铜腐蚀性检测标准

铜腐蚀性检测标准相关信息

ASTM D130-19 用铜带试验测定石油产品对铜腐蚀性的标准试验方法
简介：
信息：ICS：77.060 CCS： 发布：2019-05-01 实施：

NF T76-156-1-2011 结构胶粘剂.腐蚀性.第1部分:铜基材腐蚀性测定和分类.
简介：
信息：ICS：77.060;83.180 CCS：G38 发布：2011-07-01 实施：2011-07-29

EN 1965-1-2001 结构胶粘剂.腐蚀性.第1部分:对铜衬底腐蚀性的测定和分类;代替ENV 1965-1-1995
简介：
信息：ICS： CCS： 发布：2001-04-01 实施：

ASTM D130-18 用铜带试验测定石油产品对铜腐蚀性的标准试验方法
简介：
信息：ICS：77.060 CCS： 发布：2018-04-01 实施：

BS EN 1965-1-2011 结构胶粘剂.腐蚀.铜衬底腐蚀性测定和分类
简介：This European Standard describes a method to determine the ability of a liquid adhesive to corrode a coppersubstrate under heat ageing conditions. Temperatures and ageing periods are chosen to ensure the maximumdifferentiation between the corrosivity of different adhesives and are not intended to represent any particularservice condition.
信息：ICS：77.060;83.180 CCS：G38 发布：2011-06-30 实施：2011-06-30

JIS K2513-2000 石油产品.对铜的腐蚀性.铜带试验
简介：この規格は，JIS K 2258によって測定した蒸気圧が124 kPa以下の石油製品の銅に対する腐食性を試験する方法について規定する。ただし，芳香族製品，グリース類及び電気絶縁油には適用しない。
信息：ICS：77.060;77.150.30 CCS：E30 发布：2000-11-20 实施：

ASTM A690/A690M-13a(2018) 用于海洋环境的具有耐大气腐蚀性的高强度低合金镍 铜 磷钢H桩和板桩的标准规范
简介：
信息：ICS：93.140 CCS： 发布：2018-03-01 实施：

ASTM D1838-2011 以液化石油气(LP)确定铜条腐蚀性的标准试验方法
简介：Copper corrosion limits provide assurance that difficulties will not be experienced in deterioration of the copper and copper-alloy fittings and connections that are commonly used in many types of utilization, storage, and transportation equipment.1.1 This test method covers the detection of the presence of components in liquefied petroleum gases which may be corrosive to copper. For an equivalent copper strip test applicable to less volatile petroleum products, see Test Method D 130.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 6.1, 9.3.1, and Annex A1.
信息：ICS：77.060 (Corrosion of metals) CCS：E46 发布：2011 实施：

NF M07-098-2000 柴油燃料乳状液中的水.对铜的腐蚀性.铜带试验
简介：
信息：ICS：75.160.20 CCS：E30 发布：2000-10-01 实施：2000-10-05

ASTM D130-2018 用铜带试验测定石油产品对铜腐蚀性的标准试验方法
简介： 5.1x00a0;Crude petroleum contains sulfur compounds, most of which are removed during refining. However, of the sulfur compounds remaining in the petroleum product, some can have a corroding action on various metals and this corrosivity is not necessarily related directly to the total sulfur content. The effect can vary according to the chemical types of sulfur compounds present. The copper strip corrosion test is designed to assess the relative degree of corrosivity of a petroleum product. 1.1x00a0;This test method covers the determination of the corrosiveness to copper of aviation gasoline, aviation turbine fuel, automotive gasoline, cleaners (Stoddard) solvent, kerosine, diesel fuel, distillate fuel oil, lubricating oil, and natural gasoline or other hydrocarbons having a vapor pressure no greater than 1248201;kPa (188201;psi) at 37.88201;x00b0;C. (Warningx2014;Some products, particularly natural gasoline, may have a much higher vapor pressure than would normally be characteristic of automotive or aviation gasolines. For this reason, exercise extreme caution to ensure that the pressure vessel used in this test method and containing natural gasoline or other products of high vapor pressure is not placed in the 1008201;x00b0;C (2128201;x00b0;F) bath. Samples having vapor pressures in excess of 1248201;kPa (188201;psi) may develop sufficient pressures at 1008201;x00b0;C to rupture the pressure vessel. For any sample having a vapor pressure above 1248201;kPa (188201;psi), use Test Method D1838.) 1.2x00a0;The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 1.1, 7.1, and Annex A2. 1.4x00a0;This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
信息：ICS：77.060 CCS：H25 发布：2018 实施：

ASTM D130-10 用铜带试验测定石油产品对铜腐蚀性的标准试验方法
简介：
信息：ICS：77.060 CCS： 发布：2010-11-01 实施：

NF M41-007-1998 液化石油气.对铜的腐蚀性.铜带试验
简介：
信息：ICS：75.160.30 CCS：E46 发布：1998-10-01 实施：1998-10-05

ASTM D7095-17 使用一次性铜箔带快速测定石油产品对铜的腐蚀性的标准试验方法
简介：
信息：ICS：77.060 CCS： 发布：2017-10-01 实施：

ASTM D130-2010 用铜条变色法检测石油产品对铜腐蚀性的标准试验方法
简介：Crude petroleum contains sulfur compounds, most of which are removed during refining. However, of the sulfur compounds remaining in the petroleum product, some can have a corroding action on various metals and this corrosivity is not necessarily related directly to the total sulfur content. The effect can vary according to the chemical types of sulfur compounds present. The copper strip corrosion test is designed to assess the relative degree of corrosivity of a petroleum product.1.1 This test method covers the determination of the corrosiveness to copper of aviation gasoline, aviation turbine fuel, automotive gasoline, cleaners (Stoddard) solvent, kerosine, diesel fuel, distillate fuel oil, lubricating oil, and natural gasoline or other hydrocarbons having a vapor pressure no greater than 124 kPa (18 psi) at 37.8x00B0;C. (WarningSome products, particularly natural gasoline, may have a much higher vapor pressure than would normally be characteristic of automotive or aviation gasolines. For this reason, exercise extreme caution to ensure that the pressure vessel used in this test method and containing natural gasoline or other products of high vapor pressure is not placed in the 100x00B0;C (212x00B0;F) bath. Samples having vapor pressures in excess of 124 kPa (18 psi) may develop sufficient pressures at 100x00B0;C to rupture the pressure vessel. For any sample having a vapor pressure above 124 kPa (18 psi), use Test Method D1838.) 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. For specific warning statements, see 1.1, 7.1, and Annex A2.
信息：ICS：77.060 CCS：E30 发布：2010 实施：

ISO 2160:1998 石油产品——对铜和煤灰的腐蚀性；铜带试验
简介：
信息：ICS：75.080 CCS： 发布：1998-09-10 实施：

GOST R 57039-2016 液化石油气. 铜条腐蚀性的测定
简介：
信息：ICS：75.160.30 CCS： 发布：2016 实施：2017-07-01

ASTM D7095-04(2009) 使用一次性铜箔带快速测定石油产品对铜的腐蚀性的标准试验方法
简介：
信息：ICS：77.060 CCS： 发布：2009-12-01 实施：

ISO 2160-1998 石油产品 对铜的腐蚀性 铜片腐蚀试验
简介：This International Standard specifies a method for the determination of the corrosiveness to copper of liquid petroleum products and certain solvents. Volatile products, having a maximum vapour pressure of 124 kPa at 37,8 ℃ are included.Volatile products with a vapour pressure above 124 kPa at 37,8 ℃ should be tested according to ISO 6251 (see caution below). Electrical insulating oils should be tested according to ISO 5662.CAUTION — Some products, particularly natural gasolines, may have a significantly higher vapour pressure than is characteristic for their class, even if below 124 kPa at 37,8 ℃. For this reason, extreme caution should be exercised to ensure that the pressure vessel containing such material is not placed in a bath at 100 ℃. Such samples may develop sufficient pressure at 100 ℃ to rupture the pressure vessel and cause damage and/or injury.
信息：ICS：75.080 CCS：H25 发布：1998-09 实施：

GOST R 57039-2016 液化石油气. 铜条腐蚀性的测定
简介：
信息：ICS：75.160.30 CCS：E46 发布：2016 实施：2017-07-01

ASTM A690/A690M-07 用于海洋环境的具有耐大气腐蚀性的高强度低合金镍 铜 磷钢H桩和板桩的标准规范
简介：
信息：ICS：93.140 CCS： 发布：2007-03-01 实施：

TIS 1182.12-1998 石油和石油产品的标准试验方法.第12部分:用铜带试验测定对铜的腐蚀性
简介：
信息：ICS：75.080 CCS： 发布：1998-08-14 实施：

ASTM D7095-04(2014) 使用一次性铜箔带快速测定石油产品对铜的腐蚀性的标准试验方法
简介：
信息：ICS：77.060 CCS： 发布：2014-05-01 实施：

ASTM D1838-2007 液化石油(LP)气对铜条腐蚀性的标准试验方法
简介：Copper corrosion limits provide assurance that difficulties will not be experienced in deterioration of the copper and copper-alloy fittings and connections that are commonly used in many types of utilization, storage, and transportation equipment.1.1 This test method covers the detection of the presence of components in liquefied petroleum gases which may be corrosive to copper. For an equivalent copper strip test applicable to less volatile petroleum products, see Test Method D 130.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 6.1, 9.3.1, and Annex A1.
信息：ICS：77.060 (Corrosion of metals) CCS：H25;E46 发布：2007 实施：

DIN EN ISO 6251-1998 液化石油气.对铜的腐蚀性.铜片试验
简介：
信息：ICS：75.160.30 CCS：E46 发布：1998-08 实施：

ASTM D1838-2014 液化石油(LP)气对铜条腐蚀性的标准试验方法
简介： 5.1x00a0;Copper corrosion limits provide assurance that difficulties will not be experienced in deterioration of the copper and copper-alloy fittings and connections that are commonly used in many types of utilization, storage, and transportation equipment. 1.1x00a0;This test method covers the detection of the presence of components in liquefied petroleum gases which can be corrosive to copper. Note 1:x00a0;For an equivalent copper strip test applicable to less volatile petroleum products, see Test Method D130. 1.2x00a0;The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 7.1, 10.3.1, and Annex A1.
信息：ICS：77.060 (Corrosion of metals) CCS：E46 发布：2014 实施：

TCVN 2694-2007 石油产品.通过铜带试验测定对铜的腐蚀性的试验方法
简介：
信息：ICS： CCS： 发布：2007 实施：

ISO 6251:1996 液化石油气——对铜和煤灰的腐蚀性；铜带试验
简介：
信息：ICS：75.160.30 CCS： 发布：1996-11-07 实施：

ASTM A690/A690M-13a 用于海洋环境的具有耐大气腐蚀性的高强度低合金镍 铜 磷钢H桩和板桩的标准规范
简介：
信息：ICS：93.140 CCS： 发布：2013-11-01 实施：

BS 2000-112-2005 石油及其产品的试验方法.测定润滑脂对铜腐蚀性.铜片法
简介：This standard describes a method for the detection of substances corrosive to copper in lubricating greases under static conditions. It does not correlate with greases operating under dynamic conditions.NOTE 1 - As lubricating greases are employed under a diversity of conditions, it is not possible to specify either the temperature or the duration of the test, but it is recommended that the temperature be not higher than 20 °C below the drop point of the sample.NOTE 2 - In conformity with prevailing practice copperstrip has been described as the test metal but other metals may be used and forms other than strips may be used.
信息：ICS：75.100 CCS：E34 发布：2006-01-12 实施：2006-01-12

ISO 6251-1996 液化石油气 对铜的腐蚀性 铜片试验
简介：Describes a method for the determination of the corrosiveness to copper of liquefied petroleum gases (LPG).
信息：ICS：75.160.30 CCS：E20 发布：1996-11 实施：

ASTM A690/A690M-13 用于海洋环境的具有耐大气腐蚀性的高强度低合金镍 铜 磷钢H桩和板桩的标准规范
简介：
信息：ICS：93.140 CCS： 发布：2013-10-01 实施：

ASTM A690/A690M-05 用于海洋环境的具有耐大气腐蚀性的高强度低合金镍 铜 磷钢H桩和板桩的标准规范
简介：
信息：ICS：93.140 CCS： 发布：2005-12-01 实施：

DS/EN ISO 6251-1995 液化石油气．对铜的腐蚀性．铜片试验
简介：This International Standard specifies a method for the detec-tion of the corrosiveness to copper of liquefied petroleum gases.NOTE — For an equivalent copper strip test applicable to less volatile petroleum products, see ISO 2160.
信息：ICS： CCS： 发布：1995-06-16 实施：

GOST ISO 2160-2013 石油产品. 铜条腐蚀性的测定
简介：
信息：ICS：75.080 CCS： 发布：2013 实施：2015-01-01

ASTM D7095-04 使用一次性铜箔带快速测定石油产品对铜的腐蚀性的标准试验方法
简介：
信息：ICS：77.060 CCS： 发布：2004-11-01 实施：

NF M41-007-1995 液化石油气.对铜的腐蚀性.铜片试验
简介：
信息：ICS： CCS：E46 发布：1995-06 实施：1995-05-05

GOST 32329-2013 石油制品. 铜条腐蚀性的测定
简介：
信息：ICS：75.080 CCS： 发布：2013 实施：2015-01-01

ASTM D130-04e1 用铜带试验测定石油产品对铜腐蚀性的标准试验方法
简介：
信息：ICS：75.080 CCS： 发布：2004-05-01 实施：

JIS K2513-1991 石油产品.铜的腐蚀性.铜带试验
简介：
信息：ICS：77.060;77.150.30 CCS：E30 发布：1991-01-01 实施：

KS M ISO 2160-2012(2017) 石油产品.对铜的腐蚀性.铜片试验
简介：
信息：ICS：75.080 CCS： 发布：2012-12-14 实施：

ASTM D130-04 用铜带试验测定石油产品对铜腐蚀性的标准试验方法
简介：
信息：ICS：77.060 CCS： 发布：2004-05-01 实施：

SIS SS-ISO 6251-1990 液化石油气．铜腐蚀性．铜条试验
简介：This International Standard specifies a method for the detec-tion of the corrosiveness to copper of liquefied petroleum gases.NOTE — For an equivalent copper strip test applicable to less volatile petroleum products, see ISO 2160.
信息：ICS： CCS： 发布：1990-06-06 实施：

KS M ISO 2160-2012(2022) 石油产品对铜的腐蚀性铜带试验
简介：
信息：ICS：75.080 CCS： 发布：2012-12-14 实施：

ASTM D7095-2004 用一次性铜箔带材快速测定铜耐石油制品腐蚀性的标准试验方法
简介：Crude petroleum contains sulfur compounds, most of which are removed during refining. However, of the sulfur compounds remaining in the petroleum product, some can have a corroding action on various metals, including copper, and this corrosivity is not necessarily related to the total sulfur content. The effect can vary according to the chemical types of sulfur compounds present. This copper foil strip corrosion test is designed to assess the relative degree of corrosivity of a petroleum product towards copper and copper-containing alloys using a shorter test duration than that specified in Test Method D 130. Some sulfur species may become corrosive to copper only at higher temperatures. Thus, higher test temperatures, particularly 100x00B0;C (212x00B0;F), may be used to test some products by the pressure vessel procedure.1.1 This test method covers the determination of the corrosiveness to copper of aviation gasoline, aviation turbine fuel, automotive gasoline, natural gasoline, or other hydrocarbons having a vapor pressure no greater than 124 kPa (18 psi), cleaners (for example, Stoddard solvent), kerosine, diesel fuel, distillate fuel oil, lubricating oil, and other petroleum products.1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are provided for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see 1.1, 6.1, and Annex A2.
信息：ICS：77.060 (Corrosion of metals); 77.120.30 (Copper an CCS：E30;A29 发布：2004 实施：

ASTM D3482-1990(2000) 使用粘结剂测定铜的电解腐蚀性的标准试验方法
简介：1.1 This test method covers the determination of whether an adhesive has any corrosive effect on copper. It is ordinarily intended to distinguish materials that might cause corrosion in electrical and electronic equipment. This procedure is a subjective test for which precision and accuracy have not been established. It is not recommended for adhesives on backing. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：83.180 (Adhesives) CCS： 发布：1990 实施：

ASTM D130-12 用铜带试验测定石油产品对铜腐蚀性的标准试验方法
简介：
信息：ICS：77.060 CCS： 发布：2012-11-01 实施：

ASTM D7095-2004(2014) 用一次性铜箔带材快速测定铜耐石油制品腐蚀性的标准试验方法
简介： 4.1x00a0;Crude petroleum contains sulfur compounds, most of which are removed during refining. However, of the sulfur compounds remaining in the petroleum product, some can have a corroding action on various metals, including copper, and this corrosivity is not necessarily related to the total sulfur content. The effect can vary according to the chemical types of sulfur compounds present. This copper foil strip corrosion test is designed to assess the relative degree of corrosivity of a petroleum product towards copper and copper-containing alloys using a shorter test duration than that specified in Test Method D130. 4.2x00a0;Some sulfur species may become corrosive to copper only at higher temperatures. Thus, higher test temperatures, particularly 100x00b0;C (212x00b0;F), may be used to test some products by the pressure vessel procedure. 1.1x00a0;This test method covers the determination of the corrosiveness to copper of aviation gasoline, aviation turbine fuel, automotive gasoline, natural gasoline, or other hydrocarbons having a vapor pressure no greater than 124 kPa (18 psi), cleaners (for example, Stoddard solvent), kerosine, diesel fuel, distillate fuel oil, lubricating oil, and other petroleum products. 1.2x00a0;The values stated in SI units are to be regarded as the standard. The values in parentheses are provided for information only. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 6.1, 10.1.1, and Annex A2.
信息：ICS：77.060 (Corrosion of metals); 77.120.30 (Copper an CCS：E30 发布：2004 实施：

SNI 06-0708-1989 石化产品. 抗铜腐蚀性能测试方法
简介：
信息：ICS：75.080 CCS： 发布：1989 实施：

ASTM A690/A690M-07(2012) 用于海洋环境的具有耐大气腐蚀性的高强度低合金镍 铜 磷钢H桩和板桩的标准规范
简介：
信息：ICS：93.140 CCS： 发布：2012-03-01 实施：

ASTM D130-2004 用铜条试验检测石油产品对铜腐蚀性的标准试验方法
简介：1.1 This test method covers the determination of the corrosiveness to copper of aviation gasoline, aviation turbine fuel, automotive gasoline, cleaners (Stoddard) solvent, kerosine, diesel fuel, distillate fuel oil, lubricating oil, and natural gasoline or other hydrocarbons having a vapor pressure no greater than 124 kPa (18 psi) at 37.8176;C. (Warning8212;Some products, particularly natural gasoline, may have a much higher vapor pressure than would normally be characteristic of automotive or aviation gasolines. For this reason, exercise extreme caution to ensure that the pressure vessel used in this test method and containing natural gasoline or other products of high vapor pressure is not placed in the 100176;C (212176;F) bath. Samples having vapor pressures in excess of 124 kPa (18 psi) may develop sufficient pressures at 100176;C to rupture the pressure vessel. For any sample having a vapor pressure above 124 kPa (18 psi), use Test Method D 1838.)1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. For specific warning statements, see 1.1, 6.1, and Annex A2.
信息：ICS：77.060 (Corrosion of metals) CCS：H25 发布：2004 实施：

CNS 8795-1988 电绝缘用热收缩套管铜腐蚀性试验法
简介：本标准适用于电绝缘用热收缩套管（以下简称为热收缩管）之铜腐蚀性试验。
信息：ICS：29.080.20 CCS： 发布：1988-09-14 实施：1988-09-14

ASTM D1838-2012a 以液化石油气(LP)确定铜条腐蚀性的标准试验方法
简介： 5.1x00a0;Copper corrosion limits provide assurance that difficulties will not be experienced in deterioration of the copper and copper-alloy fittings and connections that are commonly used in many types of utilization, storage, and transportation equipment. 1.1x00a0;This test method covers the detection of the presence of components in liquefied petroleum gases which can be corrosive to copper. Note 1x2014;For an equivalent copper strip test applicable to less volatile petroleum products, see Test Method D130. 1.2x00a0;The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 7.1, 10.3.1, and Annex A1.
信息：ICS：77.060 (Corrosion of metals) CCS：E46 发布：2012 实施：

ASTM D7095-2004(2009) 用一次性铜箔带材快速测定铜耐石油制品腐蚀性的标准试验方法
简介：Crude petroleum contains sulfur compounds, most of which are removed during refining. However, of the sulfur compounds remaining in the petroleum product, some can have a corroding action on various metals, including copper, and this corrosivity is not necessarily related to the total sulfur content. The effect can vary according to the chemical types of sulfur compounds present. This copper foil strip corrosion test is designed to assess the relative degree of corrosivity of a petroleum product towards copper and copper-containing alloys using a shorter test duration than that specified in Test Method D130. Some sulfur species may become corrosive to copper only at higher temperatures. Thus, higher test temperatures, particularly 100x00B0;C (212x00B0;F), may be used to test some products by the pressure vessel procedure.1.1 This test method covers the determination of the corrosiveness to copper of aviation gasoline, aviation turbine fuel, automotive gasoline, natural gasoline, or other hydrocarbons having a vapor pressure no greater than 124 kPa (18 psi), cleaners (for example, Stoddard solvent), kerosine, diesel fuel, distillate fuel oil, lubricating oil, and other petroleum products. 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are provided for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 6.1, 10.1.1, and Annex A2.
信息：ICS：77.120.30 (Copper and copper alloys) CCS：E30 发布：2004 实施：

SIS SS-ISO 2160-1987 石油产品．铜腐蚀性．铜条试验
简介：This international Standard specifies a method for the determination of the corrosive tendencies towards copper of petroleum products such as aviation gasoline,aviation turbine fuel,automotive gasoline,natural gasoline or other hydrocarbons having a Reid vapour pressure no greater than 124 kPa (1,24 bar),white spirits,cleaners (Stoddard) solvent,kerosene,diesel fuel,distillate heating oil,lubricating oil and certain other petroleum products.1)
信息：ICS： CCS： 发布：1987-12-25 实施：

ASTM D130-2012 用铜条试验检测石油产品对铜腐蚀性的标准试验方法
简介：5. Significance and UseTop Bottom 5.1 Crude petroleum contains sulfur compounds, most of which are removed during refining. However, of the sulfur compounds remaining in the petroleum product, some can have a corroding action on various metals and this corrosivity is not necessarily related directly to the total sulfur content. The effect can vary according to the chemical types of sulfur compounds present. The copper strip corrosion test is designed to assess the relative degree of corrosivity of a petroleum product. 1.1 This test method covers the determination of the corrosiveness to copper of aviation gasoline, aviation turbine fuel, automotive gasoline, cleaners (Stoddard) solvent, kerosine, diesel fuel, distillate fuel oil, lubricating oil, and natural gasoline or other hydrocarbons having a vapor pressure no greater than 124 kPa (18 psi) at 37.8??C. (Warning???Some products, particularly natural gasoline, may have a much higher vapor pressure than would normally be characteristic of automotive or aviation gasolines. For this reason, exercise extreme caution to ensure that the pressure vessel used in this test method and containing natural gasoline or other products of high vapor pressure is not placed in the 100??C (212??F) bath. Samples having vapor pressures in excess of 124 kPa (18 psi) may develop sufficient pressures at 100??C to rupture the pressure vessel. For any sample having a vapor pressure above 124 kPa (18 psi), use Test Method D1838.) 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. For specific warning statements, see 1.1, 7.1, and Annex A2.
信息：ICS：77.060 (Corrosion of metals) CCS：E30 发布：2012 实施：

ASTM D130-2004e1 用铜条试验检测石油产品对铜腐蚀性的标准试验方法
简介：Crude petroleum contains sulfur compounds, most of which are removed during refining. However, of the sulfur compounds remaining in the petroleum product, some can have a corroding action on various metals and this corrosivity is not necessarily related directly to the total sulfur content. The effect can vary according to the chemical types of sulfur compounds present. The copper strip corrosion test is designed to assess the relative degree of corrosivity of a petroleum product.1.1 This test method covers the determination of the corrosiveness to copper of aviation gasoline, aviation turbine fuel, automotive gasoline, cleaners (Stoddard) solvent, kerosine, diesel fuel, distillate fuel oil, lubricating oil, and natural gasoline or other hydrocarbons having a vapor pressure no greater than 124 kPa (18 psi) at 37.8176;C. (Warning8212;Some products, particularly natural gasoline, may have a much higher vapor pressure than would normally be characteristic of automotive or aviation gasolines. For this reason, exercise extreme caution to ensure that the pressure vessel used in this test method and containing natural gasoline or other products of high vapor pressure is not placed in the 100176;C (212176;F) bath. Samples having vapor pressures in excess of 124 kPa (18 psi) may develop sufficient pressures at 100176;C to rupture the pressure vessel. For any sample having a vapor pressure above 124 kPa (18 psi), use Test Method D 1838.)1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. For specific warning statements, see 1.1, 6.1, and Annex A2.
信息：ICS：77.060 (Corrosion of metals) CCS：H25 发布：2004 实施：

ISO 2160:1985 石油产品.对铜的腐蚀性.铜片试验
简介：
信息：ICS：75.080 CCS： 发布：1985-02-14 实施：

ASTM D1838-2012 以液化石油气(LP)确定铜条腐蚀性的标准试验方法
简介：5. Significance and UseTop Bottom 5.1 Copper corrosion limits provide assurance that difficulties will not be experienced in deterioration of the copper and copper-alloy fittings and connections that are commonly used in many types of utilization, storage, and transportation equipment. 1.1 This test method covers the detection of the presence of components in liquefied petroleum gases which can be corrosive to copper. Note 1???For an equivalent copper strip test applicable to less volatile petroleum products, see Test Method D130. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 7.1, 10.3.1, and Annex A1.
信息：ICS：77.060 (Corrosion of metals) CCS：H25 发布：2012 实施：

KS M ISO 6251-2003 液化石油气.对铜的腐蚀性.铜片试验
简介：이 규격은 액화 석유가스의 동판부식 시험 방법을 규정한다.
信息：ICS：75.160.30 CCS：E30 发布：2003-03-04 实施：2003-03-04

ISO 2160-1985 石油产品.对铜的腐蚀性.铜片试验
简介：
信息：ICS：5740 CCS：H25 发布：1985-02 实施：