通道设计检测标准通道设计-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

通道设计相关标准参考信息

GB/T 31255-2014 机械安全工业楼梯、工作平台和通道的安全设计规范
简介：本标准规定了工业楼梯、工作平台和通道的安全设计规范。本标准适用于用作进入机械的固定设施的工业楼梯、工作平台和通道。本标准也适用于没有固定在机器上,但在对机器进行某些操作时可能需要移除或移动到旁边(例如:更换大型压力机的工具)的工业楼梯、工作平台和通道。其他工业楼梯、工作平台和通道也可参照使用。
信息：ICS：13.110 CCS：J09 发布：2014-12-05 实施：2015-07-01

BS EN 16116-1-2013 轨道交通.台阶, 扶手和员工相关出入通道的设计要求. 客运车辆, 行李车和机车
简介：
信息：ICS：45.060.20 CCS：S14 发布：2013-09-30 实施：2013-09-30

NZS 4121-2001 建筑物及相关设施的进入通道及人员活动相关设计
简介：This Standard sets out requirements for the design of buildings, facilities within buildings, driveways, car parks, passages and any associated landscaping and accessways for use by people with disabilities as required by the Building Act 1991 and the Local Government Act 1974.It is written to cater for the majority of access and usage needs of people with disabilities, however, everyone benefits from accessible buildings in a variety of ways.
信息：ICS： CCS：发布：2001 实施：

T/SDL 4-2022 电力电缆通道设计规范
简介：电缆通道规划、电缆通道的选型原则、电缆通道的设计原则
信息：ICS：29.240.20 CCS：D4420 发布：2022-12-01 实施：2022-12-07

BS EN 16116-2-2013 轨道交通.台阶, 扶手和员工相关出入通道的设计要求. 货车
简介：
信息：ICS：45.060.20 CCS：S14 发布：2013-09-30 实施：2013-09-30

SNI 03-1735-2000 建筑物消防用建筑物通道和外界通道设计方法
简介：
信息：ICS：13.220.20 CCS：发布：2000 实施：

DB14/T 2318-2021 公路隧道辅助通道设计细则
简介：本文件规定了公路隧道辅助通道设计的总则、基本规定、调查与勘察、一般规定、位置确定、断面、衬砌结构、防排水、交叉口、路基、路面及其它设施。本文件适用于山西省境内新建和改（扩）建公路隧道辅助通道设计
信息：ICS：93.080 CCS：P 66 发布：2021-09-01 实施：2021-12-01

DB11/T 805-2011 人行天桥与人行地下通道无障碍设施设计规程
简介：
信息：ICS： CCS：发布：2011/09/01 实施：2011/09/01

ETSI ETS 300 795-1998 数字本地交换(LE)的V接口.支持V5的接入网(AN).呼叫处理和承载通道连接管理的传输特性和性能设计目标
简介：
信息：ICS： CCS：M11 发布：1998-05-01 实施：

T/GDMES 0023-2021 增材制造用于塑料注射模具的随形冷却通道设计、制造和检验规范
简介：本文件规定了随形冷却通道模具设计的前期准备、零件设计及加工、随形冷却通道设计确认、增材制造、零件检验、随形冷却通道维护及保养等要求。
信息：ICS：25.020 CCS：C356 发布：2021-03-17 实施：2021-03-18

DIN EN 1808-2010 悬吊式出入通道设备的安全性要求.设计计算,稳定性标准,结构.试验.德文版本EN 1808-1999+A1-2010
简介：
信息：ICS：53.020.99 CCS：Q78 发布：2010-11 实施：2010-11-01

DS/HD 1004-1994 预制件制作的活动通道和工作塔．材料，尺寸，设计载荷和安全要求
简介：This Harmonization Document applies to the design and manufacture of mobile access and working towers made of prefabricated elements wltn a height from 2.5 m to 12.0 m (indoors) and from 2.5 m to 8.0 m (outdoors).NOTE:In this Harmonizatlon Oocument 'indoors' meansthat the towers wi11 not be exposed to wind.This Harmonization Document- gives guidelines for the choice of the main dimensions and stadllizing metnods,- gives safety requirements and- gives some information on complete towers and tfeir manual relocation.NOTE:Thi s Harmon1zat1on Document:- does not apply to towers already In use prtor to the date of implementing tnis Harmoniza-tion Document,- does not specify propertles for the materials used.
信息：ICS： CCS：发布：1994-05-31 实施：1994-05-31

DIN EN 1004-1-2021 预制组件制的移动通道和工作塔. 材料、尺寸、设计载荷、安全和性能要求; 德文版本EN 1004-1-2020
简介：This document applies to the design of mobile access and working towers made of prefabricated elements with dimensions which are fixed by the design and with a height up to 12 m (indoors) and up to 8 m (outdoors). This document applies to mobile access and working towers used as
信息：ICS： CCS：P97 发布：2021-02-00 实施：

BS 8300-2009+A1-2010 满足残疾人需求的建筑物及其通道的设计.实施规程
简介：This British Standard gives recommendations for the design of newbuildings and their approaches to meet the needs of disabled people.It applies to car parking provision, setting?down points and garaging,access routes to and around all buildings, and entrances to andinteriors of new buildings. The recommendations also apply to routesto facilities associated with and in the immediate vicinity of buildings.NOTE 1 The recommendations in this British Standard mainly coveraccess to buildings. The standard makes reference to egress in the eventof fire or other emergency, but the main recommendations for means ofescape are given in BS 9999.The recommendations given in this British Standard also apply forassessing the accessibility and usability of existing buildings and,where practicable, as a basis for their improvement. The extent towhich the recommendations apply to listed and historic buildings isdetermined on a case?by?case basis.This British Standard applies to the following types of building:a) transport and industrial buildings, e.g. rail, road, sea and airtravel buildings and associated concourses, car parking buildingsand factories;b) administrative and commercial buildings, e.g. courts, offices,banks, post offices, shops, department stores and shoppingcentres, and public service buildings, including police stations;c) health and welfare buildings, e.g. hospitals, health centres, dentalpractices, surgeries and residential homes;d) refreshment, entertainment and recreation buildings, e.g. cafés,restaurants, public houses, concert halls, theatres, cinemas,conference buildings, community buildings, swimming pools andsports buildings;e) religious buildings and associated facilities, e.g. church halls;f) educational, cultural and scientific buildings, e.g. schools,universities, colleges, zoos, museums, art galleries, libraries andexhibition buildings;g) residential buildings, e.g. hostels and hotels, residential clubs,university and college halls of residence, nursing homes andprisons, as well as the common parts of multi?occupancyresidential buildings.This British Standard does not apply to individual dwellings, toresidential buildings designed specifically to meet the needs ofseverely disabled people, or to temporary structures.NOTE 2 This British Standard does not give recommendations formanagement and maintenance in occupied buildings, but a list of issuesto be considered is given in Annex A.Although this British Standard is aimed specifically at the design ofbuildings to meet the needs of disabled people, its recommendationsare also likely to benefit the population in general, e.g. elderly people,people with children in pushchairs and those carrying heavy luggage.
信息：ICS：11.080.99;91.040.01;91.140.01 CCS：P33 发布：2009-02-28 实施：2009-02-28

HD 1004-1992 预制组件制的移动通道和工作塔.材料,尺寸,设计载荷和安全要求由EN 1004-2004替代
简介：
信息：ICS： CCS：发布：1992-01-01 实施：

T/CIE 098-2021 液/气双通道热管冷板间接液冷数据中心设计规范
简介：本文件规定了液/气双通道热管冷板间接液冷数据中心的分级、基础设施、机架布局、散热系统、给水排水、供配电系统、线缆系统、智能化系统等方面的关键技术要求。本文件适用于单机架功率密度小于30kW的新建、扩建和改建，或有模块化和快速部署需求的液/气双通道热管冷板间接液冷数据中心的规划与设计。
信息：ICS：35.020 CCS：I653 发布：2021-01-15 实施：2021-04-29

BS 8300-2009 满足残疾人需求的建筑物及其通道的设计.实施规程
简介：This British Standard gives recommendations for the design of newbuildings and their approaches to meet the needs of disabled people.It applies to car parking provision, setting?down points and garaging,access routes to and around all buildings, and entrances to andinteriors of new buildings. The recommendations also apply to routesto facilities associated with and in the immediate vicinity of buildings.
信息：ICS：11.080.99;91.040.01 CCS：P33 发布：2009-02-28 实施：2009-02-28

CSN 27 8043-1986 动土机械．机器部件通道及开口．安全设计要求
简介：Schválení ST SEV 4892-84, která je zapracována v ?SN 27 8043 doporu?ilo federální ministerstvo v?eobecného strojírenství.Zpracovatel a oborové normaliza?ní st?edisko: Závody tě?kého strojírenství, V?zkumn? ústav stavebních a zemních stroj?, Brno — Ing. Vojtěch Gába, Květoslav MantlPracovník ??adu pro normalizaci a mě?ení: Ing. D. ?í?ková
信息：ICS： CCS：发布：1986-05-21 实施：

BS EN 1004-1-2020 预制组件制的移动通道和工作塔. 材料、尺寸、设计载荷、安全和性能要求
简介：
信息：ICS： CCS：P95 发布：2020-11-25 实施：2020-11-25

TCVN 7302-1-2007 机械安全用人体工效学设计.第1部分:机器工作场地人体通道尺寸测定原则
简介：
信息：ICS： CCS：发布：2007 实施：

NF J41-310-1985 造船工业.机舱和通道用底舱集水阱.一般设计特性
简介：
信息：ICS：47.020.10 CCS：U55 发布：1985-12-01 实施：1985-12-20

NF P93-510-1-2020 预制部件制的移动通道和工作塔. 第1部分: 材料、尺寸、设计载荷、安全和性能要求
简介：Le présent document s'applique à la conception des échafaudages roulants constitués d'éléments préfabriqués dont les dimensions sont fixées par la conception et, d'une hauteur allant jusqu'à 12,0 m (à l'intérieur) et jusqu'à 8,0 m (à l'extérieur) . Le présent document s'applique
信息：ICS： CCS：P96 发布：2020-11-18 实施：2021-01-09

SAE ARP 5056-2006 飞机.第25部分:飞机通道中飞行机组人员相遇问题设计程序
简介：This ARP defines recommended flight crew interface design processes and methods for new flight deck designs as well as modifications to the flight crew interface of existing flight decks of transport category aircraft (Part 25), which includes commercial transport aircraft, regional and business aircraft. These processes and methods are intended to be utilized by the design engineers of manufacturers of transport category aircraft or any modifiers to the flight deck system. Modifiers include equipment suppliers, avionics manufacturers, aircraft operators, original equipment manufacturers (OEM), regulatory authorities, or anyone seeking a supplemental type certificate (STC), type certificate (TC), amended TC, field approval, or equivalent approval. The processes and methods described in this ARP address the integration of human factors/ergonomics, engineering, and flight operations in the design and/or modification of flight crew interfaces. These interfaces provide the flight crew access to the installed systems, using controls, indications and displays, in order to allow them to accomplish the tasks of aviate, navigate, communicate, and manage systems. Included in these processes and methods are considerations for flight crew training, the use and integration of automation, error tolerant designs, and task management. These processes and methods are designed to yield flight deck designs that are both safe and efficient, in that order of priority. These processes and methods address the issue of creating modifications to existing designs that are compatible with the original intent of the flight deck design.
信息：ICS：49.095 CCS：V35 发布：2006-09-01 实施：

BS 5395-3-1985 楼梯、梯子和通道.工业型楼梯、固定梯子和通道的设计实施规程
简介：Covers factors affecting choice of means of access or escape, structural materials, dimensions, safety equipment, platform and walkway floor loads. Refers to BS 5395 Parts 1 and 2 for general design of stairs and to BS 6180 for general design of protective barriers.
信息：ICS：91.060.30 CCS：Q70 发布：1985-11-29 实施：1985-11-29

KS B ISO TS 15768-2020 开放通道中液体速度的测量 - 电磁电流表的设计选择和使用
简介：
信息：ICS：17.120.20 CCS：发布：2020-09-16 实施：

DIN EN 1433-2005 车辆和行人区排水通道.分类、设计、试验要求、标记和合格评定
简介：According to this amendment, a deviation from the requirement for the length of slots smaller equal than 170 is permitted for slot units and kerb units designed for places of installation where traffic by bicycles is prohibited in direction of trafic (e. g. motorways, runnways at airports).
信息：ICS：93.080.30 CCS：P33 发布：2005-09 实施：

NC 53-135-1984 建筑设计详细．主要通道设计规格和计算方法
简介：Esta norma establece las especificaciones de proyecto y métodos de cálculo de los canales magistrales.Esta norma se aplicará tanto en la proyección de nuevos cana-les oomo en la reproyecoión de oanales existentes.
信息：ICS： CCS：发布：1984-12-1 实施：

ASTM F3275-19 使用测力仪评估设计用于清洁医疗设备内部通道的刷子部件性能的标准指南
简介：
信息：ICS：11.040.01 CCS：发布：2019-01-15 实施：

NF P93-510-2005 预制部件制的移动通道和工作塔.材料、尺寸、设计载荷、安全和性能要求
简介：
信息：ICS：91.220 CCS：P96 发布：2005-05-01 实施：2005-05-05

ISO 5621-1984 造船机舱通道泥箱一般设计特性
简介：Specifies the general design characteristics of mud boxes used between pumps and bilge suctions in machinery spaces and tunnels for the coarse filtration of bilge water. Applies to deep sea ships and inland navigation ships.
信息：ICS：47.020.10 CCS：U25 发布：1984-12 实施：

ASTM C1802-18b 用于公用设施水和污水结构的金属水平通道舱门的设计测试制造选择和安装的标准规范
简介：
信息：ICS：91.140.60 CCS：发布：2018-12-01 实施：

BS EN 1004-2005 预制组件制的移动通道和工作塔.材料、尺寸、设计载荷、安全和性能要求
简介：This document applies to the design of mobile access and working towers made of prefabricated elementswith a height from 2,5 m to 12,0 m (indoors) and from 2,5 m to 8,0 m (outdoors).This document:- gives guidelines for the choice of the main dimensions and stabilizing methods;- gives safety and performance requirements; and- gives some information on complete towers.NOTE In this document "indoors" means that the towers is not be exposed to wind, and "outdoors" means that thetowers may be exposed to wind.
信息：ICS：91.220 CCS：P95 发布：2005-03-31 实施：2005-03-31

AASHTO DIVISION I 2.4 地下通道的公路净空(公路桥梁标准规范,第1分册.设计)
简介：
信息：ICS： CCS：发布：实施：

T/CIE 051-2018 液/气双通道散热数据中心机房设计规范
简介：本标准规定了液/气双通道散热数据中心机房级别的基础设施、机架布局、散热系统、供配电系统、线缆系统、智能化系统等方面的关键技术要求。本标准适用于单机架功率密度小于30kW的新建、扩建和改建液/气双通道散热数据中心机房工程的规划与设计。
信息：ICS：35.020 CCS：I659 发布：2018-11-15 实施：2019-02-19

DIN EN 1004-2005 预制组件制的移动通道和工作塔.材料、尺寸、设计载荷、安全和性能要求
简介：This document applies to the design and manufacture of mobile access and working towers made of prefabricated elements with a height from 2,5 m to 12,0 m (indoors) and from 2,5 m to 8,0 m outdoors. It gives guidelines for the choice of the main dimensions and stabilizing methods, specifies properties for the materials used, gives safety requirements and gives some information on complete towers and their manual relocation.
信息：ICS：91.220 CCS：P97 发布：2005-03 实施：

简介： 信息：

ASTM C1802-18a 用于公用设施水和污水结构的金属水平通道舱门的设计测试制造选择和安装的标准规范
简介：
信息：ICS：91.140.60 CCS：发布：2018-05-15 实施：

KS V ISO 5621-2004 造船.机舱通道泥箱.一般设计特性
简介：이 규격은 빌지를 거칠게 여과하기 위하여 기관 구역과 터널에 있는 펌프와 빌지 흡입구
信息：ICS：47.020.30 CCS：U25 发布：2004-12-22 实施：2004-12-22

简介： 信息：

DB34/T 2833-2017 装配式钢筋混凝土通道设计规程
简介：本标准规定了装配式钢筋混凝土通道的术语和定义、符号、材料、总体设计、主体设计、洞口设计、拼接设计、附属设施及附属工程设计、作用、结构计算等要求。本标准适用于以《公路桥涵设计通用规范》按小桥、涵洞分类的装配式钢筋混凝土通道的设计。
信息：ICS：ICS 93.040 CCS：P28 发布：2017-03-30 实施：2017-04-30

简介： 信息：

DIN EN 1808-2015 悬吊式出入通道设备的安全性要求.设计计算,稳定性标准,结构.检验和试验.德文版本EN 1808-2015
简介：
信息：ICS：53.020.99 CCS：Q78 发布：2015-08 实施：

EN 1004-2004 预制组件制的移动通道和工作塔.材料,尺寸,设计载荷,安全和性能要求;代替HD 1004-1992
简介：
信息：ICS：91.220 CCS：发布：2004 实施：

简介： 信息：

IEC/TR 62343-6-7-2015 动态模块. 第6-7部分: 设计指南. 光通道监测仪
简介：
信息：ICS：33.180.20;33.180.30;33.180.99 CCS：发布：2015-02 实施：

NF P16-340-2003 车辆和行人区的排水通道.分类、设计、试验要求、标记和合格评定
简介：
信息：ICS：93.080.30 CCS：P41 发布：2003-11-01 实施：2003-11-05

简介： 信息：

DIN EN 16116-1-2014 轨道交通.台阶、扶手和相关员工通道的设计要求.第1部分:乘用车、行李货车和机车.德文版本EN 16116-1-2013
简介：
信息：ICS：45.060.20 CCS：S10 发布：2014-01 实施：

TR 6-2001 管道维修通道．新加坡管道维修通道的设计、施工和操作
简介：This Technical Reference sets down the engineering and management system requirements in the design, construction and operation of pipeline service corridors in Singapore.NOTE - The titles of the publications referred to in this technical reference are listed at the end of the document.
信息：ICS： CCS：发布：2001-1-1 实施：

简介： 信息：

DIN EN 16116-2-2014 轨道交通.台阶、扶手和相关员工通道的设计要求.第2部分:货车.德文版本EN 16116-2-2013
简介：
信息：ICS：45.060.20 CCS：S10 发布：2014-01 实施：

BS 8300-2001 满足残疾人需求的建筑物及其通道的设计.实施规则
简介：This British Standard gives recommendations for the design of new buildings and their approaches to meet the needs of disabled people. It applies to car parking provision, setting down points and garaging, access routes to and around all buildings, and entrances to and interiors of new buildings. Routes to recreational facilities associated with and in the immediate vicinity of buildings, such as patios, and seating and picnic areas, are also covered.The recommendations given in this British Standard also apply for assessing the accessibility and usability of existing buildings and, where practicable, as a basis for their improvement. The extent to which the recommendations apply to listed and historic buildings is determined on a case by case basis.This British Standard applies to the following types of building:a) transport and industrial buildings, e.g. rail, road, sea and air travel buildings and associated concourses, car-parking buildings and factories;b) administrative and commercial buildings, e.g. courts, offices, banks, post offices, shops, department stores and shopping centres, and public service buildings, including police stations;c) health and welfare buildings, e.g. hospitals, health centres, surgeries and residential homes;d) refreshment, entertainment and recreation buildings, e.g. cafes, restaurants, public houses, concert halls, theatres, cinemas, conference buildings, community buildings, swimming pools and sports buildings;e) religious buildings;f) educational, cultural and scientific buildings, e.g. schools, universities, colleges, zoos, museums, art galleries, libraries and exhibition buildings;g) dwellings and other residential buildings, e.g. hostels, hotels, residential clubs, university and college halls of residence, nursing homes and prisons.This British Standard does not apply to dwellings or residential buildings designed exclusively for use by disabled people nor does it make specific recommendations relating to the use of buildings by children.
信息：ICS：11.180.99;91.040.01 CCS：P33 发布：2001-10-31 实施：2001-10-31

简介： 信息：

NF F01-114-1-2013 轨道交通.台阶、扶手和相关联的员工通道的设计要求.第1部分:乘用车、行李货车和机车
简介：
信息：ICS：45.060.20 CCS：S14 发布：2013-11-16 实施：2013-11-16

DIN 4426-2001 建筑物维修用安全设备.工作场所和通道的安全要求.设计和建造
简介：The document applies to planning and execution of permanently installed working and walking areas and other equipment on roofs, at facades, windows of buildings, which are used for maintenance and inspection.,,
信息：ICS：91.200 CCS：P96;P09 发布：2001-09 实施：

简介： 信息：

NF F01-114-2-2013 轨道交通.踏阶,扶手和相关联的员工通道设计要求.第2部分:货车
简介：
信息：ICS：45.060.20 CCS：S50 发布：2013-11-16 实施：2013-11-16

SANS 51808-1999 悬吊式出入通道设备的安全性要求．设计计算，稳定性标准，结构和试验
简介：Specifies safety requirements for suspended access equipment (SAE). Deals with significant hazards pertinent to SAE when used as intended, and specifies appropriate technical measures to eliminate or reduce risks. Excludes operation in severe conditions,
信息：ICS：53.020.99 CCS：J81 发布：2001-07-27 实施：

简介： 信息：