



密度检测相关标准参考信息
GB/T 35386-2017 无损检测 工业计算机层析成像(CT)检测用密度分辨力测试卡
简介:
信息:ICS:19.100 CCS:J04 发布:2017-12-29 实施:2018-04-01 00:00:00.0
YS/T 587.9-2006 炭阳极用煅后石油焦检测方法.第9部分:真密度的测定
简介:本部分规定了炭阳极用煅后石油焦真密度的测定方法。 本部分适用于炭阳极用煅后石油焦真密度的测定。
信息:ICS:71.100.10 CCS:Q52 发布:2006-05-25 实施:2006-12-01
JUS D.A8.064-1985 胶合板检测.密度测定
简介:
信息:ICS: CCS: 发布:1985-01-01 实施:
GB/T 35386-2017 无损检测 工业计算机层析成像(CT)检测用密度分辨力测试卡
简介:
信息:ICS:19.100 CCS:J04 发布:2017-12-29 实施:2018-04-01 00:00:00.0
YS/T 587.10-2006 炭阳极用煅后石油焦检测方法.第10部分:体积密度的测定
简介:本部分规定了炭阳极用煅后石油焦体积密度的测定方法。 本部分适用于炭阳极用煅后石油焦体积密度的测定。
信息:ICS:71.100.10 CCS:Q52 发布:2006-05-25 实施:2006-12-01
SIS SS IEC 692-1984 核检测仪表.致电离辐射密度检测仪.说明及检测方法
简介:
信息:ICS: CCS: 发布:1984-9-15 实施:
GB/T 35390-2017 无损检测 弹药密度工业计算机层析成像(CT)检测方法
简介:
信息:ICS:19.100 CCS:J04 发布:2017-12-29 实施:2018-04-01 00:00:00.0
YS/T 63.9-2006 铝用炭素材料检测方法.第9部分:真密度的测定.氦比重计法
简介:本部分规定了用氮比重计测定铝用炭素材料密度的方法。 本部分适用于铝用炭素材料真密度的测定。
信息:ICS:71.100.10 CCS:Q52 发布:2006-05-25 实施:2006-12-01
JUS D.A8.085-1984 纤维建筑板材检测.密度测定
简介:
信息:ICS: CCS: 发布:1984-01-01 实施:
T/CASAS 013-2021 碳化硅晶片位错密度检测方法 KOH腐蚀结合图像识别法
简介:碳化硅(这里指4H-SiC)材料作为重要的第三代宽禁带半导体材料,具有高临界击穿场强、高的热导率、高的电子饱和漂移速率、优越的机械特性和物理、化学稳定性等特点,可用于制作高温大功率器件。近年,随着单晶和外延薄膜生长技术的不断发展,SiC单极型器件譬如肖特基二极管(SBD)及金属氧化物场效应晶体管(MOSFET)已经商业化,在不同应用领域的需求急剧增加。然而,由于材料中高密度位错缺陷的存在(典型值为103-104个/cm2),限制了其进一步的发展。SiC晶体中位错主要有三种类型:螺位错(TSD)、刃位错(TED)和基平面位错(BPD)。在衬底上进行同质外延时,衬底中的位错缺陷会向外延层中延伸和转化,导致外延层中大量扩展型缺陷。例如,衬底中的螺位错可以作为外延层中胡萝卜缺陷的成核中心,衬底中的螺位错转化为外延层中的弗兰克型层错(FrankSFs),衬底中的基平面位错大部分转化为刃位错、部分螺旋特征的BPD直接延伸到外延层中。这些缺陷的存在严重影响了SiC功率器件的性能,导致器件参数退化,特别是使得SiC高功率器件的优越特性无法得以实现。因此,对位错缺陷进行有效的表征与分析对单晶工艺及外延工艺改进优化进而提高器件性能至关重要。位错具有随机分布且密度量级大的特征,随着单晶尺寸的增大,人工统计位错密度的困难增加,过少的统计区域则又无法代表整个晶片的位错密度,因此需要依靠设备自动化来统计位错密度。目前我国以KOH腐蚀结合图像识别法检测和统计位错密度的标准属于空白领域,因此特制定本标准。
信息:ICS:31-030 CCS:C398 发布:2021-11-01 实施:2021-11-04
YS/T 63.1-2006 铝用炭素材料检测方法 第1部分:阴极糊试样焙烧方法、焙烧失重的测定及生坯试样表观密度的测定
简介:本部分规定了阴极糊生坯试样的制备方法以及制备后的焙烧过程,同时还规定了生坯试样表观密度的测定以及焙烧过程中质量损失的测定。 本部分适用于阴极糊试样的焙烧制备,该试样可用于测定表观密度、抗压强度、气孔率等。
信息:ICS:29.050 CCS:Q52 发布:2006-03-07 实施:2006-08-01
JUS D.C8.114-1983 碎料板检测.密度测定
简介:
信息:ICS: CCS: 发布:1983-01-01 实施:
313药典 四部-2020 4000 药包材检测方法 4012药包材密度测定法
简介:无
信息:ICS: CCS: 发布:2020-06-24 实施:2020-12-30
YS/T 63.7-2006 铝用炭素材料检测方法 第7部分:表观密度的测定 尺寸法
简介:本部分规定了铝用炭素材料表观密度的测定方法,同时也规定了全气孔率的计算方法。 本部分适用于用尺寸法测定炭素材料的表观密度和计算全气孔率。本方法适用于形状简单或具有规则几何形态(圆柱体、立方体等)且表面(轮廓)光滑的样品。
信息:ICS:71.100.10 CCS:Q52 发布:2006-03-07 实施:2006-08-01
JUS H.M8.114-1982 橡胶工业用辅助材料的检测.粒化炭黑松装密度的测定
简介:
信息:ICS: CCS: 发布:1982-01-01 实施:
T/IAWBS 010-2019 碳化硅单晶抛光片表面质量和微管密度检测方法-激光散射检测法
简介:随着SiC产业的发展,获得完美表面的SiC单晶抛光片已成为碳化硅材料应用的关键环节之一。为了制造高性能的SiC电力电子器件,要求晶片晶格完整,具有平整度极高的无损伤超平滑表面,且无晶向偏差。因为即使表面存在微小缺陷,都会破坏晶体材料的表面性能,甚至导致结晶构造的变化,影响器件的电学性能。现行的测试方法主要是在漫反射条件下依据目测观察,而SiC单晶抛光片的表面存在着颗粒、划痕、凹坑等缺陷,依靠人为目测,会存在较大误差。本标准采用先进仪器,客观的表征SiC单晶抛光片表面的划痕、颗粒、凹坑等缺陷。
信息:ICS:29.045 CCS:C398 发布:2019-12-27 实施:2019-12-30
JIS R6125-2005 人造磨料密度的检测方法
简介:この規格は,人造研削材の密度の測定方法について規定する。
信息:ICS:25.100.70 CCS:J43 发布:2005-06-20 实施:
JUS B.B8.101-1982 矿物填料检测.填料密度测定
简介:
信息:ICS: CCS: 发布:1982-01-01 实施:
YS/T 63.1-2019 铝用炭素材料检测方法 第1部分:阴极糊试样焙烧方法、焙烧失重的测定及生坯试样表观密度的测定
简介:
信息:ICS:71.100.10 CCS:Q52 发布:2019-08-02 实施:2020-01-01
ASTM D6347/D6347M-2005(2010) 用核反向散射深度密度法检测煤的堆密度的标准试验方法
简介:The measured mean bulk density of a coal stockpile is used with a measurement of the stockpile volume per Test Method D6172. Procedures to determine the quantity of stockpiled coal. This measure of quantity is often used as a reference value for adjusting inventory records.1.1 This test method covers procedures for determining the bulk density of coal using instrumentation that measures the relative backscatter of nuclear gamma radiation throughout the depth of the stockpile under test. 1.2 This procedure is applicable to all ranks of coal. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. The equipment uses radioactive materials, which may be hazardous to the health of users, unless proper precautions are taken.
信息:ICS:17.060;73.040 CCS:D21 发布:2005 实施:
JUS H.B8.763-1982 农药检测.散装密度
简介:
信息:ICS: CCS: 发布:1982-01-01 实施:
ASTM C1785-2017 金属保护层防潮材料针孔检测密度的标准试验方法
简介:5.1x00a0;Corrosion on the interior surface of metal jacketing can be caused by the formation of a galvanic cell between the dissimilar metals of the pipe and jacket or by crevice or pitting corrosion. 5.2x00a0;The application of a moisture barrier to the interior surface of the metal jacketing inhibits this corrosion by interfering with the galvanic cell formation or by preventing water from contacting the interior metal surface. 5.3x00a0;Holes in the moisture barrier decrease its effectiveness in preventing corrosion. Large holes, scratches, or tears in the moisture barrier visible to the naked eye are easily discerned and are cause for rejection of the metal jacketing. 5.4x00a0;Small holes called pinholes or holidays that are not visible to the naked eye but are large enough to allow corrosion are a significant concern and should be avoided to the extent possible. 5.5x00a0;This test method is used to quantify the concentration of pinhole detections present in a moisture barrier for the purpose of quality control on metal jacketing with an applied moisture barrier. 5.6x00a0;Examples of standards which have specific requirements for the maximum allowable concentration of pinhole detections in the moisture barrier are Specifications C1729 and C1767. 1.1x00a0;This test method covers the determination of the concentration of pinhole detections in a moisture barrier film or coating that is applied to the interior surface of metal jacketing. 1.2x00a0;Since this method relies on the completion through the metal jacketing of an electrical circuit, this method is only applicable to jacketing that is electrically conductive and has a moisture barrier applied which is not electrically conductive. 1.3x00a0;The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5x00a0;This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
信息:ICS:29.035.01 ; 91.100.60 CCS:Q25 发布:2017 实施:
KS M 1968-2002 工业用乙醛.密度检测(15℃)
简介:이 규격은 15℃에서 공업용 아세트알데히드(CH3CHO)의 밀도 측정 방법을 규정한다.
信息:ICS:71.080.80 CCS:G60 发布:2002-11-09 实施:2002-11-09
MSZ 15747/3-1982 陶瓷电车绝缘子原材料检测.机构的定义密度和开放的孔隙度
简介:
信息:ICS: CCS: 发布:1982 实施:
YS/T 587.10-2016 炭阳极用煅后石油焦检测方法 第10部分:振实密度的测定
简介:
信息:ICS:77.100.10 CCS:Q52 发布:2016-04-05 实施:2016-09-01
KS M 1968-2002 工业用乙醛.密度检测(15℃)
简介:이 규격은 15℃에서 공업용 아세트알데히드(CH3CHO)의 밀도 측정 방법을 규정한다.
信息:ICS:71.080.80 CCS:G60 发布:2002-11-09 实施:2002-11-09
MSZ 11779/8-1982 检测模式的韧皮纤维的定义,纤维平均长度的技术韧皮纤维和他的直系密度
简介:
信息:ICS: CCS: 发布:1982 实施:
ASTM C1785-2016 金属保护层防潮材料针孔检测密度的标准试验方法
简介:5.1x00a0;Corrosion on the interior surface of metal jacketing can be caused by the formation of a galvanic cell between the dissimilar metals of the pipe and jacket or by crevice or pitting corrosion. 5.2x00a0;The application of a moisture barrier to the interior surface of the metal jacketing inhibits this corrosion by interfering with the galvanic cell formation or by preventing water from contacting the interior metal surface. 5.3x00a0;Holes in the moisture barrier decrease its effectiveness in preventing corrosion. Large holes, scratches, or tears in the moisture barrier visible to the naked eye are easily discerned and are cause for rejection of the metal jacketing. 5.4x00a0;Small holes called pinholes or holidays that are not visible to the naked eye but are large enough to allow corrosion are a significant concern and should be avoided to the extent possible. 5.5x00a0;This test method is used to quantify the concentration of pinhole detections present in a moisture barrier for the purpose of quality control on metal jacketing with an applied moisture barrier. 5.6x00a0;Examples of standards which have specific requirements for the maximum allowable concentration of pinhole detections in the moisture barrier are Specifications C1729 and C1767. 1.1x00a0;This test method covers the determination of the concentration of pinhole detections in a moisture barrier film or coating that is applied to the interior surface of metal jacketing. 1.2x00a0;Since this method relies on the completion through the metal jacketing of an electrical circuit, this method is only applicable to jacketing that is electrically conductive and has a moisture barrier applied which is not electrically conductive. 1.3x00a0;The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息:ICS:29.035.01 ; 91.100.60 CCS: 发布:2016 实施:
SNI 03-6756-2002 沥青硬化密度级别检测方法
简介:
信息:ICS:93.080.20 CCS: 发布:2002 实施:
MSZ 14043/5-1980 土地机械检测.土质密度
简介:
信息:ICS: CCS: 发布:1980 实施:
NY/T 2870-2015 黄麻、红麻纤维线密度的快速检测 显微图像法
简介:
信息:ICS:65.020 CCS:B32 发布:2015-12-29 实施:2016-04-01
BS ISO 6200-2000 缩微摄影.源文件的第1代银明胶型缩微制品.密度规范和检测方法
简介:This International Standard specifies a method for measuring densities of first generation silver-gelatin microforms. It specifies density values for different qualities of documents. It applies to source document negative-appearing microforms. It does not apply to microforms for technical drawings which are dealt with in ISO 3272-2, or to diazo and vesicular films which are the subject of ISO 8126, or to COM microforms which are dealt with in ISO 8514.
信息:ICS:37.080 CCS:A14 发布:2000-03-15 实施:2000-03-15
ABNT MB-1237-1979 用比重瓶检测法检测工业芳香烃和相关原料的密度
简介:1.1 Erta Norma tem por objetivo estabelecer o procedimento para a determina?ío da densidade relativa por melo de um picn?metro à temperatura de 25 ± 0,1 °C.
信息:ICS: CCS: 发布:1979-1-1 实施:
EN ISO 17892-3-2015 岩土工程调查和测试.土壤的实验室检测.第3部分:粒子密度的测定(ISO 17892 . 3:2015,修正版本2015.12.15)
简介:Dieser Teil von ISO 17892 legt Verfahren zur Bestimmung der Korndichte von Böden fest. Dieser Teil von ISO 17892 ist im Rahmen geotechnischer Untersuchungen auf die labortechnische Bestimmung der Korndichte von Boden anwendbar und beschreibt zwei Verfahren: ein Pyknometer-Verfahren mittels Flüssigkeitsverdrängung und ein Pyknometer-Verfahren mittels Gasverdrängung. Das in diesem Teil von ISO 17892 beschriebene Kapillarpyknometer-Verfahren ist bei Bodenarten anwendbar, deren Korndurchmesser kleiner ist als 4 mm, oder deren Körner auf 4 mm zerkleinert wurden, um den Anforderungen zu entsprechen. Bei gröberen Materialien werden größere Pyknometer eingesetzt. Die für die Prüfung im Gaspyknometer geeignete Korngröße von Böden wird durch die Maße des Probenbehälters des verwendeten Gaspyknometers begrenzt. ANMERKUNG 1 Dieser Teil von ISO 17892 erfüllt die Anforderungen an die Bestimmung der Korndichte von Böden bei der geotechnischen Erkundung und Untersuchung nach EN 1997-1 und EN 1997-2. ANMERKUNG 2 Das Vorhandensein von gelösten Salzen im Porenwasser kann die Ergebnisse dieser Versuche beeinflussen. Es existieren Verfahren zur Kompensation von gelösten Salzen, die aber über den Anwendungsbereich dieser Norm hinausgehen.
信息:ICS:13.080.20;93.020 CCS:P13 发布:2015-12 实施:
ISO 6200-1999 缩微摄影技术 源文件第一代银明胶型缩微品 密度规范和检测方法
简介:This International Standard specifies a method for measuring densities of first generation silver-gelatin microforms. It specifies density values for different qualities of documents.It applies to source document negative-appearing microforms.It does not apply to microforms for technical drawings which are dealt with in ISO 3272-2, or to diazo and vesicular films which are the subject of ISO 8126, or to COM microforms which are dealt with in ISO 8514.
信息:ICS:37.080 CCS:A14 发布:1999-10 实施:
JUS B.F8.003-1979 石棉.通过MET分类、具体表面、体积、密度和含尘量的测定来检测质量
简介:
信息:ICS: CCS: 发布:1979-01-01 实施:
EN ISO 17892-3-2015 岩土工程调查和测试.土壤的实验室检测.第3部分:粒子密度的测定(ISO 17892 . 3:2015,修正版本2015.12.15)
简介:Dieser Teil von ISO 17892 legt Verfahren zur Bestimmung der Korndichte von Böden fest. Dieser Teil von ISO 17892 ist im Rahmen geotechnischer Untersuchungen auf die labortechnische Bestimmung der Korndichte von Boden anwendbar und beschreibt zwei Verfahren: ein Pyknometer-Verfahren mittels Flüssigkeitsverdrängung und ein Pyknometer-Verfahren mittels Gasverdrängung. Das in diesem Teil von ISO 17892 beschriebene Kapillarpyknometer-Verfahren ist bei Bodenarten anwendbar, deren Korndurchmesser kleiner ist als 4 mm, oder deren Körner auf 4 mm zerkleinert wurden, um den Anforderungen zu entsprechen. Bei gröberen Materialien werden größere Pyknometer eingesetzt. Die für die Prüfung im Gaspyknometer geeignete Korngröße von Böden wird durch die Maße des Probenbehälters des verwendeten Gaspyknometers begrenzt. ANMERKUNG 1 Dieser Teil von ISO 17892 erfüllt die Anforderungen an die Bestimmung der Korndichte von Böden bei der geotechnischen Erkundung und Untersuchung nach EN 1997-1 und EN 1997-2. ANMERKUNG 2 Das Vorhandensein von gelösten Salzen im Porenwasser kann die Ergebnisse dieser Versuche beeinflussen. Es existieren Verfahren zur Kompensation von gelösten Salzen, die aber über den Anwendungsbereich dieser Norm hinausgehen.
信息:ICS:13.080.20;93.020 CCS:P13 发布:2015-12 实施:
JIS K0519-1995 用宾厄姆比重瓶法对高纯度烃密度的检测方法
简介:この規格は,高純度炭化水緊の密度を小数点以下5位まで測定する方法について規定する()。 注()この規格において高純度炭化水素とは,n-へプタン,イソオクタンなどのように弱粘性も常温で液状のものをいい,また,密度とは,20℃における試料の単位体積(cm)の質量(g)をいう。
信息:ICS:71.040.40 CCS:G15 发布:1995-07-01 实施:
JUS D.A1.044-1979 木材检测.密度测定
简介:
信息:ICS: CCS: 发布:1979-01-01 实施:
WS/T 463-2015 血清低密度脂蛋白胆固醇检测
简介:本标准规定了血清低密度脂蛋白胆固醇测定及其质量保证的基本原则。本标准适用于实验室的血清低密度脂蛋白胆固醇测定,也供有关体外诊断厂商参照使用。
信息:ICS:11.100 CCS:C50 发布:2015-06-23 实施:2015-12-31
JUS B.B7.113-1993 石料力学特性.石料的物理和力学检测.表观密度测定
简介:
信息:ICS: CCS: 发布:1993 实施:1993
MSZ 14353-1979 用活性方式对射线防护中子密度进行检测
简介:
信息:ICS: CCS: 发布:1979-01-01 实施:
DB44/T 1356-2014 填砂相对密度检测方法
简介:本标准规定了轻型动力触探检测填砂相对密度检测方法的定义和符号、要求、检测与评定方法。 本标准适用于公路与港口工程的中砂、粗砂(细度模数在2.3~3.7)相对密度的检测。
信息:ICS:93.080.01 CCS:P51 发布:2014-04-18 实施:2014-07-18
NF X31-502-1992 土质.物理检测方法.松密度的测定.橡胶气球密度仪
简介:
信息:ICS:13.080.20 CCS:P13 发布:1992-07-01 实施:1992-07-05
MSZ 10783/14-1979 纺织地板家具原材料检测模式.体积密度下降了大众对一个地区的单位和支付能力
简介:
信息:ICS: CCS: 发布:1979 实施:
KS M 1937-2012 芳香族烃.苯、二甲苯和甲苯.密度检测(在21℃)
简介:이 표준은 벤젠, 자일렌 및 톨루엔의 20 ℃에서 밀도 측정에 대하여 피크노미터 및 하이드
信息:ICS:71.080.15 CCS:G04 发布:2012-12-14 实施:2012-12-14
NF X31-501-1992 土质.物理检测方法.原状土壤样品的松密度的测量.圆柱方法
简介:
信息:ICS:13.080.20 CCS:P13 发布:1992-07-01 实施:1992-07-05
COVENIN 703-1974 委内瑞拉植物脂肪和植物油标准中相关密度的检测(温度为20°C)
简介:Esta norma contempla el método de determinación de la densidad relativa a t/20℃, a las grasas y aceites que son líquidos y no depositan estearina a la temperatura a la cual se realiza la determinación.
信息:ICS: CCS: 发布:1973-10-9 实施:
KS M 1937-2012 芳香族烃.苯、二甲苯和甲苯.密度检测(在21℃)
简介:이 표준은 벤젠, 자일렌 및 톨루엔의 20 ℃에서 밀도 측정에 대하여 피크노미터 및 하이드
信息:ICS:71.080.15 CCS:G04 发布:2012-12-14 实施:2012-12-14
JUS H.P5.011-1991 农药检测.粉剂,颗粒,微颗粒以及水分散粉剂.散装密度的测定
简介:
信息:ICS: CCS: 发布:1991 实施:1991
MSZ 1425-1971 塑料密度检测
简介:
信息:ICS: CCS: 发布:1971-01-01 实施:
BS EN 60811-606-2012 电缆和纤维光缆.非金属材料检测方法.物理检验.密度测定方法
简介:
信息:ICS:29.035.01 CCS:K15 发布:2012-07-31 实施:2012-07-31
JUS H.P5.001-1991 农药的检测.浓缩悬浮物的密度测定
简介:
信息:ICS: CCS: 发布:1991 实施:1991
MSZ 18000/6-1971 棕煤的实验室检测.密度检测
简介:
信息:ICS: CCS: 发布:1971 实施:
YS/T 63.9-2012 铝用炭素材料检测方法.第9部分:真密度的测定.氦比重计法
简介:YS/T 63的本部分规定了氦比重计法测定铝用炭素材料的真密度。本部分适用于阴极炭块、预焙阳极、煅后石油焦真密度测定,其他固体材料也可参照此方法。本部分不适用于石墨材料。
信息:ICS:71.100.10 CCS:Q52 发布:2012-05-24 实施:2012-11-01
JUS H.N8.203-1988 纸板检测.单纸板厚度测定和纸板的表观密度测定
简介:
信息:ICS: CCS: 发布:1988-01-01 实施:
ABNT MB-68-1970 Mb - 68.实密度检测
简介:1.1 Este Método fixa o modo pelo qual se determina a densidade real de materiais refratários.
信息:ICS: CCS: 发布:1970-1-1 实施:
NY/T 1121.23-2010 土壤检测 第23部分:土粒密度的测定
简介:NY/T 1121的本部分规定了土粒密度的测定方法。本部分适用于各类土壤中土粒密度的测定。
信息:ICS:65.020 CCS:B11 发布:2010-07-08 实施:2010-09-01
MSZ 13336/7-1987 硬纸板检测.密度测定
简介:
信息:ICS: CCS: 发布:1987 实施:
MSZ 15433-1970 金属粉末的监测方法.密度检测
简介:
信息:ICS: CCS: 发布:1970-01-01 实施:
我们的实力
部分实验仪器




合作客户
注意:因业务调整,暂不接受个人委托测试望见谅。