铅、镉检测检测标准铅、镉检测-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

铅、镉检测相关标准参考信息

GB/T 11060.3-2018 天然气含硫化合物的测定第3部分：用乙酸铅反应速率双光路检测法测定硫化氢含量
简介：
信息：ICS：75.060 CCS：E24 发布：2018-09-17 实施：2019-04-01 00:00:00.0

SN/T 3881-2014 进出口包装材料中砷、钡、镉、铬、汞、铅、硒、锑的检测 ICP-MS法
简介：本标准规定了进出口包装材料中砷(As)、钡(Ba)、镉(Cd)、铬(Cr)、汞(Hg)、铅(Pb)、硒(Se)和锑(Sb)的电感耦合等离子体质谱(ICP-MS)测定方法。本标准适用于塑料、纸质和木质包装材料等进出口包装材料中的砷、钡、镉、铬、汞、铅、硒和锑的测定。
信息：ICS： CCS：发布：2014-01-13 实施：2014-08-01

MSZ 8655/5.lap-1968 锌检测铅和镉含量检测
简介：
信息：ICS： CCS：发布：1968 实施：

GOST ISO 8819-2013 液化石油气. 硫化氢的检测. 乙酸铅法
简介：
信息：ICS：75.160.30 CCS：发布：2013 实施：2015-01-01

MSZ 8651/6.lap-1968 铅化学检测．砷含量检测
简介：
信息：ICS： CCS：发布：1968 实施：

GB/T 11060.3-2010 天然气含硫化合物的测定第3部分：用乙酸铅反应速率双光路检测法测定硫化氢含量
简介：本部分规定了用乙酸铅反应速率法测定天然气中硫化氢含量的试验方法。本部分适用于天然气中硫化氢(HS)含量的测定。空气无干扰。测定范围为0.1×10～16×10(φ),约相当于0.1 mg/m～22 mg/m；并且可通过手动或自动的体积稀释将测定范围扩展到较高浓度。也适用于液化石油气(LPG)、天然气代用品和燃料气混合物中硫化氢含量的测定。本部分不涉及与其应用有关的所有安全问题。在使用本部分前，使用者有责任制定相应的安全和保护措施，并明确其限定的适用范围。
信息：ICS：75.060 CCS：E24 发布：2010-08-09 实施：2010-12-01

BS EN 15997-2011 全地形车辆(ATVs-空铅).检测方法和安全性要求
简介：
信息：ICS：43.140 CCS：T44 发布：2012-04-30 实施：2012-04-30

MSZ 8651/5.lap-1968 铅化学检测0,01－0,1%铋含量检测
简介：
信息：ICS： CCS：发布：1968 实施：

GB/Z 21274-2007 电子电气产品中限用物质铅、汞、镉检测方法
简介：本指导性技术文件规定了各类电子电气产品中铅、汞、镉的测定方法。本指导性技术文件适用于各类电子产品中的铅、汞、镉的测定。
信息：ICS：31.020 CCS：L10 发布：2007-12-20 实施：2008-06-01

SN/T 0448-2011 进出口食品中砷、汞、铅、镉的检测方法.电感耦合等离子体质谱（ICP-MS）法
简介：本标准规定了用电感耦合等离子体质谱法（以下简称ICP-MS）法测定进出口食品中砷、铅、汞、镉含量的方法。本标准适用于进出口食品（不包括食品添加剂）中砷、铅、汞、镉含量的测定。
信息：ICS： CCS：C53 发布：2011-02-25 实施：2011-07-01

MSZ 8651/3.lap-1968 铅化学检测．铜和铋含量检测
简介：
信息：ICS： CCS：发布：1968 实施：

GB 8058-2003 陶瓷烹调器铅、镉溶出量允许极限和检测方法
简介：本标准规定了陶瓷烹调器铅、镉溶出量的允许极限和检测方法。本标准适用于与食物接触的砂锅、汽锅、火锅、炒锅、热煲等各类陶瓷质烹调制品。
信息：ICS：81.060.01 CCS：Y20 发布：2003-06-13 实施：2003-12-01

SN/T 2288-2009 进出口化妆品中铍、镉、铊、铬、砷、碲、钕、铅的检测方法.电感耦合等离子体质谱法
简介：本标准规定了化妆品中铍、镉、铊、铬、砷、碲、钕、铅等电感耦合等离子体质谱的检测方法。本标准适用于化妆品中铍、镉、铊、铬、砷、碲、钕、铅的测定。
信息：ICS：71.100.70 CCS：Y42 发布：2009-02-20 实施：2009-09-01

MSZ 8651/2.lap-1968 铅化学检测．银含量检测
简介：
信息：ICS： CCS：发布：1968 实施：

GB 8058-1987 陶瓷烹调器铅、镉溶出量允许极限和检测方法
简介：本标准适用于与食物接触的砂锅、汽锅、“茶煲”、火锅及妙锅等陶瓷烹调器制品。
信息：ICS： CCS：发布：1987-07-13 实施：1988-03-01

GJB 5969.10-2007 潜艇核动力装置用涂铌二氧化铀微球检测方法第10部分:铅、锌和镉的测定离子色谱法
简介：本部分规定了涂铌二氧化铀微球中镉、铅和锌测定使用的试剂和材料、仪器、测定步骤、结果计算和方法精密度。本部分适用于涂铌二氧化铀微球中杂质元素镉、铅、锌含量的测定，称样量约为 0.2g 时，测定范围分别为 Cd 0.25μg/g～3.0μg/g，Pb2.5μ g/g～50μg/g，Zn 2.5μg/g～50μg/g
信息：ICS： CCS：U46 发布：2007-10-10 实施：2008-03-01

MSZ 8651/15.lap-1968 铅化学检测．硫磺含量检测
简介：
信息：ICS： CCS：发布：1968 实施：

DB13/T 5396-2021 农田土壤中镉、砷、铅、铬、铜、镍、锌的快速检测能量色散型X射线荧光光谱法
简介：
信息：ICS：13.080.99 CCS：B 11 发布：2021-07-28 实施：2021-08-28

ASTM E2271-2005a(2012)e1 住宅和其他儿童设施中随着铅危害活性降低检测安全距离的标准实施规程
简介：A clearance examination of abatement areas and other areas associated with other lead-hazard control activities, or building maintenance or modification activities in single-family detached dwellings, multifamily dwellings having similar units, common areas or exterior sites, and child-occupied facilities is performed to determine that the clearance area is adequately safe for reoccupancy. It is the responsibility of the user of this standard to assure that all regulatory, contractual, and personnel requirements are met prior to conduct of a clearance examination. At a minimum, users of this standard shall be trained in its use and in safe practices for its conduct. This practice is one of a set of standards developed for lead hazard management activities. The visual assessment procedures required in this standard are found in Practice E2255 and the record keeping requirements are found in Practice E2239. Although this practice was primarily developed for dwellings and for other child-occupied facilities, this practice may be also applied to nonresidential buildings and related structures by agreement between the client and the individual conducting the clearance examination. This practice may be used by owners and property managers, including owner-occupants, and others responsible for maintaining facilities. It may also be used by lead hazard management consultants, construction contractors, labor groups, real estate and financial professionals, insurance organizations, legislators, regulators, and legal professionals. This standard does not address whether lead-hazard reduction activities or other building modification or maintenance work were done properly.1.1 This practice covers visual assessment for the presence of deteriorated paint, surface dust, painted debris, and paint chips with environmental sampling of surface dust to determine whether a lead hazard exists at the time of sample collection, following lead-hazard reduction activities, or other building maintenance and modification activities. 1.2 This practice addresses clearance examination of single-family detached dwellings (including exterior structures, such as fences), multifamily dwellings having similar units, common areas or exterior sites, and child-occupied facilities. 1.3 This practice also addresses clearance examinations that may include soil sampling, for example when soil abatement has been performed. 1.4 This practice includes a procedure for determining whether regulatory requirements for lead clearance levels for dust and, where warranted, soil have been met, and, consequently whether a clearance area, passes or fails a clearance examination. Note 18212;This practice is based on that portion of x201C;clearancex201D; described in 40 CFR Part 745 for abatement, and in 24 CFR 35 for lead-hazard reduction activities other than abatement, except that composite dust sampling is not used. 1.5 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：13.080.10 (Chemical characteristics of soil); 91.0 CCS：P33 发布：2005 实施：

MSZ 8651/14.lap-1968 铅化学含量检测．钙含量检测
简介：
信息：ICS： CCS：发布：1968 实施：

DB 13/T 5396-2021 农田土壤中镉、砷、铅、铬、铜、镍、锌的快速检测能量色散型X射线荧光光谱法
简介：因地方标准信息公布不透明，地方标准有效性更新或有延迟，望大家理解。本文件规定了能量色散型X射线荧光光谱法检测农田土壤中重金属元素的的术语和定义、方法原理、试剂和材料、仪器和设备、样品、分析步骤、试验数据处理、检出限和定量限、精密度、质量控制、注意事项。本文件适用于农田土壤中镉、砷、铅、铬、铜、镍、锌元素的快速检测。
信息：ICS： CCS：发布：2021-07-28 实施：2021-08-28

ASTM E2271-2005a 独院住宅和儿童设施中随着铅危害活性降低检测安全距离的标准实施规程
简介：A clearance examination of abatement areas and other areas associated with other lead-hazard control activities, or building maintenance or modification activities in single-family detached dwellings, multifamily dwellings having similar units, common areas or exterior sites, and child-occupied facilities is performed to determine that the clearance area is adequately safe for reoccupancy. It is the responsibility of the user of this standard to assure that all regulatory, contractual, and personnel requirements are met prior to conduct of a clearance examination. At a minimum, users of this standard shall be trained in its use and in safe practices for its conduct. This practice is one of a set of standards developed for lead hazard management activities. The visual assessment procedures required in this standard are found in Practice E 2255 and the record keeping requirements are found in Practice E 2239. Although this practice was primarily developed for dwellings and for other child-occupied facilities, this practice may be also applied to nonresidential buildings and related structures by agreement between the client and the individual conducting the clearance examination. This practice may be used by owners and property managers, including owner-occupants, and others responsible for maintaining facilities. It may also be used by lead hazard management consultants, construction contractors, labor groups, real estate and financial professionals, insurance organizations, legislators, regulators, and legal professionals. This standard does not address whether lead-hazard reduction activities or other building modification or maintenance work were done properly.1.1 This practice combines visual assessment for the presence of deteriorated paint, surface dust, painted debris, and paint chips with environmental sampling of surface dust to determine whether a lead hazard exists at the time of sample collection, following abatement, other lead-hazard reduction activities, or building maintenance or modification activities.1.2 This practice addresses clearance examination of single-family residential dwellings and child-occupied facilities.1.3 This practice also addresses clearance examinations that may include soil sampling, for example when soil abatement has been performed.1.4 This practice includes a procedure for determining whether regulatory requirements for lead clearance levels for dust and, where warranted, soil have been met, and, consequently whether a clearance area, passes or fails a clearance examination.Note 18212;This practice is consistent with that portion of "clearance" described in 40 CFR Part 745 for abatement, and in 24 CFR 35 for lead-hazard reduction activities other than abatement.1.5 The values stated in SI units are to be regarded as the standard.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：13.080.10 (Chemical characteristics of soil); 91.0 CCS：P04 发布：2005 实施：

MSZ 8651/12.lap-1968 铅化学检测．锰含量检测
简介：
信息：ICS： CCS：发布：1968 实施：

DB 13/T 5189.4-2020 天然植物提取物中危害成分检测第4部分：辣椒提取物中砷、铅、镉、铬、汞的测定
简介：本部分规定了辣椒提取物中砷、铅、镉、铬、汞的测定方法。本部分适用于辣椒提取物中砷、铅、镉、铬、汞的测定。
信息：ICS： CCS：发布：2020-06-28 实施：2020-07-28

ASTM E2271-2005 独院住宅和儿童设施中随着铅危害活性降低检测安全距离的标准实施规程
简介：1.1 This practice combines visual assessment for the presence of deteriorated paint, surface dust, painted debris, and paint chips with environmental sampling of surface dust to determine whether a lead hazard exists at the time of sample collection, following abatement, other lead-hazard reduction activities, or building maintenance or modification activities.1.2 This practice addresses clearance examination of single-family residential dwellings and child-occupied facilities.1.3 This practice also addresses clearance examinations that may include soil sampling, for example when soil abatement has been performed.1.4 This practice includes a procedure for determining whether regulatory requirements for lead clearance levels for dust and, where warranted, soil have been met, and, consequently whether a clearance area, passes or fails a clearance examination.Note 18212;This practice is consistent with that portion of "clearance" described in 40 CFR Part 745 for abatement, and in 24 CFR 35 for lead-hazard reduction activities other than abatement.1.5 The values stated in SI units are to be regarded as the standard.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：13.080.10 (Chemical characteristics of soil); 91.0 CCS：P04 发布：2005 实施：

MSZ 8651/11.lap-1968 铅化学检测．铁含量检测
简介：
信息：ICS： CCS：发布：1968 实施：

DB13/T 5189.4-2020 天然植物提取物中危害成分检测第4部分：辣椒提取物中砷、铅、镉、铬、汞的测定
简介：
信息：ICS：67 CCS：X 04 发布：2020-06-28 实施：2020-07-28

ASTM E1613-2004 以感应耦合等离子体原子发射光谱法(ICP-AES)、火焰原子吸收光谱(FAAS)或石墨炉原子吸收光谱(GFAAS)技术来检测铅的标准测试方法
简介：This test method is intended for use with other standards (see 2.1) that address the collection and preparation of samples (dried chips, dusts, soils, and air particulates) that are obtained during the assessment or mitigation of lead hazards from buildings and related structures. This test method may also be used to analyze similar samples from other environments.1.1 This test method is intended for use with extracted or digested samples that were collected during the assessment, management, or abatement of lead hazards from buildings, structures, or other locations.1.2 This test method covers the lead analysis of sample extracts or digestates (for example, extracted or digested paint, soil, dust, and airborne particulate) using inductively coupled plasma atomic emission spectrometry (ICP-AES), flame atomic absorption spectrometry (FAAS), or graphite furnace atomic absorption spectrometry (GFAAS).1.3 This test method contains directions for sample analysis, as well as quality assurance (QA) and quality control (QC), and may be used for purposes of laboratory accreditation and certification.1.4 No detailed operating instructions are provided because of differences among various makes and models of suitable instruments. Instead, the analyst shall follow the instructions provided by the manufacturer of the particular instrument.1.5 The values stated in SI units are to be regarded as the standard.1.6 This practice contains notes which are explanatory and not part of the mandatory requirements of this standard.1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：77.120.60 (Lead, zinc, tin and their alloys) CCS：G04 发布：2004 实施：

STAS 7406-1966 用于食品工业的硫化橡胶锌、铅、砷和钡含量的测定以及汞的检测
简介：
信息：ICS： CCS：发布：1967-02-01 实施：

SN/T 5104-2019 国境口岸饮用水中重金属(锌、镉、铅、铜、汞、砷)阳极溶出伏安检测方法
简介：
信息：ICS：13.060 CCS：C51 发布：2019-09-03 实施：2020-03-01

STAS SR ISO 8819-1996 液化石油气．硫化氢检测．乙酸铅发
简介：
信息：ICS： CCS：发布：1996-1-1 实施：

MSZ 9643-1958 油料，颜料和釉料粉末物质检测钢铁；铅；铝和锌检测
简介：
信息：ICS： CCS：发布：1958-01-01 实施：

LS/T 6136-2019 粮油检测大米中锰、铜、锌、铷、锶、镉、铅的测定快速提取-电感耦合等离子体质谱法
简介：
信息：ICS：67.06 CCS：X11 发布：2019-06-06 实施：2019-12-06

MSZ 2560/1-1989 交通工具铅蓄电池技术要求和检测方法
简介：
信息：ICS： CCS：发布：1989 实施：

MNOSZ 8667-1951 铅化学含量检测．锰含量检测
简介：
信息：ICS： CCS：发布：1951-01-01 实施：

DB22/T 395.1-2017 保健用品理化检测方法第1部分：铅的测定
简介：
信息：ICS：11.020 CCS：C 04 发布：2017-11-10 实施：2017-12-30

MSZ 15475-1981 脂肪的铅和钾含量检测
简介：
信息：ICS： CCS：发布：1981-01-01 实施：

JAP-111 铅检测方法
简介：无
信息：ICS： CCS：发布：实施：

DB 22/T 395.1-2017 保健用品理化检测方法第1部分：铅的测定
简介：本标准规定了保健用品中铅的石墨炉原子吸收光谱法和电感耦合等离子体质谱法。本标准适用于保健用品理化指标中铅含量的测定。
信息：ICS： CCS：发布：2017-11-10 实施：2017-12-30

MSZ KGST 1603-1979 铅电池组电动自行车和小型摩托车的工业要求和检测
简介：
信息：ICS： CCS：发布：1980-01-02 实施：

简介： 信息：

SN/T 1732.22-2018 烟花爆竹用烟火药剂第22部分：铅、铬、镉、汞和砷的定性检测能量色散型X射线荧光光谱法
简介：
信息：ICS： CCS：发布：2017-03-12 实施：2018-10-01

MSZ 3780/10-1971 工业炸药检测方式工作完成能力检测铅或铝柱中
简介：
信息：ICS： CCS：发布：1971 实施：

简介： 信息：

HJ 762-2015 铅水质自动在线监测仪技术要求及检测方法
简介：
信息：ICS： CCS：发布：2015-12-01 实施：2015-12-01

NEN 881-1970 对红铅颜料的要求与监检测方法
简介：De norm is van toepassing op het pigment loodmenie voor gebruik in verf. Er worden twee typen onderscheiden: non-setting loodmenieloodmenie met een hoge dispersiegraad De keuringsmethoden zijn vooral bedoeld voor arbitragegevallen.Zij hebben betrekking op het originele pigment en kunnen slechts onder voorbehoud worden toegepast op pigmenten, die uit combinaties met bindmiddelen zijn afgescheiden.
信息：ICS： CCS：发布：1970-10-1 实施：

简介： 信息：

HJ762-2015 铅水质自动在线监测仪技术要求及检测方法
简介：
信息：ICS：01.040.13 CCS：z 发布：2015-10-22 实施：2015-12-01

MSZ 8651/10.lap-1968 铅化学检测．锌和镍含量检测
简介：
信息：ICS： CCS：发布：1968 实施：

简介： 信息：

SN/T 4105-2015 进出口纺织品铬橙、铬酸铅、钼铬红的筛选检测方法
简介：本标准规定了纺织品中铬橙、铬酸铅、钼铬红的等离子体发射光谱仪筛选检测方法。本标准适用于各种纺织品中铬橙、铬酸铅、钼铬红的筛选检测(临界值1 000 mg/kg)。铅、铬、钼元素的检出限为10 mg/kg。
信息：ICS： CCS：发布：2015-05-26 实施：2016-01-01

MSZ 8651/1.lap-1968 铅化学检测一般标准
简介：
信息：ICS： CCS：发布：1968 实施：

简介： 信息：

SN/T 4127-2015 非充满溶液型日用陶瓷铅镉溶出量检测方法
简介：本标准规定了用于接触食物的非充满溶液型日用陶瓷制品的铅和镉溶出量的检测参考方法。本标准适用于与食品接触的日用陶瓷器皿。
信息：ICS： CCS：发布：2015-02-09 实施：2015-09-01

MSZ 8651/7.lap-1968 铅化学检测．锡和锑含量检测
简介：
信息：ICS： CCS：发布：1968 实施：

简介： 信息：

SN/T 3999-2014 REACH法规高关注物质中钴、砷、铬、钠、锡、铅、锌、硅、铝、钼、钾、锶、锆和钙的快速筛选检测方法波长色散X射线荧光光谱法
简介：
信息：ICS：71.040.40 CCS：G04 发布：2014-11-19 实施：2015-05-01

MSZ 8651/9.lap-1968 铅检测0.0005－0.10%含量检测
简介：
信息：ICS： CCS：发布：1968 实施：

简介： 信息：