二元磷酸钙检测标准二元磷酸钙-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

二元磷酸钙相关标准参考信息

GB/T 41672-2022 外科植入物骨诱导磷酸钙生物陶瓷
简介：
信息：ICS：11.040.40 CCS：C35 发布：2022-07-11 实施：2023-08-01

604药典四部-2015 药用辅料品名十七画磷酸钙
简介：无
信息：ICS： CCS：发布：2015-06-05 实施：2015-12-01

ASTM F1160-05(2011)e1 磷酸钙和金属医用复合磷酸钙/金属涂层的剪切和弯曲疲劳试验标准试验方法
简介：
信息：ICS：25.220.40 CCS：发布：2011-10-01 实施：

GB/T 22626-2008 水处理剂阻垢性能的测定.磷酸钙沉积法
简介：本标准规定了同类水处理剂抑制磷酸钙析出的阻垢的测定方法磷酸钙沉积法。本标准适用于同类水处理剂抑制磷酸钙析出的阻垢性能的测定。
信息：ICS：71.040.10 CCS：G76 发布：2008-12-23 实施：2009-09-01

GOST R ISO 13175-3-2015 外科植入物. 磷酸钙. 第3部分. 羟磷灰石和β-磷酸三钙骨替代品
简介：
信息：ICS：11.040 CCS：发布：2015 实施：2016-03-01

ASTM F1044-05(2011)e1 磷酸钙涂层和金属涂层剪切试验的标准试验方法
简介：
信息：ICS：25.220.40 CCS：发布：2011-10-01 实施：

ASTM F1926/F1926M-14(2021) 磷酸钙颗粒制造形式和涂层的溶出度测试的标准测试方法
简介：
信息：ICS：11.040.40 CCS：发布：2021-06-01 实施：

ASTM F1160-14 磷酸钙和金属医用复合磷酸钙/金属涂层的剪切和弯曲疲劳试验标准试验方法
简介：
信息：ICS：25.220.40 CCS：发布：2014-06-01 实施：

ASTM F1147-05(2011) 磷酸钙和金属涂层的拉伸试验的标准试验方法
简介：
信息：ICS：25.220.40 CCS：发布：2011-10-01 实施：

ABNT NBR 15664-7-2020 外科植入物 - 产品涂层第7部分：磷酸钙涂层的要求
简介：
信息：ICS：11.040.40 CCS：C35 发布：2020-11-18 实施：2020-11-18

ASTM F1926/F1926M-14 磷酸钙颗粒制造形式和涂层的溶出度测试的标准测试方法
简介：
信息：ICS：11.040.40 CCS：发布：2014-05-15 实施：

QB/T 4193-2011 牙膏用甘油磷酸钙
简介：本标准规定了牙膏用甘油磷酸钙的要求、试验方法、检验规则和标志、包装、运输、贮存、保质期。本标准适用于清洁及护理口腔的各种牙膏产品用甘油磷酸钙产品。
信息：ICS：71.100 CCS：Y43 发布：2011-06-15 实施：2011-10-01

440药典四部-2020 药用辅料品名五画甘油磷酸钙
简介：无
信息：ICS： CCS：发布：2020-06-24 实施：2020-12-30

ASTM F1609-08(2014) 用于植入材料的磷酸钙涂层的标准规范
简介：
信息：ICS：11.040.40 CCS：发布：2014-03-01 实施：

ABNT NBR 15664-3-2011 骨科植入物 - 产品涂层第3部分-测试确定剪切和弯曲的磷酸钙，金属和复合磷酸钙/金属涂层疲劳强度的方法
简介：This part of ABNT NBR 15664 establishes a procedure for determining the shear and bending fatigue performance of calcium phosphate coatings, porous and nonporous metallic coatings and for determining the bending fatigue performance of metallic coating oversprayed with calcium phosphate.
信息：ICS：11.040.40 CCS：发布：2011-04-07 实施：2011-05-07

694药典四部-2020 药用辅料品名十七画磷酸钙
简介：无
信息：ICS： CCS：发布：2020-06-24 实施：2020-12-30

ASTM F1160-2014 磷酸钙和医用金属与复合磷酸钙/金属涂层的剪切和弯曲疲劳试验的标准试验方法
简介：5.1x00a0;The shear and bending fatigue tests are used to determine the effect of variations in material, geometry, surface condition, stress, and so forth, on the fatigue resistance of coated metallic materials subjected to direct stress for up to 107 cycles. These tests may be used as a relative guide to the selection of coated materials for service under condition of repeated stress. 5.2x00a0;In order that such basic fatigue data be comparable, reproducible, and can be correlated among laboratories, it is essential that uniform fatigue practices be established. 5.3x00a0;The results of the fatigue test may be used for basic material property design. Actual components should not be tested using these test methods. 1.1x00a0;This test method covers the procedure for determining the shear and bending fatigue performance of calcium phosphate coatings and of porous and nonporous metallic coatings and for determining the bending fatigue performance of metallic coatings over sprayed with calcium phosphate. This test method has been established based on plasma-sprayed titanium and plasma-sprayed hydroxylapatite coatings. The efficacy of this test method for other coatings has not been established. In the shear fatigue mode, this test method evaluates the adhesive and cohesive properties of the coating on a metallic substrate. In the bending fatigue mode, this test method evaluates both the adhesion of the coating as well as the effects that the coating may have on the substrate material. These methods are limited to testing in air at ambient temperature. These test methods are not intended for application in fatigue tests of components or devices; however, the test method which most closely replicates the actual loading configuration is preferred. 1.2x00a0;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：25.220.40 (Metallic coatings) CCS：发布：2014 实施：

ASTM F1926/F1926M-2010 评定磷酸钙颗粒,成品外形,和敷层环境稳定性的标准试验方法
简介：1.1 This test method covers calcium phosphate materials intended for use in surgical implant applications. 1.2 Aspects of the biological response to calcium phosphate materials in soft tissue and bone have been reported from laboratory studies and clinical use (1-10). 1.3 The requirements of this specification apply to calcium phosphate materials such as calcium hydroxyapatite (see Specification F1185), beta-tricalcium phosphate (see Specification F1088), and biphasic mixtures thereof with or without intentional addition of other minor components (x003C;10 %). 1.4 The material(s) shall be representative of that produced for sale. It shall have been produced and processed under standard manufacturing conditions. 1.5 The materials may be in the form of powders, granules, fabricated forms or coatings; and may be porous, nonporous, textured, and other implantable topographical substrate form representative of the end-use product. 1.6 The calcium phosphate material may constitute the only material in a substrate or it may be one of multiple materials so long as all other materials present do not dissolve under the test conditions described in this test method. 1.7 This test method is limited to the laboratory evaluation of the dissolution rate of a calcium phosphate material. No correlation of the results to in vivo performance is implied. 1.8 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：11.040.40 CCS：A29 发布：2010 实施：

YY/T 1640-2018 外科植入物磷酸钙颗粒、制品和涂层溶解性的试验方法
简介：
信息：ICS：11.040.40 CCS：C35 发布：2018-12-20 实施：2020-01-01

ASTM F1926/F1926M-2014 磷酸钙颗粒, 制作模型和涂层的溶出试验的标准试验方法
简介：4.1x00a0;Aspects of the biological response to calcium phosphate materials in soft tissue and bone have been reported from laboratory studies and clinical use (1-11).3 4.2x00a0;The requirements of this test method apply to calcium phosphate materials such as calcium hydroxyapatite (see Specification F1185), beta-tricalcium phosphate (see Specification F1088), and biphasic mixtures thereof with or without intentional addition of other minor components (lt;10 %). 4.3x00a0;This test method is limited to the laboratory evaluation of the dissolution rate of a calcium phosphate material. No correlation of the results to in vivo performance is implied. Therefore, it is recommended that a control material be included in the evaluation. The control material can be a standardized material such as NIST SRM 2910 or a historical control. 1.1x00a0;This test method covers calcium phosphate materials intended for use in surgical implant applications. 1.2x00a0;The material(s) shall be representative of that produced for sale. It shall have been produced and processed under standard manufacturing conditions. 1.3x00a0;The materials may be in the form of powders, granules, spall material, fabricated forms or coatings; and may be porous, nonporous, textured, and other implantable topographical substrate form representative of the end-use product. 1.4x00a0;The calcium phosphate material may constitute the only material in a substrate or it may be one of multiple materials so long as all other materials present do not dissolve under the test conditions described in this test method. 1.5x00a0;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.6x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：11.040.40 (Implants for surgery, prothetics and or CCS：发布：2014 实施：

GOST R 53945-2010 食品添加剂.磷酸钙E341.通用规范
简介：
信息：ICS：67.220.20 CCS：发布：2010 实施：2012-01-01

KS P 7419-2018 牙科磷酸钙骨水泥
简介：
信息：ICS：11.060.10 CCS：发布：2018-11-05 实施：

BS ISO 13175-3-2013 外科植入物.磷酸钙.羟磷灰石和β-磷酸三钙骨骼替代品
简介：
信息：ICS：11.040.40 CCS：C45 发布：2013-04-30 实施：2013-04-30

ASTM F1926/F1926M-08 磷酸钙颗粒制造形式和涂料的环境稳定性评价标准测试方法
简介：
信息：ICS：11.040.40 CCS：发布：2008-10-01 实施：

ASTM F1160-14(2017)e1 磷酸钙和金属医用复合磷酸钙/金属涂层的剪切和弯曲疲劳试验标准试验方法
简介：
信息：ICS：25.220.40 CCS：发布：2017-12-01 实施：

BS ISO 13175-3-2013 外科植入物.磷酸钙.羟磷灰石和β-磷酸三钙骨骼替代品
简介：
信息：ICS：11.040.40 CCS：C45 发布：2013-04-30 实施：2013-04-30

ASTM F1926/F1926M-10 磷酸钙颗粒制造形式和涂料的环境稳定性评价标准测试方法
简介：
信息：ICS：11.040.40 CCS：发布：2008-10-01 实施：

ASTM F1044-05(2017)e1 磷酸钙涂层和金属涂层剪切试验的标准试验方法
简介：
信息：ICS：25.220.40 CCS：发布：2017-12-01 实施：

NF S94-073-3-2012 外科植入物.磷酸钙.第3部分:羟磷灰石和贝它磷酸三钙骨骼替代品
简介：
信息：ICS：11.040.40 CCS：C45 发布：2012-12-01 实施：2012-12-28

ASTM F1609-08 用于植入材料的磷酸钙涂层的标准规范
简介：
信息：ICS：11.040.40 CCS：发布：2008-05-01 实施：

HG/T 5214~5217-2017 工业次磷酸、硫酸铜、次磷酸钙和重铬酸铵(2017)
简介：
信息：ICS： CCS：G11 发布：2017-11-07 实施：2018-04-01

JIS T0330-3-2012 生物陶瓷.第3部分:磷酸钙陶瓷溶出速率的测量试验方法
简介：
信息：ICS：11.040.40 CCS：Q32 发布：2012-10-01 实施：

ASTM F1609-2008(2014) 可植入材料用磷酸钙涂层的标准规范
简介：1.1x00a0;This specification covers the material requirements for calcium phosphate coatings for surgical implant applications. 1.2x00a0;In particulate and monolithic form, the calcium phosphate materials system has been well-characterized regarding biological response (1,2)2 and laboratory characterization (2-4). Several publications (5-10) have documented the in vitro and in vivo properties of selected calcium phosphate coating systems. 1.3x00a0;This specification includes hydroxylapatite coatings, tricalcium phosphate coatings, or combinations thereof, with or without intentional minor additions of other ceramic or metallic,3 and applied by methods including, but not limited to, the following: (1) mechanical capture, (2) plasma spray deposition, (3) dipping/sintering, (4) electrophoretic deposition, (5) porcelainizing, and (6) sputtering. 1.4x00a0;Substrates may include smooth, porous, textured, and other implantable topographical forms. 1.5x00a0;This specification excludes organic coatings that may contain calcium and phosphate ionic species. 1.6x00a0;Warningx2014;Mercury has been designated by EPA and many state agencies as a hazardous material that can cause central nervous system, kidney, and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury-containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPAx2019;s website (http://www.epa.gov/mercury/faq.htm) for additional information. Users should be aware that selling mercury or mercury-containing products, or both, in your state may be prohibited by state law.
信息：ICS：11.040.40 (Implants for surgery, prothetics and or CCS：发布：2008 实施：

HG/T 5216-2017 工业次磷酸钙
简介：
信息：ICS：71.060.50 CCS：G12 发布：2017-11-07 实施：2018-04-01

ISO 13175-3:2012 外科植入物——磷酸钙第3部分:羟基磷灰石和β-磷酸三钙骨替代物
简介：
信息：ICS：11.040.40 CCS：发布：2012-10-01 实施：

ASTM F1609-2008 可植入材料用磷酸钙涂层的标准规范
简介：1.1 This specification covers the material requirements for calcium phosphate coatings for surgical implant applications. 1.2 In particulate and monolithic form, the calcium phosphate materials system has been well-characterized regarding biological response (1,2) and laboratory characterization (2-4). Several publications (5-10) have documented the in vitro and in vivo properties of selected calcium phosphate coating systems. 1.3 This specification includes hydroxylapatite coatings, tricalcium phosphate coatings, or combinations thereof, with or without intentional minor additions of other ceramic or metallic, and applied by methods including, but not limited to, the following: (1) mechanical capture, (2) plasma spray deposition, (3) dipping/sintering, (4) electrophoretic deposition, (5) porcelainizing, and (6) sputtering. 1.4 Substrates may include smooth, porous, textured, and other implantable topographical forms. 1.5 This specification excludes organic coatings that may contain calcium and phosphate ionic species. 1.6 Warningx2014;Mercury has been designated by EPA and many state agencies as a hazardous material that can cause central nervous system, kidney, and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury-containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPAx2019;s website (http://www.epa.gov/mercury/faq.htm) for additional information. Users should be aware that selling mercury or mercury-containing products, or both, in your state may be prohibited by state law.
信息：ICS：11.040.40 (Implants for surgery, prothetics and or CCS：A29 发布：2008 实施：

YY/T 1558.3-2017 外科植入物磷酸钙第3部分：羟基磷灰石和β-磷酸三钙骨替代物
简介：
信息：ICS：11.040.40 CCS：C35 发布：2017-09-25 实施：2018-10-01

JIS T0330-4-2012 生物陶瓷.第4部分:磷酸钙骨泥物理化学特性
简介：
信息：ICS：81.060.20 CCS：Q32 发布：2012-10-01 实施：

ASTM F1926/F1926M-2008 磷酸钙颗粒及其制品和涂料的环境稳定性评价的标准试验方法
简介：1.1 This test method covers calcium phosphate materials intended for use in surgical implant applications. 1.2 Aspects of the biological response to calcium phosphate materials in soft tissue and bone have been reported from laboratory studies and clinical use (1-10). 1.3 The requirements of this specification apply to calcium phosphate materials such as calcium hydroxyapatite (see Specification F 1185), beta-tricalcium phosphate (see Specification F 1088), and biphasic mixtures thereof with or without intentional addition of other minor components (x003C;10 %). 1.4 The material(s) shall be representative of that produced for sale. It shall have been produced and processed under standard manufacturing conditions. 1.5 The materials may be in the form of powders, granules, fabricated forms or coatings; and may be porous, nonporous, textured, and other implantable topographical substrate form representative of the end-use product. 1.6 The calcium phosphate material may constitute the only material in a substrate or it may be one of multiple materials so long as all other materials present do not dissolve under the test conditions described in this test method. 1.7 This test method is limited to the laboratory evaluation of the dissolution rate of a calcium phosphate material. No correlation of the results to in vivo performance is implied. 1.8 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：11.040.40 (Implants for surgery, prothetics and or CCS：发布：2008 实施：

ASTM F1147-05(2017)e1 磷酸钙和金属涂层的拉伸试验的标准试验方法
简介：
信息：ICS：25.220.40 CCS：发布：2017-05-01 实施：

JIS T0330-2-2012 生物陶瓷.第2部分:多孔磷酸钙生物陶瓷机械强度用试验方法
简介：
信息：ICS：81.060.20 CCS：Q32 发布：2012-10-01 实施：

GOST R 52641-2006 手术用植入件.磷酸钙涂层与金属涂层抗剪测试的标准测试方法
简介：
信息：ICS：11.040.40 CCS：发布：2006 实施：2008-01-01

541兽药典一部-2015 正文品种第二部分五画甘油磷酸钙
简介：无
信息：ICS： CCS：发布：2016-08-23 实施：2016-11-15

JIS T0330-1-2012 生物陶瓷.第1部分:多孔磷酸钙生物陶瓷气孔分析
简介：
信息：ICS：81.060.20 CCS：Q32 发布：2012-10-01 实施：

ASTM F1160-05 磷酸钙和金属医用复合磷酸钙/金属涂层的剪切和弯曲疲劳试验标准试验方法
简介：
信息：ICS：25.220.40 CCS：发布：2005-04-01 实施：

746兽药典一部-2015 正文品种第二部分十五画及以上磷酸钙
简介：无
信息：ICS： CCS：发布：2016-08-23 实施：2016-11-15

JIS T0330-3-2012 生物陶瓷.第3部分:磷酸钙陶瓷溶出速率的测量试验方法
简介：
信息：ICS：11.040.40 CCS：Q32 发布：2012-10-01 实施：

ASTM F1147-05 磷酸钙和金属涂层拉伸试验的标准试验方法
简介：
信息：ICS：25.220.40 CCS：发布：2005-04-01 实施：

YY/T 0988.11-2016 外科植入物涂层第11部分:磷酸钙涂层和金属涂层拉伸试验方法
简介：YY/T 0988的本部分规定了在室温条件下覆盖在致密金属基体上的磷酸钙涂层和金属多孔涂层的拉伸试验方法。本部分用于评价在拉伸形式下(垂直于粘结平面方向上)涂层对基体的粘结程度或涂层内部的结合程度。本部分采用国际单位制(SI)。本部分并非试图对所涉及的所有安全问题进行阐述，即便是那些与其使用有关的安全问题。确立适当的安全及健康规范，以及在应用前明确管理限制的适用性，是本部分用户自身的责任。
信息：ICS：11.040.40 CCS：C35 发布：2016-03-23 实施：2017-01-01

JIS T0330-2-2012 生物陶瓷.第2部分:多孔磷酸钙生物陶瓷机械强度用试验方法
简介：
信息：ICS：81.060.20 CCS：Q32 发布：2012-10-01 实施：

ASTM F1044-05 磷酸钙涂层和金属涂层剪切试验的标准试验方法
简介：
信息：ICS：25.220.40 CCS：发布：2005-04-01 实施：

YY/T 0988.12-2016 外科植入物涂层.第12部分:磷酸钙涂层和金属涂层剪切试验方法
简介：YY/T 0988的本部分规定了在室温条件下粘结在致密金属基体上的连续磷酸钙涂层和金属涂层的剪切试验方法。本部分用于评价在剪切形式下（平行于粘结平面方向上）涂层对基体的粘结程度或内部结合程度。本部分采用国际单位制（SI）。本部分并非试图对所涉及到的所有安全问题进行阐述，即便是那些与其使用有关的安全问题。确立适当的安全及健康规范，以及在应用前明确管理限制的适用性，是本部分的使用者自身的责任。
信息：ICS：11.040.40 CCS：C35 发布：2016-03-23 实施：2017-01-01

ISO 13175-3-2012 外科植入物.磷酸钙.第3部分:羟磷灰石和β-磷酸三钙骨骼代用品
简介：
信息：ICS：11.040.40 CCS：C45 发布：2012-10 实施：

ASTM F1044-2005 磷酸钙覆层和金属覆层剪切试验的标准试验方法
简介：The shear test method is recommended for shear testing of calcium phosphate and metallic/substrate combinations and can provide information on the adhesive or cohesive strength of coatings under a uniaxial shear stress. The test method may be useful for comparative evaluation of adhesive or cohesive strengths of a variety of types of coatings. Information developed using this test method may be useful for certain quality control and design purposes. The test method should not be considered to provide an intrinsic values for utilization directly in making calculations such as determining the ability of a coating to withstand specified environmental stresses. Processing variables, such as substrate preparation prior to coating, surface texture, coating technique variables or post-coating heat treatment, or heat may introduce a significant effect on the results of the shear test. The specimen being evaluated must be representative of the actual end-use coating.1.1 This test method covers shear testing of continuous calcium phosphate coatings and metallic coatings adhering to dense metal substrates at ambient temperatures. It assesses the degree of adhesion of coatings to substrates, or the internal cohesion of a coating in shear, parallel to the surface plane.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：25.220.40 (Metallic coatings) CCS：A29 发布：2005 实施：

YY/T 0988.13-2016 外科植入物涂层.第13部分:磷酸钙、金属和磷酸钙/金属复合涂层剪切和弯曲疲劳试验方法
简介：YY/T 0988的本部分包含了确定磷酸钙涂层、多孔和非多孔金属涂层剪切和弯曲疲劳性能的试验方法，也包含了确定覆盖有磷酸钙的金属涂层弯曲疲劳性能的试验方法。本部分是基于等离子喷涂的钛涂层和等离子喷涂羟基磷灰石涂层所建立。本部分尚未建立对于其他涂层的效果。在剪切疲劳模式下本试验方法评价了覆盖金属基体上涂层的粘结性和结合性。在弯曲疲劳模式下本部分评价了涂层的粘结性以及涂层对基体材料的影响。这些试验方法仅在室温下空气中进行。
信息：ICS：11.040.40 CCS：C35 发布：2016-03-23 实施：2017-01-01

GOST 31615-2012 外科植入物.磷酸钙涂层和金属涂层剪切试验的标准试验方法
简介：
信息：ICS：11.040.40 CCS：发布：2012 实施：2015-01-01

ASTM F1044-2005(2011)e1 磷酸钙覆层和金属覆层剪切试验的标准试验方法
简介：The shear test method is recommended for shear testing of calcium phosphate and metallic/substrate combinations and can provide information on the adhesive or cohesive strength of coatings under a uniaxial shear stress. The test method may be useful for comparative evaluation of adhesive or cohesive strengths of a variety of types of coatings. Information developed using this test method may be useful for certain quality control and design purposes. The test method should not be considered to provide an intrinsic values for utilization directly in making calculations such as determining the ability of a coating to withstand specified environmental stresses. Processing variables, such as substrate preparation prior to coating, surface texture, coating technique variables or post-coating heat treatment, or heat may introduce a significant effect on the results of the shear test. The specimen being evaluated must be representative of the actual end-use coating.1.1 This test method covers shear testing of continuous calcium phosphate coatings and metallic coatings adhering to dense metal substrates at ambient temperatures. It assesses the degree of adhesion of coatings to substrates, or the internal cohesion of a coating in shear, parallel to the surface plane. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：25.220.40 CCS：A29 发布：2005 实施：

604药典四部-2015 药用辅料品名十七画磷酸钙
简介：无
信息：ICS： CCS：发布：2015-06-05 实施：2015-12-01

GOST 32007-2012 食品添加剂.磷酸钙E341.通用规格
简介：
信息：ICS：67.220.20 CCS：发布：2012 实施：2014-01-01

ASTM F1147-2005(2011) 磷酸钙及金属涂料张力试验的标准试验方法
简介：The tensile test method is recommended for tension testing of calcium phosphate/substrate or porous metal coating/substrate combinations and can provide information on the adhesive or cohesive strength of coatings under (uniaxial) tensile stress. The test method may be useful for comparative evaluation of adhesive or cohesive strengths of a variety of types of coatings. Coatings may be applied using a variety of methods, including but not limited to plasma-spraying and sintering. Information developed using this test method may be useful for certain quality control and design purposes. The test should not be considered to provide an intrinsic value for utilization directly in making calculations such as determining the ability of a coating to withstand specified environmental stresses. Processing variables such as substrate preparation prior to coating, surface texture, coating technique variables or postcoating heat treatment variables may introduce a significant effect on the results of the tension test. The specimen being evaluated must be representative of the actual end use coating.1.1 This test method covers tension testing of calcium phosphate and metallic porous coatings adhering to dense metal substrates at ambient temperatures. It assesses the degree of adhesion of coatings to substrates, or the internal cohesion of a coating in tension normal to the surface plane. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：25.220.40 (Metallic coatings) CCS：G50 发布：2005 实施：