总碳试验标准检测标准总碳试验标准-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

总碳试验标准相关标准参考信息

ASTM C454-10(2022) 用碱分解碳耐火材料的标准试验方法
简介：
信息：ICS：71.100.99 CCS：发布：2022-11-01 实施：

ASTM C749-15(2020) 碳和石墨拉伸应力应变的标准试验方法
简介：
信息：ICS：71.060.10 CCS：发布：2020-05-01 实施：

ASTM D6316-17 煤和焦炭固体残渣中总可燃碳和碳酸盐碳测定的标准试验方法
简介：
信息：ICS：75.160.10 CCS：发布：2017-12-01 实施：

ASTM D3238-22a 用n--M法计算石油碳分布和结构基团分析的标准试验方法
简介：
信息：ICS：75.080 CCS：发布：2022-11-01 实施：

ASTM D4530-15(2020) 碳残留测定标准试验方法（微量法）
简介：
信息：ICS：75.080 CCS：发布：2020-05-01 实施：

ASTM C1853-17 用直接燃烧红外检测法测定混合氧化物（（U Pu）O2）烧结球团中碳（总）含量的标准试验方法
简介：
信息：ICS：27.120.30 CCS：发布：2017-06-01 实施：

ASTM D8473-22 用带尖峰碳-14的液体闪烁计数法测定液态烃燃料的生物基含量的标准试验方法
简介：
信息：ICS： CCS：发布：2022-09-15 实施：

ASTM D7972-14(2020) 在室温下使用三点负载制造碳和石墨制品的弯曲强度的标准试验方法
简介：
信息：ICS：71.100.99 CCS：发布：2020-05-01 实施：

ASTM C454-10(2017) 碱性碳耐火材料崩解的标准试验方法
简介：
信息：ICS：71.100.99 CCS：发布：2017-05-01 实施：

ASTM D7633-13(2022) 炭黑碳含量的标准试验方法
简介：
信息：ICS：71.060.10 CCS：发布：2022-06-01 实施：

ASTM C695-15(2020) 碳和石墨抗压强度的标准试验方法
简介：
信息：ICS：71.060.10 CCS：发布：2020-05-01 实施：

ASTM D7573-09(2017) 用高温催化燃烧和红外探测法测定水中总碳和有机碳的标准试验方法
简介：
信息：ICS：13.060.50 CCS：发布：2017-02-01 实施：

ASTM D6559-22 测定焙烧碳阳极和阴极块的热重（TGA）空气反应性的标准试验方法
简介：
信息：ICS：77.020 CCS：发布：2022-05-01 实施：

ASTM D4129-05(2020) 高温氧化法和库仑法检测水中总有机碳的标准试验方法
简介：
信息：ICS：13.060.50 CCS：发布：2020-01-01 实施：

ASTM C714-2017 采用热脉冲法测定碳和石墨热扩散性的标准试验方法
简介：5.1x00a0;Thermal diffusivity is an important property required for such purposes as design applications under transient heat flow conditions, determination of safe operating temperature, process control, and quality assurance. 5.2x00a0;The flash method is used to measure values of thermal diffusivity (x03b1;) of a wide range of solid materials. It is particularly advantageous because of the simple specimen geometry, small specimen size requirements, rapidity of measurement, and ease of handling materials having a wide range of thermal diffusivity values over a large temperature range with a single apparatus. The short measurement times involved reduce the chances of contamination and change of specimen properties due to exposure to high temperature environments. 5.3x00a0;Thermal diffusivity results in many cases can be combined with values for specific heat (Cp) and density (x03c1;) to derive thermal conductivity (x03bb;) from the relation x03bb; = x03b1;Cpx03c1;. For guidance on converting thermal diffusivity to thermal conductivity, refer to Practice C781. 5.4x00a0;This test method can be used to characterize graphite for design purposes. 5.5x00a0;Test Method E1461 is a more detailed form of this test method and has applicability to much wider ranges of materials, applications, and temperatures. 1.1x00a0;This test method covers the determination of the thermal diffusivity of carbons and graphite at temperatures up to 5008201;x00b0;C. It requires only a small easily fabricated specimen. Thermal diffusivity values in the range from 0.048201;cm2/s to 2.08201;cm2/s are readily measurable by this test method; however, for the reason outlined in Section 7, for materials outside this range this test method may require modification. 1.2x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.3x00a0;This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
信息：ICS：71.060.10 CCS：Q51 发布：2017 实施：

ASTM D6558-22 测定焙烧碳阳极和阴极块的热重分析CO反应性的标准试验方法
简介：
信息：ICS：77.020 CCS：发布：2022-05-01 实施：

ASTM D189-06(2019) 石油产品康拉逊碳残留标准试验方法
简介：
信息：ICS：75.080 CCS：发布：2019-12-01 实施：

ASTM D5341/D5341M-2017 测量焦炭活性指数(CRI)和反应后的焦碳强度(CSR)的标准试验方法
简介：4.1x00a0;When coke lumps descend in the blast furnace, they are subjected to reaction with countercurrent CO2 and to abrasion as they rub together and against the walls of the furnace. These concurrent processes physically weaken and chemically react with the coke lumps, producing an excess of fines that can decrease burden permeability and result in increased coke rates and lost hot metal production. This test method is designed to measure indirectly this behavior of coke in the blast furnace. 1.1x00a0;This test method, patterned after the Nippon Steel test procedure, describes the equipment and techniques used for determining lump coke reactivity in carbon dioxide (CO2) gas at elevated temperatures and its strength after reaction in CO2 gas by tumbling in a cylindrical chamber referred to as an I-tester. 1.2x00a0;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4x00a0;This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
信息：ICS：75.160.10 CCS：D21 发布：2017 实施：

ASTM D6866-22 用放射性碳分析法测定固体、液体和气体样品中生物基含量的标准试验方法
简介：
信息：ICS：71.040.50 CCS：发布：2022-03-15 实施：

ASTM D7148-19a 用电解液浴测量系统中的碳电极测定碱性电池分离器离子电阻率的标准试验方法
简介：
信息：ICS：29.220.30 CCS：发布：2019-11-01 实施：

ASTM D5341/D5341M-2017a 测量焦炭活性指数(CRI)和反应后的焦碳强度(CSR)的标准试验方法
简介：4.1x00a0;When coke lumps descend in the blast furnace, they are subjected to reaction with countercurrent CO2 and to abrasion as they rub together and against the walls of the furnace. These concurrent processes physically weaken and chemically react with the coke lumps, producing an excess of fines that can decrease burden permeability and result in increased coke rates and lost hot metal production. This test method is designed to measure indirectly this behavior of coke in the blast furnace. 1.1x00a0;This test method, patterned after the Nippon Steel test procedure, describes the equipment and techniques used for determining lump coke reactivity in carbon dioxide (CO2) gas at elevated temperatures and its strength after reaction in CO2 gas by tumbling in a cylindrical chamber referred to as an I-tester. 1.2x00a0;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4x00a0;This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
信息：ICS：75.160.10 CCS：D21 发布：2017 实施：

ASTM D5291-21 石油产品和润滑剂中碳、氢和氮的仪器测定的标准试验方法
简介：
信息：ICS：75.080 CCS：发布：2021-11-01 实施：

ASTM D7871-19 气相色谱法分析环己烷的标准试验方法（有效碳数）
简介：
信息：ICS：71.080.10 CCS：发布：2019-11-01 实施：

ASTM D6316-2017 测定煤和焦炭的固体残留物中总的, 可燃烧的和碳化碳的标准试验方法
简介：5.1x00a0;The combustible carbon content of solid residues is used to calculate efficiency of fuel combustion in boiler furnaces and similar combustors. 5.2x00a0;Combustible carbon values are also used to determine the residual fuel value of incompletely combusted/reacted coal and coke in other reactors that consume carbonaceous fuels (examples include fluidized bed furnaces and liquefaction, gasification and pyrolysis reactors). 5.3x00a0;The combustible carbon content of flyash is an important parameter in the use of flyash as a cement additive. 1.1x00a0;This test method covers the determination of total, combustible, and carbonate carbon remaining in the solid byproducts of combustion from boiler furnaces and similar reactors, including ash, flyash, char, slag, and similar materials. 1.2x00a0;This test method is intended for the use of industry to determine the performance of boiler furnaces and similar combustion reactors and aid in determining the quality of the solid residue from combustion. 1.3x00a0;This test method comprises the use of any of several methods to determine total carbon content combined with any of several methods to determine carbonate carbon, and the calculation, by difference, of the combustible carbon remaining in a sample. 1.4x00a0;Alternatively, this test method applies to the determination of total carbon remaining in a material after acidification with strong acid to evolve carbonate carbon. In this case, the combustible carbon is the total carbon measured in the sample after acidification. 1.5x00a0;The values stated in SI units are to be regarded as standard. Non-SI units, if provided, are for information only and are contained within parentheses. 1.6x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and to determine the applicability of regulatory limitations prior to use. 1.7x00a0;This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
信息：ICS：75.160.10 CCS：D20 发布：2017 实施：

ASTM C1179-21 人造碳和石墨材料在空气中氧化质量损失的标准试验方法
简介：
信息：ICS：71.060.10 CCS：发布：2021-11-01 实施：

ASTM D2685-11(2019) 用气相色谱法测定六氟化硫中空气和四氟化碳的标准试验方法
简介：
信息：ICS：71.060.50 CCS：发布：2019-10-01 实施：

ASTM E1941-10(2016) 通过燃烧分析测定耐火和反应性金属及其合金中的碳的标准试验方法
简介：
信息：ICS：71.040.50 CCS：发布：2016-12-01 实施：

ASTM D7542-21 在动力学状态下碳和石墨空气氧化的标准试验方法
简介：
信息：ICS：71.060.10 CCS：发布：2021-11-01 实施：

ASTM C1099-07(2019) 含碳耐火材料在高温下破裂模量的标准试验方法
简介：
信息：ICS：81.080 CCS：发布：2019-04-01 实施：

ASTM D5373-16 测定煤分析样品中碳氢氮和煤和焦炭分析样品中碳的标准试验方法
简介：
信息：ICS：75.160.10 CCS：发布：2016-09-01 实施：

ASTM D5502-21 铝工业用制造阳极和阴极碳物理测量表观密度的标准试验方法
简介：
信息：ICS：71.100.10 CCS：发布：2021-10-01 实施：

ASTM D7148-19 用电解液浴测量系统中的碳电极测定碱性电池分离器离子电阻率的标准试验方法
简介：
信息：ICS：29.220.30 CCS：发布：2019-03-01 实施：

ASTM C808-75(2016) 报告制造碳和石墨轴承和密封材料摩擦磨损试验结果的标准指南
简介：
信息：ICS：17.040.20 CCS：发布：2016-01-01 实施：

ASTM C886-21 碳和石墨材料的硬化硬度试验的标准试验方法
简介：
信息：ICS：71.100.99 CCS：发布：2021-10-01 实施：

ASTM D7573-18ae1 用高温催化燃烧和红外探测法测定水中总碳和有机碳的标准试验方法
简介：
信息：ICS：13.060.50 CCS：发布：2018-12-15 实施：

ASTM C1408-2016 用直接燃烧红外探测法测定氧化铀粉末和颗粒中总碳量的标准试验方法
简介：5.1x00a0;Uranium dioxide is used as a nuclear-reactor fuel. Gadolinium oxide is used as an additive to uranium dioxide. In order to be suitable for this purpose, these materials must meet certain criteria for impurity content. This test method is designed to determine whether the carbon content meets Specifications C753, C776, C888, and C922. 1.1x00a0;This test method covers the determination of carbon in nuclear-grade uranium oxide powders and pellets to determine compliance with specifications. 1.2x00a0;Gadolinium oxide (Gd2O3) and gadolinium oxide-uranium oxide powders and pellets may also be analyzed using this test method. 1.3x00a0;This test method covers the determination of 5 to 500 x03bc;g of residual carbon. 1.4x00a0;This test method describes an induction furnace carrier gas combustion system equipped with an infrared detector. It may also be applied to a similar instrument equipped with a thermal conductivity detector. 1.5x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5.1x00a0;The preferred system of units is micrograms carbon per gram of sample (x03bc;g/g sample) or micrograms carbon per gram of uranium (x03bc;g/g U). 1.6x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：27.120.30 CCS：发布：2016 实施：

ASTM C695-21 碳和石墨抗压强度的标准试验方法
简介：
信息：ICS：71.060.10 CCS：发布：2021-05-01 实施：

ASTM D7573-18a 用高温催化燃烧和红外探测法测定水中总碳和有机碳的标准试验方法
简介：
信息：ICS：13.060.50 CCS：发布：2018-12-15 实施：

ASTM C559-2016 通过制造碳和石墨制品的物理测量体积密度的标准试验方法
简介：4.1x00a0;Bulk density as determined by this test method is a basic material property of importance in manufacturing and application of carbon and graphite. 4.2x00a0;This test method can be used for quality and process control, material characterization and description, and other purposes. 1.1x00a0;This test method covers the determination of the bulk density of manufactured articles of carbon and graphite of at least 5008201;mm3 volume. The bulk density is calculated to an accuracy of 0.258201;%, using measurements of mass and dimensions in air at 258201;x00b0;C x00b1; 58201;x00b0;C. 1.2x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：71.100.99 CCS：发布：2016 实施：

ASTM D5373-21 测定煤分析样品中碳氢氮和煤和焦炭分析样品中碳的标准试验方法
简介：
信息：ICS：75.160.10 CCS：发布：2021-04-01 实施：

ASTM C1865-18 用直接燃烧红外分光光度计测定氧化钚粉末中碳和硫含量的标准试验方法
简介：
信息：ICS：27.120.30 CCS：发布：2018-10-01 实施：

ASTM D6866-2016 采用放射性碳分析测定固体, 液体和气体样品中生物基含量的标准试验方法
简介：4.1x00a0;This testing method provides accurate biobased/biogenic carbon content results to materials whose carbon source was directly in equilibrium with CO2 in the atmosphere at the time of cessation of respiration or metabolism, such as the harvesting of a crop or grass living its natural life in a field. Special considerations are needed to apply the testing method to materials originating from within artificial environments. Application of these testing methods to materials derived from CO2 uptake within artificial environments is beyond the present scope of this standard. 4.2x00a0;Method B utilizes AMS along with Isotope Ratio Mass Spectrometry (IRMS) techniques to quantify the biobased content of a given product. Instrumental error can be within 0.1-0.5 % (1 relative standard deviation (RSD)), but controlled studies identify an inter-laboratory total uncertainty up to x00b1;38201;% (absolute). This error is exclusive of indeterminate sources of error in the origin of the biobased content (see Section 22 on precision and bias). 4.3x00a0;Method C uses LSC techniques to quantify the biobased content of a product using sample carbon that has been converted to benzene. This test method determines the biobased content of a sample with a maximum total error of x00b1;38201;% (absolute), as does Method B. 4.4x00a0;The test methods described here directly discriminate between product carbon resulting from contemporary carbon input and that derived from fossil-based input. A measurement of a productx2019;s8201;14C/12C or 14C/13C content is determined relative to a carbon based modern reference material accepted by the radiocarbon dating community such as NIST Standard Reference Material (SRM) 4990C, (referred to as OXII or HOxII). It is compositionally related directly to the original oxalic acid radiocarbon standard SRM 4990B (referred to as OXI or HOxI), and is denoted in terms of fM, that is, the samplex2019;s fraction of modern carbon. (See Terminology, Section 3.) 4.5x00a0;Reference standards, available to all laboratories practicing these test methods, must be used properly in order that traceability to the primary carbon isotope standards are established, and that stated uncertainties are valid. The primary standards are SRM 4990C (oxalic acid) for8201;14C and RM 8544 (NBS 19 calcite) for8201;13C. These materials are available for distribution in North America from the National Institute of Standards and Technology (NIST), and outside North America from the International Atomic Energy Agency (IAEA), Vienna, Austria. 4.6x00a0;Acceptable SI unit deviations (tolerance) for the practice of these test methods is x00b1;58201;% from the stated instructions unless otherwise noted. 1.1x00a0;This standard is a test method that teaches how to experimentally measure biobased carbon content of solids, liquids, and gaseous samples using radiocarbon analysis. These test methods do not address environmental impact, product performance and functionality, determination of geographical origin, or assignment of required amounts......
信息：ICS：71.040.50 CCS：发布：2016 实施：

ASTM C808-75(2021) 报告制造碳和石墨轴承和密封材料摩擦磨损试验结果的标准指南
简介：
信息：ICS：17.040.20 CCS：发布：2021-04-01 实施：

ASTM C1494-13(2018) 测定氮化硅粉末中碳、氮和氧质量分数的标准试验方法
简介：
信息：ICS：71.100.10 CCS：发布：2018-10-01 实施：

ASTM C838-2016 人造碳及石墨块体积密度的标准试验方法
简介：4.1x00a0;This test method provides a means of determining bulk density on as-manufactured logs, blocks, or shaped articles. 4.2x00a0;This test method is suitable for manufacturing control and acceptance specifications. 4.3x00a0;Test Method C559 may be used when a higher degree of accuracy is required. 1.1x00a0;This test method covers the determination of the density of as-manufactured carbon and graphite from measurements of mass and dimensions at room temperature. 1.2x00a0;This test method is applicable to boronated carbon and graphite. 1.3x00a0;This test method is not applicable to carbon- and graphite-containing materials that are thermally unstable at or below temperatures of 2008201;x00b0;C. 1.4x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：81.080 CCS：发布：2016 实施：

ASTM C565-15(2021) 碳和石墨机械材料拉伸试验的标准试验方法
简介：
信息：ICS：71.060.10 CCS：发布：2021-04-01 实施：

ASTM D5031/D5031M-13(2018) 油漆和相关涂料的封闭碳弧暴露试验的标准做法
简介：
信息：ICS：87.040 CCS：发布：2018-09-01 实施：

ASTM C565-15 碳和石墨机械材料拉伸试验的标准试验方法
简介：
信息：ICS：71.060.10 CCS：发布：2015-12-01 实施：

ASTM C695-2021 碳和石墨抗压强度的标准试验方法
简介：1.1?This test method covers the determination of the compressive strength of carbon and graphite at room temperature. 1.2?The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are prov
信息：ICS：71.060.10 CCS：G13 发布：2021 实施：

ASTM D7573-18 用高温催化燃烧和红外探测法测定水中总碳和有机碳的标准试验方法
简介：
信息：ICS：13.060.50 CCS：发布：2018-08-01 实施：

ASTM D6558-00A(2015)e1 测定焙烧碳阳极和阴极块的TGA CO2反应性的标准试验方法
简介：
信息：ICS：77.020 CCS：发布：2015-10-01 实施：

ASTM D8361-20 用红外检测产生的二氧化碳的两阶段湿化学催化羟基自由基氧化法测定水中总有机碳的标准试验方法
简介：
信息：ICS：13.060.50 CCS：发布：2020-12-01 实施：

ASTM D7871-18 气相色谱法分析环己烷的标准试验方法（有效碳数）
简介：
信息：ICS：71.080.10 CCS：发布：2018-01-01 实施：

ASTM C749-15 碳和石墨拉伸应力应变的标准试验方法
简介：
信息：ICS：71.060.10 CCS：发布：2015-10-01 实施：

ASTM D8356-20 用于获得近似弹性常数的人造碳和石墨材料中声速的标准试验方法:杨氏模量、剪切模量和泊松比
简介：
信息：ICS：59.100.20 CCS：发布：2020-10-01 实施：

ASTM D7504-2018 用气相色谱法测定单环芳烃中痕量杂质和有效碳数的标准试验方法
简介：5.1x00a0;Determining the type and amount of hydrocarbon impurities remaining from the manufacture of toluene, mixed xylenes, p-xylene, o-xylene, ethylbenzene, benzene, and styrene used as chemical intermediates and solvents is often required. This test method is suitable for setting specifications and for use as an internal quality control tool where these products are produced or are used. Typical impurities are: alkanes containing 1 to 10 carbons atoms, benzene, toluene, ethylbenzene (EB), xylenes, and aromatic hydrocarbons containing nine carbon atoms or more. 5.2x00a0;This method may not detect all components and there may be unknown components that would be assigned inappropriate correction factors and thus, the results may not be absolute. 1.1x00a0;This test method covers the determination of total nonaromatic hydrocarbons and monocyclic aromatic hydrocarbons in benzene, toluene, ethylbenzene, p-xylene, o-xylene, styrene and mixed xylenes by gas chromatography. The purity of benzene, toluene, ethylbenzene, p-xylene, o-xylene, styrene and mixed xylenes is also calculated. Similar test methods, using the internal standard calibration technique and the external standard calibration technique, are Test Methods D2360, D3797, D4492, D5060, D5135, D5917, and D6563 respectively. 1.2x00a0;The limit of detection (LOD) is 0.0002 wt % and limit of quantitation (LOQ) is 0.0006 wt % for impurities in toluene, mixed xylenes, p-xylene, o-xylene, ethylbenzene, benzene, and styrene. 1.3x00a0;In determining the conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29. 1.4x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6x00a0;This international standard was developed in accordance with internationally recognized princip......
信息：ICS：71.080.15 CCS：发布：2018 实施：

ASTM C651-15 在室温下用四点加载法测定人造碳和石墨制品弯曲强度的标准试验方法
简介：
信息：ICS：71.100.99 CCS：发布：2015-10-01 实施：

ASTM C651-20 在室温下用四点加载法测定人造碳和石墨制品弯曲强度的标准试验方法
简介：
信息：ICS：71.100.99 CCS：发布：2020-05-01 实施：

ASTM D4839-03(2017) 用紫外线和/或过硫酸盐氧化法和红外线检测水中总碳和有机碳的标准试验方法
简介：
信息：ICS：71.060.10 CCS：发布：2017-12-15 实施：

ASTM C695-15 碳和石墨抗压强度的标准试验方法
简介：
信息：ICS：71.060.10 CCS：发布：2015-06-01 实施：