水泥化学分析方法检测标准

发布时间：2023-03-06 16:05:50 • 阅读量： • 来源：中析研究所

水泥化学分析方法相关标准参考信息

GB/T 176-2017 水泥化学分析方法
简介：
信息：ICS： CCS：发布：2018-11-01 实施：2018-11-01

BS EN 196-2-2013 水泥的试验方法. 水泥的化学分析
简介：
信息：ICS：91.100.10 CCS：Q11 发布：2013-06-30 实施：2013-06-30

JC/T 850-2009 水泥用铁质原料化学分析方法
简介：本标准规定了配制水泥生料用铁质校正原料的化学分析方法。本标准中对二氧化硅、三氧化二铁、三氧化二铝和三氧化硫等四种化学成分的测定包含基准法和代用法两种方法，可根据实际情况任选。在有争议时，以基准法为准。本标准适用于水泥生产用铁矿石、硫酸渣等铁质校正原料的化学分析。
信息：ICS： CCS：Q12 发布：2009-12-04 实施：2010-06-01

GB/T 29422-2012 水泥化学分析废液的处理方法
简介：本标准规定了水泥化学分析废液中重金属钡、铬、汞、铜及废酸、废碱的处理方法。本标准适用于水泥化学分析中所排放的废墟。
信息：ICS：91.100.10 CCS：Q11 发布：2012-12-31 实施：2013-08-01

EN 196-2-2013 测试水泥的方法.第2部分:水泥的化学分析
简介：This European Standard specifies the methods for the chemical analysis of cement. This document describes the reference methods and, in certain cases, an alternative method which can be considered to be equivalent. In the case of a dispute, only the reference methods are used. An alternative performance-based method using X-ray fluorescence (XRF) is described for SiO2, Al2O3, Fe2O3, CaO, MgO, SO3, K2O, Na2O, TiO2, P2O5, Mn2O3, SrO, Cl and Br. When correctly calibrated according to the specified procedures and reference materials, it provides a method equivalent to the reference methods but has not been validated for use yet as a reference procedure for conformity and dispute purposes. It can be applied to other relevant elements when adequate calibrations have been established. This method is based on beads of fused sample and analytical validation using certified reference materials, together with performance criteria. A method based on pressed pellets of un-fused sample can be considered as equivalent, providing that the analytical performance satisfies the same criteria. Any other methods may be used provided they are calibrated, either against the reference methods or against internationally accepted reference materials, in order to demonstrate their equivalence. This document describes methods which apply principally to cements, but which can also be applied to their constituent materials. They can also be applied to other materials, the standards for which call up these methods. Standard specifications state which methods are to be used.
信息：ICS：91.100.10 CCS：Q11 发布：2013-06-01 实施：2013-06

ASTM C114-09a 水硬水泥化学分析的标准试验方法
简介：
信息：ICS：91.100.10 CCS：发布：2009-12-01 实施：

GB/T 28629-2012 水泥熟料中游离二氧化硅化学分析方法
简介：本标准规定了水泥熟料中游离二氧化硅化学分析方法。本标准适用于水泥熟料及指定采用本标准的其他材料。
信息：ICS：91.100.10 CCS：Q11 发布：2012-07-31 实施：2013-02-01

ASTM C114-2013 水硬水泥化学分析的标准试验方法
简介：1.1x00a0;These test methods cover the chemical analyses of hydraulic cements. Any test methods of demonstrated acceptable precision and bias may be used for analysis of hydraulic cements, including analyses for referee and certification purposes, as explained in Section 4. Specific chemical test methods are provided for ease of reference for those desiring to use them. They are grouped as Reference Test Methods and Alternative Test Methods. The reference test methods are long accepted classical chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements. The alternative test methods generally provide individual determination of specific analytes and may be used alone or as alternates and determinations within the basic scheme at the option of the analyst and as indicated in the individual method. 1.2x00a0;Contents: Section Subject 2 Referenced Documents 4 Description of Referee Analyses 4.1 Referee Analyses 5 Qualification for Different Analyses 5.1 Certified Reference Materials 5.2 Requirements for Qualification Testing 5.3 Alternative Analyses 5.4 Performance Requirements for Rapid Test Methods 6 General 6.1 Interferences and Limitations
信息：ICS：91.100.10 (Cement. Gypsum. Lime. Mortar) CCS：Q11 发布：2013 实施：

KS L 5222-2009(2019) 通过x射线荧光水泥的化学分析方法
简介：
信息：ICS：91.100.10 CCS：发布：2009-10-30 实施：

GB/T 176-2008 水泥化学分析方法
简介：本标准规定了水泥化学分析方法及X射线英冠分析方法。水泥化学分析分为基准法和代用法。在有争议时，以水泥化学方法的基准为准。本标准适用于通用硅酸盐水泥和制备上述水泥的熟料、生料及指定采用本标准的其他水泥和材料。
信息：ICS：91.100.10 CCS：Q11 发布：2008-06-30 实施：2009-04-01

ASTM C114-11be1 水硬水泥化学分析的标准试验方法
简介：
信息：ICS：91.100.10 CCS：发布：2011-08-01 实施：

ISO/TR 12389-2009 水泥试验方法.X射线荧光进行化学分析的试验程序报告
简介：This Technical Report describes the results of the inter-laboratory testing of the chemical analysis of cementby x-ray fluorescence. In the first instance, the inter-laboratory testing was carried out in Japan and in Asiancountries in accordance with JIS R 5204:2002. A total of 30 laboratories, 16 in Japan and 14 outside Japan,participated in the original testing programme. A further 12 European laboratories participated in tests with thesame materials in 2005 in accordance with EN 196-2, a development by CEN/TC 51/WG 15/TG 1 ofJIS R 5204. The latest version, developed as ISO 29581-2, is, as of the date of publication of this TechnicalReport, in the process of being circulated for technical enquiry.The test samples used were Portland cement conforming to CEM I of EN 197-1 and a mixture of Portlandcement and blast furnace slag. The mixture corresponded to the composition of Portland blast furnace slagcement, class B, specified in JIS R 5211 and CEM III/A of EN 197-1. Cement reference materials for x-rayfluorescence analysis (No. 601A) are used for the calibration standards, and certified reference materialsJCA-CRM-1 and JCA-CRM-2 are used as the validation materials.Constituents analysed include SiO2, Al2O3, Fe2O3, CaO, MgO, SO3, Na2O, K2O, TiO2, P2O5, MnO and SrO.The loss on ignition is also determined.The ISO round robin is a method-performance study conducted under close to optimum conditions with clearcalibration and measurement guidelines. This is conducive to producing “best practice” values representativeof the ideal situation. However, ISO 29581-2 is intended for use under everyday conditions in laboratories thatoperate to “good practice”. Annex D sets out the results of some international round robins carried out by alarge number of laboratories demonstrating the suitability of ISO 29581-2 as a means for comparing theeveryday performance of laboratories.
信息：ICS：91.100.10 CCS：Q11 发布：2009-05-01 实施：

GB/T 205-2008 铝酸盐水泥化学分析方法
简介：本标准规定了铝酸盐水泥的化学分析方法标准中只对铝酸盐水泥的烧失量的测定、不溶物的测定、全硫的测定、氧化钾和氧化钠的测定、氟离子的测定规定了基准法。而对二氧化硅的测定、三氧化二铁的测定、二氧化钛的测定、三氧化二铝的测定、氧化钙的测定、氧化镁的测定规定了基准法和代用法。本标准适用于铝酸盐水泥和适合采用本方法的其他铝酸盐类水泥以及指定采用本标准的其他材料。
信息：ICS：91.100.10 CCS：Q11 发布：2008-01-21 实施：2008-07-01

ASTM C114-11b 水硬水泥化学分析的标准试验方法
简介：
信息：ICS：91.100.10 CCS：发布：2011-08-01 实施：

ISO/TR 12389:2009 水泥的测试方法——测试计划报告——x射线荧光化学分析
简介：
信息：ICS：91.100.10 CCS：发布：2009-04-20 实施：

GB/T 205-2000 铝酸盐水泥化学分析方法
简介：本标准规定了铝酸盐水泥的化学分析方法的标准法和在一定条件下被认为能给出同等结果的代用法。本标准适用于铝酸盐水泥、硫铝酸盐水泥和适合采用本方法的其他铝酸盐类水泥以及制备上述水泥的熟料的化学分析方法。
信息：ICS：91.100.10 CCS：Q11 发布：2000-04-03 实施：2000-06-01

ASTM C114-11a 水硬水泥化学分析的标准试验方法
简介：
信息：ICS：91.100.10 CCS：发布：2011-04-01 实施：

ISO 29581-1:2009 水泥&粉煤灰；试验方法第1部分:湿化学分析
简介：
信息：ICS：91.100.10 CCS：发布：2009-03-04 实施：

GB/T 176-1996 水泥化学分析方法
简介：本标准规定了水泥化学分析方法的基准法和在一定条件下被认为能给出同等结果的代用法。在有争议时，以基准法为准。本标准适用于硅酸盐水泥、普通硅酸盐水泥、矿渣硅酸盐水泥、火山灰质硅酸盐水泥、粉煤灰硅酸盐水泥、复合硅酸盐水泥以及制备上述水泥的熟料和适合本标准方法的其他水泥。
信息：ICS：91.100.10 CCS：Q11 发布：1996-05-15 实施：1996-12-01

ASTM C114-11 水硬水泥化学分析的标准试验方法
简介：
信息：ICS：91.100.10 CCS：发布：2011-02-01 实施：

ISO 29581-1-2009 水泥.试验方法.第1部分:潮湿化学分析
简介：
信息：ICS： CCS：Q11 发布：2009-03 实施：

ASTM C114-22 水硬性水泥化学分析的标准试验方法
简介：
信息：ICS：91.100.10 CCS：发布：2022-12-15 实施：

ASTM C114-2011be1 水凝水泥化学分析的标准试验方法
简介：1.1x00a0;These test methods cover the chemical analyses of hydraulic cements. Any test methods of demonstrated acceptable precision and bias may be used for analysis of hydraulic cements, including analyses for referee and certification purposes, as explained in Section 4. Specific chemical test methods are provided for ease of reference for those desiring to use them. They are grouped as Reference Test Methods and Alternative Test Methods. The reference test methods are long accepted classical chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements. The alternative test methods generally provide individual determination of specific analytes and may be used alone or as alternates and determinations within the basic scheme at the option of the analyst and as indicated in the individual method. 1.2x00a0;Contents: Section Subject 2 Referenced Documents 4 Description of Referee Analyses 4.1 Referee Analyses 5 Qualification for Different Analyses 5.1 Certified Reference Materials 5.2 Requirements for Qualification Testing 5.3 Alternative Analyses 5.4 Performance Requirements for Rapid Test Methods
信息：ICS：91.100.10 (Cement. Gypsum. Lime. Mortar) CCS：Q11 发布：2011 实施：

ASTM C114-09 水硬水泥化学分析的标准试验方法
简介：
信息：ICS：91.100.10 CCS：发布：2009-02-01 实施：

JC/T 312-2021 明矾石膨胀水泥化学分析方法
简介：
信息：ICS：Q11 CCS：JC/T312-2009 发布：2021-03-05 实施：2021-07-01

ASTM C114-2011b 水凝水泥化学分析的标准试验方法
简介：1.1 These test methods cover the chemical analyses of hydraulic cements. Any test methods of demonstrated acceptable precision and bias may be used for analysis of hydraulic cements, including analyses for referee and certification purposes, as explained in Section 4. Specific chemical test methods are provided for ease of reference for those desiring to use them. They are grouped as Reference Test Methods and Alternative Test Methods. The reference test methods are long accepted classical chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements. The alternative test methods generally provide individual determination of specific analytes and may be used alone or as alternates and determinations within the basic scheme at the option of the analyst and as indicated in the individual method. 1.2 Contents: SectionSubject 2Referenced Documents 4Description of Referee Analyses 4.1Referee Analyses 5Qualification for Different Analyses 5.1Certified Reference Materials 5.2Requirements for Qualification Testing 5.3Alternative Analyses 5.4Performance Requirements for Rapid Test Methods 6General 6.1Interferences and Limitations 6.2Apparatus and Materials 6.3Reagents 6.4Sample Preparation 6.5General Procedures 6.6Recommended Order for Reporting Analyses Reference Test Methods 7Insoluble Residue 8Silicon Dioxide 8.2Cements with Insoluble Residue Less Than 1 % 8.3Cements with Insoluble Residue Greater Than 1 % 9Ammonium Hydroxide Group 10Ferric Oxide 11Phosphorus Pentoxide 12Titanium Dioxide 13Zinc Oxide 14Aluminum Oxide 15Calcium Oxide
信息：ICS：91.100.10 (Cement. Gypsum. Lime. Mortar) CCS：Q11 发布：2011 实施：

ASTM C114-2009 水凝水泥的化学分析用标准试验方法
简介：1.1 These test methods cover the chemical analyses of hydraulic cements. Any test methods of demonstrated acceptable precision and bias may be used for analysis of hydraulic cements, including analyses for referee and certification purposes, as explained in Section 3. Specific chemical test methods are provided for ease of reference for those desiring to use them. They are grouped as Reference Test Methods and Alternative Test Methods. The reference test methods are long accepted classical chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements. The alternative test methods generally provide individual determination of specific components and may be used alone or as alternates and determinations within the basic scheme at the option of the analyst and as indicated in the individual method. 1.2 Contents: SectionSubject 2Referenced Documents 3Number of Determinations and Permissible Variations 3.1Referee Analyses 3.2Optional Analyses 3.3Performance Requirements for Rapid Test Methods 3.4Precision and Bias 4General 4.1Interferences and Limitations 4.2Apparatus and Materials 4.3Reagents 4.4Sample Preparation 4.5General Procedures 4.6Recommended Order for Reporting Analyses Reference Test Methods 5Insoluble Residue 6Silicon Dioxide 6.2Cements with Insoluble Residue Less Than 1 % 6.3Cements with Insoluble Residue Greater Than 1 % 7Ammonium Hydroxide Group 8Ferric Oxide 9Phosphorus Pentoxide 10Titanium Dioxide 11Zinc Oxide 12Aluminum Oxide 13Calcium Oxide 14Magnesium Oxide 15Sulfur 15.1
信息：ICS：91.100.10 (Cement. Gypsum. Lime. Mortar) CCS：Q11 发布：2009 实施：

JC/T 850-2021 水泥用铁质原料化学分析方法
简介：
信息：ICS：Q11 CCS：JC/T 850-2009 发布：2021-03-05 实施：2021-07-01

ASTM C114-10a 水硬水泥化学分析的标准试验方法
简介：
信息：ICS：91.100.10 CCS：发布：2010-12-01 实施：

JC/T 1073-2008 水泥中氯离子的化学分析方法
简介：本标准规定了硫氰酸铵容量法（基准法）及磷酸蒸馏-汞盐滴定法（代用法）测定水泥中氯离子的化学分析方法。本标准适用于通用硅酸盐水泥及指定采用本标准的其它材料。
信息：ICS：91.100.10 CCS：Q11 发布：2008-02-01 实施：2008-07-01

JC/T 874-2021 水泥用硅质原料化学分析方法
简介：
信息：ICS：Q11 CCS：JC/T 874-2009 发布：2021-03-05 实施：2021-07-01

BS ISO 29581-2-2010 水泥.试验方法.用X射线荧光法的化学分析
简介：
信息：ICS：91.100.10 CCS：Q11 发布：2010-05-31 实施：2010-05-31

ASTM C114-07 水硬水泥化学分析的标准试验方法
简介：
信息：ICS：91.100.10 CCS：发布：2007-07-15 实施：

JIS R5204-2019 用X射线荧光法对水泥进行化学分析的方法
简介：
信息：ICS：71.040.50;91.100.10 CCS：Q13 发布：2019-03-20 实施：

ISO 29581-2-2010 水泥.试验方法.第2部分:用X射线荧光法的化学分析
简介：This part of ISO 29581 describes an alternative method for analyses of cement for conformity and informationpurposes, based on beads of fused sample and analytical validation using certified reference materials,together with performance criteria.A method based on pressed pellets of unfused sample can be considered as equivalent, providing that the analytical performance satisfies the same criteria.
信息：ICS：91.100.10 CCS：Q11 发布：2010-03 实施：

ASTM C114-2007 水硬水泥化学分析的标准试验方法
简介：1.1 These test methods cover the chemical analyses of hydraulic cements. Any test methods of demonstrated acceptable precision and bias may be used for analysis of hydraulic cements, including analyses for referee and certification purposes, as explained in Section3 . Specific chemical test methods are provided for ease of reference for those desiring to use them. They are grouped as Reference Test Methods and Alternative Test Methods. The reference test methods are long accepted classical chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements. The alternative test methods generally provide individual determination of specific components and may be used alone or as alternates and determinations within the basic scheme at the option of the analyst and as indicated in the individual method. 1.3 The values stated in SI units are to be regarded as the standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See 6.3.2.1 and 14.4.1 for specific caution statements.
信息：ICS：91.100.10 (Cement. Gypsum. Lime. Mortar) CCS：Q11 发布：2007 实施：

ASTM C114-18 水硬水泥化学分析的标准试验方法
简介：
信息：ICS：91.100.10 CCS：发布：2018-05-01 实施：

JIS R5202-2010 水泥的化学分析方法
简介：This Standard specifies the methods for the analysis of cement (portland cement specified in JIS R 5210, portland blast-furnace slag cement specified in JIS R 5211, portland pozzolan cement specified in JIS R 5212, portland fly-ash cement specified in JIS R 5213, and ecocement specified in JIS R 5214) by wet chemistry.
信息：ICS：91.100.10 CCS：Q11 发布：2010-02-22 实施：

ASTM C114-06 水硬水泥化学分析的标准试验方法
简介：
信息：ICS：91.100.10 CCS：发布：2006-11-01 实施：

ASTM C114-15 水硬水泥化学分析的标准试验方法
简介：
信息：ICS：91.100.10 CCS：发布：2015-04-15 实施：

ISO 29581-2:2010 水泥&粉煤灰；试验方法第2部分:X射线荧光化学分析
简介：
信息：ICS：91.100.10 CCS：发布：2010-02-18 实施：

ASTM C114-06e1 水硬水泥化学分析的标准试验方法
简介：
信息：ICS：91.100.10 CCS：发布：2006-11-01 实施：

JIS R5202 AMD 1-2015 水泥的化学分析方法(修改件1)
简介：
信息：ICS：91.100.10 CCS：Q11 发布：2015-03-20 实施：

ASTM C114-10 水硬水泥化学分析的标准试验方法
简介：
信息：ICS：91.100.10 CCS：发布：2010-02-01 实施：

SANS 50196-2-2006 水泥试验方法.第2部分:水泥化学分析
简介：Specifies the methods for the chemical analysis of cement. It also describes the reference methods and, in certain cases, an alternative method which can be considered to be equivalent. In the case of a dispute, however, only the reference methods are used.
信息：ICS：91.100.10 CCS：Q11 发布：2006-06-23 实施：

ASTM C114-2015 水硬性水泥的化学分析的标准试验方法
简介：1.1x00a0;These test methods cover the chemical analyses of hydraulic cements. Any test methods of demonstrated acceptable precision and bias may be used for analysis of hydraulic cements, including analyses for referee and certification purposes, as explained in Section 4. Specific chemical test methods are provided for ease of reference for those desiring to use them. They are grouped as Reference Test Methods and Alternative Test Methods. The reference test methods are long accepted classical chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements. The alternative test methods generally provide individual determination of specific analytes and may be used alone or as alternates and determinations within the basic scheme at the option of the analyst and as indicated in the individual method. 1.2x00a0;Contents:x00a0; Section Subject 2 Referenced Documents 4 Description of Referee Analyses 4.1 Referee Analyses 5 Qualification for Different Analyses 5.1 Certified Reference Materials 5.2 Requirements for Qualification Testing 5.3 Alternative Analyses 5.4 Performance Requirements for Rapid Test Methods 6
信息：ICS：91.100.10 CCS：发布：2015 实施：

ASTM C114-2010 水硬性水泥化学分析的标准试验方法
简介：1.1 These test methods cover the chemical analyses of hydraulic cements. Any test methods of demonstrated acceptable precision and bias may be used for analysis of hydraulic cements, including analyses for referee and certification purposes, as explained in Section 3. Specific chemical test methods are provided for ease of reference for those desiring to use them. They are grouped as Reference Test Methods and Alternative Test Methods. The reference test methods are long accepted classical chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements. The alternative test methods generally provide individual determination of specific analytes and may be used alone or as alternates and determinations within the basic scheme at the option of the analyst and as indicated in the individual method.
信息：ICS：91.100.10 (Cement. Gypsum. Lime. Mortar) CCS：Q11 发布：2010 实施：

NF P15-471-2-2006 水泥试验方法.第2部分:水泥的化学分析
简介：
信息：ICS：91.100.10 CCS：Q11 发布：2006-04-01 实施：2006-04-20

LST EN 196-2-2013 水泥的试验方法. 第2部分: 水泥的化学分析
简介：
信息：ICS：91.100.10 CCS：发布：2013-10-31 实施：2013-10-31

ASTM C114-2010a 水凝水泥化学分析的标准试验方法
简介：1.1 These test methods cover the chemical analyses of hydraulic cements. Any test methods of demonstrated acceptable precision and bias may be used for analysis of hydraulic cements, including analyses for referee and certification purposes, as explained in Section 3. Specific chemical test methods are provided for ease of reference for those desiring to use them. They are grouped as Reference Test Methods and Alternative Test Methods. The reference test methods are long accepted classical chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements. The alternative test methods generally provide individual determination of specific analytes and may be used alone or as alternates and determinations within the basic scheme at the option of the analyst and as indicated in the individual method.
信息：ICS：91.100.10 (Cement. Gypsum. Lime. Mortar) CCS：Q11 发布：2010 实施：

ASTM C114-2006 水硬水泥化学分析的标准试验方法
简介：1.1 These test methods cover the chemical analyses of hydraulic cements. Any test methods of demonstrated acceptable precision and bias may be used for analysis of hydraulic cements, including analyses for referee and certification purposes, as explained in Section 3. Specific chemical test methods are provided for ease of reference for those desiring to use them. They are grouped as Reference Test Methods and Alternative Test Methods. The reference test methods are long accepted classical chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements. The alternative test methods generally provide individual determination of specific components and may be used alone or as alternates and determinations within the basic scheme at the option of the analyst and as indicated in the individual method. 1.2 Contents: 1.3 The values stated in SI units are to be regarded as the standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See and for specific caution statements.
信息：ICS：91.100.10 (Cement. Gypsum. Lime. Mortar) CCS：Q11 发布：2006 实施：

ASTM C114-13 水硬水泥化学分析的标准试验方法
简介：
信息：ICS：91.100.10 CCS：发布：2013-10-01 实施：

ASTM C114-09b 水硬水泥化学分析的标准试验方法
简介：
信息：ICS：91.100.10 CCS：发布：2009-12-15 实施：

ASTM C114-2006e1 水硬水泥化学分析的标准试验方法
简介：1.1 These test methods cover the chemical analyses of hydraulic cements. Any test methods of demonstrated acceptable precision and bias may be used for analysis of hydraulic cements, including analyses for referee and certification purposes, as explained in Section 3. Specific chemical test methods are provided for ease of reference for those desiring to use them. They are grouped as Reference Test Methods and Alternative Test Methods. The reference test methods are long accepted classical chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements. The alternative test methods generally provide individual determination of specific components and may be used alone or as alternates and determinations within the basic scheme at the option of the analyst and as indicated in the individual method. 1.2 Contents: 1.3 The values stated in SI units are to be regarded as the standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See and for specific caution statements.
信息：ICS：91.100.10 (Cement. Gypsum. Lime. Mortar) CCS：Q11 发布：2006 实施：

DIN EN 196-2-2013 水泥的试验方法. 第2部分:水泥的化学分析; 德文版本EN 196-2-2013
简介：
信息：ICS：91.100.10 CCS：Q11 发布：2013-10 实施：

JC/T 312-2009 明矾石膨胀水泥化学分析方法
简介：本标准规定了明矾石膨胀水泥化学分析方法。本标准适用于明矾石膨胀水泥。
信息：ICS： CCS：Q11 发布：2009-12-04 实施：2010-06-01

BS EN 196-2-2005 测试水泥的方法.水泥的化学分析
简介：This document specifies the methods for the chemical analysis of cement.This document describes the reference methods and, in certain cases, an alternative method which can be considered to be equivalent. In the case of a dispute, only the reference methods are used.Any other methods may be used provided they are calibrated, either against the reference methods or against internationally accepted reference materials, in order to demonstrate their equivalence.This document describes methods which apply principally to cements, but which can also be applied to their constituent materials. They can also be applied to other materials, the standards for which call up these methods.Standard specifications state which methods are used.
信息：ICS：91.100.10 CCS：Q11 发布：2005-03-31 实施：2005-03-31

NF P15-471-2-2013 水泥的试验方法 - 第2部分: 水泥的化学分析
简介：
信息：ICS：91.100.10 CCS：Q11 发布：2013-09-07 实施：2013-09-07

EN 196-2-2005 测试水泥的方法.第2部分:水泥的化学分析;代替EN 196-21-1989
简介：This document specifies the methods forThe chemical analysis of cement.This document describesThe reference methods and, in certain cases, an alternative method which can beconsidered to be equivalent. InThe case of a dispute, onlyThe reference methods are used.Any other methods may be used providedThey are calibrated, either againstThe reference methods or againstinternationally accepted reference materials, in order to demonstrateTheir equivalence.This document describes methods which apply principally to cements, but which can also be applied toTheirconstituent materials.They can also be applied to other materials,The standards for which call upThesemethods.Standard specifications state which methods are used.
信息：ICS：91.100.10 CCS：发布：2005-02-01 实施：