtained by true boiling point (TBP) distillation (see Test Method D2892). They are not equivalent to results from low efficiency distillations such as those obtained with Test Method D86 or D1160. 1.1x00a0;This test method covers the determination of the boiling range distribution of petroleum products and biodiesel formulations, B5, B10, and B20. It is applicable to petroleum distillates having a final boiling point not greater than 538x00b0;C or lower at atmospheric pressure as measured by this test method. The difference between the initial boiling point and the final boiling point shall be greater than 55x00b0;C. 1.2x00a0;The test method is not applicable for analysis of petroleum distillates containing low molecular weight components (for example naphthas, reformates, gasolines, full range crude oils). Materials containing heterogeneous mixtures (for example, alcohols, ethers, acids or esters, except biodiesels) or residue are not to be analyzed by this test method. See Test Methods D3710, D7096, D6352, or D7169. 1.3x00a0;This test method uses the principles of simulated distillation methodology. This test method uses gas chromatographic components that allow the entire analysis from sample to sample to occur in 5 min or less. In these instruments the column is heated directly at rates 10x2013;15 times that of a conventional gas chromatograph and thus the analysis time is reduced from sample to sample. 1.4x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4.1x00a0;Exceptionx2014;Appendix X1 includes temperatures in Fahrenheit for information only. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and hea......
信息：ICS：75.080 (Petroleum products in general) CCS：发布：2013 实施：

ISO/TS 16558-2:2015 土壤质量 - 基于风险的石油烃 - 第2部分:使用气相色谱与火焰离子化检测（Gc/Fid）测定半挥发性石油烃的脂肪族和芳族馏分
简介：
信息：ICS：13.080.10 CCS：发布：2015-08-10 实施：

NF V03-090-1-2013 植物食品. 利用气相色谱法(GC)或液相色谱-质谱联用/质谱法(LC-MS/MS)测定农药残留物的多种残留法. 第1部分: 一般考虑
简介：
信息：ICS：67.050 CCS：X04 发布：2013-12-13 实施：2013-12-13

ASTM D7828-2012 用自动热解吸/气相色谱法 (ATD/GC) 测定液化石油气 (LPG) 中残基组成的标准试验方法
简介：5.1x00a0;Residue in LPG is a contaminant that can lead to operational problems in some end use applications. Engines, micro-turbines, fuel cells and other equipment may be sensitive to residue levels as low as 10 mg/kg. 5.2x00a0;Contamination of LPG can occur during production, transport, delivery, storage and use. A qualitative indication of the contaminants can help track down the source of the contamination from manufacture, through the distribution system, and to the end user. 5.3x00a0;This test method is designed to provide a lower detection limit, wider dynamic range, and better accuracy than gravimetric methods like Test Method D2158. 5.4x00a0;This test method can be performed with little or no discharge of LPG vapors, compared to Test Method D2158 which requires evaporation of 100 mL of sample per test. 5.5x00a0;Sampling for residue in LPG using sorbent tubes can be performed in the field, and the sorbent tubes sent to a laboratory for analysis. This saves significant costs in shipping (weight of tube is approximately 10 grams), and is much safer and easier than transporting LPG cylinders. 5.6x00a0;This test method determines total residues from C6 to C40, compared to a thermal gravimetric residue method such as Test Method D2158 which heat the residue to 38x00b0;C, resulting in a lower recovery due to loss of lighter residue components. 5.7x00a0;If there is a need to decrease the detection limit of residue or individual compounds of interest below 10 x00b5;g/g, the procedures in this test method can be modified to achieve 50 times enhanced detection limit, or 0.2 x00b5;g/g. 1.1x00a0;This test method covers the determination of residue in LPG by automated thermal desorption/gas chromatography (ATD/GC) using flame ionization detection (FID). 1.2x00a0;The quantitation of residue covers a component boiling point range from 69x00b0;C to 522x00b0;C, equivalent to the boiling points of C6 through C40 n-paraffins. 1.2.1x00a0;The boiling range covers possible LPG contaminants such as gasoline, diesel fuel, phthalates and compressor oil. Qualitative information on the nature of the residue can be obtained from this test method. 1.2.2x00a0;Materials insoluble in LPG and components which do not elute from the gas chromatograph or which have no response in a flame ionization detector are not determined. 1.2.3x00a0;The reporting limit (or limit of quantitation) for total residue is 6.7 x00b5;g/g. 1.2.4x00a0;The dynamic ......
信息：ICS：75.160.30 (Gaseous fuels) CCS：E46 发布：2012 实施：

ISO/TS 16780-2015 水质. 多氯萘 (PCN) 的测定. 气相色谱 (GC) 和质谱法 (MS)
简介：
信息：ICS：13.060.50 CCS：发布：2015-08 实施：

NF V03-090-3-2013 植物源食品.通过气相色谱法(GC)或液相色谱-质谱/质谱法(LC-MS/MS)测定杀虫剂残留物中多残留法.第3部分:测定和证实试验
简介：
信息：ICS：67.050 CCS：X04 发布：2013-12-13 实施：2013-12-13

ASTM D6843-10 橡胶配方中使用的硅烷的标准试验方法（双-（三乙氧基硅丙基）硫酸盐）:气相色谱法（GC）表征
简介：
信息：ICS：71.040.40 CCS：发布：2010-06-01 实施：

ISO/TS 16558-2-2015 土质. 基于风险的石油烃. 第2部分: 使用带有火焰离子化检测器的气相色谱法 (GC/FID) 测定半挥发性石油烃的脂族和芳烃组分
简介：
信息：ICS：13.080.10 CCS：发布：2015-08 实施：

DIN CEN/TS 16181-2013 污泥, 经处理生物废弃物和土壤. 采用气相色谱法(GC)和高效液相色谱法(HPLC)对多环芳香烃(PAH)的测定; 德文版本CEN/TS 16181-2013
简介：
信息：ICS：13.030.20 CCS：Z13 发布：2013-12 实施：

ASTM E1642-00(2010) 气相色谱红外（GC/IR）分析的一般技术标准实践
简介：
信息：ICS：71.040.50 CCS：发布：2010-03-01 实施：

ISO 18363-1-2015 动植物油脂. 采用气相色谱/质谱联用法 (GC/MS) 测定脂肪酸氯丙醇 (MCPD) 和缩水甘油. 第1部分: 采用快速碱酯交换和测量法测定三氯丙二醇和用差分测量法测定缩水甘油
简介：
信息：ICS：67.200.10 CCS：发布：2015-08 实施：

ISO 13914-2013 土质.利用带高分辨率质谱选择性检测仪的气相色谱法(GC/HRMS)对二噁英、呋喃和二噁英类似多氯联苯的测定
简介：This International Standard specifies a method for quantitative determination of 17 2,3,7,8-chlorine substituted dibenzo-p-dioxins and dibenzofurans and dioxin-like polychlorinated biphenyls in sludge,treated biowaste, and soil using liquid column chromatographic clean-up methods and GC/HRMS.
信息：ICS：13.080.10 CCS：Z18 发布：2013-12 实施：

ASTM D6843-2010(2015) 橡胶配方 (双-(三甲氧基硅基)硫烷) 中使用硅烷的标准试验方法: 采用气相色谱法 (GC) 的特性描述
简介：5.1x00a0;The amount of volatile components reflects the impurity level in the product, and as a consequence, its behavior in a rubber mixture. 1.1x00a0;This test method covers the characterization of silanes of the type bis-(triethoxysilylpropyl)sulfanes by gas chromatography. 1.2x00a0;The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：71.040.40;71.040.50 CCS：发布：2010 实施：