(CMA)
(CNAS)
(ISO)
(高新技术企业)
塑料内应力开裂相关标准参考信息
GB/T 32682-2016 塑料 聚乙烯环境应力开裂(ESC)的测定 全缺口蠕变试验(FNCT)
简介：
信息：ICS： CCS： 发布： 实施：2017-01-01
KS M 3818-2011 测定塑料环境应力开裂（ESC）（球或销浸渍法）
简介：
信息：ICS：83.080.01 CCS： 发布：2011-12-23 实施：
ASTM D3929-03 使用弯曲方法评价粘合剂塑料应力开裂的标准试验方法
简介：
信息：ICS：83.080.01 CCS： 发布：2003-04-10 实施：
GB/T 1842-2008 塑料 聚乙烯环境应力开裂试验方法
简介：1.1 本标准规定了聚乙烯环境应力开裂的试验方法。1.2 本标准适用于测定聚乙烯均聚物以及其他 -烯烃单体含量少于 50% (质量分数)和带功能团的非烯烃单体含量不多于 3%%(质量分数)?的共聚物在规定条件下耐环境应力开裂的能力。
信息：ICS： CCS：G31 发布： 实施：2009-04-01
ASTM D3929-03(2010)e1 使用弯曲方法评价粘合剂塑料应力开裂的标准试验方法
简介：
信息：ICS：83.080.01 CCS： 发布：2010-04-01 实施：
ASTM D3929-2003(2015) 采用使用弯曲梁法的粘合剂评估塑料应力开裂的标准试验方法
简介：5.1x00a0;This test method is designed for obtaining a qualitative estimate of the compatibility of plastics and adhesives. Due to the many process variables associated with the fabrication of plastic parts, it is not possible to use this test as a substitute for compatibility tests on actual parts. 5.2x00a0;The detection of cracks or crazes may be determined with or without optical aid. Make comparisons only among tests employing crack detection methods of equivalent sensitivity. 1.1x00a0;This test method describes a procedure for determining the compatibility of adhesives with plastics based on whether the adhesive causes cracking of stressed samples. 1.2x00a0;Specimen configurations and test fixture designs are given. 1.3x00a0;This test method is suitable for products in the form of sheet or strip. It can also be used on injection molded tensile specimens or flexural bars. 1.4x00a0;The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.080.01;83.180 CCS： 发布：2003 实施：
ASTM F791-18(2023) 透明塑料应力开裂的标准试验方法
简介：
信息：ICS：83.080.01 CCS： 发布：2023-01-01 实施：
ASTM D5419-09 螺纹塑料封闭件的环境应力开裂性（ESCR）的标准试验方法
简介：
信息：ICS：83.080.20 CCS： 发布：2009-11-15 实施：
ASTM D3929-2003(2010)e1 通过使用粘合剂和弯曲梁法测定塑料应力开裂的标准试验方法
简介：This test method is designed for obtaining a qualitative estimate of the compatibility of plastics and adhesives. Due to the many process variables associated with the fabrication of plastic parts, it is not possible to use this test as a substitute for compatibility tests on actual parts. The detection of cracks or crazes may be determined with or without optical aid. Make comparisons only among tests employing crack detection methods of equivalent sensitivity.1.1 This test method describes a procedure for determining the compatibility of adhesives with plastics based on whether the adhesive causes cracking of stressed samples. 1.2 Specimen configurations and test fixture designs are given. 1.3 This test method is suitable for products in the form of sheet or strip. It can also be used on injection molded tensile specimens or flexural bars. 1.4 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.180 (Adhesives) CCS：G31 发布：2003 实施：
ASTM D5571-22 额定容量不超过60Gal（227L）的塑料密封头卷筒耐环境应力开裂性（ESCR）的标准试验方法
简介：
信息：ICS：55.140 CCS： 发布：2022-10-01 实施：
DIN EN ISO 22088-6-2009 塑料.耐环境应力开裂(ESC)能力的测定.第6部分:慢应变速率法(ISO 22088-6:2006),德文版本EN ISO 22088-6:2009
简介：This part of ISO 22088 describes a procedure for assessing the environmental stress cracking (ESC)susceptibility of polymeric materials in chemical environments by slowly increasing the strain applied to atensile specimen at a constant rate.It is applicable to test specimens prepared by moulding and/or machining and can be used to assess therelative ESC susceptibility of a material exposed to different environments or the relative ESC susceptibility ofdifferent plastics exposed to a specific environment.This is essentially a ranking test and is not intended for the provision of design data.The principle advantage of the test compared with the test methods described in Parts 2 to 5 of ISO 22088 isthe rapidity with which the ESC susceptibility of a particular polymer/environment combination can beassessed
信息：ICS：83.080.01 CCS：G31 发布：2009-10-01 实施：
ASTM F484-02 与液体或半液体化合物接触的丙烯酸塑料应力开裂的标准试验方法
简介：
信息：ICS：83.080.10 CCS： 发布：2002-05-10 实施：
ASTM D1975-21 塑料注射成型开口桶耐环境应力开裂的标准试验方法
简介：
信息：ICS：83.140.99 CCS： 发布：2021-11-01 实施：
DIN EN ISO 22088-5-2009 塑料.耐环境应力开裂(ESC)能力的测定.第5部分:恒定拉伸变形法(ISO 22088-5:2006),ISO 2208-5:2009的德文版本
简介：This part of ISO 22088 specifies a method for the determination of the environmental stress cracking (ESC)behaviour of thermoplastics when they are subjected to a constant tensile deformation in the presence of achemical medium.It is applicable to test specimens prepared by moulding and/or machining and can be used for the assessmentof the ESC behaviour of plastic materials exposed to different environments, as well as for the determinationof the ESC behaviour of different plastic materials exposed to a specific environment.This is essentially a ranking test and is not intended to provide data to be used for design or performanceprediction.NOTE Alternative methods for the determination of environmental stress cracking by means of a constant-strain testare specified in ISO 22088-3 and ISO 22088-4. A method for the determination of environmental stress cracking by meansof a constant tensile load is specified in ISO 22088-2.
信息：ICS：83.080.01 CCS：G31 发布：2009-10-01 实施：
ASTM D1693-00 乙烯塑料环境应力开裂标准试验方法
简介：
信息：ICS：83.080.20 CCS： 发布：2001-06-10 实施：
ASTM D1693-21 乙烯塑料环境应力开裂的标准试验方法
简介：
信息：ICS：83.080.20 CCS： 发布：2021-10-01 实施：
NF T51-170-5-2009 塑料.耐应力开裂性测定(ESC).第5部分:恒定拉伸变形法
简介：
信息：ICS：83.080.01 CCS：G31 发布：2009-09-01 实施：2009-09-19
ASTM D1693-01 乙烯塑料环境应力开裂标准试验方法
简介：
信息：ICS：83.080.20 CCS： 发布：2001-06-10 实施：
ISO 16770-2019 塑料 - 聚乙烯的环境应力开裂（ESC）测定 - 全刻度蠕变试验（FNCT） - 第1部分:标准方法
简介：
信息：ICS：83.080.20 CCS： 发布：2019-09-25 实施：
BS EN ISO 22088-6-2009 塑料.耐环境应力开裂(ESC)的测定.第6部分:慢应变速率测定法(ISO 22088-6-2006)
简介：This part of ISO 22088 describes a procedure for assessing the environmental stress cracking (ESC)susceptibility of polymeric materials in chemical environments by slowly increasing the strain applied to atensile specimen at a constant rate.It is applicable to test specimens prepared by moulding and/or machining and can be used to assess therelative ESC susceptibility of a material exposed to different environments or the relative ESC susceptibility ofdifferent plastics exposed to a specific environment.This is essentially a ranking test and is not intended for the provision of design data.The principle advantage of the test compared with the test methods described in Parts 2 to 5 of ISO 22088 isthe rapidity with which the ESC susceptibility of a particular polymer/environment combination can beassessed.
信息：ICS：83.080.01 CCS：G31 发布：2009-08-31 实施：2009-08-31
FORD FLTM BO 158-03-2001 塑料部件在承受机械应力的条件的化学应力开裂耐受性的测定;替代FLTM EU-BO 058-03［替代: FORD FLTM EU-BO 058-03］
简介：
信息：ICS： CCS： 发布：2001-04-02 实施：
ASTM F791-18 透明塑料应力开裂的标准试验方法
简介：
信息：ICS：83.080.01 CCS： 发布：2018-06-01 实施：
BS EN ISO 22088-5-2009 塑料.耐环境应力开裂(ESC).恒定拉伸变形方法
简介：This part of ISO 22088 specifies a method for the determination of the environmental stress cracking (ESC) behaviour of thermoplastics when they are subjected to a constant tensile deformation in the presence of a chemical medium.It is applicable to test specimens prepared by moulding and/or machining and can be used for the assessment of the ESC behaviour of plastic materials exposed to different environments, as well as for the determination of the ESC behaviour of different plastic materials exposed to a specific environment.This is essentially a ranking test and is not intended to provide data to be used for design or performance prediction.
信息：ICS：83.080.01 CCS：G31 发布：2009-07-31 实施：2009-07-31
ASTM F484-83(1998)e1 与液体或半液体化合物接触的丙烯酸塑料应力开裂的标准试验方法
简介：
信息：ICS：83.080.10 CCS： 发布：1999-07-21 实施：
ASTM D5571-2016 额定容量不超过60加仑(227 L) 的塑料闭口桶的环境应力开裂耐性 (ESCR) 标准试验方法
简介：5.1x00a0;These procedures provide an indication of the environmental stress-crack resistance of plastic tighthead drums. This test method may be used for determining the applicability of various plastic resins, mold designs, processing techniques and parameters for plastic tighthead drums. 5.2x00a0;Environmental stress cracking is indicative of what results when a container is exposed to chemical agents such as soaps, organics, bleaches, or any surface active solutions while under conditions of stress. 5.3x00a0;Environmental stress cracking is a mechanism of chemical attack that is highly dependent upon the test reagent, resin, container manufacturing or processing history, exposure temperature, applied stress and other factors. The combination of these factors may result in eventual stress crack failure. 5.4x00a0;Both procedures minimize the potential for test variability by providing the user with rigidly defined test conditions. This test method may be used as design qualification and auditing tools for plastic tighthead drums. 5.5x00a0;This test method is not meant to provide a quantitative value of measurement (that is, number of days to failure). It is intended only as a pass/fail procedure in accordance with user's specifications, or as agreed upon between the user and supplier. It is not intended as a predictor or indicator of field performance regarding time to failure. 1.1x00a0;This test method provides an indication of the environmental stress crack resistance of plastic tighthead drums as a summation of the effects of container design, resin, manufacturing conditions, field performance, and other factors. 1.2x00a0;This test method may be used to evaluate a plastic drum's resistance to failure by cracking when in the presence of chemical and physical stresses. 1.3x00a0;Two procedures are provided as follows: 1.3.1x00a0;Procedure Ax2014;Internal pressure stress crack resistance method to nonyl phenoxypoly (ethyleneoxy) ethanol solution, a stress cracking reagent. The internal pressure is controlled at a constant elevated pressure and temperature. 1.3.2x00a0;Procedure Bx2014;Top-load stress crack resistance method to nonyl phenoxypoly ethanol, a stress cracking reagent. The compressive top load is controlled at a constant weight while maintaining an elevated temperature. 1.4x00a0;Although these procedures are not designed to test the ability of the closure or closure gasket material to retain the test reagent, the inclusion of closure failure as a container failure mode is optional. However, leakage through a closure may affect the internal pressure that could affect the test results. 1.5x00a0;This test method does not attempt to address all factors that could lead to stress cracking of plastic drums.......
信息：ICS：55.140 CCS： 发布：2016 实施：
EN ISO 22088-6-2009 塑料.耐环境应力开裂(ESC)能力的测定.第6部分:慢应变速率法
简介：This part of ISO 22088 describes a procedure for assessing the environmental stress cracking (ESC) susceptibility of polymeric materials in chemical environments by slowly increasing the strain applied to a tensile specimen at a constant rate.
信息：ICS：83.080.01 CCS： 发布：2009-06-01 实施：
ASTM D3929-96e1 使用弯曲方法评价粘合剂塑料应力开裂的标准试验方法
简介：
信息：ICS：83.080.01 CCS： 发布：1997-06-02 实施：
ASTM D1975-2016 塑料注塑模制开口桶的环境应力开裂耐性标准试验方法
简介：5.1x00a0;These procedures provide an indication of the environmental stress-crack resistance of injection molded open head pails, covers, and components from a selected group or lot. Provided the thermal history of each container is constant, this test method may be used for determining the applicability of various plastic resins and mold designs for injection molding of open head pails and covers. 5.2x00a0;The environmental stress-crack that occurs is indicative of what results when a container is exposed to agents such as soaps, organics, or any surface active solutions while under environmental conditions of stress. 5.3x00a0;Environmental stress-cracking is a mechanism of chemical attack that is highly dependent upon the test reagent, resin, container manufacturing or processing history, exposure temperature, applied stress, and other factors. The combination of these factors may result in eventual stress-crack failure. 5.4x00a0;Procedure A minimizes the potential for test variability by providing the user with rigidly defined test conditions. This test method may be used for production quality control of injection molded open head containers. 5.5x00a0;Procedure B allows the user to select and evaluate extreme individual elements or the interaction of several test levels on container performance. These conditions are established based on laboratory experience and available knowledge of the distribution environment. This test method may be used for identifying critical stresses which could aid in container design or help in minimizing the occurrence of these stresses during distribution. 5.6x00a0;This test method is intended only as a pass/fail procedure in accordance with the user's specification, or as agreed upon between the user and the supplier. It is not intended as a predictor or indicator of field performance regarding time to failure. 1.1x00a0;This test method provides procedures for an indication of the environmental stress crack resistance of plastic injection molded open head pails, covers, and components as a summation of the effects of container design, resin, manufacturing conditions, field performance, and other factors. 1.2x00a0;This test method may be used to evaluate a container's resistance to mechanical failure by cracking when in the presence of chemical and physical stresses. 1.3x00a0;Two procedures are provided as follows: 1.3.1x00a0;Procedure A, Specified Stress-Crack Resistance Test Methodx2014;This procedure is particularly useful for quality control since the conditions of the test are specified. 1.3.2x00a0;Procedure B, User Selected Stress-Crack Resistance Test Methodx2014;This procedure allows individual selection of test levels and is particularly useful as a design and development tool.
信息：ICS：83.140.99 CCS： 发布：2016 实施：
EN ISO 22088-5-2009 塑料.耐环境应力开裂(ESC)能力的测定.第5部分:恒定拉伸变形法
简介：This part of ISO 22088 specifies a method for the determination of the environmental stress cracking (ESC) behaviour of thermoplastics when they are subjected to a constant tensile deformation in the presence of a chemical medium. It is applicable to test specimens prepared by moulding and/or machining and can be used for the assessment of the ESC behaviour of plastic materials exposed to different environments, as well as for the determination of the ESC behaviour of different plastic materials exposed to a specific environment. This is essentially a ranking test and is not intended to provide data to be used for design or performance prediction.
信息：ICS：83.080.01 CCS： 发布：2009-06-01 实施：
ASTM F791-96(2002) 透明塑料应力开裂的标准试验方法
简介：
信息：ICS：83.080.01 CCS： 发布：1996-10-10 实施：
ASTM D3929-03(2015) 使用弯曲方法评价粘合剂塑料应力开裂的标准试验方法
简介：
信息：ICS：83.080.01 CCS： 发布：2015-09-01 实施：
ASTM F484-08 与液体或半液体化合物接触的丙烯酸塑料应力开裂的标准试验方法
简介：
信息：ICS：83.080.10 CCS： 发布：2008-04-01 实施：
ASTM F791-96(2002)e1 透明塑料应力开裂的标准试验方法
简介：
信息：ICS：83.080.01 CCS： 发布：1996-10-10 实施：
ASTM D1693-15e1 乙烯塑料环境应力开裂标准试验方法
简介：
信息：ICS：83.080.20 CCS： 发布：2015-05-01 实施：
ASTM F791-96(2008) 透明塑料应力开裂的标准试验方法
简介：
信息：ICS：83.080.01 CCS： 发布：2008-04-01 实施：
ASTM F791-96 透明塑料应力开裂的标准试验方法
简介：
信息：ICS： CCS： 发布：1996-01-01 实施：
ASTM D1693-15 乙烯塑料环境应力开裂标准试验方法
简介：
信息：ICS：83.080.20 CCS： 发布：2015-05-01 实施：
ASTM D1693-08 乙烯塑料环境应力开裂标准试验方法
简介：
信息：ICS：83.080.20 CCS： 发布：2008-03-01 实施：
ASTM D5419-95 螺纹塑料封闭件的环境应力开裂性（ESCR）的标准试验方法
简介：
信息：ICS：83.080.20 CCS： 发布：1995-01-01 实施：
ASTM D5419-14a 螺纹塑料封闭件的环境应力开裂性（ESCR）的标准试验方法
简介：
信息：ICS：83.080.20 CCS： 发布：2014-12-01 实施：
ASTM D1693-07a 乙烯塑料环境应力开裂标准试验方法
简介：
信息：ICS：83.080.20 CCS： 发布：2007-11-01 实施：
ISO 4600:1992 塑料.环境应力开裂（ESC）的测定.球或销压痕法
简介：
信息：ICS：83.080.01 CCS： 发布：1992-08-20 实施：
ASTM D5419-14 螺纹塑料封闭件的环境应力开裂性（ESCR）的标准试验方法
简介：
信息：ICS：83.080.20 CCS： 发布：2014-11-15 实施：
ASTM D1693-07 乙烯塑料环境应力开裂标准试验方法
简介：
信息：ICS：83.080.20 CCS： 发布：2007-03-01 实施：
ISO 6252:1992 塑料.环境应力开裂（ESC）的测定.恒定拉伸应力法
简介：
信息：ICS：83.080.01 CCS： 发布：1992-08-12 实施：
ASTM D5419-2014a 螺纹塑料围护结构抗环境应力开裂 (ESCR) 的标准试验方法
简介：5.1x00a0;This test method compares closures for ESCR. Suitable variables are: closure materials, closure designs, processes, applied torque, and stress-crack agents. 5.2x00a0;Results can be used for estimating shelf life of closures in terms of ESCR. This requires that the user has calibrated failure time in this test to failure time in the field for actual packaging systems. 1.1x00a0;This test method determines the susceptibility of threaded plastic closures to failure due to environmental stress cracking (ESC). 1.2x00a0;In use, threaded plastic closures can contact agents that appreciably reduce the stress at which cracks form. Examples of such agents are: soaps, detergents, oils, and liquid bleaches. 1.3x00a0;Major factors that influence environmental stress crack resistance (ESCR) of threaded plastic closures include the closure material(s), closure design, molded-in stress, and applied stress. 1.4x00a0;This procedure can be applied to all closures, but is particularly applicable to closures made from plastics based on polypropylene (PP) or polystyrene (PS). 1.5x00a0;The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.6x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 8 and 6.2. Note 1:x00a0;There is no known ISO equivalent to this standard.
信息：ICS： CCS： 发布：2014 实施：
ISO 22088-6-2006 塑料.耐环境应力开裂(ESC)的测定.第6部分:慢应变率方法
简介：This part of ISO 22088 describes a procedure for assessing the environmental stress cracking (ESC)susceptibility of polymeric materials in chemical environments by slowly increasing the strain applied to atensile specimen at a constant rate.It is applicable to test specimens prepared by moulding and/or machining and can be used to assess therelative ESC susceptibility of a material exposed to different environments or the relative ESC susceptibility ofdifferent plastics exposed to a specific environment.This is essentially a ranking test and is not intended for the provision of design data.The principle advantage of the test compared with the test methods described in Parts 2 to 5 of ISO 22088 isthe rapidity with which the ESC susceptibility of a particular polymer/environment combination can be assessed.
信息：ICS：83.080.01 CCS：G31 发布：2006-08 实施：
BS 2782-11 Method 1109A-1989 塑料试验方法.第11部分:热塑性塑料、接头和阀门.试验方法1109A:非承压聚乙烯管和接头耐坏境应力开裂性
简介：Method for immersion of samples of pipe or fittings in a surfactant solution at elevated temperature followed by inspection for delamination to indicate inadequacy in the material composition, product design or manufacturing process.
信息：ICS：23.040.20;23.040.45 CCS：G33;G31 发布：1989-10-31 实施：1989-10-31
ASTM F484-08(2013) 与液体或半液体化合物接触的丙烯酸塑料应力开裂的标准试验方法
简介：
信息：ICS：83.080.10 CCS： 发布：2013-12-01 实施：
ISO 22088-5-2006 塑料.耐环境应力开裂(ESC)的测定.第5部分:恒定拉伸变形方法
简介：This part of ISO 22088 specifies a method for the determination of the environmental stress cracking (ESC)behaviour of thermoplastics when they are subjected to a constant tensile deformation in the presence of achemical medium.It is applicable to test specimens prepared by moulding and/or machining and can be used for the assessmentof the ESC behaviour of plastic materials exposed to different environments, as well as for the determinationof the ESC behaviour of different plastic materials exposed to a specific environment.This is essentially a ranking test and is not intended to provide data to be used for design or performanceprediction.NOTE Alternative methods for the determination of environmental stress cracking by means of a constant-strain testare specified in ISO 22088-3 and ISO 22088-4. A method for the determination of environmental stress cracking by meansof a constant tensile load is specified in ISO 22088-2.
信息：ICS：83.080.01 CCS：G31 发布：2006-08 实施：
ISO 4599:1986 塑料.耐环境应力开裂（ESC）的测定.弯曲条法
简介：
信息：ICS：83.080.01 CCS： 发布：1986-04-17 实施：
ASTM F791-96(2013) 透明塑料应力开裂的标准试验方法
简介：
信息：ICS：83.080.01 CCS： 发布：2013-12-01 实施：
FORD FLTM BO 127-03-2006 塑料的应力开裂试验
简介：
信息：ICS： CCS： 发布：2006-06-21 实施：
JUS G.S2.625-1982 塑料．环境应力开裂性的测定（ESC）．球状压痕或销钉压痕法
简介：
信息：ICS： CCS： 发布：1982-01-01 实施：
ASTM D1693-13 乙烯塑料环境应力开裂标准试验方法
简介：
信息：ICS：83.080.20 CCS： 发布：2013-04-01 实施：
ASTM D1693-05 乙烯塑料环境应力开裂标准试验方法
简介：
信息：ICS：83.080.20 CCS： 发布：2005-08-15 实施：
JUS G.S2.624-1982 塑料．环境应力开裂（ESC）性测定．恒定拉伸应力法
简介：
信息：ICS： CCS： 发布：1982-01-01 实施：
ASTM D1693-12 乙烯塑料环境应力开裂标准试验方法
简介：
信息：ICS：83.080.20 CCS： 发布：2012-04-01 实施：
ASTM D5419-95(2003) 螺纹塑料封闭件的环境应力开裂性（ESCR）的标准试验方法
简介：
信息：ICS：83.080.20 CCS： 发布：2003-07-10 实施：
ISO 6252-1981 塑料.环境应力开裂（ESC）的测定.恒定拉伸应力法
简介：
信息：ICS：83.080.01 CCS： 发布：1981-12-01 实施：
我们的实力
部分实验仪器
合作客户
注意：因业务调整，暂不接受个人委托测试望见谅。
