铝铸件标准检测标准铝铸件标准-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

铝铸件标准相关标准参考信息

ASTM E2422-22 铝铸件检验用标准数字参考图像
简介：
信息：ICS：77.150.10 CCS：发布：2022-12-01 实施：

ASTM B240-13 标准号码适用于铸造和压铸件的锌锭和锌铝（ZA）合金锭
简介：
信息：ICS：77.150.60 CCS：发布：2013-02-01 实施：

ASTM E155-05 铝和镁铸件检验标准参考射线照相
简介：
信息：ICS：77.040.20 CCS：发布：2005-11-15 实施：

ASTM E2973-22 铝和镁压铸件检验用标准数字参考图像
简介：
信息：ICS：77.040.20 CCS：发布：2022-12-01 实施：

ASTM B86-2013 锌和锌铝(ZA)合金铸造和压铸件的标准规格
简介：1.1x00a0;This specification covers commercial zinc, zinc-aluminum castings and continuous cast bar stock, as designated and specified in Table 1. Seven alloy compositions are specified and designated as follows: Common Traditional ASTM A UNS x00a0; x00a0; x00a0; x00a0; Alloy 3 Zamak 3 AG 40A B Z33525 Alloy 7 Zamak 7 AG 40B Z33527 Alloy 5 Zamak 5 AC 41A B Z35533 Alloy 2 Zamak 2 AC 43A Z35545 ZA-8 ZA-8 8199;... Z35638 ZA-12 ZA-12 8199;... Z35633 ZA-27 ZA-27 8199;... Z35841
信息：ICS：77.150.60 (Lead, zinc and tin products) CCS：H62 发布：2013 实施：

ASTM B240-05 标准号码适用于铸造和压铸件的锌锭和锌铝（ZA）合金锭
简介：
信息：ICS：77.150.60 CCS：发布：2005-11-01 实施：

ASTM E505-22 铝和镁压铸件检验用标准参考射线照片
简介：
信息：ICS：77.040.20 CCS：发布：2022-12-01 实施：

ASTM B985-12 铝锭坯料铸件和成品或半成品锻造铝产品进行成分分析的标准做法
简介：
信息：ICS：77.150.10 CCS：发布：2012-12-01 实施：

ASTM E2422-05 用于铝铸件检测的标准0716数cb5f字参考图像
简介：
信息：ICS：77.150.10 CCS：发布：2005-10-01 实施：

ASTM E155-20 铝和镁铸件检验标准参考射线照相
简介：
信息：ICS：77.040.20 CCS：发布：2020-06-01 实施：

ASTM E2422-11 用于铝铸件检测的标准0716数cb5f字参考图像
简介：
信息：ICS：77.150.10 CCS：发布：2011-12-01 实施：

ASTM E155-00(2005)e1 铝和镁铸件检验标准参考射线照相
简介：
信息：ICS：77.040.20 CCS：发布：2005-01-01 实施：

ASTM E2422-17 用于铝铸件检测的标准0716数cb5f字参考图像
简介：
信息：ICS：77.150.10 CCS：发布：2017-11-01 实施：

ASTM E505-01(2011) 铝和镁压铸件的标准参考射线照相
简介：
信息：ICS：77.040.20 CCS：发布：2011-08-01 实施：

ASTM E155-2005 铝和镁铸件检验用标准基准射线照相术
简介：1.1 These reference radiographs illustrate the types and degrees of discontinuities that may be found in aluminum-alloy and magnesium-alloy castings. The castings illustrated are in thicknesses of 1/4 in. [6.35 mm] and 3/4 in. [19.1 mm]. The reference radiograph films are an adjunct to this document and must be purchased separately from ASTM International if needed.1.2 These film reference radiographs are not intended to illustrate the types and degrees of discontinuities found in aluminum-alloy castings when performing digital radiography. If performing digital radiography of aluminum-alloy castings, refer to Digital Refererence Image Standard E 2422. Magnesium-alloy digital reference images are not currently available from ASTM International.1.3 This document may be used where no other applicable document exists, for other material thicknesses for which it has been found to be applicable and for which agreement has been reached between the purchaser and the manufacturer.1.4 The values stated in inch-pound units are to be regarded as the standard.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.Note 18212;Vol I:The set of reference radiographs consists of 13 plates covering discontinuities in aluminum-alloy castings and 10 plates covering discontinuities in magnesium-alloy castings. Each plate is held in an 81/2 by 11-in. [216 by 279-mm] cardboard frame and each plate illustrates eight grades of severity for the discontinuity in approximately a 2 by 2-in. [51 by 51-mm] area. The cardboard frames are contained in a 101/2 by 111/2-in. [267 by 292-mm] ring binder.Vol. II: The set of reference radiographs consists of four plates covering discontinuities in magnesium-alloy castings only. Each plate is held in an 81/2 by 11-in. [216 by 279-mm] cardboard frame and illustrates eight grades of severity for the discontinuity (with the exception of discrete discontinuities, where only one example of each discontinuity is given).Note 28212;Reference radiographs applicable to aluminum and magnesium die castings up to 1 in. [25 mm] in thickness are contained in Reference Radiographs E 505.
信息：ICS： CCS：H61 发布：2005 实施：

ASTM B240-17 标准号码适用于铸造和压铸件的锌锭和锌铝（ZA）合金锭
简介：
信息：ICS：77.150.60 CCS：发布：2017-11-01 实施：

ASTM E2422-2011 检验铝铸件的标准数字参考图像
简介：1.1 These digital reference images illustrate the types and degrees of discontinuities that may be found in aluminum-alloy castings. The castings illustrated are in thicknesses of 1/ 4 in. [6.35 mm] and 3/4 in. [19.1mm].1.2 All areas of this standard may be open to agreement between the cognizant engineering organization and the supplier, or specific direction from the cognizant engineering organization. These items should be addressed in the purchase order or the contract.1.3 The values stated in inch-pound units are to be regarded as standard.1.4 These digital reference images are not intended to illustrate the types and degrees of discontinuities found in aluminum-alloy castings when performing film radiography. If performing film radiography of aluminum-alloy castings, refer to Reference Radiographs E 155.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.5 Only licensed copies of the software and images shall be utilized for production inspection. A copy of the ASTM/User license agreement shall be kept on file for audit purposes.Note 1The set of digital reference images consists of 13 digital files, software to load the desired format and specific instructions on the loading process. The 13 reference images illustrate eight grades of severity and contain an image of a step wedge and two line pair gauges. Refer to Practice E 2002 for line pair gauge details.Note 2Reference radiographs applicable to aluminum and magnesium die castings up to 1 in. [25 mm] in thickness are contained in Reference Radiographs E 505.
信息：ICS：77.150.10 (Aluminium products) CCS：H61 发布：2011 实施：

ASTM E2422-2005 检验铝铸件的标准数字参考图像
简介：1.1 These digital reference images illustrate the types and degrees of discontinuities that may be found in aluminum-alloy castings. The castings illustrated are in thicknesses of 1/ 4 in. [6.35 mm] and 3/4 in. [19.1mm].1.2 All areas of this standard may be open to agreement between the cognizant engineering organization and the supplier, or specific direction from the cognizant engineering organization. These items should be addressed in the purchase order or the contract.1.3 The values stated in inch-pound units are to be regarded as standard.1.4 These digital reference images are not intended to illustrate the types and degrees of discontinuities found in aluminum-alloy castings when performing film radiography. If performing film radiography of aluminum-alloy castings, refer to Reference Radiographs E 155.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.5 Only licensed copies of the software and images shall be utilized for production inspection. A copy of the ASTM/User license agreement shall be kept on file for audit purposes.Note 1The set of digital reference images consists of 13 digital files, software to load the desired format and specific instructions on the loading process. The 13 reference images illustrate eight grades of severity and contain an image of a step wedge and two line pair gauges. Refer to Practice E 2002 for line pair gauge details.Note 2Reference radiographs applicable to aluminum and magnesium die castings up to 1 in. [25 mm] in thickness are contained in Reference Radiographs E 505.
信息：ICS：77.150.10 (Aluminium products) CCS：H61 发布：2005 实施：

ASTM B240-2017 铸造和压模铸件用铸锭结构中锌和锌铝(ZA)合金的标准规格
简介：1.1x00a0;This specification covers commercial zinc and zinc-aluminum (ZA) alloys in ingot form for remelting for the manufacture of pressure die castings, foundry castings and continuous cast bar stock as designated and specified in Table 1. Seven alloy compositions are specified, designated as follows: Common Traditional ASTMA UNSA x00a0; x00a0; x00a0; x00a0; Alloy 3 Zamak 3 AG 40A Z33524 Alloy 7 Zamak 7 AG 40B Z33526 Alloy 5 Zamak 5 AC 41A Z35532 Alloy 2 Zamak 2 AC 43A Z35544 ZA-8 ZA-8x2007; ... Z35637 ZA-12 ZA-12
信息：ICS：77.150.60 CCS：H62 发布：2017 实施：

ASTM E155-10 铝和镁铸件检验标准参考射线照相
简介：
信息：ICS：77.040.20 CCS：发布：2010-09-01 实施：

ASTM B240-04 标准号码适用于铸造和压铸件的锌锭和锌铝（ZA）合金锭
简介：
信息：ICS：77.150.60 CCS：发布：2004-10-01 实施：

ASTM B985-12(2016) 铝锭坯料铸件和成品或半成品锻造铝产品进行成分分析的标准做法
简介：
信息：ICS：77.150.10 CCS：发布：2016-11-01 实施：

ASTM B240-10 标准号码适用于铸造和压铸件的锌锭和锌铝（ZA）合金锭
简介：
信息：ICS：77.150.60 CCS：发布：2010-04-01 实施：

ASTM B240-04e1 标准号码适用于铸造和压铸件的锌锭和锌铝（ZA）合金锭
简介：
信息：ICS：77.150.60 CCS：发布：2004-10-01 实施：

ASTM A1002-2016 镍铝有序合金铸件的标准规格
简介：1.1x00a0;This specification covers nickel-aluminum ordered alloy castings intended for elevated-temperature applications such as heat-resisting alloy furnace rollers, supports, hangers, and so forth, in environments up to 23008201;x00b0;F (12608201;x00b0;C). 1.2x00a0;The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.2.1x00a0;The SI gage length for tension test specimens is in brackets and is considered standard.
信息：ICS：77.120.01 CCS：H60 发布：2016 实施：

ASTM B86-2010a 锌和锌铝(ZA)合金铸造和压铸件标准规格
简介：1.1 This specification covers commercial zinc, zinc-aluminum castings and continuous cast bar stock, as designated and specified in Table 1. Seven alloy compositions are specified and designated as follows:
信息：ICS：77.150.60 CCS：J31 发布：2010 实施：

ASTM F1108-04 用于外科植入物的钛-6A铝-4钒合金铸件标准规格（UNS R56406）
简介：
信息：ICS：11.040.40 CCS：发布：2004-04-01 实施：

ASTM E505-15 铝和镁压铸件的标准参考射线照相
简介：
信息：ICS：77.040.20 CCS：发布：2015-09-01 实施：

ASTM B894-2010e1 ACuZinc5(锌铜铝)合金压铸件的标准规格
简介：1.1 This specification covers ACuZinc5, zinc-copper-aluminum alloy die castings. (UNS Z46541). 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
信息：ICS： CCS：J31 发布：2010 实施：

ASTM B240-03 标准号码适用于铸造和压铸件的锌锭和锌铝（ZA）合金锭
简介：
信息：ICS：77.150.60 CCS：发布：2003-06-10 实施：

ASTM E155-15 铝和镁铸件检验标准参考射线照相
简介：
信息：ICS：77.040.20 CCS：发布：2015-09-01 实施：

ASTM A1002-2010(2015) 镍铝有序合金铸件的标准规格
简介：1.1x00a0;This specification covers nickel-aluminum ordered alloy castings intended for elevated-temperature applications such as heat-resisting alloy furnace rollers, supports, hangers, and so forth, in environments up to 2300x00b0;F (1260x00b0;C). 1.2x00a0;The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.2.1x00a0;The SI gage length for tension test specimens is in brackets and is considered standard.
信息：ICS：77.120.01 CCS：发布：2010 实施：

ASTM F1108-02 用于外科植入物的钛-6A铝-4钒合金铸件标准规格（UNS R56406）
简介：
信息：ICS：11.040.40 CCS：发布：2002-04-10 实施：

ASTM E2973-15 标准数cb5f0716字参考图像用于检查铝和镁0716压铸件
简介：
信息：ICS：77.040.20 CCS：发布：2015-01-01 实施：

ASTM E155-2010 铝和镁铸件检验用标准参考射线照相
简介：These radiographs are intended for reference only but are so designed that acceptance standards, which may be developed for particular requirements, can be specified in terms of these radiographs. The illustrations are radiographs of castings that were produced under conditions designed to develop the discontinuities. The radiographs of the 1/4-in. (6.35-mm) castings are intended to be used in the thickness range up to and including 1/2 in. (12.7 mm). The radiographs of the 3/4-in. (19.1-mm) castings are intended to be used in the thickness range of over 1/2 in. to and including 2 in. (51 mm). The grouping and system of designations are based on considerations of the best practical means of making these reference radiographs of the greatest possible value. Film DeteriorationRadiographic films are subject to wear and tear from handling and use. The extent to which the image deteriorates over time is a function of storage conditions, care in handling and amount of use. Reference radiograph films are no exception and may exhibit a loss in image quality over time. The radiographs should therefore be periodically examined for signs of wear and tear, including scratches, abrasions, stains, and so forth. Any reference radiographs which show signs of excessive wear and tear which could influence the interpretation and use of the radiographs should be replaced.1.1 These reference radiographs illustrate the types and degrees of discontinuities that may be found in aluminum-alloy and magnesium-alloy castings. The castings illustrated are in thicknesses of 1/4 in. (6.35 mm) and 3/4 in. (19.1 mm). The reference radiograph films are an adjunct to this document and must be purchased separately from ASTM International if needed. 1.2 These film reference radiographs are not intended to illustrate the types and degrees of discontinuities found in aluminum-alloy castings when performing digital radiography. If performing digital radiography of aluminum-alloy castings, refer to Digital Reference Image Standard E2422. Magnesium-alloy digital reference images are not currently available from ASTM International. 1.3 This document may be used where no other applicable document exists, for other material thicknesses for which it has been found to be applicable and for which agreement has been reached between the purchaser and the manufacturer. 1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 18212;Vol I: The set of reference radiographs consists of 13 plates covering discontinuities in aluminum-alloy castings and 10 plates covering discontinuities in magnesium-alloy castings. Each plate is held in an 81/2 by 11-in. (216 by 279-mm) cardboard frame and each plate illustrates eight grades of severity for the discontinuity in approximately a 2 by 2-in. (51 by 51-mm) area. The cardboard frames are contained in a 101/2 by 111/2-in. (267 by 292-mm) ring b......
信息：ICS：77.040.20;77.150.10;77.150.20 CCS：H26 发布：2010 实施：

ASTM E505-01 铝和镁压铸件的标准参考射线照相
简介：
信息：ICS：77.040.20 CCS：发布：2001-06-10 实施：

ASTM E155-2015 铝, 镁铸件检验用标准参考射线照片
简介：4.1x00a0;These radiographs are intended for reference only but are so designed that acceptance standards, which may be developed for particular requirements, can be specified in terms of these radiographs. The illustrations are radiographs of castings that were produced under conditions designed to develop the discontinuities. The radiographs of the 1/4-in. (6.35-mm) castings are intended to be used in the thickness range up to and including 1/2x00a0;in. (12.7 mm). The radiographs of the 3/4-in. (19.1-mm) castings are intended to be used in the thickness range of over 1/2x00a0;in. to and including 2 in. (51 mm). The grouping and system of designations are based on considerations of the best practical means of making these reference radiographs of the greatest possible value. 4.2x00a0;Film Deteriorationx2014;Radiographic films are subject to wear and tear from handling and use. The extent to which the image deteriorates over time is a function of storage conditions, care in handling and amount of use. Reference radiograph films are no exception and may exhibit a loss in image quality over time. The radiographs should therefore be periodically examined for signs of wear and tear, including scratches, abrasions, stains, and so forth. Any reference radiographs which show signs of excessive wear and tear which could influence the interpretation and use of the radiographs should be replaced. 1.1x00a0;These reference radiographs illustrate the types and degrees of discontinuities that may be found in aluminum-alloy and magnesium-alloy castings. The castings illustrated are in thicknesses of 1/4x00a0;in. (6.35 mm) and 3/4x00a0;in. (19.1 mm). The reference radiograph films are an adjunct to this document and must be purchased separately from ASTM International if needed. 1.2x00a0;These film reference radiographs are not intended to illustrate the types and degrees of discontinuities found in aluminum-alloy and magnesium-alloy castings when performing digital radiography. If performing digital radiography of aluminum-alloy castings, refer to Digital Reference Image Standard E2422. If performing digital radiography of magnesium-alloy castings, refer to Digital Reference Image Standard E2869. 1.3x00a0;This document may be used where no other applicable document exists, for other material thicknesses for which it has been found to be applicable and for which agreement has been reached between the purchaser and the manufacturer. 1.4x00a0;From time to time, there may be minor changes to the process for manufacturing of the reference radiograph adjunct materials. These changes could include changes in the films or processing chemicals used, changes in the dies or printing for the cardboard mats, etc.; however, in all cases, these changes are reviewed by the Illustration Monitoring Subcommittee and all reference radiographs are reviewed against a fixed prototype image to ensure that there are no changes to the acceptance level represented by the reference radiographs. Therefore, the adjunct reference radiographs remain valid for use with this standard regardless of the date of production......
信息：ICS： CCS：发布：2015 实施：

ASTM B240-09 标准号码适用于铸造和压铸件的锌锭和锌铝（ZA）合金锭
简介：
信息：ICS：77.120.60 CCS：发布：2009-10-01 实施：

ASTM E505-96 铝和镁压铸件的标准参考射线照相
简介：
信息：ICS：77.040.20 CCS：发布：2001-06-10 实施：

ASTM E505-2015 铝和镁铸件检验用标准参考射线照片
简介：5.1x00a0;These radiographs are so designed that acceptance standards, which may be developed for particular requirements, can be specified in terms of these radiographs. The radiographs are of castings that were produced under conditions designed to produce the discontinuities. These reference radiographs are intended to be used for casting thickness ranges in accordance with Table 1. 5.2x00a0;The radiographic illustrations listed in Table 1 illustrate three types of discontinuities in four severity levels. Two ungraded illustrations have been included to establish the radiographic appearance of foreign material. 5.3x00a0;These reference radiographs were produced in accordance with Guide E94. All of the references are original radiographs. 5.4x00a0;Film Deteriorationx2014;Radiographic films are subject to wear and tear from handling and use. The extent to which the image deteriorates over time is a function of storage conditions, care in handling and amount of use. Reference radiograph films are no exception and may exhibit a loss in image quality over time. The radiographs should therefore be periodically examined for signs of wear and tear, including scratches, abrasions, stains, and so forth. Any reference radiographs which show signs of excessive wear and tear which could influence the interpretation and use of the radiographs should be replaced. 1.1x00a0;These reference radiographs illustrate the categories and severity levels of discontinuities that may occur in aluminum-alloy and magnesium-alloy die castings. They are intended to provide: 1.1.1x00a0;A guide enabling recognition of discontinuities and their differentiation both as to type and severity level through radiographic examination. 1.1.2x00a0;Example radiographic illustrations of discontinuities and a nomenclature for reference in acceptance standards, specifications, and drawings. Note 1:x00a0;The set of reference radiographs consists of five 81/2x00a0;by 11-in. cardboard frames containing radiographs covering discontinuities in aluminum and magnesium alloy die castings. The first four frames each contain two sets of four graded levels of increasing severity, while the last frame contains two ungraded radiographs. The 5 frames are contained in a 101/2x00a0;by 111/2-in. ring binder. Note 2:x00a0;Reference radiographs applicable to aluminum and magnesium castings up to 2 in. (50 mm) in thickness are contained in ASTM Reference Radiographs E155, for Inspection of Aluminum and Magnesium Castings, Volumes I and II. 1.2x00a0;Two kinds of illustration categories are covered as follows:
信息：ICS：77.040.20 CCS：发布：2015 实施：

FORD WSS-M2A171-A1-2009 通用铝压铸件***与标准FORD WSS-M99P1111-A一起使用***
简介：
信息：ICS： CCS：发布：2009-06-24 实施：

ASTM B240-98e1 标准号码适用于铸造和压铸件的锌锭和锌铝（ZA）合金锭
简介：
信息：ICS：77.150.60 CCS：发布：2001-05-10 实施：

ASTM E2973-2015 检查铝和镁压铸件的标准数字参考图像
简介：1.1x00a0;These digital reference images illustrate various categories, types, and severity levels of discontinuities that may occur in aluminum-alloy and magnesium-alloy die castings. They are intended to provide: 1.1.1x00a0;A guide enabling recognition of discontinuities and their differentiation both as to type and severity level through digital radiographic imaging. 1.1.2x00a0;Example digital radiographic illustrations of discontinuities and a nomenclature for reference in acceptance standards, specifications, and drawings. Note 1:x00a0;The basis of application for these reference images requires a prior purchaser supplier agreement of radiographic examination attributes and acceptance criteria as described in Sections 5 and 6 of this standard. 1.2x00a0;These digital reference images consist of nine images covering discontinuities in aluminum and magnesium alloy die castings. Four contain graded sequences of four levels of increasing severity in aluminum castings. Four contain graded sequences of four levels of increasing severity in magnesium castings. The last image contains ungraded illustrations of inclusions in aluminum and magnesium alloy die castings. 1.3x00a0;Two kinds of illustration categories are covered as follows: 1.3.1x00a0;Gradedx2014;Three discontinuity categories for aluminum die castings and three discontinuity categories for magnesium die castings, each illustrated in four levels of progressively increasing severity. Category A discontinuities are illustrated for aluminum and magnesium die castings having thicknesses of 1/8x00a0;in. (3.2 mm) and 5/8x00a0;in. (15.9 mm); Category B discontinuities are illustrated for 1/8x00a0;in. thick aluminum and magnesium die castings; and Category C discontinuities are illustrated for 5/8x00a0;in. (15.9 mm) thick aluminum and magnesium die castings. 1.3.2x00a0;Ungradedx2014;One illustration of one discontinuity for 0.20 in. (5.1 mm) thickness aluminum die casting and one illustration of one discontinuity for 1/8x00a0;in. (3.2 mm) thickness magnesium die casting. 1.4x00a0;This document may be used for other materials, thicknesses or with other energy levels for which it has been found to be applicable and agreement has been reached between purchaser and supplier. 1.5x00a0;All areas of this standard may be open to agreement between the cognizant engineering organization and the supplier, or specific direction from the cognizant engineering organization. These items should be addressed in the purchase order or the contract. 1.6x00a0;These digital reference images are not ......
信息：ICS： CCS：发布：2015 实施：

FORD WSS-M2A171-A2-2009 中等负荷用途用铝压铸件***与标准FORD WSS-M99P1111-A一起使用***列于标准FORD WSS-M2A171-A1上
简介：
信息：ICS： CCS：发布：2009-06-24 实施：

ASTM B240-01 标准号码适用于铸造和压铸件的锌锭和锌铝（ZA）合金锭
简介：
信息：ICS： CCS：发布：2001-05-10 实施：

ASTM F1108-14 用于外科植入物的钛-6A铝-4钒合金铸件标准规格（UNS R56406）
简介：
信息：ICS：11.040.40 CCS：发布：2014-11-01 实施：

ASTM F1108-04(2009) 用于外科植入物的钛-6A铝-4钒合金铸件标准规格（UNS R56406）
简介：
信息：ICS：11.040.40 CCS：发布：2009-04-01 实施：

ASTM B240-01e1 标准号码适用于铸造和压铸件的锌锭和锌铝（ZA）合金锭
简介：
信息：ICS：77.150.60 CCS：发布：2001-05-10 实施：

ASTM E155-14 铝和镁铸件检验标准参考射线照相
简介：
信息：ICS：77.040.20 CCS：发布：2014-10-01 实施：

ASTM B240-07 标准号码适用于铸造和压铸件的锌锭和锌铝（ZA）合金锭
简介：
信息：ICS： CCS：发布：2007-07-01 实施：

ASTM E505-2001 铝和镁压模铸件检验用标准参考射线照相
简介：1.1 These reference radiographs illustrate the categories and severity levels of discontinuities that may occur in aluminum-alloy and magnesium-alloy die castings. They are intended to provide:1.1.1 A guide enabling recognition of discontinuities and their differentiation both as to type and severity level through radiographic examination.1.1.2 Example radiographic illustrations of discontinuities and a nomenclature for reference in acceptance standards, specifications, and drawings.1.1.3 The values stated in inch-pounds are to be regarded as standard. Note 18212;The set of reference radiographs consists of five 8frac12; by 11-in. cardboard frames containing radiographs covering discontinuities in aluminum and magnesium alloy die castings. The first four frames each contain two sets of four graded levels of increasing severity, while the last frame contains two ungraded radiographs. The 5 frames are contained in a 10frac12; by 11frac12;-in. ring binder.Note 28212;Reference radiographs applicable to aluminum and magnesium castings up to 2 in. (50 mm) in thickness are contained in ASTM Reference Radiographs E 155, for Inspection of Aluminum and Magnesium Castings, Volumes I and II.1.2 Two kinds of illustration categories are covered as follows:1.2.1 Graded8212;Three discontinuity categories for aluminum die castings and three discontinuity categories for magnesium die castings, each illustrated in four levels of progressively increasing severity. Category A discontinuities are illustrated for aluminum and magnesium die castings having thicknesses of 1/8 in. (3.2 mm) and 5/8 in. (15.9 mm); Category B discontinuities are illustrated for 1/ 8-in. thick aluminum and magnesium die castings; and Category C discontinuities are illustrated for 5/8-in. thick aluminum and magnesium die castings.1.2.2 Ungraded8212;One illustration of one discontinuity for 0.20-in. (5.1-mm) thickness aluminum die casting; and one illustration of one discontinuity for 1/8-in. (3.2-mm) thickness magnesium die casting.1.3 This document may be used for other materials, thicknesses, or with other energy levels for which it has been found to be applicable and agreement has been reached between the purchaser and manufacturer.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：77.040.20 (Non-destructive testing of metals) CCS：H24 发布：2001 实施：

ASTM F1108-2014 外科植入物用钛-6铝-4钒合金铸件的标准规格 (UNS R56406)
简介：1.1x00a0;This specification covers the chemical, mechanical, and metallurgical requirements for cast titanium-6aluminum-4vanadium alloy (UNS R56406). 1.2x00a0;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.
信息：ICS：11.040.40 CCS：发布：2014 实施：

ASTM B240-07e1 标准号码适用于铸造和压铸件的锌锭和锌铝（ZA）合金锭
简介：
信息：ICS：77.120.60 CCS：发布：2007-07-01 实施：

ASTM E505-2001(2011) 铝和镁压铸件检验用标准射线参考照片
简介：These radiographs are so designed that acceptance standards, which may be developed for particular requirements, can be specified in terms of these radiographs. The radiographs are of castings that were produced under conditions designed to produce the discontinuities. These reference radiographs are intended to be used for casting thickness ranges in accordance with Table 1. The radiographic illustrations listed in Table 1 illustrate three types of discontinuities in four severity levels. Two ungraded illustrations have been included to establish the radiographic appearance of foreign material. These reference radiographs were produced in accordance with Guide E94. All of the references are original radiographs. Film Deterioration8212;Radiographic films are subject to wear and tear from handling and use. The extent to which the image deteriorates over time is a function of storage conditions, care in handling and amount of use. Reference radiograph films are no exception and may exhibit a loss in image quality over time. The radiographs should therefore be periodically examined for signs of wear and tear, including scratches, abrasions, stains, and so forth. Any reference radiographs which show signs of excessive wear and tear which could influence the interpretation and use of the radiographs should be replaced. TABLE 1 Reference Radiographs for Aluminum and Magnesium Die Castings DiscontinuityPlate Thickness, in. (mm)Applicable Casting Thickness, in. (mm) Aluminum Die Castings Category A (Porosity)1/8 (3.2)up to 3/8 (9.5), incl Category A (Porosity)5/8 (15.9)over 3/8 to 1 (9.5 to 25.4), incl Category B (Cold fill)1/8 (3.2)up to 3/8 (9.5), incl Category C (Shrinkage)5/8 (15.9)over 3/8 to 1 (9.5 to 25.4), incl Category D (Foreign material)0.200 (5.08)up to 1 (25.4), incl Magnesium Die Castings Category A (Porosity)1/8 (3.2)up to 3/8 (9.5), incl Category A (Porosity)5/8 (15.9)over 3/8 to 1 (9.5 to 25.4), incl Category B (Cold fill)1/8 (3.2)
信息：ICS：77.040.20 (Non-destructive testing of metals) CCS：H24 发布：2001 实施：

ASTM B148-2014 铝青铜砂型铸件标准规格
简介：1.1x00a0;This specification establishes requirements for sand castings produced from copper-base alloys having the alloy numbers,2 commercial designations, and nominal compositions shown in Table 1.TABLE 1 Nominal Compositions Copper Alloy UNS No. Old Designation Commercial Designation Nominal Composition, % Copper Nickel Iron Aluminum Silicon Manganese 8199;8199;C95200 9A Grade A 88.0 . . . 3.0 9.0 . . . . . . 8199;8199;C95300A 9B Grade B
信息：ICS：77.150.10 (Aluminium products) CCS：D42 发布：2014 实施：

ASTM E505-01(2006) 铝和镁压铸件的标准参考射线照相
简介：
信息：ICS：77.040.20 CCS：发布：2006-12-01 实施：

ASTM E505-2001(2006) 铝和镁压模铸件检验用标准参考射线照相
简介：1.1 These reference radiographs illustrate the categories and severity levels of discontinuities that may occur in aluminum-alloy and magnesium-alloy die castings. They are intended to provide:1.1.1 A guide enabling recognition of discontinuities and their differentiation both as to type and severity level through radiographic examination.1.1.2 Example radiographic illustrations of discontinuities and a nomenclature for reference in acceptance standards, specifications, and drawings.1.1.3 The values stated in inch-pounds are to be regarded as standard. Note 1The set of reference radiographs consists of five 81/2 by 11-in. cardboard frames containing radiographs covering discontinuities in aluminum and magnesium alloy die castings. The first four frames each contain two sets of four graded levels of increasing severity, while the last frame contains two ungraded radiographs. The 5 frames are contained in a 101/2 by 111/2-in. ring binder.Note 2Reference radiographs applicable to aluminum and magnesium castings up to 2 in. (50 mm) in thickness are contained in ASTM Reference Radiographs E 155, for Inspection of Aluminum and Magnesium Castings, Volumes I and II.1.2 Two kinds of illustration categories are covered as follows:1.2.1 Graded - Three discontinuity categories for aluminum die castings and three discontinuity categories for magnesium die castings, each illustrated in four levels of progressively increasing severity. Category A discontinuities are illustrated for aluminum and magnesium die castings having thicknesses of 1/8in. (3.2 mm) and 5/8 in. (15.9 mm); Category B discontinuities are illustrated for 1/ 8-in. thick aluminum and magnesium die castings; and Category C discontinuities are illustrated for 5/8-in. thick aluminum and magnesium die castings.1.2.2 Ungraded - One illustration of one discontinuity for 0.20-in. (5.1-mm) thickness aluminum die casting; and one illustration of one discontinuity for 1/8-in. (3.2-mm) thickness magnesium die casting.1.3 This document may be used for other materials, thicknesses, or with other energy levels for which it has been found to be applicable and agreement has been reached between the purchaser and manufacturer.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：77.040.20 (Non-destructive testing of metals) CCS：H24 发布：2001 实施：

ASTM E155-2014 铝, 镁铸件检验用标准参考射线底片
简介：4.1x00a0;These radiographs are intended for reference only but are so designed that acceptance standards, which may be developed for particular requirements, can be specified in terms of these radiographs. The illustrations are radiographs of castings that were produced under conditions designed to develop the discontinuities. The radiographs of the 1/4-in. (6.35-mm) castings are intended to be used in the thickness range up to and including 1/2x00a0;in. (12.7 mm). The radiographs of the 3/4-in. (19.1-mm) castings are intended to be used in the thickness range of over 1/2x00a0;in. to and including 2 in. (51 mm). The grouping and system of designations are based on considerations of the best practical means of making these reference radiographs of the greatest possible value. 4.2x00a0;Film Deteriorationx2014;Radiographic films are subject to wear and tear from handling and use. The extent to which the image deteriorates over time is a function of storage conditions, care in handling and amount of use. Reference radiograph films are no exception and may exhibit a loss in image quality over time. The radiographs should therefore be periodically examined for signs of wear and tear, including scratches, abrasions, stains, and so forth. Any reference radiographs which show signs of excessive wear and tear which could influence the interpretation and use of the radiographs should be replaced. 1.1x00a0;These reference radiographs illustrate the types and degrees of discontinuities that may be found in aluminum-alloy and magnesium-alloy castings. The castings illustrated are in thicknesses of 1/4x00a0;in. (6.35 mm) and 3/4x00a0;in. (19.1 mm). The reference radiograph films are an adjunct to this document and must be purchased separately from ASTM International if needed. 1.2x00a0;These film reference radiographs are not intended to illustrate the types and degrees of discontinuities found in aluminum-alloy and magnesium-alloy castings when performing digital radiography. If performing digital radiography of aluminum-alloy castings, refer to Digital Reference Image Standard E2422. If performing digital radiography of magnesium-alloy castings, refer to Digital Reference Image Standard E2869. 1.3x00a0;This document may be used where no other applicable document exists, for other material thicknesses for which it has been found to be applicable and for which agreement has been reached between the purchaser and the manufacturer. 1.4x00a0;The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS： CCS：发布：2014 实施：

ASTM B240-06 标准号码适用于铸造和压铸件的锌锭和锌铝（ZA）合金锭
简介：
信息：ICS：77.150.60 CCS：发布：2006-08-01 实施：

ASTM E155-00 铝和镁铸件检验标准参考射线照相
简介：
信息：ICS：77.040.20 CCS：发布：2000-12-10 实施：