橡胶分析检测标准橡胶分析-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

橡胶分析相关标准参考信息

GB/T 12833-2006 橡胶和塑料撕裂强度和粘合强度测定中的多峰曲线分析
简介：本标准规定了在对硫化橡胶和塑料进行撕裂强度试验；或对橡胶与橡胶、覆有橡胶（或塑料）的织物与橡胶（或塑料）以及对覆有橡胶（或塑料）的织物与织物进行粘合强度试验后，计算其撕裂强度和粘合强度时的 5 种方法。对在试验中得到的力 - 时间曲线计算其峰值的中值和极距值，即为试验结果。粘合强度和撕裂强度曲线上的峰值可能很多，也可能很少（依所试验材料而定），需根据峰值的个数来选择计算方法。制定本标准的目的是获得评价和描述一个试验结果时的一致性，其只有在其他标准规定了某性能的试验方法或规范时本标准才有用。关于试验的其他事项，如试验设备、试样制备、试样状态调节、试验程序等，请参阅有关的国家标准。
信息：ICS：83.060;83.080.01 CCS：G40 发布：2006-09-01 实施：2007-02-01

ASTM D4572-89(2017) 橡胶化学品的标准试验方法&x2014；硫的湿筛分析
简介：
信息：ICS：83.060 CCS：发布：2017-02-01 实施：

KS M 6600-2009(2020) 为原料的天然橡胶的分析方法
简介：
信息：ICS：83.060 CCS：发布：2009-06-05 实施：

GB/T 5009.66-2003 橡胶奶嘴卫生标准的分析方法
简介：本标准规定了以天然橡胶为主要原料，配以一定助剂加工制成的不同类型奶嘴的各项卫生指标的分析方法。本标准适用于以天然橡胶为主要原料，按特定配方，配以一定助剂，加工制成的不同类型的为婴儿、老弱者哺乳吸饮用的奶嘴各项卫生指标的分析。
信息：ICS：67.040 CCS：C53 发布：2003-08-11 实施：2004-01-01

ISO 9924-2:2016 橡胶和橡胶制品 - 通过热重分析测定硫化橡胶和未固化的化合物的组成 - 第2部分:丙烯腈 - 丁二烯和卤代丁基橡胶
简介：
信息：ICS：83.060 CCS：发布：2016-07-18 实施：

ASTM D6370-99(2009) 用热重分析法（TGA）进行橡胶成分分析的标准试验方法
简介：
信息：ICS：83.040.20 CCS：发布：2009-01-01 实施：

GB/T 5009.64-2003 食品用橡胶垫片(圈)卫生标准的分析方法
简介：本标准规定了以天然橡胶为主要原料配以一定助剂加工制成的食品用橡胶垫片（圈）的各项卫生指标的分析方法。本标准适用于以天然橡胶为主要原料，按特定配方，配以一定助剂加工制成的，用于瓶装各种果汁饮料、酒、调味品及罐头食品密封的垫片、垫圈等的各项卫生指标的分析。
信息：ICS：67.040 CCS：C53 发布：2003-08-11 实施：2004-01-01

ASTM D3156-96(2016) 橡胶标准操作规程&x2014；抗降解剂（抗氧化剂、抗臭氧剂和稳定剂）的色谱分析
简介：
信息：ICS：83.040.20 CCS：发布：2016-06-01 实施：

KS M ISO 7270-1-2007(2022) 橡胶－热解气相色谱法分析－第1部分:聚合物（单体聚合物和聚合物共混物）的鉴定
简介：
信息：ICS：83.060 CCS：发布：2007-09-28 实施：

GB/T 12833-1991 橡胶和塑料撕裂强度及粘合强度多峰曲线的分析方法
简介：本标准规定了三种方法，用以确定以多峰曲线表明的硫化橡胶和覆有橡胶、塑料的织物的撕裂强度或粘合强度，以峰值的中位数和极差表示。本标准适用于多峰曲线的分析。不同材料的撕裂强度或粘合强度的曲线，其峰的数量不同，根据峰的多少，决定采用三种方法的某一种进行计算。对曲线平坦或无峰图形的分析，不在本标准范围内。本标准不涉及撕裂强度或粘合强度试验中的条件及方法等内容。
信息：ICS：83.060 CCS：G40 发布：1991-04-25 实施：1992-04-01

BS ISO 6133-2015 橡胶和塑料制品.测定撕裂强度和粘合强度获得的多峰值图形分析
简介：
信息：ICS：83.060;83.080.01 CCS：G30 发布：2015-08-31 实施：2015-08-31

KS M ISO 7270-1-2007(2017) 橡胶热解气相色谱法分析第1部分:聚合物（单一聚合物和聚合物共混物）的鉴定
简介：
信息：ICS：83.060 CCS：发布：2007-09-28 实施：

ASTM D5461-06(2021) 橡胶复合材料的标准试验方法粉末橡胶复合材料的湿筛分析
简介：
信息：ICS：83.040.20 CCS：发布：2021-11-01 实施：

JIS K6274-2006 橡胶和塑料.测定撕裂强度和粘合强度时获得的多峰值曲线的分析
简介：この規格は，加硫ゴム又は布で，ゴム若しくはプラスチックで被覆されたもの又はゴム若しくはプラスチックに接着したものについて，引裂強さ及び接着強さを求めるための五つの方法について規定する。接着力のグラフのピーク値の中央値及び範囲を読み取って結果を計算する。引裂試験における引裂力又は接着試験における接着力の記録された波状曲線は，試験した材料によって少数又は多数のピークを示す。計算方法の選択は，彼状曲線のビークの数による ()。この規格の目的は，試験結果の評価及び表記方法をより統一するためのものであり，ほかの規格の中で規定された場合にだけ適用する。試験装置，試験片の採取・作製，状態調節，試験方法など他の詳細な要求事項は，適用する関連規格による。
信息：ICS：83.060;83.080.01 CCS：G30 发布：2006-12-20 实施：2006-12-20

ASTM D4572-21 橡胶化学品硫的湿筛分析的标准试验方法
简介：
信息：ICS：83.060 CCS：发布：2021-11-01 实施：

ISO 6133:2015 橡胶和塑料 - 撕裂强度和粘合强度测定中获得的多峰迹迹分析
简介：
信息：ICS：83.060 CCS：发布：2015-08-13 实施：

ASTM D4075-06 橡胶复合材料的标准试验方法&8212；火焰原子吸收分析&8212；金属的测定
简介：
信息：ICS：83.040.20 CCS：发布：2006-10-01 实施：

ASTM D4075-06(2021) 橡胶复合材料的标准试验方法金属的火焰原子吸收分析测定
简介：
信息：ICS：83.040.20 CCS：发布：2021-11-01 实施：

ISO 6133-2015 橡胶和塑料.测定撕裂强度和粘合强度所获得的多峰图形的分析
简介：
信息：ICS：83.060;83.080.01 CCS：G40 发布：2015-08 实施：

ASTM D5461-06 橡胶复合材料的标准试验方法&8212；粉末橡胶复合材料的湿筛分析
简介：
信息：ICS：83.040.20 CCS：发布：2006-10-01 实施：

ASTM D3156-96(2021) 抗降解剂（抗氧化剂、抗臭氧剂和稳定剂）的橡胶色谱分析的标准实施规程
简介：
信息：ICS：83.040.20 CCS：发布：2021-11-01 实施：

ASTM D5712-15 使用修正的Lowry方法分析胶乳天然橡胶和弹性体产品中的水提取物蛋白质的标准测试方法
简介：
信息：ICS：83.040.10 CCS：发布：2015-07-01 实施：

ASTM D5051-2006(2012) 橡胶配料的标准试验方法.二硫化苯并噻唑(MBTS).分析
简介：The test method is designed to assess the purity of MBTS, which is used for rubber and latex vulcanization acceleration. The amount of MBTS is of importance in predicting performance in rubber compounds and for raw material purchase and control. This test method may be used as a quality control tool and for research and development work.1.1 This test method covers the determination of assay of benzothiazyl disulfide (MBTS). It is based on a titration of free iodine liberated upon reduction of MBTS, with potassium iodide (KI) in acid medium. 1.2 The assay is determined as mass percent. 1.3 Free 2-mercaptobenzothiazole (MBT) content is not determined. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.060 (Rubber) CCS：G34 发布：2006 实施：

ASTM D5712-15(2020) 使用修正的Lowry方法分析胶乳天然橡胶和弹性体产品中的水提取物蛋白质的标准测试方法
简介：
信息：ICS：83.040.10 CCS：发布：2020-06-01 实施：

ASTM D5712-2015 采用改性劳里法分析乳胶, 天然橡胶和弹性产品中水溶性蛋白质的标准试验方法
简介：5.1x00a0;This test method, for the determination of protein levels in latex, is primarily intended to test NR, latex, and elastomeric materials for residual protein content. It is assumed that all who use this test method will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory. 1.1x00a0;This test method covers an analytical test for determining the amount of total aqueous extractable protein associated with NR, latex, and elastomeric products. Water soluble proteins are extracted in a buffer solution and then precipitated to concentrate them and also to separate them from water soluble substances that may interfere with the determination. The extracted protein is redissolved and quantified colorimetrically by the modified Lowry method using a protein standard. 1.2x00a0;For the purpose of this test method, the range of protein measurement will be based on the limit of detection and quantitation and recorded in micrograms per dm2 test specimen. 1.3x00a0;The test method is designed to be accurate and compatible with the industrial environment. 1.4x00a0;Steps are included in this test method to minimize the effects of interfering substances. 1.5x00a0;It is recognized that other methods for the analysis of leachable proteins exist and these may be used for routine quality control purposes provided they have been validated and a correlation established against the reference method specified by this test method. 1.6x00a0;This test method has not been validated for use with lubricated products such as condoms. Condoms with different lubricants as typically marketed, have not been tested in an ASTM ILS to determine if, and if so to what degree, the lubricant interferes with the assay. 1.7x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.040.10 CCS：发布：2015 实施：

ASTM D5461-2006(2017) 橡胶复合材料的标准试验方法&x2014;粉末橡胶复合材料的湿筛分析
简介：4.1x00a0;This test method is used to evaluate the suitability of powdered rubber chemicals, particularly accelerators, for use in rubber compounds that require very small particle clusters to achieve a uniform cross-linked network. This test method is intended to be used to ensure that no excessively large particles are present that would result in network x201c;flawsx201d; and to determine that the powdered product follows a typical pattern of size distribution. 4.2x00a0;In view of the inherent variability in this type of method, it is recommended that the results be used only in a semi-quantitative sense; that is, comparisons within a laboratory or relative comparisons of samples against reference samples, or both. 1.1x00a0;This test method covers a procedure for the qualitative evaluation of aggregate size and aggregate size distribution of powdered rubber accelerators and other compounding materials which are insoluble in water. 1.2x00a0;The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4x00a0;This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
信息：ICS：83.040.20 CCS：G34 发布：2006 实施：

ISO 7270-1-2020 橡胶 - 通过热解气相色谱法分析 - 第1部分:聚合物（单聚合物和聚合物共混物）的鉴定
简介：
信息：ICS：83.060 CCS：发布：2020-02-11 实施：

KS M ISO 248-2-2014(2019) 橡胶原料 - 挥发物含量的测定 - 第2部分:使用带有红外干燥装置的自动分析仪的热重分析方法
简介：
信息：ICS：83.040.10 CCS：发布：2014-09-02 实施：

ASTM D5051-2006(2017) 橡胶材料二硫化二苯并噻唑(MBTS)分析的标准试验方法
简介：4.1x00a0;The test method is designed to assess the purity of MBTS, which is used for rubber and latex vulcanization acceleration. The amount of MBTS is of importance in predicting performance in rubber compounds and for raw material purchase and control. 4.2x00a0;This test method may be used as a quality control tool and for research and development work. 1.1x00a0;This test method covers the determination of assay of benzothiazyl disulfide (MBTS). It is based on a titration of free iodine liberated upon reduction of MBTS, with potassium iodide (KI) in acid medium. 1.2x00a0;The assay is determined as mass percent. 1.3x00a0;Free 2-mercaptobenzothiazole (MBT) content is not determined. 1.4x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.6x00a0;This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
信息：ICS：83.060 CCS：G34 发布：2006 实施：

ISO 248-2-2019 橡胶原料 - 挥发物含量的测定 - 第2部分:使用带有红外干燥装置的自动分析仪的热重分析方法
简介：
信息：ICS：83.040.10 CCS：发布：2019-03-26 实施：

ASTM D6370-99(2014) 橡胶的标准试验方法&mdash；通过热重分析（TGA）进行成分分析
简介：
信息：ICS：83.040.20 CCS：发布：2014-08-01 实施：

ASTM D3156-96(2005) 橡胶的标准操作规程&8212；抗降解剂（抗氧化剂、抗臭氧剂和稳定剂）的色谱分析
简介：
信息：ICS：83.040.20 CCS：发布：2005-12-01 实施：

ASTM D6370-99(2019) 橡胶的标准试验方法&x2014；通过热重分析（TGA）进行成分分析
简介：
信息：ICS：83.040.20 CCS：发布：2019-01-01 实施：

ISO 13507:2012 橡胶化合物、原橡胶和复合材料——分析证书中报告的属性的简称
简介：
信息：ICS：83.060 CCS：发布：2012-11-08 实施：

NF T46-055-2005 橡胶和塑料.测定撕裂强度和粘合强度所获得的多峰图形的分析
简介：
信息：ICS：83.060;83.080.01 CCS：G34 发布：2005-09-01 实施：2005-09-20

ISO 247-2:2018 橡胶 - 灰分测定 - 第2部分:热重分析（TGA）
简介：
信息：ICS：83.060 CCS：发布：2018-07-25 实施：

BS ISO 7270-2-2012 橡胶. 采用热解气相色谱法的分析苯乙烯/丁二烯/异戊二烯比率的测定
简介：
信息：ICS：83.060 CCS：G40 发布：2012-10-31 实施：2012-10-31

ASTM D5712-05 用改进的Lowry法分析天然橡胶及其制品中可水提取蛋白质的标准试验方法
简介：
信息：ICS：83.040.10 CCS：发布：2005-05-15 实施：

ISO 247-2-2018 橡胶.灰分的测定.第2部分:热重量分析(TGA)
简介：
信息：ICS：83.060 CCS：G40 发布：2018-0701 实施：

ISO 7270-2:2012 橡胶——热解气相色谱法分析第2部分:苯乙烯/丁二烯/异戊二烯比率的测定
简介：
信息：ICS：83.060 CCS：发布：2012-09-13 实施：

ASTM D5712-05e1 用改进的Lowry法分析天然橡胶及其制品中可水提取蛋白质的标准试验方法
简介：
信息：ICS：83.040.10 CCS：发布：2005-05-15 实施：

JIS K6274-2018 橡胶和塑料.测定撕裂强度和粘合强度时获得的多峰值曲线的分析
简介：
信息：ICS：83.060;83.080.01 CCS：G30 发布：2018-02-20 实施：

ASTM D5461-06(2012) 橡胶复合材料的标准试验方法&mdash；粉末橡胶复合材料的湿筛分析
简介：
信息：ICS：83.040.20 CCS：发布：2012-05-01 实施：

ASTM D4572-89(2005) 橡胶化学品标准试验方法 - 硫磺湿法分析
简介：
信息：ICS：83.060 CCS：发布：2005-05-01 实施：

KS M ISO 7270-2-2017(2022) 橡胶.热解气相色谱法分析.第2部分:苯乙烯/丁二烯/异戊二烯比率的测定
简介：
信息：ICS：83.060 CCS：发布：2017-12-29 实施：

ASTM D4572-89(2012) 橡胶化学品的标准试验方法&mdash；硫的湿筛分析
简介：
信息：ICS：83.060 CCS：发布：2012-05-01 实施：

ISO 7270-2:2005 橡胶.热解气相色谱法分析.第2部分:苯乙烯/丁二烯/异戊二烯比率的测定
简介：
信息：ICS：83.060 CCS：发布：2005-03-21 实施：

ISO 6179-2017 橡胶硫化或热塑性橡胶板和橡胶涂层织物 - 挥发性液体透过率的测定（重量分析技术）
简介：
信息：ICS：83.140.10 CCS：发布：2017-07-31 实施：

ASTM D3156-96(2011) 橡胶标准操作规程&mdash；抗降解剂（抗氧化剂、抗臭氧剂和稳定剂）的色谱分析
简介：
信息：ICS：83.040.20 CCS：发布：2011-11-01 实施：

ASTM D5712-2005e1 用改进半空细胞法分析天然橡胶及其制品中水可萃取蛋白质的标准试验方法
简介：This test method, for the determination of protein levels in NR, is primarily intended to test NR materials for residual protein content. It is assumed that all who use this test method will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory.1.1 This test method covers an analytical test for determining the amount of total aqueous extractable protein associated with natural rubber (NR) and its products. Water soluble proteins are extracted in a buffer solution and then precipitated to concentrate them and also to separate them from water soluble substances that may interfere with the determination. The extracted protein is redissolved and quantified colorimetrically by the modified Lowry method using a protein standard.1.2 For the purpose of this test method, the range of protein measurement will be based on the limit of detection and quantitation and recorded in micrograms per dm2 NR specimen.1.3 The test method is designed to be accurate and compatible with the industrial environment.1.4 Steps are included in this test method to minimize the effects of interfering substances.1.5 It is recognized that other methods for the analysis of leachable proteins exist and these may be used for routine quality control purposes provided they have been validated and a correlation established against the reference method specified by this test method.1.6 The values stated inSI units are to be regarded as the standard. No other units of measurement are included in this standard.1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.040.10 (Latex and raw rubber) CCS：G40 发布：2005 实施：

ASTM D5461-06(2017) 橡胶复合材料的标准试验方法&x2014；粉末橡胶复合材料的湿筛分析
简介：
信息：ICS：83.040.20 CCS：发布：2017-05-01 实施：

ISO 7270-1-2003/Amd 1-2010 橡胶.热解气相色谱法分析.第1部分:聚合物（单一聚合物和聚合物混合物）的识别.修改件1
简介：
信息：ICS：83.060 CCS：发布：2010-07-05 实施：

ASTM D5712-2005 用改进半空细胞法分析天然橡胶及其制品中水可萃取蛋白质的标准试验方法
简介：1.1 This test method covers an analytical test for determining the amount of total aqueous extractable protein associated with natural rubber (NR) and its products. Water soluble proteins are extracted in a buffer solution and then precipitated to concentrate them and also to separate them from water soluble substances that may interfere with the determination. The extracted protein is redissolved and quantified colorimetrically by the modified Lowry method using a protein standard.1.2 For the purpose of this test method, the range of protein measurement will be based on the limit of detection and quantitation and recorded in micrograms per dm2 NR specimen.1.3 The test method is designed to be accurate and compatible with the industrial environment.1.4 Steps are included in this test method to minimize the effects of interfering substances.1.5 It is recognized that other methods for the analysis of leachable proteins exist and these may be used for routine quality control purposes provided they have been validated and a correlation established against the reference method specified by this test method.1.6 The values stated inSI units are to be regarded as the standard. No other units of measurement are included in this standard.1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.040.10 (Latex and raw rubber) CCS：G40 发布：2005 实施：

ASTM D4075-06(2017) 橡胶复合材料的标准试验方法&x2014；火焰原子吸收分析&x2014；金属的测定
简介：
信息：ICS：83.040.20 CCS：发布：2017-05-01 实施：

ASTM D5712-10 用改进的Lowry法分析天然橡胶及其制品中可水提取蛋白质的标准试验方法
简介：
信息：ICS：83.040.10 CCS：发布：2010-06-01 实施：

BS 903-5-2004 橡胶的物理试验.有限元素分析的橡胶试验的应用指南
简介：This part of BS 903 gives recommendations for test procedures and guidance on appropriate methods for determining model parameters from test data for use in finite element analysis (FEA) of rubber. It covers stress—strain characterization, mechanical failure, friction, thermal properties and heat build-up.It is applicable to solid vulcanized rubbers of hardness 20 to 80 IRHD for which the deformation is predominantly elastic, and to cellular materials formed using such rubbers. It might prove useful for other materials which can be deformed elastically to large strain.
信息：ICS：83.060 CCS：G34 发布：2004-08-02 实施：2004-08-02

DIN ISO 6133-2017 橡胶和塑料.测定撕裂强度和粘合强度所获得的多峰图形的分析(ISO 6133-2015)
简介：
信息：ICS：83.060;83.080.01 CCS：G34 发布：2017-04 实施：

ASTM D6844-2010 橡胶配方(双-(三乙氧甲硅烷丙基)硫烷)中使用的硅烷的标准试验方法:高效液相色谱法(HPLC)分析
简介：The average sulfur chain length is an important parameter in determining the behavior of the silane in a rubber mixture.1.1 This test method covers the characterization of silanes, or of admixtures of silane and carbon black (see 10.4), of the type bis-(triethoxysilylpropyl)sulfane by high performance liquid chromatography. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：71.040.50 (Physicochemical methods of analysis) CCS：G34 发布：2010 实施：

DIN ISO 6133-2004 橡胶和塑料.测定撕裂强度和粘合强度所获得的多峰图形的分析
简介：
信息：ICS：83.060;83.080.01 CCS：G34;G31 发布：2004-05 实施：