astm法检测标准astm法-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

astm法相关标准参考信息

ASTM E502-21a 用闭杯法测定化学品闪点的ASTM标准的选择和使用的标准试验方法
简介：
信息：ICS：71.080.01 CCS：发布：2021-06-01 实施：

ASME SEC V B SE-309-2001 用磁饱和法检查钢管产品的标准规程.ASTM E309-83;已删除
简介：Boiler and Pressure Vessel.Standard Practice for Examination of Steel Tubular Products Using Magnetic Saturation ASTM E309-83; DELETED
信息：ICS： CCS：H26 发布：2001-07-01 实施：

AASHTO T 287-1997 采用核子法测定沥青混合料中沥青胶结料含量标准的试验方法HM-22;IIA部分;ASTM标准编号D 4125-92 R(2001)
简介：
信息：ICS： CCS：发布：1997 实施：

ASTM C1368-18 ASTM C 1296-2007用环境温度下恒定应力速率强度测试法测定高级陶瓷慢速裂纹生长参数的标准试验方法
简介：
信息：ICS：81.060.30 CCS：发布：2018-01-01 实施：

AASHTO T 152-2001 用压力法测定新搅拌混凝土中空气含量的标准试验方法HM-22;IIA部分;ASTM标准编号:C 231-97
简介：
信息：ICS： CCS：发布：2001 实施：

AASHTO T 179-1997 热和空气对沥青材料影响的标准试验方法(薄膜烘箱试验法)HM-22;IIA部分;ASTM标准编号:D 1754-94 R(2001)
简介：
信息：ICS： CCS：发布：1997 实施：

ASTM E2995-2015a 具有整合低危害温度计的ASTM温差比重计法的标准规格
简介：1.1x00a0;This specification covers glass thermohydrometers of various scale graduation systems, intended for use in a variety of ASTM Test Methods. 1.2x00a0;The thermohydrometers presented in this standard are not exact replacements for the thermohydrometers in Specification E100; the thermometers have larger maximum permissible scale errors than do their Hg-filled counterparts. The user should decide if these thermohydrometers are appropriate for use in his or her application. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS： CCS：发布：2015 实施：

AASHTO T 186-2001 水硬性水泥早硬性的标准试验方法(砂浆法)HM-22;IIA部分;ASTM标准编号:C 451-99
简介：
信息：ICS： CCS：发布：2001 实施：

AASHTO T 177-1997 混凝土的抗弯强度的标准试验方法(用中心荷载的简支梁法)HM-22;IIA部分;ASTM标准编号:C 293-94 R(2001)
简介：
信息：ICS： CCS：发布：1997 实施：

ASTM D4067-2011 用ASTM法增强和填充的聚苯硫醚(PPS)喷注模塑和挤压物料规格的标准分类体系和基础
简介：1.1 This classification system covers reinforced and filled poly(phenylene sulfide) materials suitable for injection molding and extrusion. 1.2 This classification system is not intended for the selection of materials, but only as a means to call out plastic materials to be used for the manufacture of parts. The selection of these materials shall be made by personnel with expertise in the plastics field where the environment, inherent properties of the materials, performance of the parts, part design, manufacturing process, and economics are considered. 1.3 The properties included in this classification system are those required to identify the compositions covered. If necessary, other requirements identifying particular characteristics important to specific applications shall be designated by using the suffixes given in Section 5 or Classification System D4000. 1.4 The values stated in SI units are to be regarded as the standard. 1.5 This precautionary statement pertains only to the test method portion of this classification system, Section 12. This standard does not purport to address all of the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 18212;There is no known ISO equivalent to this standard.
信息：ICS：83.120 CCS：G32;Q23 发布：2011 实施：

AASHTO T 185-2001 硅酸盐水泥早硬性的标准试验方法(砂浆法)HM-22;IIA部分;ASTM标准编号:C 359-99
简介：
信息：ICS： CCS：发布：2001 实施：

AASHTO T 53-1996 沥青软化点标准试验方法(环球法)HM-22;IIA部分;ASTM标准编号 D 36-95 R(2000)
简介：
信息：ICS： CCS：发布：1996 实施：

ASTM E592-99(2009)e1 钢板射线照相法获得的ASTM等效孔径灵敏度的标准指南<6> > 2分（6〜51毫米）厚X-光线和1至6英寸（25至152毫米）厚度与钴 - 60
简介：
信息：ICS：77.040.20 CCS：发布：2009-07-01 实施：

AASHTO T170-2000 标准试验方法回收溶液中阿森法的沥青试验.第20版;ASTM标准编号D1856-95A章
简介：
信息：ICS： CCS：发布：2000 实施：

ASTM R0063 ASTM D01.31和ISO TC35之间色素、燃料和补充剂标准测试法和规范的一致性(本文件不是ASTM标准,且仅提供PDF格式)
简介：1.1 This document was developed by ASTM D01.31 in concert with ISO TC35 SC2 and it is not an official ASTM or ISO document. It is published for information only. 1.2 The following is an attempt to show an appropriate relationship between the standards of the two organizations in this point and time. The document includes a list of ISO Standards and a description of each standard, as well as ASTM Standards and a description of each. 1.3 Users who may have comments or find errors in the concordance are invited to write to ASTM Subcommittee D01.31 in care of ASTM Headquarters. The comments will be reviewed by the Subcommittee Chairmen for decision.
信息：ICS： CCS：发布：实施：

ASTM D7448-2009 煤和焦炭样品制备及分析的ASTM法实验室性能评定的标准实施规程
简介：International standard ANS/ISO/IEC 17025 promotes the use of documented accountability and quality control procedures to assure a laboratory and its clients that the laboratory can produce technically valid data and results in the routine performance of its sampling, sample preparation and testing activities. A laboratory shall use ANSI/ISO/IEC 17025 to develop its quality system. Clause 4 of ANS/ISO/IEC 17025 specifies the requirements for sound management. Clause 5 of ANS/ISO/IEC 17025 specifies the requirements for technical competence for the type of tests or calibrations, or both the laboratory undertakes. In addition to complying with the requirements of ANS/ISO/IEC 17025, the Annex of this standard practice contains information that shall be considered important for the evaluation and operation of a competent Coal and Coke sampling or testing facility, or both. The information in this Annex is presented where it is not otherwise covered in ANS/ISO/IEC 17025 or the applicable ASTM methods. Laboratory clients, regulatory authorities, and accreditation bodies that recognize the competence of testing and calibration laboratories can use this standard practice as the basis for their evaluation. The primary significance of this practice is to establish that for a laboratory to generate measurements traceable to SI units, it must: Have a clear understanding of the work requested by the client. Meet the quality system requirements of the internationally accepted ANS/ISO/IEC 17025 standard. Use test methods which have been shown to be traceable to SI units of measurement Be able to demonstrate that the laboratory is in statistical control at the time the measurements are made.1.1 This practice specifies requirements to operate and evaluate the quality and management systems in a laboratory that provides services with respect to sample collection, sample preparation, or testing of coal, coke, and ash derived from coal or coke using ASTM standards that are under the jurisdiction of Committee D05 on Coal and Coke. Note 18212;The word x201C;laboratoryx201D; is used throughout this practice when referring to an organization that provides services in coal sampling or testing, or both. It is recognized, however, that the word may not be appropriate to an organization that does not perform actual laboratory sample testing. 1.2 International standard ANS/ISO/IEC 17025 shall be the governing document specifying requirements for management, technical competence and evaluation of a laboratory. Note 28212;An accrediting body or user of laboratory services can also impose technical or non-technical requirements not specifically addressed in ANS/ISO/IEC 17025 provided they do not invalidate the requirements of ANS/ISO/IEC 17025. 1.3 This practice is used to evaluate only those capabilites specifically claimed by a laboratory. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.160.10 (Solid fuels) CCS：D21 发布：2009 实施：

AASHTO T255-2000 用干燥法测定集料中可渗出水分总量的标准试验方法.第20版;ASTM C566-97
简介：
信息：ICS： CCS：发布：2000 实施：

ASTM R0079 瓦楞纸板的平压试验(挠性横梁法) (本文件不是ASTM标准,且仅提供PDF格式)
简介：1.1 The flat crush test (1) is a measure of the resistance of the flutes in corrugated board to a crushing force applied perpendicular to the surface of the board under prescribed conditions. The test is satisfactory for single-faced or single wall (double-faced) corrugated board, but not for double-wall or triple-wall corrugated board, because of lateral motion of the central facing or facings. This method is not intended for use in testing complex corrugated structures (for testing such structures see TAPPI Useful Method 810 "Leaning Flute Free (LFF) Flat Crush of Corrugated Board")
信息：ICS： CCS：发布：实施：

ASTM E502-2007e1 用密闭杯法确定化学药品闪点的ASTM标准的选择和使用的标准试验方法
简介：The flash point measures the response of the sample to heat and flame under controlled laboratory conditions. It is only one of a number of properties that must be considered in assessing the overall flammability hazard of a material. As a result of physical factors inherent in the apparatus and procedure, the closed cup flash point does not necessarily represent the minimum temperature at which a material can evolve flammable vapors, and the absence of a flash point does not guarantee nonflammability (see Appendix X1 and Appendix X2). Flash point is used in shipping and safety regulations to define flammable and combustible materials. Test Methods D 56, D 93, and D 3278 are specified as test methods for determining the flash point of these materials. 5.4 If the process or handling conditions dictate the usage of a flammable material at temperatures ranging upward from 5 to 10x00B0;C below the closed-cup flash point, then a flammable vapor might be present above the liquid. In such cases, it may be more appropriate to use the temperature limit of flammability (as determined by Test Method E 1232) instead of flash point. Small scale methods involving equilibrium procedures and only one flame pass per specimen are preferred.1.1 This test method covers the determination of the flash point of liquid and solid chemical compounds flashing from below x2212; 10 to 370x00B0;C (16 to 700x00B0;F). The procedures and apparatus in Test Methods D 56, D 93, D 3278, D 3828, and D 3941 are to be used. Modification to these procedures are specified for tests on solids and viscous liquids. The significance of the results obtained is discussed along with possible sources of error and factors that might cause interference. 1.2 Suggestions for adapting this procedure to mixtures of chemicals are included (see Appendix X2). 1.3 This test method should be used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials or assemblies under actual fire conditions. However, results of this test method may be used as elements of a fire risk assessment that take into account all of the factors that are pertinent to an assessment of the fire hazard of a particular end use. 1.4 WARNING x2013; Mercury has been designated by EPA and many state agencies as a hazardous material that can cause central nervous system, kidney and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPAx2019;s website x2013; http://www.epa.gov/mercury/faq.htm - for additional information. Users should be aware that selling mercury and/or mercury containing products into your state may be prohibited by state law. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See also Section 8.
信息：ICS：71.080.01 (Organic chemicals in general) CCS：E30 发布：2007 实施：

ASTM E592-99 钢板射线照相法获得的ASTM等效孔径灵敏度的标准指南<6> > 2分（6〜51毫米）厚X-光线和1至6英寸（25至152毫米）厚度与钴 - 60
简介：
信息：ICS：77.040.20 CCS：发布：1999-06-10 实施：

ASTM R0084 纸板压缩强度(环压法)(本文件不是ASTM标准,且仅提供PDF格式)
简介：1.1 The ring crush test correlates with edgewise compression strength of paperboard(1). 1.2 This method is intended for paperboard between 0.28 mm (0.011 in.) and 0.51 mm (0.020 in.) thick. It may be used with less reliability for paperboard as thin as 0.18 mm (0.007 in.), and as thick as 0.76 mm (0.030 in.). The short span compression test, TAPPI T 826 "Short Span Compressive Strength of Paperboard," measures edgewise compressive strength over a broader range of thickness. 1.3 Ring crush is also measured in TAPPI T 822 "Ring Crush of Paperboard (Rigid Support Method)," which uses a rigid platen compression machine instead of the flexing beam of this method.
信息：ICS： CCS：发布：实施：

ASTM E502-2007 用闭杯法测定化学制品闪点时选择和使用ASTM标准的标准试验方法
简介：The flash point measures the response of the sample to heat and flame under controlled laboratory conditions. It is only one of a number of properties that must be considered in assessing the overall flammability hazard of a material. As a result of physical factors inherent in the apparatus and procedure, the closed cup flash point does not necessarily represent the minimum temperature at which a material can evolve flammable vapors, and the absence of a flash point does not guarantee nonflammability (see Appendix X1 and Appendix X2). Flash point is used in shipping and safety regulations to define flammable and combustible materials. Test Methods D 56, D 93, and D 3278 are specified as test methods for determining the flash point of these materials. 5.4 If the process or handling conditions dictate the usage of a flammable material at temperatures ranging upward from 5 to 10x00B0;C below the closed-cup flash point, then a flammable vapor might be present above the liquid. In such cases, it may be more appropriate to use the temperature limit of flammability (as determined by Test Method E 1232) instead of flash point. Small scale methods involving equilibrium procedures and only one flame pass per specimen are preferred.1.1 This test method covers the determination of the flash point of liquid and solid chemical compounds flashing from below 10 to 370176;C (16 to 700176;F). The procedures and apparatus in Test Methods D 56, D 93, D 3278, D 3828, and D 3941 are to be used. Modification to these procedures are specified for tests on solids and viscous liquids. The significance of the results obtained is discussed along with possible sources of error and factors that might cause interference.1.2 Suggestions for adapting this procedure to mixtures of chemicals are included (see Appendix X2).1.3 This test method should be used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials or assemblies under actual fire conditions. However, results of this test method may be used as elements of a fire risk assessment that take into account all of the factors that are pertinent to an assessment of the fire hazard of a particular end use.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See also Section 8.
信息：ICS：71.080.01 (Organic chemicals in general) CCS：G04 发布：2007 实施：

ASTM E592-1999(2009)e1 用X射线法作1/4至2英寸(6-51 mm)厚钢板的射线照相及用钴-60作1至6英寸(25-152 mm)厚钢板的射线照相以获得ASTM等效穿透计敏感性的标准指南
简介：A key consideration with any radiographic system is its capability to resolve detail (that is, sensitivity). The degree of obtainable sensitivity with a given system is dependent upon several radiographic parameters such as source energy level, film type, type and thickness of intensifying screens, exposure (density), etc. This guide permits the user to estimate the degree of sensitivity that may be obtained with X rays and cobalt-60 gamma rays when using a prescribed set of radiographic parameters. This guide may also be used in conjunction with Test Method E 746 to provide a basis for developing data for evaluation of a user''s specific system. This data may assist a user in determining appropriate parameters for obtaining desired degrees of radiographic system sensitivity. An alternate to this approach is the use of those adjunct radiographic illustrations detailed in Section 6.1.1 This guide to obtainable equivalent penetrameter sensitivity covers the minimum penetrameter thicknesses for which the image of the 1T and 2T holes is visible for a few practical radiographic conditions. The values represent near optimum sensitivity for flat steel plates. Radiographic conditions that give higher values of scatter buildup from the specimen or backscattered radiation at the image plane will give poorer sensitivity. 1.2 Eight radiographs that illustrate sensitivities obtainable with practical radiographic systems are included as adjuncts to this guide and may be obtained from ASTM. 1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：77.040.20 (Non-destructive testing of metals) CCS：H26 发布：1999 实施：

简介： 信息：

ASME SEC V B SD-129-2003 石油产品中硫含量的标准测试法(通用氧弹法).ASTM D129-00
简介：Boiler and Pressure Vessel.Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) ASTM D129-00
信息：ICS： CCS：E30 发布：2003-07-01 实施：

ASTM E592-1999 用X射线法做1/4 in至2 in(6-51mm)厚钢板的射线照相及用钴-60做1 in至6 in (25-152mm)厚钢板的射线照相以获得ASTM等效X光硬度测量计灵敏度的标准指南
简介：1.1 This guide to obtainable equivalent penetrameter sensitivity covers the minimum penetrameter thicknesses for which the image of the 1T and 2T holes is visible for a few practical radiographic conditions. The values represent near optimum sensitivity for flat steel plates. Radiographic conditions that give higher values of scatter buildup from the specimen or backscattered radiation at the image plane will give poorer sensitivity. 1.2 Eight radiographs that illustrate sensitivities obtainable with practical radiographic systems are included as adjuncts to this guide and may be obtained from ASTM. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：77.040.20 (Non-destructive testing of metals) CCS：H26 发布：1999 实施：

简介： 信息：

ASME SEC V B SE-797.2-2003 手动超声脉冲反射接触法的厚度测量规程.ASTM E797-95 (R2001)
简介：Boiler and Pressure Vessel.Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method ASTM E797-95 (R2001)
信息：ICS： CCS：H26 发布：2003-07-01 实施：

ASTM E592-1999(2004) 用X射线法做1/4 in至2 in(6-51mm)厚钢板的射线照相及用钴-60做1 in至6 in (25-152mm)厚钢板的射线照相以获得ASTM等效X光硬度测量计灵敏度的标准指南
简介：A key consideration with any radiographic system is its capability to resolve detail (that is, sensitivity). The degree of obtainable sensitivity with a given system is dependent upon several radiographic parameters such as source energy level, film type, type and thickness of intensifying screens, exposure (density), etc. This guide permits the user to estimate the degree of sensitivity that may be obtained with X rays and cobalt-60 gamma rays when using a prescribed set of radiographic parameters. This guide may also be used in conjunction with Test Method E 746 to provide a basis for developing data for evaluation of a userrsquo;specific system. This data may assist a user in determining appropriate parameters for obtaining desired degrees of radiographic system sensitivity. An alternate to this approach is the use of those adjunct radiographic illustrations detailed in Section 6.1.1 This guide to obtainable equivalent penetrameter sensitivity covers the minimum penetrameter thicknesses for which the image of the 1T and 2T holes is visible for a few practical radiographic conditions. The values represent near optimum sensitivity for flat steel plates. Radiographic conditions that give higher values of scatter buildup from the specimen or backscattered radiation at the image plane will give poorer sensitivity.1.2 Eight radiographs that illustrate sensitivities obtainable with practical radiographic systems are included as adjuncts to this guide and may be obtained from ASTM.1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in brackets are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：77.040.20 (Non-destructive testing of metals) CCS：H26 发布：1999 实施：

简介： 信息：

ASME SEC V B SE-1419.2-2003 用声发射法检验无缝、充气压力容器的标准试验方法.ASTM E1419-00
简介：Boiler and Pressure Vessel.Standard Test Method for Examination of Seamless, Gas-Filled Pressure Vessels Using Acoustic Emission ASTM E1419-00
信息：ICS： CCS：H26 发布：2003-07-01 实施：

ASTM E204-98(2002) 用ASTM编码带和化学分类指数用红外吸收光谱法鉴定材料的标准实施规程
简介：
信息：ICS：71.040.40 CCS：发布：1998-12-10 实施：

简介： 信息：

ASME SEC V B SE-114.2-2003 接触法进行超声脉冲回波直射检验的操作规程.ASTM E114-95 (R2001)
简介：Boiler and Pressure Vessel.Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method ASTM E114-95 (R2001)
信息：ICS： CCS：H26 发布：2003-07-01 实施：

ASTM E204-98 用ASTM编码带和化学分类指数用红外吸收光谱法鉴定材料的标准实施规程
简介：
信息：ICS： CCS：发布：1998-12-10 实施：

简介： 信息：

ASME SEC V B SD-808-2003 新的和使用过的石油产品中氯含量的标准试验方法(氧弹法).ASTM D808-00
简介：Boiler and Pressure Vessel.Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method) ASTM D808-00
信息：ICS： CCS：E30 发布：2003-07-01 实施：

ASTM E204-1998(2007) 根据ASTM编码带及化学分类索引用红外线吸收光谱法进行材料的鉴别的标准实施规程
简介：1.1 These practices cover a data system generated from 1955 through 1974. It is in world-wide use as the largest publicly available data base. It is recognized that it does not represent the optimum way to generate a new data base with the most modern computerized equipment.1.2 These practices describe procedures for identification of individual chemical substances using infrared absorption spectroscopy and band indexes of spectral data. Use of absorption spectroscopy for qualitative analysis has been described by many (), but the rapid matching of the spectrogram of a sample with a spectral data in the literature by use of a band index system designed for machine sorting was contributed by Kuentzel (). It is on Kuentzel''s system that the ASTM indexes of absorption spectral data are based.1.3 Use of these practices requires, in addition to a recording spectrometer and access to published reference spectra, the encoded data and suitable data handling equipment.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：71.040.40 CCS：G04 发布：1998 实施：

简介： 信息：

ASME SEC V B SD-1552-2003 石油产品中硫含量的标准测试法(高温法).ASTM D129-00
简介：Boiler and Pressure Vessel.Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method) ASTM D1552-00
信息：ICS： CCS：E30 发布：2003-07-01 实施：

ASTM E204-1998(2002) 根据ASTM编码带及化学分类索引用红外线吸收光谱法进行材料的鉴别的标准规程
简介：1.1 These practices describe a data system generated from 1955 through 1974. It is in world-wide use as the largest publicly available data base. It is recognized that it does not represent the optimum way to generate a new data base with the most modern computerized equipment.1.2 These practices describe procedures for identification of individual chemical substances using infrared absorption spectroscopy and band indexes of spectral data. Use of absorption spectroscopy for qualitative analysis has been described by many (1-8), but the rapid matching of the spectrogram of a sample with a spectral data in the literature by use of a band index system designed for machine sorting was contributed by Kuentzel (9). It is on Kuentzel's system that the ASTM indexes of absorption spectral data are based.1.3 Use of these practices requires, in addition to a recording spectrometer and access to published reference spectra, the encoded data and suitable data handling equipment.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：71.040.40 (Chemical analysis) CCS：G04 发布：1998 实施：

简介： 信息：

ASME SEC V B SE-432-2003 泄漏测试法选择用标准建议指南.ASTM E432-71(R1984)
简介：Boiler and Pressure Vessel.Standard Recommended Guide for the Selection of a Leak Testing Method ASTM E432-71(R1984); DELETED
信息：ICS： CCS：H26 发布：2003-07-01 实施：

ASTM E204-1998 根据ASTM编码带及化学分类索引用红外线吸收光谱法进行材料的鉴别的标准规程
简介：1.1 These practices describe a data system generated from 1955 through 1974. It is in world-wide use as the largest publicly available data base. It is recognized that it does not represent the optimum way to generate a new data base with the most modern computerized equipment. 1.2 These practices describe procedures for identification of individual chemical substances using infrared absorption spectroscopy and band indexes of spectral data. Use of absorption spectroscopy for qualitative analysis has been described by many (1-8), but the rapid matching of the spectrogram of a sample with a spectral data in the literature by use of a band index system designed for machine sorting was contributed by Kuentzel (9). It is on Kuentzel's system that the ASTM indexes of absorption spectral data are based. 1.3 Use of these practices requires, in addition to a recording spectrometer and access to published reference spectra, the encoded data and suitable data handling equipment. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS： CCS：G04 发布：1998 实施：

简介： 信息：

ASTM D4067-2003 增强和填充的聚苯硫醚(PPS)喷射成形和挤压材料用ASTM法标准分类体系
简介：1.1 This classification system covers reinforced and filled poly(phenylene sulfide) materials suitable for injection molding and extrusion.1.2 This classification system is not intended for the selection of materials, but only as a means to call out plastic materials to be used for the manufacture of parts. The selection of these materials shall be made by personnel with expertise in the plastics field where the environment, inherent properties of the materials, performance of the parts, part design, manufacturing process, and economics are considered.1.3 The properties included in this classification system are those required to identify the compositions covered. If necessary, other requirements identifying particular characteristics important to specific applications shall be designated by using the suffixes given in Section 5 or Classification System D 4000.1.4 The values stated in SI units are to be regarded as the standard.1.5 This precautionary statement pertains only to the test method portion of this classification system, Section 12. This standard does not purport to address all of the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.Note 18212;There is no known ISO equivalent to this standard.
信息：ICS：83.120 (Reinforced plastics) CCS：G32 发布：2003 实施：

AASHTO T 11-1997 用冲洗法测定矿物集料中细于200号筛孔(75μm)的材料的标准试验方法HM-22;IA部分;ASTM标准编号C 117-95 R(2000)
简介：
信息：ICS： CCS：发布：1997 实施：

简介： 信息：

AASHTO T 295-2002 用比重计法测定液体沥青的比重或API度的标准试验方法HM-22;IIA部分;ASTM标准编号D 3142-97
简介：
信息：ICS： CCS：发布：2002 实施：

ASTM D4182-1997(2004) 煤和焦炭取样及分析的ASTM法实验室评定标准实施规程
简介：This practice provides guidelines to be followed by an individual or an accrediting body in evaluating a laboratoryrsquo;capability to perform those functions only for which the laboratory claims competence. A laboratory for the purpose of this practice may be considered as any facility capable of carrying out one or more of the following functions relevant to coal or coke, or both: 3.1.1 Sampling, 3.1.2 Sample preparation, 3.1.3 Chemical analysis, and 3.1.4 Physical testing.1.1 This practice is limited to the evaluation of laboratories using ASTM procedures that are under the jurisdiction of Committee D05 on Coal and Coke. They may be used to evaluate a laboratory''s capability to perform the functions for which it has been established. It is not the intention that this practice be used to evaluate capabilities beyond those specifically claimed by the laboratory.
信息：ICS：03.120.20 CCS：D21 发布：1997 实施：

简介： 信息：

ASME SEC V B SE-1220-2001 用可移动溶剂法进行可视渗透检验的标准试验方法.ASTM E1220-87;已删除
简介：Boiler and Pressure Vessel.Standard Test Method for Visible Penetrant Examination Using the Solvent-Removable Process ASTM E1220-87; DELETED
信息：ICS： CCS：H26 发布：2001-07-01 实施：

AASHTO T 97-1997 混凝土抗弯强度的标准试验方法(用3点荷载简支梁法) HM-22;IIA部分;ASTM标准编号 C 78-94 R(2001)
简介：
信息：ICS： CCS：发布：1997 实施：

简介： 信息：

ASTM D4182-1997 煤和焦炭采样及分析的ASTM法实验室评定
简介：1.1 This practice is limited to the evaluation of laboratories using ASTM procedures under the jurisdiction of Committee D-5 on Coal and Coke. They may be used to evaluate a laboratory's capability to perform the functions for which it has been established. It is not the intention that this practice be used to evaluate capabilities beyond those specifically claimed by the laboratory.
信息：ICS：03.120.20 (Product and company certification. Conf CCS：D21 发布：1997 实施：

简介： 信息：

ASME SEC V B SE-1219-2001 用可移动溶剂法进行荧光渗透检验的标准试验方法.ASTM E1219-87;已删除
简介：Boiler and Pressure Vessel.Standard Test Method for Fluorescent Penetrant Examination Using the Solvent-Removable Process ASTM E1219-87; DELETED
信息：ICS： CCS：H26 发布：2001-07-01 实施：

AASHTO T 229-1997 固体沥青和地沥青密度标准试验方法(变位法)HM-22;IIB部分;ASTM D 71-94(1999)R(2000)
简介：
信息：ICS： CCS：发布：1997 实施：

简介： 信息：